Hello, i am making this topics so the experienced devs can make overclockable kernel for Defy Mini. Since it is rooted now, i guess it shouldn't be too hard to do it...and guys, please don't say:,,Do it yourself'' because i am not into developing and I really can't do it.
Thanks in advance.
Bump bumpity bump.
Hmmm... Bootloader is still locked.
Related
hi guys!
i think it's time to try again cm9
which rom do you suggest me?? which one has the best compromise between stability/bugs/performances??
thanks guys!!
ah i have a defy+!
byebye
daede86 said:
hi guys!
i think it's time to try again cm9
which rom do you suggest me?? which one has the best compromise between stability/bugs/performances??
thanks guys!!
ah i have a defy+!
byebye
Click to expand...
Click to collapse
DO NOT start new threads asking for "the best" nightlies. It changes all the time, and everybody will give you a completely different answer.
But since you have a defy+, the obvious is to flash a Defy+ build (gb kernel). Quarx is the only developer who owns a defy+, and his nightlies are the best. For daily use they are rock stable. No force-closes, no reboots, just perfect. Original thread: Voilà!
FuZZ__'s kangs are good too with even more features added. Check out the thread here
sorry i didn't wanted to open a new huge discusion
ok then i'll try the quartx one! and maybe later the kang!
thanks!
Don't worry. I probably overreacted!
Sent from my MB526 using Tapatalk 2
downloading fuzz version!
afaik eppys builds are quite stable too. whats the difference between them (except the obvious kernel difference)? any feature differences, does one support hwa better than the other? i have a red lensed defy, so i can move between kernels.
sent from my cm7 defy...
Hey Guys,
Sorry I'm clearly not up to this task but after having fun with my Defy that was already running a pikachu edition rom, I had updated it to 2.4.20 and then thought I'd like to try CM10 JB...now I feel like a wally as I flashed the kernel/rom in recovery (CWM I think?) and it crashes quite a bit etc so I wanted to go back to MIUI.. however I cannot.. as each time I install it locks on the motorola screen - I assume this is because of the kernel? can I not find the correct (or can someone point me to) 2.3.4? or whichever kernel and just flash it then flash MIUI again?
I've red the all in one guide etc and have not yet had any experience with RSDLITE etc but have it installed and ready - I guess I'm just not even sure what SBF to even flash - if I even need to at all?
all advice well appreciated!
log0r said:
Hey Guys,
I flashed the kernel/rom in recovery (CWM I think?) and it crashes quite a bit etc
all advice well appreciated!
Click to expand...
Click to collapse
Can you describe what exactly is happening?
Before you flash another random rom wait and give people on forum a chance to help you. It might be a tiny issue easy to solve
Hello! I created a new xda account with my new gmail account, anyways, I used to have a verizon fascinate and am no stranger to device tampering. My name is Gabriel and am a huge fun of the nexus 7! anyways, so i flashed over Clemsyn1.5extremeUndervoltedFINAL.zip using google nexus 7 tookit and twrp recovery. I received an OTA update getting me to JZO54 a while back and i think this is my issue. After the flash, it went to boot up and was stuck at the x screen the whole 8 hours i was asleep! i would very much like this kernel to work because im tired of choppy framerates! If someone has been in this situtation and has a kernel suggestion and maybe "how to" guidance. Im in the team win recovery project ready to flash kernel but i dont know how to install a zip that isnt already in my internal storage! this is where im stuck. I also would like an overclocked 1.5 cpu/gpu to 600 kernel if possible, thats what the original one i had tried to flash was. Please help me install another kernel and let me know where to get this kernel and links would be appreciated!!! i know this is a great community and hope to hear from someone today or soon
Welcome! Clemsyn's kernel currently doesn't work with Android 4.1.2, only 4.1.1 you need to flash another kernel.
brando56894 said:
Welcome! Clemsyn's kernel currently doesn't work with Android 4.1.2, only 4.1.1 you need to flash another kernel.
Click to expand...
Click to collapse
thank you! yes i figured that out the hard way..... but what i need help with is flashing another kernel without being able to mount my tablet to my computer so i can move the new zip file with the kernel in it. also, i can go back to stock but i have been looking for a moderate cpu kernel like 1.5 and a gpu clock off 600, i dont know if this is only available to clemsyn's but just figured i would ask
brando56894 said:
Welcome! Clemsyn's kernel currently doesn't work with Android 4.1.2, only 4.1.1 you need to flash another kernel.
Click to expand...
Click to collapse
Clemsyn's kernel was updated a few days ago to work with 4.1.2, and I can verify that it works very well. I believe he started a new thread that has a link for the new kernel.
O2Blevel said:
Clemsyn's kernel was updated a few days ago to work with 4.1.2, and I can verify that it works very well. I believe he started a new thread that has a link for the new kernel.
Click to expand...
Click to collapse
thanks for that info! ill give a search but a link would be appreciated. Its seeming to get hard and harder to find info with the mass of topics around here. Anyways, i still do not know how to do this. can someone please help me? haha my issue is
HOW DO I FLASH A ZIP WITH TEAM WIN RECOVERY WHEN I CANNOT MOUNT MY TABLET TO MY COMPUTER THUS THE ZIP NOT BEING IN THE ROOT OF THE TABLET? IS THERE A WAY TO FLASH ANOTHER KERNEL WHILE I AM STUCK IN EITHER FASTBOOT OR ENDLESS LOOP BOOT WITH THE X IN THE SCREEN? I DONT KNOW HOW TO FLASH A ZIP IN THIS SITUATION. I KNOW HOW TO FLASH IT NORMALLY WHEN I AM IN ANDROID AND CAN PUT THE ZIP INSIDE THE ROOT AND FIND IT IN TEAM WIN AND FLASH BUT NOT WHEN I CANT MOUNT. IS THIS UNDERSTOOD?
im sorry for the caps hahaha i guess im just frustrated. It seems no one understands my main question
In recovery connected to PC type in cmd
Adb push filename.zip /sdcard/
Also apologizing for caps and typing haha doesn't make it any less annoying.
Sent from my Galaxy Nexus using xda premium
Metallice said:
In recovery connected to PC type in cmd
Adb push filename.zip /sdcard/
Also apologizing for caps and typing haha doesn't make it any less annoying.
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
ha, now now no need to be rude here. I was stating that it was frustrating that people seemed to have over looked my main question and was simply emphasizing, my apologies if its a pet peeve of yours. I figure you must be some sort of wiz Metallice, and i appreciate your help! I have a program ive been using to root called nexus 7 toolkit. I looked around and found this ( Flashable kernel from 4.1.2 JZO54K http://dl.dropbox.com/u/12008411/ker...per-jzo54k.zip ) which is the stock kernel it states atleast, and this.. ( ClemsynELITEBatterySaverStock.zip ) which is a battery saving kernel. Im sure you know this, but I was looking to overclock my device to hopefully 1.5 ghz with a 600mhz gpu. It might be asking a bit much, but was hoping someone would be able to walk me through pushing the zip using the nexus 7 toolkit and finding a overclock kernel to flash over. This is what im having problems doing because i am quite new to the nexus 7 and the programs used! only way to be good at something is to learn, please teach me so I can stop asking dumb questions and hopefully help someone in the future!
Bump for help needed!!
FoxHound22r said:
Bump for help needed!!
Click to expand...
Click to collapse
Don't bump, read the sticky threads: http://forum.xda-developers.com/showthread.php?t=1907796 and use your brain.
ha thanks for the help i guess. People on here sure are rude when they help you, im sorry if my bumping was not to your liking. I am new to this forum and this is a ****ty welcome ha. Not everyone is as smart as you when it comes to this stuff. Am i just expected to know terms and methods? i appreciate the help but am disappointed because i thought i was going to meet some nice helpful enthusiasts and have friendly conversations, but instead i just get half assed answers as if im supposed to know what im doing. This isnt ASUS's fault, its mine. But i was hoping to tamper and become a pro with atleast my device. Maybe I dont belong in the android game
Hi,
Got a new nexus 7, unlocked it and rooted it. Love it
Nexus 7: Version 4.2.1
Kernel Version: 3.1.10-g22b4fcd
Paranoid Android Version: 2.99
Build Number: Pa_grouper-userdebug 4.2.1 JOP40D
I found that when i scrolled down through web pages the browser was very glitchy, overall i found the processor to not quiet have that umph for smooth operations i expected.
So i decided to flash it with the "Elite Kernel" . System just got stuck in boot.
Not sure whether this kernel is suitable for the Rom installed!
Any advice in overclocking this device is much appreciated.
Cheers
Don't think elite works with 4.2 yet. Try the latest trinity kernel, it is working well for me.
Sent from my Nexus 7 using Tapatalk 2
Hello developers.
Can someone help me? I am 14 yrs and I am a newbie to rooting, hacking, etc.
I have rooted my stock Motorola Defy MB525 and now I want to install ICS or JB to my phone.
I am scared as I wont get another device if I brick this device but I want some updated os on my phone badly
I have not used any apps that use root access as I am pretty much scared that my phone could get bricked.
Can someone please give me a fully detailed and perfectly safe newbie guide along with downloads to install Ice Cream Sandwich
to my stock froyo rom on my Motorola Defy?
Thank you all in advance.
Here's a guide for you: http://forum.xda-developers.com/showthread.php?t=1908540
Sent from my MB526 using xda app-developers app
The guide is kind of complicated
domokos said:
Here's a guide for you: http://forum.xda-developers.com/showthread.php?t=1908540
Sent from my MB526 using xda app-developers app
Click to expand...
Click to collapse
I have never had much knowledge about Clockworkmod recovery and the guide is kind of complicated. Thanks for your help!
This is really a helpful guide you should consider before playing with your cell.
Here : http://forum.xda-developers.com/showthread.php?t=1216982 by Zephyrot
Thanks,..
kdarknight said:
This is really a helpful guide you should consider before playing with your cell.
Here : http://forum.xda-developers.com/showthread.php?t=1216982 by Zephyrot
Click to expand...
Click to collapse
thanks for the guide!
i figured out that i can actually flash sbf files if i messed up. so now my phone is running ics.
im running cm9 ics 4.0.4 on my defy but its really laggy. i use setvsel running at 1.2 GHz but no avail.
anyway thanks to everyone!
Simple question... How can I overclock this device?
I am currently running latest cm10 from nightly and I cannot overclock it probably because of the kernel....
Any suggestions/ideas about this issue will be gladly appreciated
*bump* I need a solution for overclocking this, someone, please post something!
If there is no custom kernel available for your device you probably are not going to overclock it for now.
Berat1337 said:
*bump* I need a solution for overclocking this, someone, please post something!
Click to expand...
Click to collapse
The following kernel for overcl... should work with cm build 7 and also for latest cm build...:
purity kernel
Don´t forget to make a backup before installing the kernel ...remember ..everything at your own risk ...
phreephiber said:
The following kernel for overcl... should work with cm build 7 and also for latest cm build...:
purity kernel
Don´t forget to make a backup before installing the kernel ...remember ..everything at your own risk ...
Click to expand...
Click to collapse
yep, i know.... didn't want to create a custom kernel since i dont have much info about the tolerance of the actual clock value... so thanks for your info...