I have CM10 by Tezet and are good rom for me but i have big problem with app that discovery dlna -upnp server in the net ,i try BubbleUPnP and MediaHouse and not discovery server in the net AND crash wifi (the icon go gray and no longer works),i I have to close app and switch off and on wifi for a new working wifi.On stock rom(GB) are ok.I try to clear cache ,dalvin cache and reinstall rom but don't works.
Sorry for my bad english.
Thanks in advance for help
flaviod said:
I have CM10 by Tezet and are good rom for me but i have big problem with app that discovery dlna -upnp server in the net ,i try BubbleUPnP and MediaHouse and not discovery server in the net AND crash wifi (the icon go gray and no longer works),i I have to close app and switch off and on wifi for a new working wifi.On stock rom(GB) are ok.I try to clear cache ,dalvin cache and reinstall rom but don't works.
Sorry for my bad english.
Thanks in advance for help
Click to expand...
Click to collapse
Please use the console, running the following command, I think this will help tezet.
1. su -
2. dmesg > /sdcard/dmesg.log
3. logcat -t time -d > /sdcard/logcat.log
Please parse the logcat.log and mesg.log in here. It can help rd to analyse what's wrong it is.
ok i have make this (see in attachement in zip file)
I do your command in terminal
install bubbleupnp
search dlna server (no discovery and wifi crash)
close app bubbleupnp
switch of wifi
switch on wifi (wifi now working)
close terminal
I have install ago app Wifi Fixer of Zanshin-g1 but don't help me
thanks for interesting
:good:
Guys,
I am having exactly the same problem. Installed CM10, tried BubbleUPnP, Media House... same effects. Did not find any device (which were found before with stock GB, and also by other devices yet) and crashes / freezes the Wi-Fi.
Does anyone have any solution?
Regards!
I'm having the same problem, but on a different device and a different rom: Droid 2 Global, running AOKP-Kanged v1.8 (4.0.4). was running CM7 GB but decided to change roms today because the Wi-Fi has always had issues dropping out after a random amount of time. I use the device mainly for streaming internet radio and as a DLNA client, so if wifi isn't stable, it's pretty annoying/useless to me.
Anyhow, updated to this new rom and was thrilled that I could stream internet radio for hours without the Wi-Fi cutting out. Awesome!!
Then I installed MediaHouse (upon/dlna client) which has worked really well for me on this and other devices, and spent the next several hours tearing my hair out because of wifi issues.
As OP has said, when the dlna app tries to discover the servers, it does something to the Wi-Fi where it looks like it's connected, but the connection is completely hosed. The app never picks up the server either.
So far I've tried MediaHouse and Skifta. Both have worked in the past, but neither work now; they both send wifi into a tail spin. I also have a tv, an Xbox 360, and a Galaxy S3 and they can all connect to the server fine, so I know it's the phone, and that it's only started being a problem after switching to this rom.
I'm very interested in following this issue. If there's anything I can do to debug this, I'm happy to do so and post findings.
-Rick
And I'm having the same problem = /
Has anyone got any solution? Has anyone talked to TEZET about this problem?
I had the same problem when I used the CM9of alecx804 and not had this problem using of CM10.1 Eagle_Mars (I just do not use more of Eagle_Mars because the bluetooth does not work for media ç.ç)
Only remains this to this ROM be perfect, it would be cool to send it to Motorola to show that the Milestone 2 can receive updates of the operating system and can be faster than the original with Motoblur.
Any news? Any solution fo DLNA?
Related
What is the best non-archos "firmware". I want to "fix" all the problems that the released updates can't seem to fix. At this point I am willing to do the SDE root (currently using archangel).
looking for:
WIFI N
Flixter Movies app functionality
media not being deleted from SD
adhoc tether
TIA
fuzzer said:
WIFI N
media not being deleted from SD
Click to expand...
Click to collapse
Aren't these fixed?
As there is only one additional FW you have to try UrukDroid.
But that atm is also suffering the mediadelete under some circimstances.
And wifi n is working with the last version.
I will see today if the WIFI issues I was having are truely fixed when I visit my usual lunch hot spot....(could not get on the internet with .3 & .4, but works fine on 2.0.71)
I never had a problem connecting to my home router(wndr3700 b/g/n), but noticed that it only connected at 54Mbps even after the update. I flashed my router firmware to the latest, but still only 54...
Still disappointed that after 2.0.71, the Flixster Movie app trailers will not play....
As for the media issue, I do believe it is fixed, i just included it in my requirements.....
2.1.08 Fixed my hotspot problem...only connects @ 54Mbps....
so I guess its a keeper until I get fed up with not have trailers in Movies app...
Still debating on SDE root
This is a common missunderstanding.
Archos says WLAN N compatible, which means it can talk the Protokoll.
It doesn't state that it will be full N Speed.
fuzzer said:
2.1.08 Fixed my hotspot problem...only connects @ 54Mbps....
Click to expand...
Click to collapse
I was wrong... after further testing, it stays connected, but no internet access...just like 2.1.4...
Only now I can't revert, so my "internet tablet will no get on the internet except at home where i don't need a tablet....
@fuzzer you CAN downgrade to 2.1.4
Thanks to the FAQ by antony.ps
antony.ps said:
8) Can't connect to my wireless network.
- Tap and hold the SSID of the network and select Forget
13) How can I make GPS work better (be more fast and precise)?
- Make a backup of your /etc/gps.conf (use a file manager to rename or copy to another place)
- Visit this thread
- Click in the link "XDA Members Click Here" at the final of the post, and search for the correct .zip for your country
- Copy the .zip to your SD Card and reboot in Bootmenu, then flash the zip via Custom Recovery
Click to expand...
Click to collapse
For me, Wifi and GPS don't seem to be giving problems. But again, thanks for bringing in the useful information.
not working in Brazil with Cm7 rom ported from defy
On my UK 2.2.2 android there is no /system/etc/gps.conf file. Maybe this GPS fix is only for HTC phones.
In MIUI, I have the file in
/system/etc/gps.conf
and
/etc/gps.conf
sahilarora911 said:
In MIUI, I have the file in
/system/etc/gps.conf
and
/etc/gps.conf
Click to expand...
Click to collapse
/etc is a symlink to /system/etc the files are the same.
Sent from my Milestone 2 XDA App
dangpzanco said:
/etc is a symlink to /system/etc the files are the same.
Sent from my Milestone 2 XDA App
Click to expand...
Click to collapse
I don't know much about unix based systems, so pardon my ignorance
But it's nice to learn..
sahilarora911 said:
I don't know much about unix based systems, so pardon my ignorance
But it's nice to learn..
Click to expand...
Click to collapse
=D Don't worry.
This port not working on my MS2...
I have an issue whit my wifi:
it stopped receiveing wifi signal, then I flashed the last version but it still not receiving any wifi signal.
I tried to delete my saved wifi and it doesn't work
a data wipe can help?
any suggestion?
I use cyanogenmod 7 rom
skaburn said:
I have an issue whit my wifi:
it stopped receiveing wifi signal, then I flashed the last version but it still not receiving any wifi signal.
I tried to delete my saved wifi and it doesn't work
a data wipe can help?
any suggestion?
I use cyanogenmod 7 rom
Click to expand...
Click to collapse
Are you using the latest version of the Rom?
Did you flash a Froyo and/or a GB SBF?
Sent from my Milestone 2 XDA App
Wifi problems with 802.11 N + PEAP Authentication
Hi folks!
Here in my university we have a Network called Eduroam (www.eduroam.org , probably you've already heard about it).
The Hotspots are N capable, so my phone, if connected, shows a speed of 65 Mbps. For the authentication, we use MSCHAP v2. So far, so good...
Now to the things I experienced: @ home, where I use a 802.11g network, everything seems to be ok.
Here in the university it's not. Sometimes it needs a really long time to connect to the network, and sometimes it drops the connection just shortly after. Switching off and on again speeds up the process a lot.
But now to the worst part: Often, the connection is shown as established ('Connected'), but in reality there is no connection: No mail connection, no HTTP connection, ping doesn't go through... nothing. Even it shows it is still connected.
Now I am not sure if this issue is caused by the autentication or the N Network , but I can say two things for sure:
1. My laptop, when connected to the same network with the same parameters works fine.
2. It has been working fine up to the transition from Android 2.3.5 to 2.3.7.
I'm running cm7-20111021-NIGHTLY-Milestone2-ICS-pre_stable-v1.5 on a A953, but was also experiencing those issues on builds before that one.
I'd have loved to post this into the developement thread, because I have already seen someone describing a simmilar issue (less detailed unfortunately), but I can't due to the 10 posts minimum rule.
Best regards and thanks for that great port, Endless !
jsschmid said:
Hi folks!
Here in my university we have a Network called Eduroam (www.eduroam.org , probably you've already heard about it).
The Hotspots are N capable, so my phone, if connected, shows a speed of 65 Mbps. For the authentication, we use MSCHAP v2. So far, so good...
Now to the things I experienced: @ home, where I use a 802.11g network, everything seems to be ok.
Here in the university it's not. Sometimes it needs a really long time to connect to the network, and sometimes it drops the connection just shortly after. Switching off and on again speeds up the process a lot.
But now to the worst part: Often, the connection is shown as established ('Connected'), but in reality there is no connection: No mail connection, no HTTP connection, ping doesn't go through... nothing. Even it shows it is still connected.
Now I am not sure if this issue is caused by the autentication or the N Network , but I can say two things for sure:
1. My laptop, when connected to the same network with the same parameters works fine.
2. It has been working fine up to the transition from Android 2.3.5 to 2.3.7.
I'm running cm7-20111021-NIGHTLY-Milestone2-ICS-pre_stable-v1.5 on a A953, but was also experiencing those issues on builds before that one.
I'd have loved to post this into the developement thread, because I have already seen someone describing a simmilar issue (less detailed unfortunately), but I can't due to the 10 posts minimum rule.
Best regards and thanks for that great port, Endless !
Click to expand...
Click to collapse
Probably you can try switching off the N network from your phone. Force it to connect through G.
This post might help you.
http://forum.xda-developers.com/showpost.php?p=9467118&postcount=4
It basically disables n network from Milestone 2
You can give it a shot.
I delete all my wifi connections, reboot the cell and work all good..
Enviado desde mi MotoA953 usando Tapatalk
Good for me
Neuralsystem said:
not working in Brazil with Cm7 rom ported from defy
Click to expand...
Click to collapse
Seemed to work for me. Im with CM7 too.
Download and installed South America.zip
Thanks a lot for the post
Hi everyone,
yesterday I was it my friend and tried to connect to his access point. He has b/g AP with WPA2 password protection & DHCP enabled. But when I tried to connect it kicked me off in authetication state and tried to connect again - but without success. I tried to disable and enable wifi, deleting saved connection, but nothing of this helped me.
I'm using CM7 - does anyone have similiar or same problem - connecting to WPA2-PSK wifi? I'm using WPA at home and it works ok - I just want know if it is global problem with CM7 on Milestone 2 or just me (or just this AP) and what solutions can i try.
Thanks for suggestions.
I know it is not here but my phone is locked in airplane mode!
Anonymous_ said:
Hi everyone,
yesterday I was it my friend and tried to connect to his access point. He has b/g AP with WPA2 password protection & DHCP enabled. But when I tried to connect it kicked me off in authetication state and tried to connect again - but without success. I tried to disable and enable wifi, deleting saved connection, but nothing of this helped me.
I'm using CM7 - does anyone have similiar or same problem - connecting to WPA2-PSK wifi? I'm using WPA at home and it works ok - I just want know if it is global problem with CM7 on Milestone 2 or just me (or just this AP) and what solutions can i try.
Thanks for suggestions.
Click to expand...
Click to collapse
It always happens to me on my uncle's house. His wifi is WPA2 and has such a BIG password, but when I try to connect the phone acts as if nothing happened...
I think it's a global problem with Milestone 2, because it didn't work in any Rom, Froyo/CM7/GB/MIUI.
Sent from my Milestone 2 XDA App
MasterTB said:
I know it is not here but my phone is locked in airplane mode!
Click to expand...
Click to collapse
Reboot, disable airplane mode, than reboot again.
Sent from my Milestone 2 XDA App
in my MS2, wifi will connect and disconnect again and again, even if forgeting my wireless node
Pardon me if this is a repeat, but I've searched and found nothing.
I'm on Moto Defy/MB525, rooted, overclocked, CM7.
My issue is this....Wifi on my home network connects just fine, surfs just fine, until I connect andFtp to my Mac. Initially, everything is good...connects fine, ls- fine, allows selection of file on host and destination on client. The problem comes in between 2% & 5% transfer; wifi stalls, socket disconnects(Server kick out?), wifi becomes inactive for anything/everything. I can cycle the wifi and it 's functionality returns. Then I'm back at the start. Thought it was andFtp, but it works fine with my website, as does my Mac.
So I guess my question is....why would/should/could FTP cause the wifi to fail?
Thanks in advance
supernugget said:
Pardon me if this is a repeat, but I've searched and found nothing.
I'm on Moto Defy/MB525, rooted, overclocked, CM7.
My issue is this....Wifi on my home network connects just fine, surfs just fine, until I connect andFtp to my Mac. Initially, everything is good...connects fine, ls- fine, allows selection of file on host and destination on client. The problem comes in between 2% & 5% transfer; wifi stalls, socket disconnects(Server kick out?), wifi becomes inactive for anything/everything. I can cycle the wifi and it 's functionality returns. Then I'm back at the start. Thought it was andFtp, but it works fine with my website, as does my Mac.
So I guess my question is....why would/should/could FTP cause the wifi to fail?
Thanks in advance
Click to expand...
Click to collapse
Not exactly the same as your issue but I see you use CM7 and thats the one ROM that I have had wifi issues with, do the problems occur when the screen goes to sleep ?The issue I have is that regardless of wifi sleep policy when the screen goes to sleep,although I am "connected" streaming radio starts to stutter,or transfer rates will crash,I know its not the same issue as the one you have but here is a link to bug report for CM 7
http://code.google.com/p/cyanogenmod/issues/detail?id=4232
The motorola milestone was/is plagued by similar issues when using WPA2 with certain access points. I think it was related to buggy TI wifi drivers.
For milestone, this was recently fixed in kabaldans CM7 port.
Maybe the defy is using the same buggy drivers?
Sent from my Milestone using XDA App
Thank you both for the answers.
Bombardier, sleep seems irrelevant, it does stutter and I am on wpa2, figure I'll try something different now, eh?
Nanzy, ill try the other rom you mentioned.
Thanks again.
Sent from my MB525 using XDA App
This turns out to be the solution. Switching to WPA solved the entire issue. Thanks again for the insight.
Has anoyone else trouble with wifi and cm10? I can't download more than a few mb. then the connection stalls, and I have to manually disconnect and reconnect to get it working again. I'm using a m252 with green lense as phone and a fritzbox 7390 as wifi router.
I forgot: Wifi in CM9 worked without problems...
desperadoduck said:
I forgot: Wifi in CM9 worked without problems...
Click to expand...
Click to collapse
I have the same problem, but also on stock defy, CM7 but under CM10 it occures more often. (Defy green lens)
I had trouble with a virgin media hub, but a sky one works fine. If the hub has a connect button try connecting that way instead of via entering key and it might work, did for me
Sent from the real world by hacking into the matrix
hey,
yeah I had exactly the same problem as the OP described. Initially I couldn't get the wifi to connect at all, got stuck on 'obtaining IP address'. I had to cancel my wifi wpa2 security and put it back on later to resolve that issue.
(If it helps anyone - I tried out cm10 for a few days, but ran into wifi problems, rockplayer didn't work (that is supposed to be resolved by now), and couldn't get the samba share to work. So I'm switching back to cm7.2 for a little longer. cm10 looks great and it never crashed on me so I'm very impressed, and actually donated AGAIN to the developers
Just for the record, here are the results of some experiments I did:
* full wipe: didn't help
* connect via wps: didn't help
* disabled wp on routers: didn't help
* switched from wpa2 to wpa: didn't help
* disabled disconnect on bad connection: didn't help
* switched back to cm9: everything works fine
so I guess I'm stuck for now... :-/
desperadoduck said:
Just for the record, here are the results of some experiments I did:
* full wipe: didn't help
* connect via wps: didn't help
* disabled wp on routers: didn't help
* switched from wpa2 to wpa: didn't help
* disabled disconnect on bad connection: didn't help
* switched back to cm9: everything works fine
so I guess I'm stuck for now... :-/
Click to expand...
Click to collapse
08/08 quarx build everything seems fine, could try it
@non4 said:
08/08 quarx build everything seems fine, could try it
Click to expand...
Click to collapse
I get the message 'Authentication problem' on my Defy running 08/08 quarx installed this morning.
I've tried restarting the Thomson router but nothing changes. Wifi worked fine on C7.1 but I must admit I didn't check it on the C10 04/08 build.
My 3G connection is pretty good so I have no plans to uninstall and will double check at the weekend, where I can get access to a BT Homehub.
brunc said:
I get the message 'Authentication problem' on my Defy running 08/08 quarx installed this morning.
I've tried restarting the Thomson router but nothing changes. Wifi worked fine on C7.1 but I must admit I didn't check it on the C10 04/08 build.
My 3G connection is pretty good so I have no plans to uninstall and will double check at the weekend, where I can get access to a BT Homehub.
Click to expand...
Click to collapse
Never even heard of a Thompson one. All I've tried (and all working) are BT, Sky and Virgin.
@non4 said:
08/08 quarx build everything seems fine, could try it
Click to expand...
Click to collapse
I'm using it ( CM10 08/08 quarx) too, but I have the same wifi problems (shows the phone connected to the wifi but the internet is stopped).
As far as I can see, they (stock, CM, MIUI, WIUI) work differently on each phone.
Regards,
wurealm said:
I'm using it ( CM10 08/08 quarx) too, but I have the same wifi problems (shows the phone connected to the wifi but the internet is stopped).
As far as I can see, they (stock, CM, MIUI, WIUI) work differently on each phone.
Regards,
Click to expand...
Click to collapse
Interesting.
For the record my router is the Thomson TG585 v8 - it gets pretty mixed reviews and can clearly be bettered so perhaps I should upgrade it. I'll report on Saturday how I get on with the BT Homehub.
Also for the record the 08/08 build runs more smoothly than the 04/08 build - very nice!
I encountered some problems (disconnecting from time to time while device is not moved) but the scan connect speed increased compared to CM9. Also switching WiFi on/off is much more faster now. Very convinient when choosing between different WLANs.
me too...
This is so troubble
RPHJR said:
This is so troubble
Click to expand...
Click to collapse
I see the 08/08 build has been replaced entirely by 10/08... let's see what that brings!
Wifi using BT homehub seemed to work OK - installed 10/08 and is fine too... good upgrade!
Sent from my MB525 using xda app-developers app
wifi resolved
I was same problem with wifi data connectivity. After some MB dropped the the connection. (tplink wifi router). Switched the wifi speed from 300 mbps to 54 mbps. After this the wifi worked normaly, no dropped data connection, and download speed is over 10 mbps, and the upload speed is over too 10 mbps.
Defy MB525 red lens GB kernel 12.08-nightly
Sorry my bad english
Same problem here on CM10-20120812-NIGHTLY-mb525.zip with MB525 green lense. After a while wifi has no more internet connection, but device connection is shown properly on phone and AP. Switching wifi OFF/ON on phone helps.
Temporary fix, I have trouble with virgin media routers. Connect via wps button on the hub, it works, takes a while to connect but at least it works, I get authentication error when using password
macrobbi said:
Same problem here on CM10-20120812-NIGHTLY-mb525.zip with MB525 green lense. After a while wifi has no more internet connection, but device connection is shown properly on phone and AP. Switching wifi OFF/ON on phone helps.
Click to expand...
Click to collapse
The Wi-Fi ON/OFF switching helps too and is easier/quicker than the phone switching
wurealm said:
The Wi-Fi ON/OFF switching helps too and is easier/quicker than the phone switching
Click to expand...
Click to collapse
Temporary solution
Before connecting to wifi try disable mobile connections, then turn it on after
I have a NSX-46GT1 & have had no issues with it at all. About a week or so ago I started having connection problems with the Netflix app. Now, I've done the usual cleaning cash/killed process/even reset the whole TV. My other apps like YouTube & Chrome work fine. Now here's the interesting part; if I change router ports or switch to WiFi it will connect fine. It will only have issues as long as I don't close the app out or keep it idle for too long.
I have exhausted all possibilities from the router by opening it up as much as I can (disable firewall etc.) Even tried changing the DNS ip's bit still come across the same issue. The TV is not rooted & I cannot find a working Netflix apk atm, any ideas guys?
If this thread is posted in the wrong place I apologize & please point me in the right direction.