Hello,
I have a big huge problem so i havent slep all night but i cant resolve it.
I was fist on ICS official, so i want go back i have treid AfterOta
I have use Afterota and install HC bootloader, that gone okay, but whe i put a rom for my A501 its update wel after the update
it wont start anymore it gives Boot veriefied failed.
Then i try several Rom putteing on the sd kart but it not flashing anymore.
I am stuck now, please can anyone help me...:crying:
cebbes30 said:
Hello,
I have a big huge problem so i havent slep all night but i cant resolve it.
I was fist on ICS official, so i want go back i have treid AfterOta
I have use Afterota and install HC bootloader, that gone okay, but whe i put a rom for my A501 its update wel after the update
it wont start anymore it gives Boot veriefied failed.
Then i try several Rom putteing on the sd kart but it not flashing anymore.
I am stuck now, please can anyone help me...:crying:
Click to expand...
Click to collapse
To get back to stock you'll need to run an official a501 EUU - theres a thread in the dev forum by blackthund3r with a list of official Acer Roms -
you need an "EUU" AND I hope you have saved your cpuid from using afterOTA - you can't do anything now without it
dibb
I have download a full rom A501 first and install thats work great after booting up it wont start and give the error.
Yes i have olso save my Acer id tekst with spuid serial number like that.
But can you tell me which one i need to install a full or Euu
QUOTE=dibb_nz;36135657]To get back to stock you'll need to run an official a501 EUU - theres a thread in the dev forum by blackthund3r with a list of official Acer Roms -
you need an "EUU" AND I hope you have saved your cpuid from using afterOTA - you can't do anything now without it
dibb[/QUOTE]
theres only this one, which will take you all the way back to HC3.0.1
EUUs_SBK_Acer_A501_0.017.01_PA_ATT:
- if moscow desire is around he may be able to point you to a more recent version, but I havent seen him about lately he may be taking a well deserved holiday
The link for this is not working?
Any other options?
EUUs_SBK_Acer_A501_0.017.01_PA_ATT:
- if moscow desire is around he may be able to point you to a more recent version, but I havent seen him about lately he may be taking a well deserved holiday[/QUOTE]
Skrilax_CZ`s bootloader V8 Boot Menu HELP
Hello
I have come littel further, so i am now on the Skrilax_CZ`s bootloader V8 Bootmenu mode
option
Reboot
Fastboot Mode
Boot Primary Kernel Image
Boot Secondary Kernel Image
Boot Recovery
Set Boot Secondary kernel Image
Set Debug mode on
Wipe Cache.
So cany anyone tel me what i must do to root and install CWM recovery
so i can install then after custom roms?
I am nou again stuck
cebbes30 said:
Hello
I have come littel further, so i am now on the Skrilax_CZ`s bootloader V8 Bootmenu mode
option
Reboot
Fastboot Mode
Boot Primary Kernel Image
Boot Secondary Kernel Image
Boot Recovery
Set Boot Secondary kernel Image
Set Debug mode on
Wipe Cache.
So cany anyone tel me what i must do to root and install CWM recovery
so i can install then after custom roms?
I am nou again stuck
Click to expand...
Click to collapse
Well, that is good news, you're halfway there
This tutorial will give you some background on rooting and installing CWM http://forum.xda-developers.com/showthread.php?p=35500631#post35500631
But now you have the v8 and access to fastboot the first thing you should do is to hook your usb cable to your pc and run a command prompt from the fastboot folder (if you need help with doing that have a look in the cpuid guide linked in my sig). You want to wipe /data and /cache and then immediately flash an ICS custom rom...civato has a thread with official acer stock roms that will run on the v8 or you can choose a full custom one.
You should already have a custom recovery on your tab, if not, use fastboot to flash one after you did your wipes...then boot to it and flash your rom not an update.zip
i have hook the usb cable but i cant write somthing on the cmd
its noet working, i want to install CWM this was verry easy to use.
I dont now why its verry difficult to root and install a custom firmware on a Acer Iconia A500.
I have olso a Samsung galaxy tab, this was veryy easy to use after 3 minutes it was rooted and installed the CWM.
Boot verified failed and recovery verified failed
Hi Guys,
My Acer A500 is completely bricked, when i tried to enter the recovery mode (Volume - + Power) i am receiving recovery verified failed and when i try to reboot the tablet it says Boot verified failed, could you please help me in recovering the tablet.
cebbes30 said:
Hello,
I have a big huge problem so i havent slep all night but i cant resolve it.
I was fist on ICS official, so i want go back i have treid AfterOta
I have use Afterota and install HC bootloader, that gone okay, but whe i put a rom for my A501 its update wel after the update
it wont start anymore it gives Boot veriefied failed.
Then i try several Rom putteing on the sd kart but it not flashing anymore.
I am stuck now, please can anyone help me...:crying:
Click to expand...
Click to collapse
@ cebbes
Go to cpuid guide in my sig
You'll need the drivers installed correctly, there's a section showing how to do that....you'll need to flash the v8 bootloader to get cwm...its all in the guide
Sent from my GT-I9300 using Tapatalk 2
---------- Post added at 05:42 PM ---------- Previous post was at 05:35 PM ----------
jaga_n_jaga said:
Hi Guys,
My Acer A500 is completely bricked, when i tried to enter the recovery mode (Volume - + Power) i am receiving recovery verified failed and when i try to reboot the tablet it says Boot verified failed, could you please help me in recovering the tablet.
Click to expand...
Click to collapse
Hope you saved yr cpuid somewhere, you'll need it....
What Rom's did u flash??
u need to downggrade to hc using an euu. Download and instructions in the root guide in my sig
Sent from my GT-I9300 using Tapatalk 2
dibb_nz said:
Well, that is good news, you're halfway there
This tutorial will give you some background on rooting and installing CWM http://forum.xda-developers.com/showthread.php?p=35500631#post35500631
But now you have the v8 and access to fastboot the first thing you should do is to hook your usb cable to your pc and run a command prompt from the fastboot folder (if you need help with doing that have a look in the cpuid guide linked in my sig). You want to wipe /data and /cache and then immediately flash an ICS custom rom...civato has a thread with official acer stock roms that will run on the v8 or you can choose a full custom one.
You should already have a custom recovery on your tab, if not, use fastboot to flash one after you did your wipes...then boot to it and flash your rom not an update.zip
Click to expand...
Click to collapse
First to thanks to dibb_nz, civato, Moscow Desire & Heisenberg.
I have installed Skrilax CZ bootloader V8 on my TAB ( after six month trying )
Then Installed: CWM recovery v5.5 thor2002ro rev.1.7.3
showing: kernel 3.1.10-digetx-thor-4.4micro
Bootloader: 0.03.14-MUL
Active boot partition 1st boot partition set as default.
Not running HC bootloader, itsmagic not needed.
As per your instruction on (Skrilax CZ bootloader V8) wipes all the /data and /cache using fastboot method then reboot and after going to CWM recovery flashed Civato official acer Rom Acer_AV041_A500_1.041.00_WW_CUS1 from here http://forum.xda-developers.com/showthread.php?t=1633907.
But again my Tab is stuck on Skrilax CZ bootloader V8 bootmenu.
now help me what to do.
Related
Hello,
I have a serious problem with my tablet.
I can not run the OS and the tablet will not start even in recovery mode (pwr + vol up), when I try to reboot I always get the error:
bootloader Version 0.03.11-ICS(custom mode)
magic value mismatch....
The problem occurred after installing the ICS thor room V134 in conjunction with the replacement of Recovery (from CWM thor of 1.7 are passed to the RA Recvery)
Please anyone knows how to solve this problem. I tried reinstalling the CWM of Thor with this procedure:
http://forum.xda-developers.com/showthread.php?t=1522384
But the error on reboot (normal or recovery) is always the same.
please help me.
Ask Thor, he might be able to help you as it was with his applications it happened...
dunno whether this will work on your your device but i found the topic on another device section
http://forum.xda-developers.com/showthread.php?t=1497005
I really wanna install ICS 4.0.4 on my Defy+.
So I found this thread: http://forum.xda-developers.com/showthread.php?t=1432100
My Defy is rooted.
I installed CWM's ROM Manager.
I installed 2ndInit.
Now I know (correct me if I'm wrong) that we should place the zip files onto the SD card. --> Then, open CWM's ROM Manager --> Flash recovery --> [checks something on d internet and displays a bunch of devices. Defy is one of them] So I click on "Defy" ---> It tells me that CWM's recovery is not yet supported by Defy. ---> If i continue, it says "Have you previously installed custom recovery?" and then asks for the version. ---> still if I continue and start phone in recovery mode, It doesn't go in recovery mode. I just see a yellow exclamation mark in a white triangle with the android bot standing beside it.
What seems to be the problem ?
What should I do to install the ICS 4.0.4 on my device ?
Please help. Because I'm still a n00b.
I tried ignoring CWM's recovery and rebooted my device with 2ndInit's Custom Recovery mode and tried the steps in the (above) mentioned thread.
This results in a BootLoader 9.10 error: 1F, A3, etc. on reboot. So I had to flash the (rooted)stock sbf again.
I did it for 4-5 times. I feel like crying now.
Please help.
Update on the request
should i flash cm7.2 first and then upgrade to cm9 (ICS 4.0.4) ?
Please help guys.. please..
getfudged said:
should i flash cm7.2 first and then upgrade to cm9 (ICS 4.0.4) ?
Please help guys.. please..
Click to expand...
Click to collapse
U can directly flash CM9..
getfudged said:
still if I continue and start phone in recovery mode, It doesn't go in recovery mode. I just see a yellow exclamation mark in a white triangle with the android bot standing beside it.
Click to expand...
Click to collapse
If you see that robot, press both the volume up and down keys at the same time, then you should be in the recovery menu.
getfudged said:
I tried ignoring CWM's recovery and rebooted my device with 2ndInit's Custom Recovery mode and tried the steps in the (above) mentioned thread.
This results in a BootLoader 9.10 error: 1F, A3, etc. on reboot. So I had to flash the (rooted)stock sbf again.
Click to expand...
Click to collapse
Maybe you could try another version of bootmenu? If I remember correctly, you can choose, which one you want if you go into the 2ndInit app.
Hi!
I have tried to flash unlocked bootloader V3 from civato's guide, and I could not pass step 6 (flashing bootloader with nvflash or blacthund3r's tool). None of this method didn't work (Nvflasher didn't flash anything, and blackthunder tool was stuck at formating some partition (can't remeber which one).
Last successful step was flashing ICS rom (full leaked version of 1.031.00).
After that I could boot up, and rom worked all fine.
But, after that, I got my self in trouble.... I pressed Vol- & PWR, tablet did his thing, and when reeboted, I got stuck in Acer logo screen with red writing "Boot verified failed"
I understand that I have messed boot somehow... And to fix this i have to flash new bootloader through nvflash and apx mode. I tried to put update.zip on sd card, but it didn't helped (I still get boot verified failed)
Here, I got another problem. When I have connected tablet in apx mod to pc, i got message "driver not installed". Now, in devices I have "unspecified APX device".
BTW, adb doesn't see my device?!
I hope that You guys can help me with these problems, so that my tablet is operational an running again.
Thanks in advance!
boot verified
I have the same problem but I can not find the v3 bl and CWM Recovery Package to flash with the apx flash utility. If you find them let me know.
This what you have do:
Your recovery is borked so u have to put a new one on there, the best way to
go about doing this is to:
Download the V3 AND CWM Recovery package and apxFlash that.....Done!!
your need to flash the WHOLE PACKAGE b/c ARI reports yr BL as plain old stock
You cannot replace the failed recovery with CWM with the plain old stock BL!!
You have to flash the patched BL as well, so again
You must flash the whole pckg just like in the guide OK
if later u want the stock recovery back u can use ARI to do that but after the apxflash!!!
Thanks for your replay! I'l try to do this and hope it will work...
By "WHOLE PACKAGE" you mean unlocked bootloader and CWM? Or, something else?
Check this thread for V3 and CWM.
boot verified
Yes "WHOLE PACKAGE" unlocked bootloader and CWM
The tread you sent me I do not know how to use the nvflash never works for me.
I have been trying for 3 days and no luck.
Let me know if it works for you or how you make out
zozo10k said:
Hi!
I have tried to flash unlocked bootloader V3 from civato's guide, and I could not pass step 6 (flashing bootloader with nvflash or blacthund3r's tool). None of this method didn't work (Nvflasher didn't flash anything, and blackthunder tool was stuck at formating some partition (can't remeber which one).
Last successful step was flashing ICS rom (full leaked version of 1.031.00).
After that I could boot up, and rom worked all fine.
But, after that, I got my self in trouble.... I pressed Vol- & PWR, tablet did his thing, and when reeboted, I got stuck in Acer logo screen with red writing "Boot verified failed"
I understand that I have messed boot somehow... And to fix this i have to flash new bootloader through nvflash and apx mode. I tried to put update.zip on sd card, but it didn't helped (I still get boot verified failed)
Here, I got another problem. When I have connected tablet in apx mod to pc, i got message "driver not installed". Now, in devices I have "unspecified APX device".
BTW, adb doesn't see my device?!
I hope that You guys can help me with these problems, so that my tablet is operational an running again.
Thanks in advance!
Click to expand...
Click to collapse
Did you install acer usb drivers.
EDIT: SOLVED!
Mods, you can close this thread.
shaun298 said:
Did you install acer usb drivers.
Click to expand...
Click to collapse
Hi!
Yes, I have dl the drivers from Acer site and installed them. But pc only recognize tab in APX mode. And adb doesn't see my tab.
Every method that I have tried (APX flash tool and nvflash) hangs at some part. APX flash tool hangs at "Flashing bootloader EBT - stage two, and nvflash hangs at formating partition 4.
Hi, I´m having similar troubles to get acer drivers working on windows 7 32. I installed newest acer web drivers, ADB works OK. When I get to apx mode I need to manually point to drivers, I have an APX driver with a sign and turns to Acer Picasso USB Boot-recovery driver. The problem is that not any of the tools sees this as a connected tablet in apx mode (afterota or apxflash).
I am doing something wrong? I know a500manager shows me the tablet is in apx mode "please install drivers" when i get APX driver with Sign, after installing the driver manually it just doesn´t show connected anymore.
thanks
hernborc said:
Hi, I´m having similar troubles to get acer drivers working on windows 7 32. I installed newest acer web drivers, ADB works OK. When I get to apx mode I need to manually point to drivers, I have an APX driver with a sign and turns to Acer Picasso USB Boot-recovery driver. The problem is that not any of the tools sees this as a connected tablet in apx mode (afterota or apxflash).
I am doing something wrong? I know a500manager shows me the tablet is in apx mode "please install drivers" when i get APX driver with Sign, after installing the driver manually it just doesn´t show connected anymore.
thanks
Click to expand...
Click to collapse
Download and install the Google USB drivers.
Google.... Android USB Drivers, and you should get the page for the Android SDK with google drivers.
In Apx mode, go to device manager on your PC, and manually install the drivers. Don't let it search automatically, do it manually. If you get a compatibility warning, ignore it.
Should hook you up with normal, ADB and APX drivers.
zozo10k said:
EDIT: SOLVED!
Mods, you can close this thread.
Hi!
Yes, I have dl the drivers from Acer site and installed them. But pc only recognize tab in APX mode. And adb doesn't see my tab.
Every method that I have tried (APX flash tool and nvflash) hangs at some part. APX flash tool hangs at "Flashing bootloader EBT - stage two, and nvflash hangs at formating partition 4.
Click to expand...
Click to collapse
THANKS FOR NOT TELLING US HOW YOU SOLVED IT:good::good::good::good:
the problem is with Pepephone spanish carrier, i found a fix
http://www.elgrupoinformatico.com/s...droid-phone-android-con-pepephone-t16852.html
[SOLVED]
hi all, i flash latest paranoid android rom, andorid 4.3 , first thing i notices is the first boot, i stuck on boot logo, and i need to reboot, when phone start , i put sim card pin, and errror appear , com.android.phone stopped, i asking for advice in PA page on g+ , all people say reflash... wipe... i do all thing posible, so i tried to flash other rom, stock rom, and i have one more time the first boot problem, (stuck in boot logo) and then com.andorid.phone ERROR
please i need help what can i do??
orti13 said:
hi all, i flash latest paranoid android rom, andorid 4.3 , first thing i notices is the first boot, i stuck on boot logo, and i need to reboot, when phone start , i put sim card pin, and errror appear , com.android.phone stopped, i asking for advice in PA page on g+ , all people say reflash... wipe... i do all thing posible, so i tried to flash other rom, stock rom, and i have one more time the first boot problem, (stuck in boot logo) and then com.andorid.phone ERROR
please i need help what can i do??
Click to expand...
Click to collapse
Ok i had similar issue with stuck on boot logo. Here is fix. ITS SUPER SIMPLE
1. Go download newest SDK developer dot android dot com/sdk/index.html (New on forums so i can't post links)
2. Unzip sdk and naviagte to sdk/platform-tools
3. Use the fastboot and adb program in this folder to fastboot over your new rom.
For me I was rooted on 4.2.2 AOKP and everytime i flashed rom it would succeded but then fail to boot. Read somewhere on google that using old version of fastboot/adb can cause the issue. Updated and eveything worked flawlessly.
dhruvb14 said:
Ok i had similar issue with stuck on boot logo. Here is fix. ITS SUPER SIMPLE
1. Go download newest SDK developer dot android dot com/sdk/index.html (New on forums so i can't post links)
2. Unzip sdk and naviagte to sdk/platform-tools
3. Use the fastboot and adb program in this folder to fastboot over your new rom.
For me I was rooted on 4.2.2 AOKP and everytime i flashed rom it would succeded but then fail to boot. Read somewhere on google that using old version of fastboot/adb can cause the issue. Updated and eveything worked flawlessly.
Click to expand...
Click to collapse
Thanks i will try , bit my principal problema now is when i flash stock ROM i lost CMW recovery so now i have android 4.3 without root without recovery and with android.phone error ... And i dont know exatcly what to do????
I really need help
orti13 said:
Thanks i will try , bit my principal problema now is when i flash stock ROM i lost CMW recovery so now i have android 4.3 without root without recovery and with android.phone error ... And i dont know exatcly what to do????
I really need help
Click to expand...
Click to collapse
This is easy. Turn on phone with power and vol down buttom pressed. When on the bootloader screen plugin to computer and use fastboot to sideload custom recover.
(./fastboot sideload ziptosideload.zip)
Hi Everyone,
I have an issue with my Oneplus8 pro and below are the details
1. The device was working perfectly. I was interested to root the device and install a custom ROM.
2. The method used was to try and flash a patched boot image for the device but I think i landed up using a wrong boot image file.
3. The OS was on 10.5.10 if I remember correctly. I used a patched image file I suppose of an older firmware. Now restarts and goes to "QUALCOMM Crashdump mode". The only options are
a. reboot to fastboot mode
b. flash the TWRP for Oneplus 8 pro but that doesnt mount by storage so cant really transfer anything to flash again.
Requesting some help to fix the issue and apologies if i have not explained correctly.
Tried booting a stock boot image?
neverborn said:
Tried booting a stock boot image?
Click to expand...
Click to collapse
Hey,
Thank you for a quick repsonse. Yes, i had tried doing that and still the same error however while we speak, i just downloaded the msmDownloadtool and tried using it to flash a stock firmware and finally, i am so happy to see the device boot sucessfully
Thank you once again for tryin to help
Regards
Hello.
Clarify exactly how the procedure took place