Related
I hope someone knows the answer to this: Does the Thrive power devices and accessories from its main USB port? If I plug in a wireless mouse that has a data/charging cable for example, or want to charge my phone, or any other accessory.
Thanks!
deep9x said:
I hope someone knows the answer to this: Does the Thrive power devices and accessories from its main USB port? If I plug in a wireless mouse that has a data/charging cable for example, or want to charge my phone, or any other accessory.
Thanks!
Click to expand...
Click to collapse
Yes it does. Unlike some of the other devices that have a micro USB port, the Thrive's full sive USB port provides 5VDC standard power out like your PC. In fact, it will power multiple devices via a USB hub.
Awesome, is there any particular USB hub you'd recommend?
deep9x said:
Awesome, is there any particular USB hub you'd recommend?
Click to expand...
Click to collapse
No, any of them should work.
It seams that the change to the MHL cable is to allow USB on Go with the same cable
http://www.gottabemobile.com/2012/06/29/galaxy-s-iii-new-mhl-connector-also-enables-usb-on-go/
Mr_Maz said:
It seams that the change to the MHL cable is to allow USB on Go with the same cable
http://www.gottabemobile.com/2012/06/29/galaxy-s-iii-new-mhl-connector-also-enables-usb-on-go/
Click to expand...
Click to collapse
I had a bunch this was the case! Thanks for confirming.
Sent from my GT-I9300 using xda app-developers app
But how would one plug a usb cable into the hdmi port?
The_Biz said:
But how would one plug a usb cable into the hdmi port?
Click to expand...
Click to collapse
there is a MHL adapter that gives you a male 11 pin micro USB to female HDMI so you can just plug a standard male to male HDMI cable from adapter to TV.
see:
Samsung Galaxy S III MHL to HDMI adapter
Does anyone know if this new adapter will work with the Galaxy Nexus, as well? Also, does it charge the phone--or at least keep it from being drained--when USB OTG is being used? I've been looking for a way to use USB OTG with a flash drive on my GN while also charging/powering the phone. USB OTG is a real power hog.
It should, but on mine it doesn't.
I've got a new MHL cable and a USB OTG cable in the hope I could plug my MHL into the SGS3, use a powered USB hub connected to the Micro USB on the MHL and then connect a keyboard and mouse into the USB hub, then connect the HDMI to the TV.
For me it doesn't work. I thought this was the whole reason they changed the MHL cable to the new type. Can anyone else confirm?
Logicalstep
can we get an update on this situation here? How
can we get MHL AND USB OTG?
My reading of the link is that the micro USB port has been repinned to provide USB on the go and not that the cable allows for this.On the mhl cable there is a female HDMI port and a micro USB ( both female) which must be used by the charger.
If the usb connection is also female type, we have to use a usb otg cable to get it work. But at the moment my phone also wont recognize any devices -.-' only mhl and nothing else.
I bought this adapter for 25 euros and want to have it working.
I also asked samsung on facebook 'bout this problem, and everything the told me:
Go support site...
very helpful.
I hope the will enable this feature in a future update.
I have an andrid. Stick mx2 imito and I have a powered USB hub but I can't configure how I am meant to to get it to read from the hub. I have 2 ports on the stick, one full sized usb and one mini usb .
And In terms of devices I have my keyboard I want to add
1 external usb hard drive
And if I can get it to work a USB wifi dongle
Huh!
Since there is only one full sized USB port, I would think that is the solution. That's how it runs on mine anyway. Connect all your devices to the powered hub. Should be straight forward
So I would need a usb cable male to make? To connect to the hub. Do they exist ? I will try find the cable .
i cantget it to work
so the large usb port. i need a cable from that to connect to the hub? usb port
but i dont have a usb port with the same end? male to male etc
Get a USB powered hib
wakkaday said:
i cantget it to work
so the large usb port. i need a cable from that to connect to the hub? usb port
but i dont have a usb port with the same end? male to male etc
Click to expand...
Click to collapse
The hub will come with one male USB to connect to the stick.
http://gadgets.softpedia.com/images/news/How-to-Charge-your-USB-Devices-Quick-and-Easy-4.jpg
Make sure to get a powered hub so that all the devices can be supported properly.
gsurath said:
The hub will come with one male USB to connect to the stick.
http://gadgets.softpedia.com/images/news/How-to-Charge-your-USB-Devices-Quick-and-Easy-4.jpg
Make sure to get a powered hub so that all the devices can be supported properly.
Click to expand...
Click to collapse
this was an old hub i had, i dont have that wire. its a mini usb to full usb type connection isn't it?
Plenty of such options available
Here is another on ebay. Just search for powered USB hub and choose one
http://www.ebay.com/itm/10-PORT-USB-2-0-EXTERNAL-HUB-W-POWER-ADAPTER-FOR-PC-MAC-WITH-cable-SILVER-/370772094009?pt=US_USB_Cables_Hubs_Adapters&hash=item5653bd2c39
gsurath said:
Here is another on ebay. Just search for powered USB hub and choose one
http://www.ebay.com/itm/10-PORT-USB-2-0-EXTERNAL-HUB-W-POWER-ADAPTER-FOR-PC-MAC-WITH-cable-SILVER-/370772094009?pt=US_USB_Cables_Hubs_Adapters&hash=item5653bd2c39
Click to expand...
Click to collapse
ok great, so the port next to the power socket, is the cable i need to attach to and from the imito android stick? so that will be the main one and any other usb devices can go on the hub.
m confused on where i need to connect from on the android stick. which has 1 full sized usb, 1 mini usb otg socket and 1 mini usb (power)
It should also be possible to modify a USB hub to back feed power to the HDMI stick.
You would then power the hub with a sufficiently large USB power supply to power both the stick and all of the USB devices. In most cases, a single 2.1 Amp USB "wall wart" would work to power everything, unless you are really running something outrageous.
My NX003 (Same as MX1) can be powered from either the dedicated USB power jack, or the MicroUSB (OTG) connector.
So to build something like this, here is what I would do:
1. Obtain a USB hub I was willing to modify (destroy, as far as any other use is concerned)
2. Disassemble it.
3. Remove the input (Host) cable or connector.
4. Attach a short cable with a MicroUSB plug. Connect all 4 wires correctly.
5. Find "The diode" - Buy "The diode" I mean the one that that allows USB power to flow from the host to the peripherals when used in non-powered mode, but prevents power from flowing upstream to the host when an external power supply is used. (see referenced link).
6. Remove this diode, and replace it with a wire, jumper, or solder bridge.
7. Ensure all power circuity in the hub can handle 2 amps. Add solder to traces, or add jumper wire if needed to beef up current capability.
8. Reassemble, and clearly mark so that this hub is never used with anything else.
If the HDMI stick were powered via a coaxial connection, but is still powered by 5 Volts, I'd add a lead and coaxial plug off of the +5 in the hub. you'll have 2 wires, but it will still work. (Watch polarity.)
I have done this successfully for a prior, similar project. Reference Here: (Scroll to section about power.)
http://linuxslate.com/N770DockingStation.html
So why don't I actually do this to power my NX003? I did it an easier way. I bought a Tronsmart Prometheus. It has 3 full USB ports built-in.
-
Linuxslate said:
It should also be possible to modify a USB hub to back feed power to the HDMI stick.
You would then power the hub with a sufficiently large USB power supply to power both the stick and all of the USB devices. In most cases, a single 2.1 Amp USB "wall wart" would work to power everything, unless you are really running something outrageous.
My NX003 (Same as MX1) can be powered from either the dedicated USB power jack, or the MicroUSB (OTG) connector.
So to build something like this, here is what I would do:
1. Obtain a USB hub I was willing to modify (destroy, as far as any other use is concerned)
2. Disassemble it.
3. Remove the input (Host) cable or connector.
4. Attach a short cable with a MicroUSB plug. Connect all 4 wires correctly.
5. Find "The diode" - Buy "The diode" I mean the one that that allows USB power to flow from the host to the peripherals when used in non-powered mode, but prevents power from flowing upstream to the host when an external power supply is used. (see referenced link).
6. Remove this diode, and replace it with a wire, jumper, or solder bridge.
7. Ensure all power circuity in the hub can handle 2 amps. Add solder to traces, or add jumper wire if needed to beef up current capability.
8. Reassemble, and clearly mark so that this hub is never used with anything else.
If the HDMI stick were powered via a coaxial connection, but is still powered by 5 Volts, I'd add a lead and coaxial plug off of the +5 in the hub. you'll have 2 wires, but it will still work. (Watch polarity.)
I have done this successfully for a prior, similar project. Reference Here: (Scroll to section about power.)
http://linuxslate.com/N770DockingStation.html
So why don't I actually do this to power my NX003? I did it an easier way. I bought a Tronsmart Prometheus. It has 3 full USB ports built-in.
-
Click to expand...
Click to collapse
Thank you for the informatiom, but its a bit too technical for what i want... but i appreciate you efforts in writing this.
my stick can also power via both usb ports (mini) i have connected the cable from the stick to the hub which has been powered to the mains and it works, but the problem i have is when i put another usb device in the hub, it doesnt detect it e.g. keyboard wireless and i don't think the device has enough power to run my usb 2.0 portable harddrive (not main powered) - how can i get this to work? i have tried connecting this directly to the stick, but it just makes a beep sound. im guessing its lack of power... and i was hoping a hub would help.
my hub is powered 3.5 or 4 watts i believe...
Strange
Wakkaday,
This is very strange. On my MK802III I connect the powered USB hub (4 ports) to the full USB port.
I connect my bluetooth keyboard, 1 TB HDD and USB ethernet to the hub.
I power my Android stick using the 4rth port in the USB hub.
If I want USB audio, I replace the Ethernet/HDD with a USB audio peripheral.
All my peripherals work right out of the box. The only thing I am considering now is to have a separate power supply to the Android stick so that I can use all 4 ports on my hub.
It seems your device is not supporting the peripherals? Are the working when you connect directly?
gsurath said:
Wakkaday,
This is very strange. On my MK802III I connect the powered USB hub (4 ports) to the full USB port.
I connect my bluetooth keyboard, 1 TB HDD and USB ethernet to the hub.
I power my Android stick using the 4rth port in the USB hub.
If I want USB audio, I replace the Ethernet/HDD with a USB audio peripheral.
All my peripherals work right out of the box. The only thing I am considering now is to have a separate power supply to the Android stick so that I can use all 4 ports on my hub.
It seems your device is not supporting the peripherals? Are the working when you connect directly?
Click to expand...
Click to collapse
I'm also trying to use a powered 4 port usb hub with my android stick, but it doesnot recognises the hub. Do i need to have any usb host drivers or change any setting to get it work? My stick is on Android ICS.. Thanks in advance
Anybody figure out why the both charging port and charging cable that the phone comes with, have what looks like a double plug? One is a common micro USB port, and it seems that I can charge the phone with any old Android charger, as it will fit in this port. The other kind of looks like a USB port that you'd see on a digital camera. Just wondering what this is for, and why the provided cable has both.
Thanks in advance!
Airman1947 said:
Anybody figure out why the both charging port and charging cable that the phone comes with, have what looks like a double plug? One is a common micro USB port, and it seems that I can charge the phone with any old Android charger, as it will fit in this port. The other kind of looks like a USB port that you'd see on a digital camera. Just wondering what this is for, and why the provided cable has both.
Thanks in advance!
Click to expand...
Click to collapse
It's a USB 3.0 port and cable. It allows for faster data transfer speeds when connected to a USB 3.0 port on a computer.
It's backwards compatible with USB 2.0, which is why you can also use the other cables with the phone.
bsweetness said:
It's a USB 3.0 port and cable. It allows for faster data transfer speeds when connected to a USB 3.0 port on a computer.
It's backwards compatible with USB 2.0, which is why you can also use the other cables with the phone.
Click to expand...
Click to collapse
Oooooohhhh!! So that's what a micro USB 3.0 looks like! Cool, good to know. Thanks for the help.
bsweetness said:
It's a USB 3.0 port and cable. It allows for faster data transfer speeds when connected to a USB 3.0 port on a computer.
It's backwards compatible with USB 2.0, which is why you can also use the other cables with the phone.
Click to expand...
Click to collapse
Great post. I did used USB 2.0 in past. But after read your post i am appreciate for using USB 3.0 port and cable.. How can i get it from ?
bsweetness said:
It's a USB 3.0 port and cable. It allows for faster data transfer speeds when connected to a USB 3.0 port on a computer.
It's backwards compatible with USB 2.0, which is why you can also use the other cables with the phone.
Click to expand...
Click to collapse
You are half correct.... The right side is the micro usb port the left side is MHL 2.0, another version of HDMI out. You need a $13 adapter for this to work. Why Samsung put both on the same cable beats me.
Reference:
http://www.engadget.com/2014/04/11/samsung-galaxy-s5-review/
rwideman said:
You are half correct.... The right side is the micro usb port the left side is MHL 2.0, another version of HDMI out. You need a $13 adapter for this to work. Why Samsung put both on the same cable beats me.
Reference:
http://www.engadget.com/2014/04/11/samsung-galaxy-s5-review/
Click to expand...
Click to collapse
Not true.
MHL works through the standard microUSB portion of the plug, just like it does on many other devices. The additional thinner side is to accommodate the changes for USB 3.0. The Note 3 was the first phone to use a USB 3.0 cable and have a USB 3.0 Micro-B port on the device, and Samsung is following suit with the S5. Samsung has been supporting MHL 2.0 since the S4, which only had a standard microUSB port, so there was no need to switch to a new port design just for that. And if you look at the MHL adapter you mentioned, it has a standard microUSB plug. The HTC One, HTC One Max, and HTC One (M8) (among other devices) also have MHL 2.0, and do so through a standard microUSB port. The extended port on the S5 (and Note 3) is for USB 3.0. It's not there for MHL.
And the Engadget review that you linked doesn't support your post, rather it just notes that the port supports MHL (which it supports it through the standard microUSB portion of the port).
Interesting. I got my $12 adapter in today and sure nuff, it is usb port only. Thanks, now I find this out I think that is stupid of Samsung to put the USB 3.0 extension as another port. Not that I use it that often....
rwideman said:
Interesting. I got my $12 adapter in today and sure nuff, it is usb port only. Thanks, now I find this out I think that is stupid of Samsung to put the USB 3.0 extension as another port. Not that I use it that often....
Click to expand...
Click to collapse
There was no other way for them to add USB 3.0 functionality to the device while allowing backwards compatibility with microUSB 2.0. They wanted everyone to have the option of still being able to use their old microUSB 2.0 cables along with a different USB 3.0. I think it was definitely the right move instead of introducing a completely new plug that's not backwards compatible.
That said, a new USB 3.0 plug is coming that's not backwards compatible with USB 2.0 microUSB cables. It's been recently approved, but I'm not sure when we'll start seeing it on the devices.
rwideman said:
You are half correct.... The right side is the micro usb port the left side is MHL 2.0, another version of HDMI out. You need a $13 adapter for this to work. Why Samsung put both on the same cable beats me.
Reference:
http://www.engadget.com/2014/04/11/samsung-galaxy-s5-review/
Click to expand...
Click to collapse
Where can i buy the $13 adapter?
http://www.amazon.com/gp/product/B00ESM3Q7K/ref=oh_details_o00_s00_i00?ie=UTF8&psc=1
Check out the USB plug. See the blue plastic insert? Denotes SS super drives. Huge transfer speeds
Follow Me @Bash_array
I have not seen or heard what the micro usb will be used for on the NP....
The ADT-1 has a USB port and all it can be used for is a keyboard/mouse currently. I'd kill for OTG support. That said though, the ADT-1 also comes with a splitter for the power that adds an additional USB port to connect to your computer to access it via the SDK. So, it could be very much the same setup, or something completely different.
Interesting... You would think they would list the use for it.. maybe these OTG cables i have will come in handy..
It's been said that usb to ethernet adapters will work.
Read the update at https://plus.google.com/110558071969009568835/posts/dpSj5KtYP97
Hey pleasecan u help me in downgrading lg g3 stylus by saying the steps
Sent from my LG-D690 using XDA Forums
jestexman said:
I have not seen or heard what the micro usb will be used for on the NP....
Click to expand...
Click to collapse
You can connect an OTG cable to it. I connected a USB 3.0 HUB + Ethernet adapter to the OTG cable and connected my keyboard & mouse to the hub and a 64 GB micro SD card for extra storage. I also used the the ethernet port so now I don't need to connect through WiFi
lost2030 said:
You can connect an OTG cable to it. I connected a USB 3.0 HUB + Ethernet adapter to the OTG cable and connected my keyboard & mouse to the hub and a 64 GB micro SD card for extra storage. I also used the the ethernet port so now I don't need to connect through WiFi
Click to expand...
Click to collapse
What OTG cable and USB 3.0 HUB+Ethernet adapter are you using?
lschroeder said:
What OTG cable and USB 3.0 HUB+Ethernet adapter are you using?
Click to expand...
Click to collapse
I'm using a Ugreen OTG cable. I bought the 2 pack. The usb 3.0 hub is from Inateck. Links are below.
http://www.amazon.com/Ugreen®-Adapter-Samusung-Android-Function/dp/B00LN3LQKQ
http://www.amazon.com/Inateck-Gigab...id=1446168331&sr=1-2&keywords=inateck+usb+3.0