Database Users

rom update fales!! Help!! dead as a rock!!

I just tride the romupdate DopodD800W on my MDA compact 111 T-Mobile en my little frend is dead as a rock!! no responce with activesync what so ever. It freezes at start. Please help me!!!

Put in bootloader and run the official T mOb update..it will b alive

how do I put it in bootloader?

Do a search on this forum!

I did and found it but still no connection what so ever so I can not install a new ROM.

monja72 said:
I did and found it but still no connection what so ever so I can not install a new ROM.
Click to expand...
Click to collapse
There are a lot similar messages in the forums at this site, all from people with bricked phones and waiting for a solution that is not here (yet). The easiest and quickest way to have your phone up and running again is to send it to either you provider or imei-check. But this will cost time and money. In the meantime, there are a lot of tips and tricks (not allways working though) in the various threads, you might give that a chance. What is the risk? I would say, there is not any, since your phone is allready dead and the warranty went out the window the moment you tried to flash another ROM.

I took the risk and went to the store and told them that my phone was dead after installing a program, they looked at it and just send it for repair, so far so good. hope it will come back alive. From now on no more risks!! thanks for your tips people!! Let you know when phone is back and fixed...

brick HD2 Return & Tmobile Policy ?

Hi All,
i installed HSPL2 2.8.0000 i think and i installed Kumar ROM. after a week i installed non tmobile ROM and my phone is dead. it does not show the phone is charging and it does not turn on at all. i try Volume + Power and nothing happens. if i get a replacement phone from tmobile, do you guys think they can find out what went with this phone ? can they hold me any legal terms ? what worst can happen if they find out ?
thanks

I work for tmo customer care and the worst case scenario is that you'll be charged a $100 out of warranty fee as the issue was caused by human error not the manufacturer. As far as I am aware there are no legal ramifications. Just call and say your phone won't turn on and you don't know why. They will run you through all the troubleshooting, just make them understand the issue is NOT with your battery or charger as they may want to replace those first if they believe its a power issue.

quite a lot of people have returned tmous in that condition, after flashing a .51. radio, and no one has said anything about any comebacks. The only people that have been charged are those who sent it back where you CAN get into bootloader, and they left hspl visible.
In your case they wont be able to get into bootloader, so you should be fine.

thank you all.
you guys are the best...

Bricked my tmous HD2
samsamuel said:
quite a lot of people have returned tmous in that condition, after flashing a .51. radio, and no one has said anything about any comebacks. The only people that have been charged are those who sent it back where you CAN get into bootloader, and they left hspl visible.
In your case they wont be able to get into bootloader, so you should be fine.
Click to expand...
Click to collapse
Hi there all,
Just want to confirm one thing as I have read over 100 posts and did not find a clear answer.
So I bricked my TMOUS HTC HD2 and I Have tried all ways to get into bootloader, but no luck (v. down + power) like a million times and every time I hook the phone to the PC i get the Qualcomm Diagnostics interface 3197 com port.
These where the steps I did before it got bricked:
1- Flashed using HSPL3 to 2.08.HSPL from SPL 2.08.0000
2- To change language I Installed the following ROM (_HTC HD2_RUU_Leo_HTC_ARA_1.66.415.4_Radio_Signed_15.30. 50.07U_2.06.51.07_Ship)
3- Got a message that phone was successfully flashed with the new ROM.
4- Phone got shutdown and bricked/dead
These are my phone details before I did any of the above as I saved them before I did anything in case of any damage and forgot to investigate radio issues hehehehehe:
Rom Version: 2.10.531.1 (82076) WWE
Rom Date:02/22/10
Manila Version:2.5.20121412.1
OS Version:5.2.21889 (21889.5.0.87)
Radio Version:2.08.50.08_2
After all the posts I read, I understand that my mistake was that I flashed My tmous HD2 with a .51 radio and that's the cause for the phone to brick.
My question is:
is it possible in any way for me or a tmous service center to enter into bootloader mood using any means. if no than I'm verrrrry happy cuz they will never be able to see the HSPL I flashed.
I would appreciate your confirmation. I know you mentioned it above that they can't, but just wanted to confirm before i send it to them.
Thanks to all the help we get from everyone here. Keep up the good work
***we live and learn***

Yes. Your situation is exactly the same as the OPs. Youre ok. Send it in. Get a new one.

help!!!!!
so i think i just bricked mt hd2, i was flashing the radio rom and now the phone wont do anything......
i was trying to find a radio that worked with android.
the Fing part is that this is the replace phone i just got in and now if i call back to tmobile will they be able to see what i did to the phone, cause they will press charges for misleading info
so plz help with any info
email- [email protected]
thanks

send it in and get another one!

yeah i bricked my hd2 tmobile usa as well. I went to install HSPL again after i took it off and it went trough fine then it crashed. I'm waiting for a new 1 to arrive soon then i will send mine back and hope they cant get into anything. Nothing comes on the screen no lights at all, so i hope i can by pass

Hi
Happen the some with me. I bricked my hd2 tmobile. The big problem is that im from portugal, and tmobile dont have any assistence here. If anyone have some ideas to put my phone back to normal, i appreciate a lot. Thanks
-------------------------------------
Sent via the XDA Tapatalk App

MLowed said:
Hi
Happen the some with me. I bricked my hd2 tmobile. The big problem is that im from portugal, and tmobile dont have any assistence here. If anyone have some ideas to put my phone back to normal, i appreciate a lot. Thanks
-------------------------------------
Sent via the XDA Tapatalk App
Click to expand...
Click to collapse
there is no such thing as a unbrick unless u send your phone to a expert who can do it them selves which you can search for in the forums

ok i have HTC HD2 512 don't know how many versions out there!(just know mine was somthings to do with asian one!) i flashed radio with Radio_Leo_2.15.50.14 and it went till 99% and stucked!i can get to bootloader screen but not be able to unbrick it! funny thing is after puling out my battry for about an houre magldr loads!
i followed forum.xda-developers.com/showthread.php?t=668347 but no nothin!
i want to bye jtag! any tutorial on how to use jtag to fix bricked hd2? or any idea on how to unbrick it without jtag?
thanks

Unbrick HD2 with JTAG HTC HD2/LEO

Hi Guys,
While searching for solutions to unbrick my HD2 TMOUS i came across this gadget.
It connects to the HD2's PCB directly without soldering. this connection adapter is available at http://www.multi-com.pl/index.php/en_US,details,id_pr,7912,menu_mode,categories.html which costs around $16. but the expensive part is the adapter that connects to the PC to flash the phone. this costs $229. http://www.multi-com.pl/index.php/en_US,details,id_pr,6503,menu_mode,categories.html
Its all expensive for an individual to buy these gadgets. but there is probably people or service centers who own these.
Do you know of any place where we can get this phones unbricked other than the HTC service centers?

Cool, looks like something that could be very useful.

Cool.. i knew somebody should be having it around here.. keep us updated..

ruwan7 said:
Cool.. i knew somebody should be having it around here.. keep us updated..
Click to expand...
Click to collapse
Will do.. I guess the device is as bricked as it can possibly be

what about riff jtag?
looks like a less expensive alternative...
anyone unbrick using this?

I just think only the JTAG can do it..
but who can try it?

giotown said:
what about riff jtag?
looks like a less expensive alternative...
anyone unbrick using this?
Click to expand...
Click to collapse
Users have been discussing RIFF over here

...I'm an Engineer; who has successfully unbricked a few HTC Universals using JTAG. I'm waiting for some bricked HD2's to come in the mail..I will reply with outcome sometime in the next few weeks...

Hi! I looking for someone trusted in UK who can repair my Leo (v.T-Mobile USA) after flashed new ROM with incorect radio. Please let me know if you know who can do it for reasonable price. I paid lots of money for the phone. Please. Regards.

hi there.. got my bricked hd2 repaired in India with ort-jtag.. now runnin as gud as new. jtag does work.. but this one's requires soldering & an expert technician.

Hi
Can you tell me the address, becoz i do have a bricked HD2.
Regards

Hello,
I've a bricked HTC HD2 1024LEO from US T-mobile I've unlocked and I've 2.02 ROM but can't anymore change... Can someone help me, I live in Belgium...

I also have bricked HD2 LEO phone and I need the full dump to flash it with jtag since it can not enter to boot mode anymore. and the SPL area is damaged too, now the only solution is to full flash it with JTAG.
I already have the ORT JTAG tool and the phone is connected OK to the JTAG interface but I do not have the full dump for this phone.
will be grat if anyone can send the full dump for it so that it can be revive, I already tried to search for the full dump but it is not there.
Best Regards

SPL is required at least partially to work in order to have JTAG working.

ana_ye said:
I also have bricked HD2 LEO phone and I need the full dump to flash it with jtag since it can not enter to boot mode anymore. and the SPL area is damaged too, now the only solution is to full flash it with JTAG.
I already have the ORT JTAG tool and the phone is connected OK to the JTAG interface but I do not have the full dump for this phone.
will be grat if anyone can send the full dump for it so that it can be revive, I already tried to search for the full dump but it is not there.
Best Regards
Click to expand...
Click to collapse
no need full dump enter support and download repair file .ort after uplaod..

I already tried the repair file from support area (there are three differant files and I tried them all) and it did not help because the phone have been flashed with HD2 512 dump file by mistake. now to revive it I need the full dump for 1024 version.
Best Regards.

EXEC/JASJAR said:
...I'm an Engineer; who has successfully unbricked a few HTC Universals using JTAG. I'm waiting for some bricked HD2's to come in the mail..I will reply with outcome sometime in the next few weeks...
Click to expand...
Click to collapse
what's the outcome of the unbricking? I also have recently bricked mine and am in need of help.

if u have try with Riff
ı will try for u read full dump but ı think it take very log time may be 12 hour full dump..
http://www.bestjtag.com/wp-content/uploads/IMAG0227.jpg

giotown said:
what about riff jtag?
looks like a less expensive alternative...
anyone unbrick using this?
Click to expand...
Click to collapse
I've used the Riff Box on my T-Mobile HD2. I'm not an electrical engineer so I also used the Multi-Com HD2 USA PCB. This worked perfectly and my device turned on again after three weeks being dead.
Cost me a lot for the postage of both items seperately to New Zealand (about NZ$120). There is a brick fix dll for the HD2 so its just a matter of reading the instructions and forums carefully before attempting the ressurection.
I suppose I would be happy to help anyone living on this side of the world.

yes it worcks
hi guys i did try the jiff jtag and it works , i contacted the guys at multicom and i send my phone there , they fix it and now it works perfect , all that i can say to you is please be more careful
good luck

[Q]droid x stuck in bootloader

http://www.droidforums.net/forum/dr...ota-new-bootloader-uses-new-signing-keys.html
the post that show the picture. thats whats going on with me phone. i don't know if there is a fix to that or sbf file etc. i need help please. thx in advance
i got the official ota 2,2
i called verizon and theyre shipping me a new one but my problem is the phone it self can't get pass boatloader. i mean since the tech wasn't able to help me hence sending me a new phone is there more testing they do at the factory that later on ill be charge because of something f up and voided the warranty. im just worried or it is a done deal and i shouldn't worry? anyone bricked thier phone and able to get a new one with no problem???

[B]B Solution for a birked htc hd 2 t-mobile[/B]

if you have a briked phone contact me! maybe i can help
this is for a briked phone !!!!
that means that the phone wont start , no lighit no nothing , just a notification in the pc when you put the cable that says ''qualcom.. etc''
i will tell you how i fix my hd2 t-mobile :
there is only 1 way that i know of and this is after weeks of searching .
you have to use a ''jtag'' box and a program ''riff''
everything that you need to know and see how is done is in youtube and you find it searching : HTC HD2 T-mobile US boot repair
this guys are in poland , and the site is www.multi-com.pl
i found them on youtube and i send my phone to them
have in mind that they sell products for fixing phones but is expensive
so i asked them if they want to help and fix
and they did a very good job
what you guys need to do is mail them and see how much is the shipment
for me it was more expensive to pay the shipment than to pay the phone repair
good luck !
if you have any other questions postem here ,
please for thous ho this is helpful leave a feedback
thank you

leave feedback
for all the people that fixed their phone please leave a feedback.

satellite000 said:
if you have a briked phone contact me! maybe i can help
Click to expand...
Click to collapse
ok i think i have bricked my phone ... it starts up but it stays on the htc screen....sometimes it loads up the rom after a few minutes but then it never passes the screen where it says "setting up the phone for first use".... how can u help????

jibbz said:
ok i think i have bricked my phone ... it starts up but it stays on the htc screen....sometimes it loads up the rom after a few minutes but then it never passes the screen where it says "setting up the phone for first use".... how can u help????
Click to expand...
Click to collapse
well your in luck , is not briked if it starts up , what you need to do is run a task 29 , then reflash your phone with a energy rom , that is what i use and is very good , good luck , let me know how it goes .

My phone stays on the htc screen and doesn't do anything else. I performed a Task 29 last night. And it did this to my htc hd 2 phone now it doesn't want to turn on I mean it does but it stays on the Stck Together screen. Should I call T-Mobile and get a new phone ? What should I do ?

QCRAZE said:
My phone stays on the htc screen and doesn't do anything else. I performed a Task 29 last night. And it did this to my htc hd 2 phone now it doesn't want to turn on I mean it does but it stays on the Stck Together screen. Should I call T-Mobile and get a new phone ? What should I do ?
Click to expand...
Click to collapse
well if your phone is in guaranty yes you can tell them that one day it just got stuck , don't mention anything about you trying to flash a rom ore that you played with it!!!! cuz they will not exchange anything.
BUT you can try this : get a Energy ROM from t-mobile hd2 rom development and flash it . if you dont know the proper steps please read posts with instructions how to properly flash it ,
after this if you did everything rite your phone should be ok .
i repeat if you phone dose turn on even if is an error ore it gets stuck , is still working and is not briked . so you can still fix it you self . if it dose not turn on no led no nothing then is briked , contact me if you have other questions
hope this helps u .

still a problem
ok i have done the task 29... i was really excited , i had this feeling it was going to work... but after the install i tryed putting a rom in ( an energy rom like u recommended) n it frizzes during the loading bar... i have tryed many time n it stops after a few loads... for example .. sometimes it goes to 24% n stops,... then i tryed again . it stoped at 56% ... n i kept on trying n it stops on various percentages what can be the problem??? plz help cuz i cant even use my phone at all

jibbz said:
ok i have done the task 29... i was really excited , i had this feeling it was going to work... but after the install i tryed putting a rom in ( an energy rom like u recommended) n it frizzes during the loading bar... i have tryed many time n it stops after a few loads... for example .. sometimes it goes to 24% n stops,... then i tryed again . it stoped at 56% ... n i kept on trying n it stops on various percentages what can be the problem??? plz help cuz i cant even use my phone at all
Click to expand...
Click to collapse
ok , look try this :
1 read this http://forum.xda-developers.com/showthread.php?t=653614
2 go to t-mobile official us site and get the latest rom . try to install it !!
by the way your phone was ok when you bouth it or it was freezing then also??

satellite000 said:
ok , look try this :
1 read this http://forum.xda-developers.com/showthread.php?t=653614
2 go to t-mobile official us site and get the latest rom . try to install it !!
by the way your phone was ok when you bouth it or it was freezing then also??
Click to expand...
Click to collapse
ok i have just tryed tht n it still freezes at different percentages...n no when i first got it i got it to flkash without anyproblem... n then an update came out for the energy rom so i decided to update after the update it worked for a few days or weeks n then it decided to keep freezing n all so i tryed a new rom n thts when it stops working now... n when i mean stop working i mean it stops the process in nthe middle or so

jibbz said:
ok i have just tryed tht n it still freezes at different percentages...n no when i first got it i got it to flkash without anyproblem... n then an update came out for the energy rom so i decided to update after the update it worked for a few days or weeks n then it decided to keep freezing n all so i tryed a new rom n thts when it stops working now... n when i mean stop working i mean it stops the process in nthe middle or so
Click to expand...
Click to collapse
well i think you have to send it back , if you have guaranty ore if not take it to a service , cuz i dont see why it sould not work after you did everything....
all i can say is just try 1 more time to install the rom from t-mobile , official !
but don't use nothing just install it , be careful , for t-mobile hd2 you need t-mobile rom from www.t-mobile.com!!!
good luck

hello, i have a tmob HD2 bricked phone. it completely wont turn on, even when charging no orange light. it would not detect by computer also.
maybe you could help me.
thanks!

Did you start restart computer?
satellite000 said:
well i think you have to send it back , if you have guaranty ore if not take it to a service , cuz i dont see why it sould not work after you did everything....
all i can say is just try 1 more time to install the rom from t-mobile , official !
but don't use nothing just install it , be careful , for t-mobile hd2 you need t-mobile rom from www.t-mobile.com!!!
good luck
Click to expand...
Click to collapse
1. Try re-starting the computer.
2. Charge your HD2 fully
3. Format an microSD card and try installing the image from SD Card
Best of luck.

kenter said:
hello, i have a tmob HD2 bricked phone. it completely wont turn on, even when charging no orange light. it would not detect by computer also.
maybe you could help me.
thanks!
Click to expand...
Click to collapse
i will tell you how i fix my hd2 t-mobile :
there is only 1 way that i know of and this is after weeks of searching .
you have to use a ''jtag'' box and a program ''riff''
everything that you need to know and see how is done is in here http://www.youtube.com/watch?v=XroEPU4qyuM&feature=related
this guys are in poland , and the site is www.multi-com.pl
i found them on youtube and i send my phone to them
have in mind that they sell products for fixing phones but is expensive
so i asked them if they want to help and fix
and they did a very good job
what you guys need to do is mail them and see how much is the shipment
for me it was more expensive to pay the shipment than to pay the phone repair
good luck !

satellite000 said:
if you have a briked phone contact me! maybe i can help
Click to expand...
Click to collapse
this is for a briked phone !!!!
that means that the phone wont start , no lighit no nothing , just a notification in the pc when you put the cable that says ''qualcom.. etc''
i will tell you how i fix my hd2 t-mobile :
there is only 1 way that i know of and this is after weeks of searching .
you have to use a ''jtag'' box and a program ''riff''
everything that you need to know and see how is done is in here http://www.youtube.com/watch?v=XroEPU4qyuM&feature=related
this guys are in poland , and the site is www.multi-com.pl
i found them on youtube and i send my phone to them
have in mind that they sell products for fixing phones but is expensive
so i asked them if they want to help and fix
and they did a very good job
what you guys need to do is mail them and see how much is the shipment
for me it was more expensive to pay the shipment than to pay the phone repair
good luck !
if you have any other questions postem here ,
please for thous ho this is helpful leave a feedback
thank you