Related
hey guys i have a HTC HD2 i already added the new radio
an installed magdlr ( i think thats the name) so far, i havnt had any luck flashin any roms...they flash, but never boot
i have this one flashed atm moment HyperDroidGBX-v12
but as i just started i cant post in that thread
sorry, i used the search bar, so dont eat me alive plz
i get to the blue android, but it just hangs, reboots, an does it again
help me out, what am i doin wrong
I have installed everything but when my phone boots into android, after about a minute it will just restart itself and continue the same over and over without ever fully going into android
^ kinda like this
but im usin a regualr battery
Did you qlso install clockworkmod with the correct partition size? If your partition is to small for the rom image boot loops are caused.
Sent from my HTC HD2
Assuming you have the right partition size go to clockwork cleardata/factoryreset then clear cache the go to advanced and clear dalvic rhen reboot
Sent from my Nexus One using xda premium
rauschkugl said:
Did you qlso install clockworkmod with the correct partition size? If your partition is to small for the rom image boot loops are caused.
Sent from my HTC HD2
Click to expand...
Click to collapse
yea i installed it, but im not sure if i did the partion size thingy?
maybe, but just in case i didnt, how do i do that step by step?
also do i have to fromat my sd card for this to work, its already fat 32
whynot66 said:
Assuming you have the right partition size go to clockwork cleardata/factoryreset then clear cache the go to advanced and clear dalvic rhen reboot
Sent from my Nexus One using xda premium
Click to expand...
Click to collapse
ill try that after soem one explain the pastion thing to me
although i think i did,i went to clockwork an set it to 1024
whynot66 said:
Assuming you have the right partition size go to clockwork cleardata/factoryreset then clear cache the go to advanced and clear dalvic rhen reboot
Sent from my Nexus One using xda premium
Click to expand...
Click to collapse
i set it to 1024,an 0 for the swap
an did everything in your post
still restarting, gettin worried
what do i now?
bumping
in the hopes of being helped just teeny bit quicker
you have partitioned your sd,not nand. i think your rom needs 5-150-5 nand partition. unrar attached file.connect phone to pc.in mgldr go to usb flasher- see usb flasher.....usb-right click on daf-run as administrator-after it finishes flash your rom using mgldr-ad recovery-install zip from sd-choose zip from sd-choose your rom.zip.after it finishes reboot.
(save this recovery folder in pc.when you need a different size of nand partition open flash.cfg with notepad and arrange it according to your needs.)
mutil said:
you have partitioned your sd,not nand. i think your rom needs 5-150-5 nand partition. unrar attached file.connect phone to pc.in mgldr go to usb flasher- see usb flasher.....usb-right click on daf-run as administrator-after it finishes flash your rom using mgldr-ad recovery-install zip from sd-choose zip from sd-choose your rom.zip.after it finishes reboot.
(save this recovery folder in pc.when you need a different size of nand partition open flash.cfg with notepad and arrange it according to your needs.)
Click to expand...
Click to collapse
thanks ive being beating the %^$# outta the f5 BUTTON all day
i did what u said
btu i dont comepletely understand how this works? care to explain
the instructions i used never said anything about partioning nand
what does that mean, an do
also i checked the thread for the build an didnt see any info regarding this
an do i have to do this everytime i change a build
i need all the info i can get
ALSO, it fails saying something in red like
nand boot failed (or very close)
HALP HALP!
SubZeroMaster said:
thanks ive being beating the %^$# outta the f5 BUTTON all day
i did what u said
btu i dont comepletely understand how this works? care to explain
the instructions i used never said anything about partioning nand
what does that mean, an do
also i checked the thread for the build an didnt see any info regarding this
an do i have to do this everytime i change a build
i need all the info i can get
ALSO, it fails saying something in red like
nand boot failed (or very close)
HALP HALP!
Click to expand...
Click to collapse
it s normal that nand boot fails, because you didnt flash your rom.zip from sd yet. nand partitioning arranges your phone's internal memory according to the need s of roms. if you use a rom with same nand partition size (e.g. miui roms or cm7 roms but not sense roms) you will not apply partition again, just wipe data/factory reset in ad recovery menu and flash the rom.
mutil said:
it s normal that nand boot fails, because you didnt flash your rom.zip from sd yet. nand partitioning arranges your phone's internal memory according to the need s of roms. if you use a rom with same nand partition size (e.g. miui roms or cm7 roms but not sense roms) you will not apply partition again, just wipe data/factory reset in ad recovery menu and flash the rom.
Click to expand...
Click to collapse
i used the program...fine
i wiped..fine
i flashed rom...fine
restarted fine...
didnt boot in to android???
whats goin on?
also thanks for the help so far, but dont abadon me yet plz
How about a fresh install?
That guy had bootloops, maybe the same error? anyway, Follow this post by me ,, it is a full & complete step by step on how to install the ROM you wanted (HyperGBX).
Most importantly, Swap Step 8 with your MAGLDR ROM from pongster's thread (HyperGBX)
Marvlesz said:
How about a fresh install?
That guy had bootloops, maybe the same error? anyway, Follow this post by me ,, it is a full & complete step by step on how to install the ROM you wanted (HyperGBX).
Most importantly, Swap Step 8 with your MAGLDR ROM from pongster's thread (HyperGBX)
Click to expand...
Click to collapse
followed this to the TEETH
an loopin......
ARRGGH plz guys dont forsake me just yet
also thx for every
bumptastic
142 people have viewed this thread
but only 4 or so people helped!
come on guys!!
i beatin the hell outta F5, come guys .....the longer i wait, im foneless
is there something im missing?
whats an how to nand pasrtion
^ the same for sd partionin
i stumped
NAND Partition 250MB - SD-EXT4 2GB what do these mean, an do i need em?
Where did you find these information? where did you find NAND partition 250 .... etc ?
Maybe you have bad blocks (which I hope not, because data cannot be written on them, resulting in some missing system files, thus giving you bootloops).
Check this thread : http://forum.xda-developers.com/showthread.php?t=1189544 and follow the instructions, then attach the log file.
SubZeroMaster said:
i beatin the hell outta F5, come guys .....the longer i wait, im foneless
is there something im missing?
whats an how to nand pasrtion
^ the same for sd partionin
i stumped
NAND Partition 250MB - SD-EXT4 2GB what do these mean, an do i need em?
Click to expand...
Click to collapse
man which rom you want to use? you had said hyperdoid and now you talk about 250mb nand which has nothing to do with hyperdroid!?
Marvlesz said:
Where did you find these information? where did you find NAND partition 250 .... etc ?
Maybe you have bad blocks (which I hope not, because data cannot be written on them, resulting in some missing system files, thus giving you bootloops).
Check this thread : http://forum.xda-developers.com/showthread.php?t=1189544 and follow the instructions, then attach the log file.
Click to expand...
Click to collapse
wouldlove to BUT
now windows is tellin me it can format my sd card
ive tried over an over
its stopin me from progressin
how do i get pass this
an thanks for everyone helpin get this far
SubZeroMaster said:
wouldlove to BUT
now windows is tellin me it can format my sd card
ive tried over an over
its stopin me from progressin
how do i get pass this
Click to expand...
Click to collapse
what does this mean? who said anything about sd card?
you're talking about the log file? why? is your sd card not working?
where did you read "250mb NAND Partition" ?
Marvlesz said:
what does this mean? who said anything about sd card?
you're talking about the log file? why? is your sd card not working?
where did you read "250mb NAND Partition" ?
Click to expand...
Click to collapse
saw it in in some guys signature (250 nand ) although i dont knwo if that relates to me
no, i cant put the recorvery stuff on my sd becuase, windows is saying i have to format first (then is says it cant)
is was fine yesterday, maybe all this "stuff" i may/may not have done something
anyway how i can fromat so i can proceed?
My HD2 wont successively boot into android. I've tried many Different Roms sense and non sense, but still wont work. I either get get a (status 0) error in CWM or it says it installs but i reboot and choose to boot nand via MAGLDR and get the error "no boot sources" I'm I doing something wrong? I wipe my system before each install and portion it correctly. I had it booting Andriod Cm7 via Haret and Cdlar or what ever. I'm stuck Please Help out
Renegade99 said:
My HD2 wont successively boot into android. I've tried many Different Roms sense and non sense, but still wont work. I either get get a (status 0) error in CWM or it says it installs but i reboot and choose to boot nand via MAGLDR and get the error "no boot sources" I'm I doing something wrong? I wipe my system before each install and portion it correctly. I had it booting Andriod Cm7 via Haret and Cdlar or what ever. I'm stuck Please Help out
Click to expand...
Click to collapse
What are your partition sizes? Particularily sense roms require a large partition. If your partition isn't large enough for the system, it will not boot.
Edit: Sorry I just reread where you said you partition is correctly.
Make sure your downloading the correct rom ?? Sorry I'm not much help on this.
Yeah, i partitioned it right 1024 and 0 swap, Sense roms give me a status 0 error and non sense give me that no boot sources error on MAGLDR
Did u tried cLK ? Did u did full install proces ?
Cjovecje! said:
Did u tried cLK ? Did u did full install proces ?
Click to expand...
Click to collapse
I dont have that installed? isnt that just Clockwork mod
every type of isntall has its steps. Did u followed exactly ?
Yeah...wipe, partition SD, install via zip CWM or at least that's what I do
Sent from my HTC HD2 using XDA App
Did u did task29 ?
Is this U´r first Try to flash Rom´s?
Renegade99 said:
Yeah, i partitioned it right 1024 and 0 swap, Sense roms give me a status 0 error and non sense give me that no boot sources error on MAGLDR
Click to expand...
Click to collapse
I think what he meant was is the system partition correct? Not SD-EXT.
Nigeldg said:
I think what he meant was is the system partition correct? Not SD-EXT.
Click to expand...
Click to collapse
Yea that's exactly what I meant if your system isn't partitioned correctly there will be boot problems every time. Search for "HD2 Toolkit" it makes it so much easier.
Task 29
Then install magldr or clk with the correct system partitions.*most important part*
Install clockwork mod
Flash your rom
Reboot and it should start fine.
Sent from my HD2 using xda premium
I have two HD2s this one is running off NAND Hard Droid 2. I did all the steps I did with this one. Flashed Hspl3 choose spl 2.08 after that was done flashed magldr then installed CWM via SD and portitioned the SD? Not sure about system. Swap 0 as it said in instructions. Flashed zip and I get the errors. Could someone tell how to task 29. Isn't that a nand wipe?
Sent from my HTC HD2 using XDA App
Needs that tool box thing xD
Sent from my HTC HD2 using XDA App
I'm on my phone so I can't give you the specific link. If you go to the guide in my signature I have a link to hd2 toolkit. You need this program. It will solve your problems because your system partitions are not correct. Swap and things like that matters but its on your SD card. Your problem is with the internal partitions.
Download the program I promise its worth it. If you don't like it delete it but at least try it so you can boot and experience android on nand.
If you want to use clk my guide might help you with that to.
Sent from my HD2 using xda premium
Task 29 deletes all data on your phone but not SD card.
Sent from my HD2 using xda premium
Alright I'll try it later when I'm on the computer
Sent from my HTC HD2 using XDA App
I don't know if I can ask my question in this topic, but I think partitioning is part of my issue. On my HD2, I installed Ice Cream Sandwich Beta7. Used Magdlr. At first it won't booit into android either, but that was because I used the recovery_1.3400MB. Later I used the 250MB.
But then I got problems with installing apps: Internal space was insufficient. So I read this topic:http://forum.xda-developers.com/showthread.php?p=20577589 See page 12.
So I followed these steps:
Backup your SD card data (and prefferably nandroid backup your rom) and use recovery to repartition your SD.
Go to recovery, advanced, Partition SD Card
Partitioning to 1024 works wel, but 2048 won't. I don't know why, cause it's a 2GB sd card. But after partitioning, Android isn't using the space on the sd-card.
I can manually copy apps to the SD card, but it still gives errors about insufficient internal memory......
2gb=2000mb that's a problem if only using a 2gb for partitioning over 2gigs xD
Sent from my HTC HD2 using XDA App
Renegade99 said:
2gb=2000mb that's a problem if only using a 2gb for partitioning over 2gigs xD
Sent from my HTC HD2 using XDA App
Click to expand...
Click to collapse
Actually 2GB = 2048 MB...
But still the question is; when I choose 1024, why doesn't android use this partition as extra storage?? So why am I getting errors of insufficient space?
Check your properties on the SD because they usually lie to you about how much storage it is. Its rarely plain out too gigs
Sent from my HTC HD2 using XDA App
Hi guys little help pleaseeeee over hereeee......
i installed win 7 after android ....dont like it...my sd was locked... i unlocked with nokia after 2 weeks !!! now im tryingggg to put android again and i CANTTTT !!!! i cantttttt im going to jump from the building i dont now what to doooooooooo ... i trying to install tbd rom and im getting the messeage (status 0) installation aborted !
a guide please...im comfused.... i dont now what to flash first ... i have flash hspl after mag after recovery...... what recovery is the right one? 150 ? 250? 400 ? anyway then in recovery go to wipe data factory then wipe cache partition then wipe dalvik cache then partition sd card 1024m and then copy the zip rom in sd and install it with recovery
win7???tell me how u did it....
wp7???
format your sdcard with the sdcard reader---download a rom copy to sd--
flash maglrd1.1.3---flash recovery5---flash rom---reboot----wait for a while---done..
you can see the correct size of Recovery in the description of the ROM which you want to install
Sent from my HTC HD2 using XDA
110718 said:
Hi guys little help pleaseeeee over hereeee......
i installed win 7 after android ....dont like it...my sd was locked... i unlocked with nokia after 2 weeks !!! now im tryingggg to put android again and i CANTTTT !!!! i cantttttt im going to jump from the building i dont now what to doooooooooo ... i trying to install tbd rom and im getting the messeage (status 0) installation aborted !
a guide please...im comfused.... i dont now what to flash first ... i have flash hspl after mag after recovery...... what recovery is the right one? 150 ? 250? 400 ? anyway then in recovery go to wipe data factory then wipe cache partition then wipe dalvik cache then partition sd card 1024m and then copy the zip rom in sd and install it with recovery
Click to expand...
Click to collapse
Half of your post is indecipherable, please learn how to spell! Using multiple letters won't help you in any way.
As for your question, the correct partition sizes will be stated in your ROM of choice. Just use the HD2 NAND toolkit to make everything easier.
u need
1-HSPL4.exe
2-Radio 2.08.50.05 + task29
3-MAGLDR113_DAF
4-Recovery_150M_system_5M_cache[v3.0.2.5]
and custom rom fond here http://android.hd2roms.com/
gsmxgsm said:
u need
1-HSPL4.exe
2-Radio 2.08.50.05 + task29
3-MAGLDR113_DAF
4-Recovery_150M_system_5M_cache[v3.0.2.5]
and custom rom fond here http://android.hd2roms.com/
Click to expand...
Click to collapse
I would suggest the newer radio...
Sent from my HTC Sensation XL with Beats Audio X315e using xda premium
gsmxgsm said:
u need
1-HSPL4.exe
2-Radio 2.08.50.05 + task29
3-MAGLDR113_DAF
4-Recovery_150M_system_5M_cache[v3.0.2.5]
and custom rom fond here http://android.hd2roms.com/
Click to expand...
Click to collapse
Yes, this, except skip steps 1 to 4 and only flash a new recovery
As I said, use the HD2 NAND toolkit to repartition, it makes things much easier. If you want to you can also download the suggested Recovery_150M_system_5M_cache then change the file inside that folder called Flash.cfg to the required size
saroni said:
win7???tell me how u did it....
wp7???
format your sdcard with the sdcard reader---download a rom copy to sd--
flash maglrd1.1.3---flash recovery5---flash rom---reboot----wait for a while---done..
Click to expand...
Click to collapse
I dont remember how i did it with windows mobile 7...in mag i did something with the 24 last nand i think after i flash a rom ithink...
wait ....
1. flash mag (in bootloader run the rom update utility exe) right?
2. flash recovery (cant find in rom what recovery to install i look a lot of times ) this is the rom : http://forum.xda-developers.com/showthread.php?t=1275119 can you find it PLEASEEEEE ????
3. copy rom in sd and run it from recovery in (run zip file from sd ) right?
This is the steps?????????
kali926 said:
you can see the correct size of Recovery in the description of the ROM which you want to install
Sent from my HTC HD2 using XDA
Click to expand...
Click to collapse
i cant find it please can you look? http://forum.xda-developers.com/showthread.php?t=1275119
Nigeldg said:
Half of your post is indecipherable, please learn how to spell! Using multiple letters won't help you in any way.
As for your question, the correct partition sizes will be stated in your ROM of choice. Just use the HD2 NAND toolkit to make everything easier.
Click to expand...
Click to collapse
Sorry not very good with english....nand toolkit? hmmm.. ok i look for that... thanks...
gsmxgsm said:
u need
1-HSPL4.exe
2-Radio 2.08.50.05 + task29
3-MAGLDR113_DAF
4-Recovery_150M_system_5M_cache[v3.0.2.5]
and custom rom fond here http://android.hd2roms.com/
Click to expand...
Click to collapse
i have HSPL3_PKG its not good?
radio i think i have 2.08 yes
mag 113 ok
and recov 150 ok...
and what is the steps..what to flash first?????
Nigeldg said:
Yes, this, except skip steps 1 to 4 and only flash a new recovery
As I said, use the HD2 NAND toolkit to repartition, it makes things much easier. If you want to you can also download the suggested Recovery_150M_system_5M_cache then change the file inside that folder called Flash.cfg to the required size
Click to expand...
Click to collapse
Ok so..i will flash the 150 recovery only? if i want to do it fresh? from the start how i will do it?
110718 said:
i have HSPL3_PKG its not good?
radio i think i have 2.08 yes
mag 113 ok
and recov 150 ok...
and what is the steps..what to flash first?????
Click to expand...
Click to collapse
All you need to do is flash a new recovery. This post says it's 172mb. Task29 and stuff really won't help you uness you are experiencing major problems.
Nigeldg said:
All you need to do is flash a new recovery. This post says it's 172mb. Task29 and stuff really won't help you uness you are experiencing major problems.
Click to expand...
Click to collapse
My hd2 is now with the unfinished rom install ..its in the error ...should i format something? no? only recovery? ok exist recovery 172 mb? i have 150m 250m and 400mb ...please helpp..... i dont understand....
Dont need to ext partition the sd??? i have eu model ! i dont undestand
110718 said:
Dont need to ext partition the sd??? i have eu model ! i dont undestand
Click to expand...
Click to collapse
Yes you need to create an SD EXT partition, but this can easily be done in CWM. To flash a 172 MB partition, download any recovery size then open the file flash.cfg (not flash.cfg.txt) with notepad, then change the system partition size to 172 MB and leave everything else the same
Nigeldg said:
Yes you need to create an SD EXT partition, but this can easily be done in CWM. To flash a 172 MB partition, download any recovery size then open the file flash.cfg (not flash.cfg.txt) with notepad, then change the system partition size to 172 MB and leave everything else the same
Click to expand...
Click to collapse
I Install the right recovery and THE PHONE WORK !!!! YEAAA I DID IT!!!! but without the steps you are saying ..I didn't do any partition ! Now? My phone don't work properly ??? My Rom is tbd 3.6 the last..
110718 said:
I Install the right recovery and THE PHONE WORK !!!! YEAAA I DID IT!!!! but without the steps you are saying ..I didn't do any partition ! Now? My phone don't work properly ??? My Rom is tbd 3.6 the last..
Click to expand...
Click to collapse
well if your using the TBD 3.6 on an eu phone you will need an sd ext of at least 1gig
if your unwilling to read the rom thread then maybe you shouldnt be trying to flash your phone
Kameirus said:
well if your using the TBD 3.6 on an eu phone you will need an sd ext of at least 1gig
if your unwilling to read the rom thread then maybe you shouldnt be trying to flash your phone
Click to expand...
Click to collapse
Massive +1 to this, if you can't be bothered to read don't bother flashing anything. Seriously.
Kameirus said:
well if your using the TBD 3.6 on an eu phone you will need an sd ext of at least 1gig
if your unwilling to read the rom thread then maybe you shouldnt be trying to flash your phone
Click to expand...
Click to collapse
No its not that ! im new to this and i dont now good english my phone was locked from win 7 1 month and i was trying trying trying by my self to fix it ! yesterday i run again for the first time android again.. with a lot of reading and time ! and im not expert on mobile ... all this seems to me very difficult ! i try to set up a partition with the other recovery i have but i was getting always error now i install the proper recovery from the tbd post.. (TBD_4EXT_New_7_172_7)
and the phone works but i dont understand how to do partition and i dont now if i have done partition and i dont now it...my card when i connect it to pc is 13gb but my sd card is 16 gb !! where is the other 3gb ??? is there a partision? how can i see if i have it in my hd2 ?????
hi
i have an htc hd2 sfp and i flashed android from this post http://forum.xda-developers.com/showthread.php?t=1268580
flashed hspl 2.08.hspl
rom 2.15.50.14europ
magldr1.13
formated sd
kernel marc 1.08
every think is ok installed from zip in cwm
but when i finish installing kernel and reboot my steel on face picture is this normal or i should see lines for installing in my screen ???
excuse my english and if i am wrong pleas help me and explain me how can i install and run android from nand and what's the best rom for android on htc hd2 (stable and no freez)
thanks a lot for replay
Did you flash the correct partition size (170MB)? Do you have an EXT Partition on your SD card? The translation isn't the best so I'm going to assume that you installed the kernel successfully but are stuck in a bootloop of some sort.
Nigeldg said:
Did you flash the correct partition size (170MB)? Do you have an EXT Partition on your SD card? The translation isn't the best so I'm going to assume that you installed the kernel successfully but are stuck in a bootloop of some sort.
Click to expand...
Click to collapse
first thanks for replying
i have formated my sd car first partition 7go fat32 primary and 1go ext4 primary
but flash the correct partition i don't know what is 170mb partition
Use the HD2 Toolkit, it explains makes things simple. Read the guides in my signatures too, they should also clear a few things up.
Hi,
I am currently using Rom from tyween: http://forum.xda-developers.com/showthread.php?t=933951 and I would like to install a new one from Tytung http://forum.xda-developers.com/showthread.php?t=2224469 .
My questions:
1. in description of tytungs Rom is stated that NAND version is for USA T-mobile so I assume that with my international version I have to use the other two versions and if so then the only way to install it is using aurora installer?
2. Nevertheless I tried NAND version installed it using CWM but then it got stuck on loading screen, could this problem be solved by this patch? http://forum.xda-developers.com/showpost.php?p=40623956&postcount=821
3. Is it possible to use Rom Manager to install this Rom? I have only tried CWM method and this one seems also really easy to use.
Thank you for your answers!!!
peter.l said:
Hi,
My questions:
1. in description of tytungs Rom is stated that NAND version is for USA T-mobile so I assume that with my international version I have to use the other two versions and if so then the only way to install it is using aurora installer?
Click to expand...
Click to collapse
Nand is divided into two: 1- Pure Nand (EVERYTHING is on the NAND of the device) and 2- Nand with DataOnExt (as the name implies, some of the data will be stored on an EXT partition on your SD card).
Since the international version of the HD2 only has about half a gig of storage, if you fit everything into the NAND you won't have enough space left for you to install apps and whatnot. If you want it on NAND, you need to choose the second option (some data on the sdcard), but you need to make sure you have an EXT partition on your sd card first (if you don't know how to make one, search).
And "aurora" (you mean aroma*) is just a path, it IS like you said THE installer. It's got nothing to do with your installation. It is just a fancy make-up for the old installation method. Yes, you'll have to use it.
peter.l said:
2. Nevertheless I tried NAND version installed it using CWM but then it got stuck on loading screen, could this problem be solved by this patch? http://forum.xda-developers.com/showpost.php?p=40623956&postcount=821
Click to expand...
Click to collapse
No, that patch is for something else. Your problem is different.
If you mean:
1- NAND Only, then you may have not made enough partition space for the system. (Either way, you shouldn't use this one, use NAND WITH dataonext).
but if you mean 1- NAND with DataOnExt, then it is either your partition size is too small or you do not have a proper sdcard ext partition.
peter.l said:
3. Is it possible to use Rom Manager to install this Rom? I have only tried CWM method and this one seems also really easy to use.
Thank you for your answers!!!
Click to expand...
Click to collapse
It's the same thing. When you select "Install ROM" in ROM Manager, it will actually reboot your device into CWM and you will have to follow the steps of Aroma as well. Yes, you can use it if you have cLK bootloader and not magldr.
You are welcome
According to your answer, I have to download AROMA installer and use it for installing new Rom. In DataOnExt version will 1 Gb partition be enough?
peter.l said:
According to your answer, I have to download AROMA installer and use it for installing new Rom. In DataOnExt version will 1 Gb partition be enough?
Click to expand...
Click to collapse
No, Aroma is *included* in the .zip file of the ROM. Just download the ROM, flash from recovery normally but instead of the usual text of procedure, you'll see a fancy screen where you get to configure the ROM before it is installed.
In my opinion, yes, 1GB is more than enough.
recover
Hi.i can not enter to recovery in this rom.Can someone help me.I installed by cwn
exlord1 said:
Hi.i can not enter to recovery in this rom.Can someone help me.I installed by cwn
Click to expand...
Click to collapse
CWM is independent from the ROM you install.
If you are talking about "boot into recovery" from within the ROM, that's a rom's feature and does not have to be included in it. You can reach the recovery by rebooting your phone into MAGLDR and then choosing the option AD. Recovery or something like that.
Just to add a little to Marvlesz's answer, reboot into recovery/bootloader on any ROM will just reboot the phone normally if you have MAGLDR. To access CWM just hold power for the MAGLDR menu then select 8. AD Recovery. If you use cLK on the other hand, reboot into recovery does work if I'm not mistaken.
I tried to install this ROM using various settings (DataOnExt / Native SD, wipe/no wipe, magldr / ppp...) but phone always ends up rebooting itself after htc loading screen. I did partition SD card to FAT 32 (primary) and 1GB EXT4 (primary).
What could be the problem and how to solve it?
Thank you!
peter.l said:
I tried to install this ROM using various settings (DataOnExt / Native SD, wipe/no wipe, magldr / ppp...) but phone always ends up rebooting itself after htc loading screen. I did partition SD card to FAT 32 (primary) and 1GB EXT4 (primary).
What could be the problem and how to solve it?
Thank you!
Click to expand...
Click to collapse
It could literally be ANYTHING. Follow this guide:
http://forum.xda-developers.com/showpost.php?p=16528026&postcount=7
and I think you'll be good, please read everything there.
peter.l said:
I tried to install this ROM using various settings (DataOnExt / Native SD, wipe/no wipe, magldr / ppp...) but phone always ends up rebooting itself after htc loading screen. I did partition SD card to FAT 32 (primary) and 1GB EXT4 (primary).
What could be the problem and how to solve it?
Thank you!
Click to expand...
Click to collapse
What /system partition size did you use? Make sure it's big enough for the ROM you're trying to flash.
Nigeldg said:
What /system partition size did you use? Make sure it's big enough for the ROM you're trying to flash.
Click to expand...
Click to collapse
EXT4 = 1GB. I partitioned SD card with Mini Tool Partition Wizard, then copied Zip on SD card, wiped data (factory reset + dalvik) installed ROM. To me it feels like I did everything according to instructions...
peter.l said:
EXT4 = 1GB. I partitioned SD card with Mini Tool Partition Wizard, then copied Zip on SD card, wiped data (factory reset + dalvik) installed ROM. To me it feels like I did everything according to instructions...
Click to expand...
Click to collapse
No, not your SD EXT partition, the partition you flashed when flashing CWM.
Nigeldg said:
No, not your SD EXT partition, the partition you flashed when flashing CWM.
Click to expand...
Click to collapse
I have 150 mb. So for this ROM should I use 250 or 400?
peter.l said:
I have 150 mb. So for this ROM should I use 250 or 400?
Click to expand...
Click to collapse
285. To create that, go to wherever your CWM thing is stored on your PC, open the CWM folder, open the file flash.cfg (not flash.cfg.txt.) in notepad (it should open in this way automatically) then change the value next to the line beginning 'SYSTEM...' from 150 to 285, keeping everything else exactly the same.