Related
How can I overclock my gene ?
over clocking gene
there are different ways brother , you need to basically install softwares like Omap or there is a different one which is slightly advanced ,also give you battery status info.....
but make sure you not boost it up more that 40 % of your default clock speed as it is not reccomended...................
Bro'
What are the advantages & disadvantages of overclocking.
Thanks....
rex4u said:
Bro'
What are the advantages & disadvantages of overclocking.
Thanks....
Click to expand...
Click to collapse
Advantage: Your system will run a Hell lot faster (you will love it )
Disadvantage: Slight battery performance detoriation .
be carefull Overcloking
hi
this is just for ur info ie if u value ur phone i do have this omap my 3400i as im using sumits vanilamanila but i was told that over cloking could damage ur phone so do be carefull ask around and then do it
this is for ur info
rex4u said:
Bro'
What are the advantages & disadvantages of overclocking.
Thanks....
Click to expand...
Click to collapse
You can safely overclock your CPU upto 20% of your CPU speed that is upto 240MHz. But its better to use CPU scalar as that saves battery life.
Overclock
bryangopan said:
there are different ways brother , you need to basically install softwares like Omap or there is a different one which is slightly advanced ,also give you battery status info.....
but make sure you not boost it up more that 40 % of your default clock speed as it is not reccomended...................
Click to expand...
Click to collapse
Would you mind telling me where to get these utilities?
i tried two times for overclocking and my sim card got corrupted both time.
so in my case it kills sim card.
deepv84 said:
i tried two times for overclocking and my sim card got corrupted both time.
so in my case it kills sim card.
Click to expand...
Click to collapse
Whoa..
Heard that first time..
Had once overclocked mine upto 240Mhz for some 15 min or so..
The phone is quite responsive then but drains battery fast and gets hot fast..
Over clocking is good but not recommended becoz it degrades the Battery life and heating of phone and circuit board...!!
overclocking is vry dangerous......it can harm ur gene,so be carefull while overclocking ur gene......
If someone does overclock, then do share your experience as its dangerous so share if you did it successfully.
Okay i start with my 1st RAMUSAGE
its about 190-240mb then i use v6supercharger and find bloatware and freeze of all them so that they will not run on background
and then i GOT 171-186-220mb or RAM so im thinking if there anymore bloatware?all of them maybe???
coz somewhere here he helps me i forgot his name but he go 130-160mb RAM usage using repencis with v6 and freeze bloatware
thanks in advance More power XDA
yabyuh22 said:
Okay i start with my 1st RAMUSAGE
its about 190-240mb then i use v6supercharger and find bloatware and freeze of all them so that they will not run on background
and then i GOT 171-186-220mb or RAM so im thinking if there anymore bloatware?all of them maybe???
coz somewhere here he helps me i forgot his name but he go 130-160mb RAM usage using repencis with v6 and freeze bloatware
thanks in advance More power XDA
Click to expand...
Click to collapse
i do beleive ram usage of repencis 3.5 is small...creeds 3.5 is the one that has very high ram usage
ronnieryan said:
i do beleive ram usage of repencis 3.5 is small...creeds 3.5 is the one that has very high ram usage
Click to expand...
Click to collapse
Hmm..nope imo both have heavy ram consumption Creeds better with an init.d working kernel since it got very good init.d scripts included in it.
i think it depends on application that start on boot.. like dps im the man that dont want music though kinda want it a bit.. D at 1st install i got 190-240 just like mention because of built in apps try to use it D
hitme987 said:
Hmm..nope imo both have heavy ram consumption Creeds better with an init.d working kernel since it got very good init.d scripts included in it.
Click to expand...
Click to collapse
what do you prefer? repencis v3.5 or Creeds 3.5?
yabyuh22 said:
i think it depends on application that start on boot.. like dps im the man that dont want music though kinda want it a bit.. D at 1st install i got 190-240 just like mention because of built in apps try to use it D
Click to expand...
Click to collapse
DSP takes max of 4mb ram bro. Not a big deal. Creeds 3.5 has very minimal running apps compared to rep 3.5 and it has stock kernel. Beginners dont know how to use repencis kernel effectively, if they dont underclock the cpu and change governers/i/o or stuff , creeds 3.5 is better since stock kernel is better optimized for normal usage
hitme987 said:
DSP takes max of 4mb ram bro. Not a big deal. Creeds 3.5 has very minimal running apps compared to rep 3.5 and it has stock kernel. Beginners dont know how to use repencis kernel effectively, if they dont underclock the cpu and change governers/i/o or stuff , creeds 3.5 is better since stock kernel is better optimized for normal usage
Click to expand...
Click to collapse
HEY BRAH?! can you prefer a link where i can use the repencis kernel much better im new to this stuff but im a fast learner D can i be your apprentice?
Hmm..no problem. Just shoot with whatever you want. Im quite busy these days due to my university schedules a bit hectic, but can spend some time with this stuff.
Heres the repencis kernel you asked for :
http://forum.xda-developers.com/showpost.php?p=27676983&postcount=657
hitme987 said:
Hmm..no problem. Just shoot with whatever you want. Im quite busy these days due to my university schedules a bit hectic, but can spend some time with this stuff.
Heres the repencis kernel you asked for :
http://forum.xda-developers.com/showpost.php?p=27676983&postcount=657
Click to expand...
Click to collapse
thanks for this D so what i need to do is to underclock my SGY??
im using repencis v3.5
my kernel is
2.6.35.7
[email protected]#36
so how i will use this? kernel stuff?
yabyuh22 said:
thanks for this D so what i need to do is to underclock my SGY??
im using repencis v3.5
my kernel is
2.6.35.7
[email protected]#36
so how i will use this? kernel stuff?
Click to expand...
Click to collapse
Your kernel support underclocking by using setcpu or no-frills cpu or antutu cpu master or cpu tuner.
Once you use them youll get to know.
Use Lagfree or lionheart or smoothass governer with sio i/o for gaming or heavy performance.
Use smartassv2 governer and sio i/o for balanced performance.
Use ondemand or conservative governor with deadline i/o for battery saving.
hitme987 said:
Your kernel support underclocking by using setcpu or no-frills cpu or antutu cpu master or cpu tuner.
Once you use them youll get to know.
Use Lagfree or lionheart or smoothass governer with sio i/o for gaming or heavy performance.
Use smartassv2 governer and sio i/o for balanced performance.
Use ondemand or conservative governor with deadline i/o for battery saving.
Click to expand...
Click to collapse
OMG! so many new word poping in my head right now
the set cpu thing i set it ung 624x312 coz i see it on the toturial on REPENCIS v3.5
but this
"Use Lagfree or lionheart or smoothass governer with sio i/o for gaming or heavy performance.
Use smartassv2 governer and sio i/o for balanced performance.
Use ondemand or conservative governor with deadline i/o for battery saving"
can you refer a link to me? if you could it will be nice..
yabyuh22 said:
OMG! so many new word poping in my head right now
the set cpu thing i set it ung 624x312 coz i see it on the toturial on REPENCIS v3.5
but this
"Use Lagfree or lionheart or smoothass governer with sio i/o for gaming or heavy performance.
Use smartassv2 governer and sio i/o for balanced performance.
Use ondemand or conservative governor with deadline i/o for battery saving"
can you refer a link to me? if you could it will be nice..
Click to expand...
Click to collapse
Hmm..Its the frequencies mate. It ranges 312-624-832. Use 312-624 for battery saving/balanced and 312-832 for performance/more balanced and use the governor combo I gave before. Just mess around with the setcpu app. Youll know it eventually. And use the latest setcpu . It has more features and easy to understand,
hitme987 said:
Hmm..Its the frequencies mate. It ranges 312-624-832. Use 312-624 for battery saving/balanced and 312-832 for performance/more balanced and use the governor combo I gave before. Just mess around with the setcpu app. Youll know it eventually. And use the latest setcpu . It has more features and easy to understand,
Click to expand...
Click to collapse
now i get between the setting about frequencis so i will use 312-832
i got the set cpu 3.0.0 and i will apply it
and what about the governor thingy? where will i get them?
and the benefits all of these is for ram and for fast and stable SGY?
yabyuh22 said:
now i get between the setting about frequencis so i will use 312-832
i got the set cpu 3.0.0 and i will apply it
and what about the governor thingy? where will i get them?
and the benefits all of these is for ram and for fast and stable SGY?
Click to expand...
Click to collapse
Check out the app dude. It got everything there. Its for the purposes I mentioned before. Basically, it is for more battery saving
hitme987 said:
Check out the app dude. It got everything there. Its for the purposes I mentioned before. Basically, it is for more battery saving
Click to expand...
Click to collapse
thanks master!!! i just download the set cpu 3.0.4 D i must explore it ima get you back later tomorrow thanks for the time i mean it really thanks D:good::good:
And oh last question do I set 832 to max and 312 to min??
yabyuh22 said:
And oh last question do I set 832 to max and 312 to min??
Click to expand...
Click to collapse
Yes. Its obvious dude.
hitme987 said:
Yes. Its obvious dude.
Click to expand...
Click to collapse
hey master.. i got shock its 1st time in history of my battery
when ever i got to sleep example my battery percent it 86%
when i wake up my battery is either 86%-85%-84% its just like that i will not go 79% like that
but when i wake up i touch my phone and its kinda bit Hot this time my battery when i sleep is 92% then when i woke up
the battery percentage is 56%
what should i do? i set the right
i set ondemand and deadline
and 312min and 832 max
Try opening terminal and input
su
a2sd lowmem-ultimate
Sent from my GT-S5360 using xda premium
yabyuh22 said:
hey master.. i got shock its 1st time in history of my battery
when ever i got to sleep example my battery percent it 86%
when i wake up my battery is either 86%-85%-84% its just like that i will not go 79% like that
but when i wake up i touch my phone and its kinda bit Hot this time my battery when i sleep is 92% then when i woke up
the battery percentage is 56%
what should i do? i set the right
i set ondemand and deadline
and 312min and 832 max
Click to expand...
Click to collapse
Wierd. Are you sure after this change only this happens? Change governor to bcm21533 and io to noop and 312-832 for the stock or original your before frequency. Try using smartass v2 or interactive or conservative and check the battery drain.
Hey there ,
so i wanted to share share my awsome Undervolting results with you
At first im running on Chasmodo's latest CM 10.1 i really appreciate his work ! I use the latest CM 10.1 Kernel.
With his rom and this voltages u find under this introduciton text i could get nearly a month with Standby time
(without doing anything , Wlan turned on , Data off) i attached a screenshot (29 Days and 5 Hours sorry for the German language)
Every day i plug my N7000 out from the Loading station its 5am on 3pm i lost 1%.
to change the Voltages i use SetCPU (full version)
1400 MHz
1200 mV (Stock: 1350mV)
1200 MHz
1100 mV (Stock: 1275mV)
1000 MHz
1000 mV (Stock: 1175mV)
800 MHz
925 mV (Stock: 1100mV)
500 MHz
900 mV (Stock 1000mV)
200 MHz
800 mV (Stock: 975mV)
So i dont know my Voltage group sorry guys , if this values are not working just go in 25mV steps lower from your stock voltage
until the CPU gets unstable or crashes than u know that u cant go lower just do this with every clocking !
I also used this voltages on XXLSC Ultimate Rom with the HydraCoreNirvana Kernel i had fantastic results too but not that good like i get with the Asylum CM 10.1.
PS: Just this Voltages wont give you very good Battery life if your Rom / Settings is/are eating your battery. If you get better results with
lower results (stable) just go ahead and post it but im sure this values are nearly the lowest stable u can get
Code:
Its [U]impossible [/U]to hard brick your device with Undervolting , you only could get a soft brick if you use (Set on Boot) and your voltages will crash your System after boot. thats easy to fix just after the phon booted up fast go into SuperSU and delete the root rights for your Undervolting tool.
Thanks for Reading and if i you liked this push the Thanks button =) !:victory:
Thanks man
I think you should say which Voltgroup (A, B or C) your note is. Because those freq are really low (I think too much low for my note, that's voltgroup B).
Do you remember which voltgroup has your note, when you installed hydracore kernel?
Better i would buy a spare battery rather than spoiling my devices performance. We arr not in 1000BC with no electricity. Sure every one can charge a spare and can switch it.
Sent from my GT-N7000 using xda app-developers app
Bad-Pixel said:
I think you should say which Voltgroup (A, B or C) your note is. Because those freq are really low (I think too much low for my note, that's voltgroup B).
Do you remember which voltgroup has your note, when you installed hydracore kernel?
Click to expand...
Click to collapse
Hey there i dont remember never looked at the Voltgroup sorry so there is no other way to view my Voltgroup ?
Btw just try the voltages without autostart and u will see if your system reboots or if it works if not just go in 25mV steps higher :highfive:
qazibasit said:
Better i would buy a spare battery rather than spoiling my devices performance. We arr not in 1000BC with no electricity. Sure every one can charge a spare and can switch it.
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
Why ?
I cant get your argument my performance is the same speed while im gaming browsing same performance than before .. no impact , drops .. a spare battery ? So what about i dont want to switch my battery ? there is no need for it my battery stays alive for atleast 2-3 days when im doing something with it .
how to do if i only have rom toolbox
SkyKer93 said:
Hey there i dont remember never looked at the Voltgroup sorry so there is no other way to view my Voltgroup ?
Btw just try the voltages without autostart and u will see if your system reboots or if it works if not just go in 25mV steps higher :highfive:
Click to expand...
Click to collapse
It's a feature of the hydracore kernel only I think, because its read a particular value (something about mainboard and/or cpu) and the kernel automatically apply dedicated undevolt values. You could see it in system information, where hydracore kernel is detected. Without it, I think you can't do anything :/
Anyway, sincerely I remember some time ago I tried to lower my already undervolted cpu voltages, and I got freezes. I will try to go lower a bit, hoping it will works. A very important thing, is not only the lower battery drain, but also the lower cpu temps.
ahhl said:
how to do if i only have rom toolbox
Click to expand...
Click to collapse
I bought rom toolbox full sometime ago, when there was sales. If I remember correctly, there is a section relative to the cpu control, but I don't remember if it was undervolting capable also. You should start to search it from there (I'm sorry, I don't have the app installed anymore, so I can't help you properly... In case, use voltage control app)
Sent from my GT-N7000 using xda premium
I dont think it has UV feature. Just CPU freq control
nokiamodeln91 said:
I dont think it has UV feature. Just CPU freq control
Click to expand...
Click to collapse
Yes, you're right, I just checked (installing my bought pro version) and it hasn't the uv features. Anyway, as I suggested, he can use voltage control (even if I don't know if his kernel support the uv/oc)
Sent from my GT-N7000 using xda premium
nokiamodeln91 said:
I dont think it has UV feature. Just CPU freq control
Click to expand...
Click to collapse
Bad-Pixel said:
Yes, you're right, I just checked (installing my bought pro version) and it hasn't the uv features. Anyway, as I suggested, he can use voltage control (even if I don't know if his kernel support the uv/oc)
Click to expand...
Click to collapse
What do you mean by Rom Toolbox doesn't have voltage control?
Tap kernel tweaks, then any frequency and you'll find a voltage slider in there.
chasmodo said:
What do you mean by Rom Toolbox doesn't have voltage control?
Tap kernel tweaks, then any frequency and you'll find a voltage slider in there.
Click to expand...
Click to collapse
Maybe it depend from the kernel I'm using now (philz 3.99 on BurtRom tw rom) but I can't able to do what you said. I checked on rom toolbox pro again, and I didn't see any uv feature. Just goverors/kernel tweaks (like vm or fs features) or profiles management... Nothing else.
Anyway I'm using tegrak ultimate app to Undervolt my cpu and gpu, and it works perfectly, so I don't miss so much that feature.
Sent from my GT-N7000 using xda premium
I don't know - I am not sure if Undervolting could hard-brick or damage the hardware but back then running GB roms I had undervolted FM Kernel and there was trrrr trrr trrr like sound from my Note.
Be careful.
I have to do a custom rom just to see if its all true....otherwise am not interested at all in undervolting my phone. Hope its true...
Sent from my GT-N7000 using xda app-developers app
Boy124 said:
I don't know - I am not sure if Undervolting could hard-brick or damage the hardware but back then running GB roms I had undervolted FM Kernel and there was trrrr trrr trrr like sound from my Note.
Be careful.
Click to expand...
Click to collapse
never had any problems and just logical cpus could brick if you give them too mutch voltage , if you give them less voltage the system only can crash your sound could have been beacuse it crashed so really u cant hard brick your device with undervolting ... maybe a softbrick if your unstable voltage settings are on autostart.
qazibasit said:
I have to do a custom rom just to see if its all true....otherwise am not interested at all in undervolting my phone. Hope its true...
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
no need for a custom rom mate , you just need a custom kernel wich is able to uv for example HydraCoreNirvana
Bad-Pixel said:
Maybe it depend from the kernel I'm using now (philz 3.99 on BurtRom tw rom) but I can't able to do what you said. I checked on rom toolbox pro again, and I didn't see any uv feature. Just goverors/kernel tweaks (like vm or fs features) or profiles management... Nothing else.
Anyway I'm using tegrak ultimate app to Undervolt my cpu and gpu, and it works perfectly, so I don't miss so much that feature.
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
Hey there , you cant uv with Philz kernel just read his thread check his FAQ there hes writing that hes not supporting
oc/uv its just a repacked stock kernel
use HydraCoreNirvana but when you download the kernel check that its the OC version if not than you cant change your voltage like with Philz kernel.
:highfive:
SkyKer93 said:
Hey there , you cant uv with Philz kernel just read his thread check his FAQ there hes writing that hes not supporting
oc/uv its just a repacked stock kernel
use HydraCoreNirvana but when you download the kernel check that its the OC version if not than you cant change your voltage like with Philz kernel.
:highfive:
Click to expand...
Click to collapse
You can you can
Just use tegrak ultimate Overclock app. I bought it because I think it's the only who give you the possibility to Undervolt the gpu also. Initially, philz kernel wasn't supported, but now it is. I undervolted my cpu setting the values that I had using the hydracore kernel oc. And today I lowered them of another - 25mV also. Everything works nicely until now
Sent from my GT-N7000 using xda premium
qazibasit said:
Better i would buy a spare battery rather than spoiling my devices performance. We arr not in 1000BC with no electricity. Sure every one can charge a spare and can switch it.
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
Nice attitude you are showing there. Oh, there is plenty of power, let's waste.it! Really, that kind off attitude is definitely going to make the world a better place
What's more why do you think undervolting does influence the performance? It only influences the power consumtion and if you go too far it does render the phone unstable. But it certainly does not in-, or decrease the cpu's performance.
Sent from my revived Galaxy Note
---------- Post added at 01:50 AM ---------- Previous post was at 01:45 AM ----------
Bad-Pixel said:
You can you can
Just use tegrak ultimate Overclock app. I bought it because I think it's the only who give you the possibility to Undervolt the gpu also. Initially, philz kernel wasn't supported, but now it is. I undervolted my cpu setting the values that I had using the hydracore kernel oc. And today I lowered them of another - 25mV also. Everything works nicely until now
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
Yep tegrak definitely does the trick with PhilZ kernels. I have been using it for at least 8 months now and my phone is undervolted too. Only the highest cpu state is overvolted because I overclocked it to 1552 MHz instead of 1400.
Sent from my revived Galaxy Note
I would love this kernel under ubls4 if it has a proper exfat support. Until this is not fixed like philz kernel, I can not test or try
Sent from my GT-N7000 using xda premium
altae said:
Nice attitude you are showing there. Oh, there is plenty of power, let's waste.it! Really, that kind off attitude is definitely going to make the world a better place
What's more why do you think undervolting does influence the performance? It only influences the power consumtion and if you go too far it does render the phone unstable. But it certainly does not in-, or decrease the cpu's performance.
Sent from my revived Galaxy Note
---------- Post added at 01:50 AM ---------- Previous post was at 01:45 AM ----------
Yep tegrak definitely does the trick with PhilZ kernels. I have been using it for at least 8 months now and my phone is undervolted too. Only the highest cpu state is overvolted because I overclocked it to 1552 MHz instead of 1400.
Sent from my revived Galaxy Note
Click to expand...
Click to collapse
Please explain why you overvolted AND overclocked the highest cpu state. Doesn't this shorten your batteries performance?
Did you changed cpu governor or something else (like screen off profile to reduce CPU) to achieve 1% battery loss at 3pm?
And was that with mobile data on?
jcbobeda said:
Please explain why you overvolted AND overclocked the highest cpu state. Doesn't this shorten your batteries performance?
Click to expand...
Click to collapse
I overcloked the highest cpu state from 1400 Mhz to 1552 Mhz because I want more performance. And because my phone became unstable with the 1552 Mhz and the standard voltage. So now my phone saves energy when the lower cpu states are active and it has a bit of extra power at the expense of battery life when it needs the most processing power. All in all that gives me better battery life than with stock settings and a snappier device when needed. For me this is the ideal solution.
Sent from my revived Galaxy Note
Hi everybody
I have use Nexus 4 for long time....and i get problem with Asphalt 8....when i play this game with stock rom it's no lag and very smooth....but when i try it with another rom like carbon, mahdi, cm11,...i always get some lag....i try some kernel hells core, hells doctor, experimental and set ondemand + noop + max 1.5Ghz + min 384Mhz and nothing change....can anybody tell me why and how to fix it ??? I love this game
tuandark said:
Hi everybody
I have use Nexus 4 for long time....and i get problem with Asphalt 8....when i play this game with stock rom it's no lag and very smooth....but when i try it with another rom like carbon, mahdi, cm11,...i always get some lag....i try some kernel hells core, hells doctor, experimental and set ondemand + noop + max 1.5Ghz + min 384Mhz and nothing change....can anybody tell me why and how to fix it ??? I love this game
Click to expand...
Click to collapse
use ROW, i think the problem here is the IO, dont use noop
C4SCA said:
use ROW, i think the problem here is the IO, dont use noop
Click to expand...
Click to collapse
so what governor is better ???
can u teach me how to set Governor, IO, UV for good battery life ???
tuandark said:
so what governor is better ???
can u teach me how to set Governor, IO, UV for good battery life ???
Click to expand...
Click to collapse
depending on the kernel u are using, u have different options.
to configure the kernel settings use any app like Trickster mod.
for battery life try to lower the max cpu frequency, u may undervolt a bit too but the most important is to choose a good governor that dont raise the cpu clock without any real need (keeping ur cpu a lower frequency == less heat and less voltage used == better battery life and somewhat better preformance ratio).
For IO: ROW, FIOPS or tweaked BFQ.
i recommend u to take a look at moob kernel (from @bedalus), and u will understand what i stated about UV not being the best way to save battery and produce less heat
I have a kernel for you to try http://forum.xda-developers.com/showpost.php?p=51373661&postcount=1199
I always appreciate help testing
Hey there,
Just to let you know that with bootloader unlocked + root (magisk) there is a nice set of tunable option with kernel adiutor. With a bit of entropy and governor tuning, you get even better performance from your a2. That's pretty cool ??
Can you share your settings? Hours of screen, performance... And kernel adiutor setup
RawKnighy said:
Can you share your settings? Hours of screen, performance... And kernel adiutor setup
Click to expand...
Click to collapse
disabled cpu boost to avoid cpu stuck at 2,2
Change governor to on demand
Entropy increase to get 40% free
Mostly it.
SOT depend on my use and vary between 4-5 hours to 6+ hours. This is mainly due to two factors:
-network coverage (this can suck your battery like nothing)
- use if BT + viperfx for hours ?
The best way to test it.. is to test it you may have the same increase as me (4 hours sit at most before mod)
Grüß,
H.
*stucked cpu ppl, please don't hate me, I had to wait to get something to be shown ??
Look at that sleep deepness ?
dodjob said:
*stucked cpu ppl, please don't hate me, I had to wait to get something to be shown ??
Look at that sleep deepness ?
Click to expand...
Click to collapse
You rooted your mi a2 right.so are you facing any issue after root?
Lol No, except that I installed a gcamera which wrecked my original camera.. after countless system flash it went but all ok. The ondemand thing is a real treat mate, and fast as hell ?
dodjob said:
*stucked cpu ppl, please don't hate me, I had to wait to get something to be shown ??
Look at that sleep deepness ?
Click to expand...
Click to collapse
Does the clock alarm work with such a deep sleep?
ILA said:
Does the clock alarm work with such a deep sleep?
Click to expand...
Click to collapse
Of course it does ?
Can I get the process of installation
I don't see any improvements with on demand actually. Interactive gives me 0.3%/h drain in deep sleep and I doubt it can get much better
Benjamin_L said:
I don't see any improvements with on demand actually. Interactive gives me 0.3%/h drain in deep sleep and I doubt it can get much better
Click to expand...
Click to collapse
On demand does not improvement battery life as soon as you keep cpu boost in cpu 1. Did you disabled it? For me it was night and day
Chaitanya Kumar said:
Can I get the process of installation
Click to expand...
Click to collapse
Unlock bootloader + root the phone and then just install an app called "Kernel auditor" from the Play store and tune the kernel from within the app.
dodjob said:
Hey there,
Just to let you know that with bootloader unlocked + root (magisk) there is a nice set of tunable option with kernel adiutor. With a bit of entropy and governor tuning, you get even better performance from your a2. That's pretty cool ??
Click to expand...
Click to collapse
Care share settings with screenshot?
dodjob said:
disabled cpu boost to avoid cpu stuck at 2,2
Change governor to on demand
Entropy increase to get 40% free
Mostly it.
SOT depend on my use and vary between 4-5 hours to 6+ hours. This is mainly due to two factors:
-network coverage (this can suck your battery like nothing)
- use if BT + viperfx for hours ?
The best way to test it.. is to test it you may have the same increase as me (4 hours sit at most before mod)
Grüß,
H.
Click to expand...
Click to collapse
Danke! Can you share your entropy settings, please!
e34v8 said:
Danke! Can you share your entropy settings, please!
Click to expand...
Click to collapse
?
wow, this deep sleep was awesome
Just install hex kernel... It's awesome
syncstar32 said:
Just install hex kernel... It's awesome
Click to expand...
Click to collapse
whats the advantages ?