sorry for my noob question about partition size and if someone had said about this, please tell me again because I 've already found but I couldn't see
for example, I see that "Partitions Required:
Boot - 5 MB
Recovery - 5 MB
System - 100 MB
Cache - 2 MB
Misc - 1 MB"
I know that setting system and cache partition size in HD2 toolkit, what about the others?
tin1203 said:
sorry for my noob question about partition size and if someone had said about this, please tell me again because I 've already found but I couldn't see
for example, I see that "Partitions Required:
Boot - 5 MB
Recovery - 5 MB
System - 100 MB
Cache - 2 MB
Misc - 1 MB"
I know that setting system and cache partition size in HD2 toolkit, what about the others?
Click to expand...
Click to collapse
The others will be fine as they are. You don't need to worry about them, and normally you don't really need to worry about the cache either. Just change the /system partition each time you flash (if needed) and everything should work.
Nigeldg said:
The others will be fine as they are. You don't need to worry about them, and normally you don't really need to worry about the cache either. Just change the /system partition each time you flash (if needed) and everything should work.
Click to expand...
Click to collapse
+1 :laugh:
but I still want to know the answer
tin1203 said:
+1 :laugh:
but I still want to know the answer
Click to expand...
Click to collapse
They are what their names suggest.
misc = miscellaneous << check the reference for more info.
data = your data
boot = your boot img
recovery = where your recovery resides.
Read more here.
tin1203 said:
+1 :laugh:
but I still want to know the answer
Click to expand...
Click to collapse
Oh sorry haha the translation to English wasn't too good, I thought you only wanted to know how to set them Well, I guess Marvlesz has answered your question anyway
Nigeldg said:
Oh sorry haha the translation to English wasn't too good, I thought you only wanted to know how to set them Well, I guess Marvlesz has answered your question anyway
Click to expand...
Click to collapse
It's not your fault. If I had come to this thread before you, I would have answered the same answer as yours.
ok, the information you gave me 're very helpful :good:
but I really want to know may I change them and how to
oh no, may the title of my thread made you misunderstand me, that 's my fail, sr
I know in cLK you can change them by going to Settings.
I don't use MAGLDR, so I don't know.
Why do you want to change them?
to change them, use the standalone magldr installer instead of teh toolkit, which has a file called flash.cfg which you edit in notepad and contains all the partition sizes like you listed.
Related
Ive seen many questions in the Q & A forum about this CWM and figured the best way is to get developers and other main contributors to look at the issues some of the "little people" have about using it. DAF was convenient and easy for all because it was one click for the people who could get that far, and since CWM, there where the 3 versions and this one has yet to really be well touched upon as a full tutorial with the copy to SD not being needed any more. I feel as do many others that a main "sticky" thread be made for it with a few FAQ on this section of the forum so they do not have to search too far away from the main thread they are using and get completely confused.
1. Will doing a backup and changing ROMs using CWM with different partition delete my backup?
2. Will doing a backup KEEP my partition?
3. Is it possible to do a partition from CWM or is the partition need to be carried on a computer?
(this to me seemed to defeat the purpose of CWM with some DEVs making their own partition layouts and not using the main ones that were originally laid out for use, no aim towards DEVs because I know they work hard)
4. If I put multiple ROMs on my SD card do I need to change the partition every time if I want to change them?
5. Is there a way to know which backups are from which ROMs I had used?
(I guess this is asking if they can change the name?)
6. How do I know when to "Wipe Cache Partition"?
I know there is *THIS* thread, however there are surely some differences between the copy of those files and not needing to copy amongst other things to which the "new" people do not understand.
If this is just a bother and hindrance to you all, I understand the deletion of this thread, however it did take quite a while to plan out what to write, and what not to should you choose to do so and I would give the answers, however even I do not know all of them and so I leave this to you all for debate. NO PUBLIC BASHING PLEASE
Dude, this forum is for posting dev projects. Why on earth do you think its ok to post a questions topic in here when we have a dedicated questions forum?!?!
TheATHEiST said:
Dude, this forum is for posting dev projects. Why on earth do you think its ok to post a questions topic in here when we have a dedicated questions forum?!?!
Click to expand...
Click to collapse
I said it could be moved or deleted just the questions are not very well maintained in that DEDICATED (? HA) forum there are multiple posts of the same and I felt that since there is a sticky thread here that could answer the forum issue of the DEVELOPED CWM program this should be brought to the attention and as such is a DEV related issue. It can and most likely will be moved, do you have an answer to any of the issues the people asked?
TheATHEiST said:
Dude, this forum is for posting dev projects. Why on earth do you think its ok to post a questions topic in here when we have a dedicated questions forum?!?!
Click to expand...
Click to collapse
now that it's been moved, nobody will discuss the answers and it's a pointless post.
harrystone33 said:
1. Will doing a backup and changing ROMs using CWM with different partition delete my backup?
Click to expand...
Click to collapse
No this will not delete your back up as it is saved on yor SD card when you do the back up.
harrystone33 said:
2. Will doing a backup KEEP my partition?
Click to expand...
Click to collapse
This I am not really sure of as I am not a dev but I think it does as the backup is just a backup of your settings, personal information, your gmail account associated with your Android, boot data, and any cache data that you have built up.
harrystone33 said:
3. Is it possible to do a partition from CWM or is the partition need to be carried on a computer?
(this to me seemed to defeat the purpose of CWM with some DEVs making their own partition layouts and not using the main ones that were originally laid out for use, no aim towards DEVs because I know they work hard)
Click to expand...
Click to collapse
You can partition your SD card with CWM but I do not think you can do a system portion as CWM is what creats the system portion when you flash it. It creates a partition in the CWM.
harrystone33 said:
4. If I put multiple ROMs on my SD card do I need to change the partition every time if I want to change them?
Click to expand...
Click to collapse
Once again I am not a dev (yet) and I am not 100% sure of this. But I would say if the ROMs you have stored on SD card need different portition sizes then yes you will need to change the partition size when you change ROMs. If they require the same partition size then no you do not need to change the partition size.
harrystone33 said:
5. Is there a way to know which backups are from which ROMs I had used?
(I guess this is asking if they can change the name?)
Click to expand...
Click to collapse
You should be able to manually go into your SD card with a computer and change the name on the backup file, but I do not know if this will interfer with CWM being able to detect the backup file. So you might want to write down the original full name of the file befor you change it.
harrystone33 said:
6. How do I know when to "Wipe Cache Partition"?
Click to expand...
Click to collapse
As a rule of thumb I would not delete my cache unless I was about to flash a new ROM.
Also check out my guide I wrote in linked in my sig, you might find it useful.
Hope this helps you out some.
Ever looked through the entire forum and not found the answer. Or is there or, indeed, wavered.
It is possible to change the partition layout without using DTF?
Sorry for mi English. I'm using Google Translate
fabioconverge said:
Ever looked through the entire forum and not found the answer. Or is there or, indeed, wavered.
It is possible to change the partition layout without using DFT?
Sorry for mi English. I'm using Google Translate
Click to expand...
Click to collapse
not sure with your question
Do you mean partition layout for Nand Android?
As I know, the only way to create partition lay out to fit the ROM requirement is using CWM.
DFT = Dark Forces Team. What do you mean with DFT? did you refer to MAGLDR?
Please give more info
fabioconverge said:
Ever looked through the entire forum and not found the answer. Or is there or, indeed, wavered.
It is possible to change the partition layout without using DFT?
Sorry for mi English. I'm using Google Translate
Click to expand...
Click to collapse
I believe you meant to type DAF instead of DFT, don't sweet it we all make mistakes.
If I am wrong someone please correct me, but I think you change it the same as you do in clocke work mode.
Extract the files from the. zip file and look for the flash.cfg file. Then open Wordpad and drag the file to the word pad and look for the below line of text.
misro 5M ---à system ya ???M cache ya 4M userdata ya
There should be numbers wher ai have the three ? just change that number to the size you want and save the file.
Hello!
Wrong! Excuse me!
Went through Google translator and the name was changed.
Thank you for the quick return they gave me.
T-Macgnolia:
I found the file you said, but the problem is that the micro USB is broken. Then its question would be:
How do I install a new layout without a PC or change the layout already installed?
silverwind:
It really was DFT. I was wrong.
Insee more information above. If it is not necessary to let me know, please, that I'll post more details.
Thanks again!
fabioconverge said:
Hello!
Wrong! Excuse me!
Went through Google translator and the name was changed.
Thank you for the quick return they gave me.
T-Macgnolia:
I found the file you said, but the problem is that the micro USB is broken. Then its question would be:
How do I install a new layout without a PC or change the layout already installed?
silverwind:
It really was DFT. I was wrong.
Insee more information above. If it is not necessary to let me know, please, that I'll post more details.
Thanks again!
Click to expand...
Click to collapse
No, you cannot change partitions if you have no USB. Sorry.
samsamuel said:
No, you cannot change partitions if you have no USB. Sorry.
Click to expand...
Click to collapse
Uui!
Thank´s
samsamuel said:
No, you cannot change partitions if you have no USB. Sorry.
Click to expand...
Click to collapse
I was thinking ...
Inside there would be no possibility of Android?
Correct me if I eraado, but once loaded the OS running in memory and ta would be possible to make changes in the partition. Right?
Perhaps if you boot with Ubuntu and Linux using a tool ...
I can not believe that my trading on my HD2 ROM came to an end ...
Thanks again
It has been asked several times, and no one has given a yes answer.
I'm sure it CAN be done, but you are probably going to have to do it yourself. There are no instructions, no methods, and no one has ever said "yes it can be done".
If you find a way, there will be many people who would praise you like a God!
samsamuel said:
It has been asked several times, and no one has given a yes answer.
I'm sure it CAN be done, but you are probably going to have to do it yourself. There are no instructions, no methods, and no one has ever said "yes it can be done".
If you find a way, there will be many people who would praise you like a God!
Click to expand...
Click to collapse
I wonder if it could be done by using Terminal Emulator while running android. I would think if it is possible that right now you would only be abale to use Terminal Emulator to do it unless there is a little known app that has been developed.
the problem is :
1- the wifi not working in this VERSION 21.1 +VERSION21.0 but it working in Older Version like 19
2- the Arabic RTL fix for V21.x not working also in this VERSION 21.1 +VERSION21.0 but it working in Older Version like 19
if version 19 works for you just keep it and update the gps libs yourself. there are no other significant changes in this versions.
and if you have a problem with a rom why don't you post it in the roms thread. no need for an extra thread in this section.
rauschkugl said:
and if you have a problem with a rom why don't you post it in the roms thread. no need for an extra thread in this section.
Click to expand...
Click to collapse
i cant post in roms thread
mazen.mezoo said:
i cant post in roms thread
Click to expand...
Click to collapse
why not? and my wifi works flawless on 21.1
LaneyEFC said:
why not? and my wifi works flawless on 21.1
Click to expand...
Click to collapse
when i want to post i show thes massege
vBulletin Message
mazen.mezoo, you do not have permission to access this page. This could be due to one of several reasons:
Please Read: New members (those with fewer than 10 posts) are not permitted to post to development-related forums. The developer forums are intended for experienced users and developers to discuss ways to improve technical aspects related to ROMs and Software. While you may be an expert, we ask ALL users to avoid posting questions about using or installing ROMs and software in the Development Forums. To encourage this new Users can read but not post in these forums.
To ask Questions about developing your device, installing ROMs, software and themes you must go to the Q&A or General Forum.
Remember, your question has very likely been asked already, so please search before posting.
Your user account may not have sufficient privileges to access this page. Are you trying to edit someone else's post, access administrative features or some other privileged system?
If you are trying to post, the administrator may have disabled your account, or it may be awaiting activation.
rauschkugl said:
if version 19 works for you just keep it and update the gps libs yourself. there are no other significant changes in this versions.
and if you have a problem with a rom why don't you post it in the roms thread. no need for an extra thread in this section.
Click to expand...
Click to collapse
when i want to post i show thes massege
vBulletin Message
mazen.mezoo, you do not have permission to access this page. This could be due to one of several reasons:
Please Read: New members (those with fewer than 10 posts) are not permitted to post to development-related forums. The developer forums are intended for experienced users and developers to discuss ways to improve technical aspects related to ROMs and Software. While you may be an expert, we ask ALL users to avoid posting questions about using or installing ROMs and software in the Development Forums. To encourage this new Users can read but not post in these forums.
To ask Questions about developing your device, installing ROMs, software and themes you must go to the Q&A or General Forum.
Remember, your question has very likely been asked already, so please search before posting.
Your user account may not have sufficient privileges to access this page. Are you trying to edit someone else's post, access administrative features or some other privileged system?
If you are trying to post, the administrator may have disabled your account, or it may be awaiting activation.
The first question
Is the information the following are true as I heard them
boot yboot | ro 5M amount of memory reserved for take-off Cash
system ya 200M memory size reserved for the operating system
cache ya 5M amount of memory reserved for the Cash
The second question
When you download the ROM gives you cook these volumes
boot yboot | ro 6M
system ya 200M
cache ya 8M
We modify a file within Recovery_150M \ within a file when you download this flash.cfg Rome MAGLDR
But when you download the clk Rome where you can modify a Recovery does not contain this file flash.cfg
When using the HD2 Toolkit
Bhjman you can control only the size of the system and the size of cache, but the size of Ayman al-bots can be modified
I also find the cache size is limited to either 44 MB or 5 MB and the size of cache that I want is 8
Oosv so lengthy, but I did not find anyone Astia Mssaadta
Thank you very much and Dzak God is all goodness and increase you knowledge of the
And you peace and God's mercy and blessings
any one help me
When you download the ROM gives you cook these volumes
boot yboot | ro 6M
system ya 200M
cache ya 8M
We modify a file within Recovery_150M \ within a file when you download this flash.cfg Rome MAGLDR
But when you download the clk Rome where you can modify a Recovery does not contain this file flash.cfg
When using the HD2 Toolkit
2 size you can control only the size of the system and the size of cache, but the size of boots where we can modified
I also find the cache size is limited to either 44 MB or 5 MB and the size of cache that I want is 8
help me if you know ??
????
When you download the ROM gives you cook these volumes
boot yboot | ro 6M
system ya 200M
cache ya 8M
We modify a file within Recovery_150M \ within a file when you download this flash.cfg Rome MAGLDR
But when you download the clk Rome where you can modify a Recovery does not contain this file flash.cfg
When using the HD2 Toolkit
2 size you can control only the size of the system and the size of cache, but the size of boots where we can modified
I also find the cache size is limited to either 44 MB or 5 MB and the size of cache that I want is 8
???????
help me if you know ??
HD2 Toolkit just can control in 2 size
When using the HD2 Toolkit
2 size you can control only the size of the system and the size of cache, but the size of boots where we can modified
I also find the cache size is limited to either 44 MB or 5 MB and the size of cache that I want is 8
WTF ...no own can help me !!!
Hi,
I am running a SD rom and want to install a Nand.
How would I do this?
the normal way, , , 2.08.hspl,any radio 2.07.50 or higher (with a .50. in it, higher than 2,07), magldr, cwm of the correct size,then the rom. the fact you have android on sd is completely besides the point.
samsamuel said:
the normal way, , , 2.08.hspl,any radio 2.07.50 or higher (with a .50. in it, higher than 2,07), magldr, cwm of the correct size,then the rom. the fact you have android on sd is completely besides the point.
Click to expand...
Click to collapse
I have SD as I was advised by "a XDA expert" so make of that what you will.
sorry, that means nothing unless you clarify why having sd would be an issue, ,, do you mean you have an sd rom you want to dual boot alongside a nand? do you mean you want to move the sd rom onto nand? or just simply flash a new rom onto nand and forget about the sd one??
more detail of what you want to do is needed, please.
samsamuel said:
sorry, that means nothing unless you clarify why having sd would be an issue, ,, do you mean you have an sd rom you want to dual boot alongside a nand? do you mean you want to move the sd rom onto nand? or just simply flash a new rom onto nand and forget about the sd one??
more detail of what you want to do is needed, please.
Click to expand...
Click to collapse
I should of been more clear.
I am booting from a SD card and now I want to move onto NAND. And I want to flash a new rom and forget about the old one.
I have looked everywhere for videos to move from SD onto NANd but couldn't find any.
The rom is:
http://forum.xda-developers.com/showthread.php?t=1264828
Does it matter what size the SD card is?
xda_apprentice said:
I should of been more clear.
I am booting from a SD card and now I want to move onto NAND. And I want to flash a new rom and forget about the old one.
I have looked everywhere for videos to move from SD onto NANd but couldn't find any.
The rom is:
http://forum.xda-developers.com/showthread.php?t=1264828
Does it matter what size the SD card is?
Click to expand...
Click to collapse
Then that is easy, all you need to do is what was previously posted. I would start by visiting this thread: http://forum.xda-developers.com/showthread.php?t=1090783&highlight=toolkit
Download that program as it will do everything that you need to do to get prepared for a Nand rom. There is a video there of how to use it.
You basically Task 29, then you install MAGLDR 1.13. Once that is done you will install Clockwork recovery (you will need to check that Rom thread you want for the appropriate recovery size).
Once you have your recovery set up you just place your chosen Rom onto the card and flash it from recovery.
And no it doesn't matter what size your card is unless you plan on doing apps2sd.
chrisrj28 said:
Then that is easy, all you need to do is what was previously posted. I would start by visiting this thread: http://forum.xda-developers.com/showthread.php?t=1090783&highlight=toolkit
Download that program as it will do everything that you need to do to get prepared for a Nand rom. There is a video there of how to use it.
You basically Task 29, then you install MAGLDR 1.13. Once that is done you will install Clockwork recovery (you will need to check that Rom thread you want for the appropriate recovery size).
Once you have your recovery set up you just place your chosen Rom onto the card and flash it from recovery.
And no it doesn't matter what size your card is unless you plan on doing apps2sd.
Click to expand...
Click to collapse
I can't check the rom thread. If you clicked on the link I potsed it doesn't tell you anything about installing.
I need to know how install this on my phone and not SD.
Have you thoroughly read his post? he has said everything you need to do, and I will mark them out for you !
chrisrj28 said:
Then that is easy, all you need to do is what was previously posted. I would start by visiting this thread: http://forum.xda-developers.com/showthread.php?t=1090783&highlight=toolkit
Download that program as it will do everything that you need to do to get prepared for a Nand rom. There is a video there of how to use it.
You basically1- Task 29, then you 2- install MAGLDR 1.13. Once that is done you will 3- install Clockwork recovery (you will need to check that Rom thread you want for the appropriate recovery size).
Once you have your recovery set up you just4- place your chosen Rom onto the card and flash it from recovery.
And no it doesn't matter what size your card is unless you plan on doing apps2sd.
Click to expand...
Click to collapse
xda_apprentice said:
I can't check the rom thread. If you clicked on the link I potsed it doesn't tell you anything about installing.
I need to know how install this on my phone and not SD.
Click to expand...
Click to collapse
Furthermore, The link you posted assumes you know how to install it. It is only giving you out the partition size :
Download:
V1.1 Magldr:
EU version: MIRROR 1 - MIRROR 2 (5/150/5 + EXT2/3/4)
Tmous version: MIRROR 1 - MIRROR 2 (5/445/5)
Click to expand...
Click to collapse
(Cache/System/boot) ---- (you can ignore "boot", you probably won't need it)
Choose the size depending on your device.
Marvlesz said:
Have you thoroughly read his post? he has said everything you need to do, and I will mark them out for you !
Furthermore, The link you posted assumes you know how to install it. It is only giving you out the partition size :
(Cache/System/boot) ---- (you can ignore "boot", you probably won't need it)
Choose the size depending on your device.
Click to expand...
Click to collapse
Thank you for clarifying that for him, gosh try to help a guy out
best radio is 2.15.50.14.........NEVER 2.15.51......................nothing with 51 in
there are a lot of threads giving info about this
Marvlesz said:
Have you thoroughly read his post? he has said everything you need to do, and I will mark them out for you !
Furthermore, The link you posted assumes you know how to install it. It is only giving you out the partition size :
(Cache/System/boot) ---- (you can ignore "boot", you probably won't need it)
Choose the size depending on your device.
Click to expand...
Click to collapse
Listen Mr 191 Thanks, I can tell how long you been here ! Not everyone is on the same level! I am sure you were as bad, or even worse than people who just STARTED knowing about flashinh!
It maybe easy for you! But have a thought for SOME who HAVE NO IDEA !!
---------- Post added at 11:39 PM ---------- Previous post was at 11:36 PM ----------
Marvlesz said:
Have you thoroughly read his post? he has said everything you need to do, and I will mark them out for you !
Furthermore, The link you posted assumes you know how to install it. It is only giving you out the partition size :
(Cache/System/boot) ---- (you can ignore "boot", you probably won't need it)
Choose the size depending on your device.
Click to expand...
Click to collapse
I HAVE NO IDEA WHAT PARTION SIZE I HAVE TO DO! It would HELP if the developer TOLD us what size we need!
SOMEONE TELL ME WHAT SIZE DO I NEED TO PARTITION?
Marvlesz said:
Have you thoroughly read his post? he has said everything you need to do, and I will mark them out for you !
Furthermore, The link you posted assumes you know how to install it. It is only giving you out the partition size :
(Cache/System/boot) ---- (you can ignore "boot", you probably won't need it)
Choose the size depending on your device.
Click to expand...
Click to collapse
xda_apprentice said:
Listen Mr 191 Thanks, I can tell how long you been here ! Not everyone is on the same level! I am sure you were as bad, or even worse than people who just STARTED knowing about flashinh!
It maybe easy for you! But have a thought for SOME who HAVE NO IDEA !!
---------- Post added at 11:39 PM ---------- Previous post was at 11:36 PM ----------
I HAVE NO IDEA WHAT PARTION SIZE I HAVE TO DO! It would HELP if the developer TOLD us what size we need!
SOMEONE TELL ME WHAT SIZE DO I NEED TO PARTITION?
Click to expand...
Click to collapse
Ok I don't normally flame people but you are asking for it my friend. We are simply attempting to help you, I listed the steps required in my post and then Marvlesz highlighted the important items and even posted the following:
Download:
V1.1 Magldr:
EU version: MIRROR 1 - MIRROR 2 (5/150/5 + EXT2/3/4)
Tmous version: MIRROR 1 - MIRROR 2 (5/445/5)
Click to expand...
Click to collapse
He even gave you an explanation of what each value is, but you thank him by clearly not reading the info we provided and then attempting to flame him.
Every rom thread has the necessary partition listed somewhere in the first few posts. If you can't find it searching the thread will usually do it too as there is always someone asking what partition size to use.
Now we were all noobs at one point and we all have to learn the same lesson, use the search tools and ask questions last. If you do ask, pay attention to the info provided as there are a lot of knowledgeable users here who are willing to help. But by you posting like that it will almost guarantee that you get flamed the next time you asked something.
Be respectful and you will get all the help you need, continue to post like this and you will find yourself shunned.
chrisrj28 said:
Ok I don't normally flame people but you are asking for it my friend. We are simply attempting to help you, I listed the steps required in my post and then Marvlesz highlighted the important items and even posted the following:
He even gave you an explanation of what each value is, but you thank him by clearly not reading the info we provided and then attempting to flame him.
Every rom thread has the necessary partition listed somewhere in the first few posts. If you can't find it searching the thread will usually do it too as there is always someone asking what partition size to use.
Now we were all noobs at one point and we all have to learn the same lesson, use the search tools and ask questions last. If you do ask, pay attention to the info provided as there are a lot of knowledgeable users here who are willing to help. But by you posting like that it will almost guarantee that you get flamed the next time you asked something.
Be respectful and you will get all the help you need, continue to post like this and you will find yourself shunned.
Click to expand...
Click to collapse
Hang on, who says I "flamed him" I was asking about something I have no idea about. I am one of those people that goes through every flash knowing what I am doing and knowing the full facts.
I paid full attention to what advice was given and appreciate the time and effort given to me. I have no idea what size I have to partition, that's all I asked.
I do not appreciate people thinking just because they have flashed more than others, they are superior in any way.
That guy posted his comment in a way to suggest people who know less than him are stupid.
I am on here to seek advice and knowledge so that I can pass this to many others who are are on here.
According to the ROM you want, the partition size is 445 and the cache size is 5 if you have a TMOUS phone. If its the European model the you need a 150 with a cache size of 5 and you need to partition your sd card with 3 partitions. The easiest way to partition your phone is to use the HD2 tool kit. And if you need to partition your card, then use a program like EASEUS Partition Master. Hope that helps.
Sent from my Desire HD using XDA App
xda_apprentice said:
Hang on, who says I "flamed him" I was asking about something I have no idea about. I am one of those people that goes through every flash knowing what I am doing and knowing the full facts.
I paid full attention to what advice was given and appreciate the time and effort given to me. I have no idea what size I have to partition, that's all I asked.
I do not appreciate people thinking just because they have flashed more than others, they are superior in any way.
That guy posted his comment in a way to suggest people who know less than him are stupid.
I am on here to seek advice and knowledge so that I can pass this to many others who are are on here.
Click to expand...
Click to collapse
1- You did not flame me, you were just disrespectful.
2- You DID NOT PAY FULL ATTENTION TO WHAT ADVICE WAS GIVEN and it seems that you DID NOT APPRECIATE THE TIME AND EFFORT GIVEN TO YOU. (Sorry had to capitalize).
3- I DO NOT THINK I'M BETTER THAN YOU IN ANYWAY NEITHER DID I POST IT IN A WAY TO SUGGEST PEOPLE WHO KNOW LESS THAN ME ARE STUPID, I was only astonished of how you ignored chrisrj28's advice and re-asked your question. You also ignored/still ignoring my post which had the PARTITION SIZE MENTIONED ON IT (which supports my theory that you don't pay full attention or read thoroughly the information given to you).
4-If you really came here to seek advice and knowledge you wouldn't have made disrespectful comments about those who are providing advice neither would you TOTALLY IGNORE the information given to you and simply re-ask your question . Even if you were able to get the information, your way in which you'll pass it to many others would be the same way.
You call yourself xda-apprentice?
You know what, its not your fault. It is mine, that I entered this thread in the first place and considered help.
Peace,
M.
Marvlesz said:
1- You did not flame me, you were just disrespectful.
2- You DID NOT PAY FULL ATTENTION TO WHAT ADVICE WAS GIVEN and it seems that you DID NOT APPRECIATE THE TIME AND EFFORT GIVEN TO YOU. (Sorry had to capitalize).
3- I DO NOT THINK I'M BETTER THAN YOU IN ANYWAY NEITHER DID I POST IT IN A WAY TO SUGGEST PEOPLE WHO KNOW LESS THAN ME ARE STUPID, I was only astonished of how you ignored chrisrj28's advice and re-asked your question. You also ignored/still ignoring my post which had the PARTITION SIZE MENTIONED ON IT (which supports my theory that you don't pay full attention or read thoroughly the information given to you).
4-If you really came here to seek advice and knowledge you wouldn't have made disrespectful comments about those who are providing advice neither would you TOTALLY IGNORE the information given to you and simply re-ask your question . Even if you were able to get the information, your way in which you'll pass it to many others would be the same way.
You call yourself xda-apprentice?
You know what, its not your fault. It is mine, that I entered this thread in the first place and considered help.
Peace,
M.
Click to expand...
Click to collapse
1) Have you considered people on here on different levels? What seems EASY to YOU is NOT easy for OTHERS.
2) There are some really stupid people who BRICK there phone as a result of NOT following instructions.
3) No, you are the best, in fact, you are GOD right?
4) I am TOTAL NOVICE and prefer videos to see what I am doing so you telling me a,b,c with ext 2,3,4 which is bewildering (you might want to look that up)
I guess you are right, you should stick to people who are GOD's not like me.
---------- Post added at 02:19 PM ---------- Previous post was at 01:23 PM ----------
Egrier said:
According to the ROM you want, the partition size is 445 and the cache size is 5 if you have a TMOUS phone. If its the European model the you need a 150 with a cache size of 5 and you need to partition your sd card with 3 partitions. The easiest way to partition your phone is to use the HD2 tool kit. And if you need to partition your card, then use a program like EASEUS Partition Master. Hope that helps.
Sent from my Desire HD using XDA App
Click to expand...
Click to collapse
Thanks for the clear instructions. What does this mean and how would I do this "and you need to partition your sd card with 3 partitions"
xda_apprentice said:
...
Thanks for the clear instructions. What does this mean and how would I do this "and you need to partition your sd card with 3 partitions"
Click to expand...
Click to collapse
You need only 2 partitions. At first the big FAT32 Partition and a second partition with EXT3 formatted for your user apps (Size: 512MB-1024MB). Only one rom need a third SWAP partition, all other will ignore it or get problems to find the EXT3 partition.
The easiest way to create your second Ext3 Partition is in clockwork mode recovery, described like here.
But why a rom with graphic glitches (fix for that disable the hardware accelaration) and a camcorder with a 320er resolution. The graphic glitches are very annoying in games, unplayable. If you need a stable and fast gingerbread rom with sense look and features, try this one. You need 160MB system size and 5MB caches size for your clockwork partitions in HD2Toolkit for this rom.
Obvious troll is an obvious troll... Right?
Someone gave me an hd2... It took two threads and maybe 30 minutes to know the process... All of which were given/explained to you.
Check post 2 of the hyperdroid ROM in the Dev section. There is a 13 minute video that did an AMAZING job of showing each step. Maybe visual will help better, it does for me.
I prefer cm7/miui so I went with the 150MB version of cwr.
And no... I'm not better than you, but I read a lot more. I knew NOTHING about this phone.
Sent using the XDA app.
Nixda99 said:
You need only 2 partitions. At first the big FAT32 Partition and a second partition with EXT3 formatted for your user apps (Size: 512MB-1024MB). Only one rom need a third SWAP partition, all other will ignore it or get problems to find the EXT3 partition.
The easiest way to create your second Ext3 Partition is in clockwork mode recovery, described like here.
But why a rom with graphic glitches (fix for that disable the hardware accelaration) and a camcorder with a 320er resolution. The graphic glitches are very annoying in games, unplayable. If you need a stable and fast gingerbread rom with sense look and features, try this one. You need 160MB system size and 5MB caches size for your clockwork partitions in HD2Toolkit for this rom.
Click to expand...
Click to collapse
I looked at this rom and looks really good :
http://forum.xda-developers.com/showthread.php?t=1256423
Any good?
I want to use RCMix 3d's rom but it said "TMOUS needs CWR 5/270/5 is the minimum requirement". Mine now is 5/150/5 (I guess coz I don't know how to check it). So can you guys show me how to change that, thanks a lot.
mr_gem said:
I want to use RCMix 3d's rom but it said "TMOUS needs CWR 5/270/5 is the minimum requirement". Mine now is 5/150/5 (I guess coz I don't know how to check it). So can you guys show me how to change that, thanks a lot.
Click to expand...
Click to collapse
I've written a guide all about this, if you would like to read it.
kylew1212 said:
I've written a guide all about this, if you would like to read it.
Click to expand...
Click to collapse
Thanks for your reply but I'm kinda confused coz I usually use MAG menu to install roms. According to your instruction, should I switch to MAGLDR repartition instead of CLK repartition ?
And there are 3 numbers 5/270/5, what is the other "5" ?
mr_gem said:
Thanks for your reply but I'm kinda confused coz I usually use MAG menu to install roms. According to your instruction, should I switch to MAGLDR repartition instead of CLK repartition ?
And there are 3 numbers 5/270/5, what is the other "5" ?
Click to expand...
Click to collapse
Personally I prefer clk, but magldr is fine, and the number 5/270/5 mean the same for clk, and magldr.
In 5/270/5
The first 5 basically doesn't mean anything, it's saaying 5mb for cwm, but thats really a given.
The 270mb is system size
Then the second 5, like this 270/5 means 5 mb cache
Excuse me but 1 more question: Is it necessary to do a task29 again because I heard that doing this will harm HD2 especially Tmous version .
im not sure
I'm not sure about it harming the hd 2 with a task 29 I think its a good idea every once in a while its kinda like defragging a computer just cleans every out fresh I do it once or twice a month mine does just fine. Pls someone correct me if I'm wrong.
theres an hd2 toolkit which let lets you easily change the partition size and cache easily and on the fly, and same way for clk.
noob proof = )
I've written a guide that will walk you through everything. I recommend task 29 but theirs lots of contraversy saying that it isn't necessary. However, if if you have a problem and do a task 29 then 9.9 times out of 10 problem solved.
Sent from my HD2 using xda premium
i task 29 every time i flash a new rom, just me
never had a problem. it is time consuming reinstalling cwm, and clk or magdlr,
but it keeps me away from bad blocks. which i dont have =-)
just me lol, i recommend, it will solve lots of problems.
Ok I'm so through now thanks to all of you, XDA rocks
You can do it yourself,open the recovery folder,right klick on flash.cfg,open with editor.Now you can change the values of "boot yboot", "system ya", "cache ya" how it is on the Discription for the rom you would to flash.Now you must save it.
That´s all !!