I have an andrid. Stick mx2 imito and I have a powered USB hub but I can't configure how I am meant to to get it to read from the hub. I have 2 ports on the stick, one full sized usb and one mini usb .
And In terms of devices I have my keyboard I want to add
1 external usb hard drive
And if I can get it to work a USB wifi dongle
Huh!
Since there is only one full sized USB port, I would think that is the solution. That's how it runs on mine anyway. Connect all your devices to the powered hub. Should be straight forward
So I would need a usb cable male to make? To connect to the hub. Do they exist ? I will try find the cable .
i cantget it to work
so the large usb port. i need a cable from that to connect to the hub? usb port
but i dont have a usb port with the same end? male to male etc
Get a USB powered hib
wakkaday said:
i cantget it to work
so the large usb port. i need a cable from that to connect to the hub? usb port
but i dont have a usb port with the same end? male to male etc
Click to expand...
Click to collapse
The hub will come with one male USB to connect to the stick.
http://gadgets.softpedia.com/images/news/How-to-Charge-your-USB-Devices-Quick-and-Easy-4.jpg
Make sure to get a powered hub so that all the devices can be supported properly.
gsurath said:
The hub will come with one male USB to connect to the stick.
http://gadgets.softpedia.com/images/news/How-to-Charge-your-USB-Devices-Quick-and-Easy-4.jpg
Make sure to get a powered hub so that all the devices can be supported properly.
Click to expand...
Click to collapse
this was an old hub i had, i dont have that wire. its a mini usb to full usb type connection isn't it?
Plenty of such options available
Here is another on ebay. Just search for powered USB hub and choose one
http://www.ebay.com/itm/10-PORT-USB-2-0-EXTERNAL-HUB-W-POWER-ADAPTER-FOR-PC-MAC-WITH-cable-SILVER-/370772094009?pt=US_USB_Cables_Hubs_Adapters&hash=item5653bd2c39
gsurath said:
Here is another on ebay. Just search for powered USB hub and choose one
http://www.ebay.com/itm/10-PORT-USB-2-0-EXTERNAL-HUB-W-POWER-ADAPTER-FOR-PC-MAC-WITH-cable-SILVER-/370772094009?pt=US_USB_Cables_Hubs_Adapters&hash=item5653bd2c39
Click to expand...
Click to collapse
ok great, so the port next to the power socket, is the cable i need to attach to and from the imito android stick? so that will be the main one and any other usb devices can go on the hub.
m confused on where i need to connect from on the android stick. which has 1 full sized usb, 1 mini usb otg socket and 1 mini usb (power)
It should also be possible to modify a USB hub to back feed power to the HDMI stick.
You would then power the hub with a sufficiently large USB power supply to power both the stick and all of the USB devices. In most cases, a single 2.1 Amp USB "wall wart" would work to power everything, unless you are really running something outrageous.
My NX003 (Same as MX1) can be powered from either the dedicated USB power jack, or the MicroUSB (OTG) connector.
So to build something like this, here is what I would do:
1. Obtain a USB hub I was willing to modify (destroy, as far as any other use is concerned)
2. Disassemble it.
3. Remove the input (Host) cable or connector.
4. Attach a short cable with a MicroUSB plug. Connect all 4 wires correctly.
5. Find "The diode" - Buy "The diode" I mean the one that that allows USB power to flow from the host to the peripherals when used in non-powered mode, but prevents power from flowing upstream to the host when an external power supply is used. (see referenced link).
6. Remove this diode, and replace it with a wire, jumper, or solder bridge.
7. Ensure all power circuity in the hub can handle 2 amps. Add solder to traces, or add jumper wire if needed to beef up current capability.
8. Reassemble, and clearly mark so that this hub is never used with anything else.
If the HDMI stick were powered via a coaxial connection, but is still powered by 5 Volts, I'd add a lead and coaxial plug off of the +5 in the hub. you'll have 2 wires, but it will still work. (Watch polarity.)
I have done this successfully for a prior, similar project. Reference Here: (Scroll to section about power.)
http://linuxslate.com/N770DockingStation.html
So why don't I actually do this to power my NX003? I did it an easier way. I bought a Tronsmart Prometheus. It has 3 full USB ports built-in.
-
Linuxslate said:
It should also be possible to modify a USB hub to back feed power to the HDMI stick.
You would then power the hub with a sufficiently large USB power supply to power both the stick and all of the USB devices. In most cases, a single 2.1 Amp USB "wall wart" would work to power everything, unless you are really running something outrageous.
My NX003 (Same as MX1) can be powered from either the dedicated USB power jack, or the MicroUSB (OTG) connector.
So to build something like this, here is what I would do:
1. Obtain a USB hub I was willing to modify (destroy, as far as any other use is concerned)
2. Disassemble it.
3. Remove the input (Host) cable or connector.
4. Attach a short cable with a MicroUSB plug. Connect all 4 wires correctly.
5. Find "The diode" - Buy "The diode" I mean the one that that allows USB power to flow from the host to the peripherals when used in non-powered mode, but prevents power from flowing upstream to the host when an external power supply is used. (see referenced link).
6. Remove this diode, and replace it with a wire, jumper, or solder bridge.
7. Ensure all power circuity in the hub can handle 2 amps. Add solder to traces, or add jumper wire if needed to beef up current capability.
8. Reassemble, and clearly mark so that this hub is never used with anything else.
If the HDMI stick were powered via a coaxial connection, but is still powered by 5 Volts, I'd add a lead and coaxial plug off of the +5 in the hub. you'll have 2 wires, but it will still work. (Watch polarity.)
I have done this successfully for a prior, similar project. Reference Here: (Scroll to section about power.)
http://linuxslate.com/N770DockingStation.html
So why don't I actually do this to power my NX003? I did it an easier way. I bought a Tronsmart Prometheus. It has 3 full USB ports built-in.
-
Click to expand...
Click to collapse
Thank you for the informatiom, but its a bit too technical for what i want... but i appreciate you efforts in writing this.
my stick can also power via both usb ports (mini) i have connected the cable from the stick to the hub which has been powered to the mains and it works, but the problem i have is when i put another usb device in the hub, it doesnt detect it e.g. keyboard wireless and i don't think the device has enough power to run my usb 2.0 portable harddrive (not main powered) - how can i get this to work? i have tried connecting this directly to the stick, but it just makes a beep sound. im guessing its lack of power... and i was hoping a hub would help.
my hub is powered 3.5 or 4 watts i believe...
Strange
Wakkaday,
This is very strange. On my MK802III I connect the powered USB hub (4 ports) to the full USB port.
I connect my bluetooth keyboard, 1 TB HDD and USB ethernet to the hub.
I power my Android stick using the 4rth port in the USB hub.
If I want USB audio, I replace the Ethernet/HDD with a USB audio peripheral.
All my peripherals work right out of the box. The only thing I am considering now is to have a separate power supply to the Android stick so that I can use all 4 ports on my hub.
It seems your device is not supporting the peripherals? Are the working when you connect directly?
gsurath said:
Wakkaday,
This is very strange. On my MK802III I connect the powered USB hub (4 ports) to the full USB port.
I connect my bluetooth keyboard, 1 TB HDD and USB ethernet to the hub.
I power my Android stick using the 4rth port in the USB hub.
If I want USB audio, I replace the Ethernet/HDD with a USB audio peripheral.
All my peripherals work right out of the box. The only thing I am considering now is to have a separate power supply to the Android stick so that I can use all 4 ports on my hub.
It seems your device is not supporting the peripherals? Are the working when you connect directly?
Click to expand...
Click to collapse
I'm also trying to use a powered 4 port usb hub with my android stick, but it doesnot recognises the hub. Do i need to have any usb host drivers or change any setting to get it work? My stick is on Android ICS.. Thanks in advance
Related
I hope someone knows the answer to this: Does the Thrive power devices and accessories from its main USB port? If I plug in a wireless mouse that has a data/charging cable for example, or want to charge my phone, or any other accessory.
Thanks!
deep9x said:
I hope someone knows the answer to this: Does the Thrive power devices and accessories from its main USB port? If I plug in a wireless mouse that has a data/charging cable for example, or want to charge my phone, or any other accessory.
Thanks!
Click to expand...
Click to collapse
Yes it does. Unlike some of the other devices that have a micro USB port, the Thrive's full sive USB port provides 5VDC standard power out like your PC. In fact, it will power multiple devices via a USB hub.
Awesome, is there any particular USB hub you'd recommend?
deep9x said:
Awesome, is there any particular USB hub you'd recommend?
Click to expand...
Click to collapse
No, any of them should work.
Hi all.
I heard that zte blade has the capability of USB HOST. Also heard it can't power the usb slave device attached to it. Instead of purchasing a usb power hub, i manually tried making a cable which has the similar function but draws power from PC usb port (don't know how far it works. I haven't been successful).
The description of the cable i made is in the picture attached below.
PLEASE SEE THE PICTURE ATTACHED.
For a device with native usb host (such as galaxy note) i guess the device USB-CABLE coupled with USB-FEMALE-TO-FEMALE-BRIDGE is enough to attach slave devices. But for the devices which cannot give power supply in USB HOST mode i assumed and tried the cable which was described in the picture.
Blade was my handset. My friend had galaxy note. I tried connecting blade as a slave to galaxy note with a NATIVE USB-OTG CABLE. But it said the slave device is high powered and needs seperate power supply. In such case i think the cable i prepared might work (if it works) replacing usb powered hub.
Ok, coming to our zte blade device. I prepared a usb female to female bridge and connected it to usb plug of usb cable. Then i connected only the data + and data - of USB PERIPHERAL DEVICE to zte blade. The VCC +5V (red) and GND (black) are supplied from a PC usb port.
And im sure i connected data+ to data+ only. And similarly (data- to data- only) , (vcc to vcc only) , (GND to GND only).
And i tested it with a usb keyboard and a memory card reader. I tested on cm7.1.0 because i heard this build has kernel supporting usb host (? Is it not?). Im unsuccessful with both tests. When i connected memory card reader the led light in the card reader turned on but i cant see any drive/folder/notification on m phone. And with usb keyboard there is not even NUM LOCK led on. Am i missing the kernel support or something. If so pls tell me what kernel should i use.
And is it the thing i prepared wont work at all.??
Please give me suggestions... Thanks.
WARNING :
This is not a (how-to-make-something) post. If you are experimenting with some cables, make sure that you connect the connections correctly. Changing polarity can brick your device. Im not responsible for anything.
Has anybody tried this: 1. Setup a powered USB hub plugged into the Micro OTG cable 2. hack the cable from right after the OTG cable to where it plugs into the hub, so that the voltage pins are exposed 3. solder in the voltage pins to a usb connector so you can plug in a normal charger [5V 2A] 4. check to see if you can use the USB hub and charge at the same time
I currently have a Asus transformer TF101 and the primary use is watching clips off a 500GB usb HDD. I really, really want to get a N7 and sell my TF101, but if charging & simultaneous host mode is not possible, I would be slightly hesitant to buy it, because I would be eating up the battery much faster than I would like.
Sent from my Nexus 7 using xda premium
An OTG cable is not for charging/connecting your device to a computer. Instead of usb micro to a male usb, it's micro to female usb, so you can plug in peripherals and flash drives etc. to your device.
Sent from my SGH-I777 using xda premium
When a normal USB is plugged in, the Nexus is in "slave" mode. Receives instructions.
When an OTG cable is plugged it allows it to be in "master" mode. Can give instructions.
Sent from my Nexus 7
Stop... MUFFIN TIME!!!
There are basically 3 types of cables you can plug into the USB port of a Nexus 7:
1. A normal USB-to-microUSB cable, plugged into a computer or a USB charger. Either way it charges, and if it is hooked to a computer the N7 is in Client Mode and you can transfer files as well.
2. High-current chargers (like the one that comes with the Nexus 7). The data lines on these are shorted together; this tells the Nexus to accept higher current on the power lines for faster charging.
3. OTG cables have the normal 4 wires on the USB end - two for power, two for data - but on the microUSB end there is a fifth connection called USBID. Normally (as when using a normal 4-wire USB cable) the USBID pin is floating, i.e. not hooked to anything. On an OTG cable, the USBID pin is connected to the ground wire. This tells the N7 that an OTG device is plugged in, which causes it to do two things: it reverses the current on the power lines - because it needs to power whatever you have plugged into the OTG cable, like a USB card reader or keyboard - and it switches the USB interface from Client Mode (which it uses when it is plugged into a computer, because in that instance the N7 is a peripheral device) to Host Mode (because in that instance the OTG device is the peripheral and the N7 is the 'computer').
There is one other option for charging: the pogo pins on the side. (The 4 pins are 5V, stereo left, stereo right, and ground.) Providing power to the pogo pins (as when it is put in a dock) tells the N7 to accept high current on the pogo pins. Momentarily connecting 5V to the right stereo channel tells the N7 that external speakers are connected and it starts driving audio out the two center pogo pins. When this is happening the charging takes place through the dock, the USB connector can be used with a data cable or an OTG device, but no charging takes place through USB when the dock is connected. (An OTG device is still powered by the N7, but current never goes the other way.)
Mechanio said:
There are basically 3 types of cables you can plug into the USB port of a Nexus 7:
1. A normal USB-to-microUSB cable, plugged into a computer or a USB charger. Either way it charges, and if it is hooked to a computer the N7 is in Client Mode and you can transfer files as well.
2. High-current chargers (like the one that comes with the Nexus 7). The data lines on these are shorted together; this tells the Nexus to accept higher current on the power lines for faster charging.
3. OTG cables have the normal 4 wires on the USB end - two for power, two for data - but on the microUSB end there is a fifth connection called USBID. Normally (as when using a normal 4-wire USB cable) the USBID pin is floating, i.e. not hooked to anything. On an OTG cable, the USBID pin is connected to the ground wire. This tells the N7 that an OTG device is plugged in, which causes it to do two things: it reverses the current on the power lines - because it needs to power whatever you have plugged into the OTG cable, like a USB card reader or keyboard - and it switches the USB interface from Client Mode (which it uses when it is plugged into a computer, because in that instance the N7 is a peripheral device) to Host Mode (because in that instance the OTG device is the peripheral and the N7 is the 'computer').
There is one other option for charging: the pogo pins on the side. (The 4 pins are 5V, stereo left, stereo right, and ground.) Providing power to the pogo pins (as when it is put in a dock) tells the N7 to accept high current on the pogo pins. Momentarily connecting 5V to the right stereo channel tells the N7 that external speakers are connected and it starts driving audio out the two center pogo pins. When this is happening the charging takes place through the dock, the USB connector can be used with a data cable or an OTG device, but no charging takes place through USB when the dock is connected. (An OTG device is still powered by the N7, but current never goes the other way.)
Click to expand...
Click to collapse
Dont forget a "y cable", which can charge and preform host mode (otg) at the same time, only at a slower charging rate. This is providing you are using a kernel that supports this function. "Otg+host mode charging"
Sent from my Nexus 7 using xda premium
I'm installing a 2013 Nexus 7 into my car. I plan to load Timur's ROM on it. I have an OTG cable. I've also purchase a USB Y cable and a USB hub which i'm waiting to be delivered. Will a USB Y cable separate power and data? meaning will one USB port have power and the other data? seeing as I want to connect the data to a USB hub, the hub itself will need 5V power too.
I've sketched up a little idea which is attached below. Can anyone tell me if such a thing will work?
The idea is to have +12v ignition wire and ground from the car going to a 12v > 5v converter. The output of that converter will then provide charging power to the Nexus via the + and ground wires on the OTG cable. This leaves the + and - data cables untouched. Then the idea is to take the + and - data cables directly to the USB hub. And seeing as the USB hub also requires 5V power through its main feed USB, i can provide the same 5V power thats coming from the 12v > 5v converter.
This is just an idea, not sure if it will actually work. Other thing I can do i just stick with the Y usb cable.
Any suggestions and comments would be greatly appreciated.
Thanks
Using active USB hub with +5V You do not need Y-cable, just standard OTG cable.
I'm using this config with ElementalX kernel with N7 as external navigator/videoreg.
I'd suggest to browse through "InDashboard install" threads in "N7 2013 -> General" board for other tips and tricks.