help for unstable rom - Milestone 2 General

hi all i have a milestone2 a953 and i wrongly update my phone to this version
Retail Latin AmericanM2L_U6_4.5.2_51-27_R01_SIGNED_US1MILA2GBRETLAB125LA003.0R_STABLE45LAMILETRETLA_P005_A028_M001_HWp2a_Service1FF.sbf.gz)
then i discover that it is fully unstable that the phone hung up when i connect it to the PC to try to root it
and every time i restart it or shut it down it take so much time to get started that it have to restart many times in the MOTO logo then it start ,and many others problems
but the main i'm not able to root it that i can use bootstrap to install other room
so there is any solution to root it without pc (i try z4root,gingerbreak)
or to downgrade to a stable room or to install other room with any way
pleased help me

jakkokko said:
hi all i have a milestone2 a953 and i wrongly update my phone to this version
Retail Latin AmericanM2L_U6_4.5.2_51-27_R01_SIGNED_US1MILA2GBRETLAB125LA003.0R_STABLE45LAMILETRETLA_P005_A028_M001_HWp2a_Service1FF.sbf.gz)
then i discover that it is fully unstable that the phone hung up when i connect it to the PC to try to root it
and every time i restart it or shut it down it take so much time to get started that it have to restart many times in the MOTO logo then it start ,and many others problems
but the main i'm not able to root it that i can use bootstrap to install other room
so there is any solution to root it without pc (i try z4root,gingerbreak)
or to downgrade to a stable room or to install other room with any way
pleased help me
Click to expand...
Click to collapse
Maybe you can try and search the forum? http://forum.xda-developers.com/showthread.php?t=1750277

Lean946 said:
Maybe you can try and search the forum? http://forum.xda-developers.com/showthread.php?t=1750277
Click to expand...
Click to collapse
i so do search man befor post and i see that and try it but now there is update in the post you give it i try it and it resolve my problem and now i'm in cm10 thank very much man really thank you
that what was help me
Try this please:
Factory reset your phone
Flash stock firmware vía RSD Lite again
Turn off your phone
While pressing the X in the slider keyboard, power up the phone
You should get an android with a ! inside a triangle, press both volume side-buttons
Using the volume side-buttons go to wipe cache and press power button to select, confirm
Do the same for wipe data/factory reset
Turn on your phone normally
Enable usb debugging
Change usb mode to just charge
Erase all previous versions of this script from your pc
Download the latest version from this link: https://github.com/nicofff/preinstal...zipball/master
Extract it to your desktop
Plug in your phone
Run rootMM2.bat or rootMM2_en.bat both scripts are working, tested by me this morning
When the script pauses and tells you to flash the included fixed.sbf file, unplug your phone from the usb, turn it off and then press the power button while holding the up arrow key on the slider keyboard, you should be in bootloader mode, plug your phone again and open RSD Lite, it should detect your phone in the first row, flash the fixed.sbf included from the .zip downloaded *DO NOT CLOSE THE SCRIPT WINDOW*
Wait for the flash to finish completely, your phone should have rebooted and be on the home screen again, if motorola portal is activated by itself, then the RSD would say "PASS" and you can close it, if the moto portal is not activated and usb mode is still in "just charge" mode, then wait until RSD says "Please manually power up the phone" and CLOSE RSD
Check on your phone that usb mode is in "just charge" and usb debugging is enabled
Go back to the script window and press any key
Wait for script to finish
If you get any errors please paste the whole output here again, alternatively, try all the above steps again but with another stock firmware, such as Latam Retail, or Personal
I hope this time you can root!
I've done it several times with the original spanish script, and I flashed the stock firmware this morning just to test the translated one and it's working 100%

Related

[REQ] original Roms for XT720

Buddies,
can anyone upload the original roms for Milestone XT720? (SG, Kr, and other)
So we can do more testing worry free. If anything goes wrong, we can just flash it back to original. It would be nicer if someone can also show how to flash the rom.
------- Edit ---------
Flashing Guide by Hahutzy
Hahutzy said:
Alright, I just crashed my phone into an infinite FC loop by messing with system/app, so a reflash was in order.
Here's how I successfully flashed it back to stock using Windows 7 32bit (dense text ahead):
1) Search somewhere along the lines of "RSDLite - download here" on google
2) Go inside first link, download the file that's named somewhere along the lines of "RSDLite_4.5.3.zip"
3) Install it.
4) Go to http://and-developers.com/sbf:xt720
5) Download the 2nd Full Flash rom, the one where the provider is "Southeast Asia"
6) Unzip that file, you now have a .sbf folder (not file)
7) Put that .sbf folder in C:\Users\Admin\My Documents
8) Shut down phone, take out battery
9) Hold Power + Volume Down + Camera buttons all at once
10) Put in the battery while holding those buttons
11) Phone is now in bootloader mode (screen looks like a command prompt)
12) Release the buttons, and plug USB to computer and phone
13) Open RSD Lite, your phone should be detected as connected (Device name was like "S OMAP 3440" or some BS like that)
14) Click "..." to browse for the .sbf file in C:\Users\Admin\My Documents
15) In RSD Lite, click to highlight your connected XT720, and then click "Start". The first column beside the connected phone should now have a green icon thing, and the ROM is being flashed.
16) DO NOT TOUCH YOUR PHONE, THE CABLE, OR THE COMPUTER! (I went and took a dump)
17) When the "Status" column in RSD Lite says "Please manually power up this phone", so shut it down and power it again. Note: The status stays in "Checksum Group 37" for a verrrrryyyy long time before saying "Rebooting". I thought it got stuck there, but it ended up ok.
18) Your XT720 is now reflashed to stock.
19) You can now close RSD Lite. It will complain saying you will damage the attached device, but I pulled it out wayyyy before this (I unhooked it when it told me to reboot manually) and my XT720 is not dead. You may choose to close RSD Lite before unhooking your XT720.
20) Post your results in this thread and confirm or reject my procedure.
spiderx_mm, you may quote this on your first post for others' easy access to this procedure if you so wish to.
Click to expand...
Click to collapse
I agree on this, i need a EU rom.
i am using an SG xt720. is there anyway to dump the rom?
@mariomsg1, i remember u have reflashed ur rom once before right? may i know where did u get the sg starhub rom last time? could u share it please. thanks
http://and-developers.com/sbf:xt720
xt720 said:
http://and-developers.com/sbf:xt720
Click to expand...
Click to collapse
yes, that is
there latest ROM is STR_U2_01.18.2
mine is STR_U2_02.18.3 (bought unlocked retail version from expansys europe)
anybody got same unrooted ROM? Mine has problems, I am stuck with ROOT which stopped working after couple of days, and now I can neither un-root, nor root again.
mariomsg1 said:
I agree on this, i need a EU rom.
Click to expand...
Click to collapse
can u share a step-by-step flash guide?
U can flash with RSDlite. just need a sbf file.
okie. any version do u recommend? or shall i just use the latest version?
Yes
Sent from my Milestone XT720
Sorry, can i know how to put the phone into bootloader mode? I cant not find in google and this forum for xt720.
press volume and power together
can not go to boot loader. Already press power and volume button
first you need to switch off the phone, then press camera button and power and keep those pressed until recovery icon appears. THEN press volume up and power, if I remember this correctly.
solnyshok said:
first you need to switch off the phone, then press camera button and power and keep those pressed until recovery icon appears. THEN press volume up and power, if I remember this correctly.
Click to expand...
Click to collapse
press play button and power, then press volume up and camera button
play button = small button next to the camera shutter
please help
When i do the guide, phone at first go to recovery mode, and nothing happen. RSD lite can not recognize the phone. I use recovery mode to wipe cache and data like it said factory reset. Then i get stuck. Phone can not start up, stand at motorola logo.
I still can go to recovery mode, but not boot loader mode. And it appear error in recovery mode: E:\ can't open /cache/recovery/command. Now how can i repair my phone?
flash sbf file with rsd lite on bootloader mode
Sorry i cannot put the phone to bootloader mode. It get stuck at recovery mode when i press vol up and camera. And computer did not regconize the phone also. I guess that i still missed the way to go to boot loader. Can you please do a step by step guide? What kind of windows you use?
mariomsg1 said:
flash sbf file with rsd lite on bootloader mode
Click to expand...
Click to collapse
civi309 said:
Sorry i cannot put the phone to bootloader mode. It get stuck at recovery mode when i press vol up and camera. And computer did not regconize the phone also. I guess that i still missed the way to go to boot loader. Can you please do a step by step guide? What kind of windows you use?
Click to expand...
Click to collapse
go to flashing mode directly by pressing volume up+camera button+power button. after that just flash the sbf in provided the windows can see ur phone. make sure u also install the required driver

[TUT][i9001] HOW TO UNBRICK YOUR SOFTBRICKED I9001

Soft bricking often happens in when you try to install a ROM which is not optimized for your phone e.g:Installing i9100 SII ROM on your i9001.
Here is a basic tutorial on how to unbrick a i9001.
Requirements:
For unbricking your phone you are going to need these:
1.An official Samsung firmware
2.ODIN downloader
3.AriesVE.ops for ODIN usage.
4.USB cable
5.Samsung KIES drivers installed
6.Patience!!!
OK.first of all you need to check things above and make sure you have them all.
Fortunately when your phone is soft bricked(when soft bricked your phone doesn't boot into the OS And instead of that you'll see picture of a phone connected to a computer and on the connection line there's a warning sign) can get yo the download mode. So first get your phone in download mode by pressing this button combination: volume down+ home key+ power button
So then get set to use ODIN.
Connect your phone to the PC and make sure you have installed drivers and also killed every KIES process.(If you have done well till now you can see one black gets yellow and in Terminal you'll see 2 lines "detected","added") So start ODIN and place AriesVE.ops as the ops file then use your official firmware (extension should be like this |..... .tar.md5|).To get your firmware working tick "one package" and place you "MD5" file in "one package" location. Then after MD5 checking start the process and go grab a beer.
Wait about 7 to 10 minutes to see PASS on the block.
Then your phone would automatically reboot into your android OS. Then you can start rooting, Tweaking and other stuff again.
At least one you have your phone and your warranty back.
FAQs:
1.my phone gets stuck at setup connection. what should I do?
Chill out! Don't panic! Simply remove your battery for 10 seconds then do these things all again and proceed!
2.my phone boot loops what do I do?
Simply reboot your phone in the Recovery mode "volume down+ power" and wipe cache/dalvik cache if you can.
(Once I installed FOTA from stock recovery and that worked for me)(I suggest you install the official TWRP recovery from SDcard to have more options)
3.you tell me your questions!I'll edit the topic later!
At last feel free to ask any dumb question. Dumb questions are muck more valuable than dumb mistakes!
Please hit thanks button if I helped you out!
Sent from my GT-I9001 using xda premium

[ROOT] I can't root my GN3

Hi
For the beginning i want to say thx to the people who will try help me.
Samsung Note 3 SM-9005
Rom: NB3 4.4.2 (kitkat)
I should post it as a reply to the chainfire's post on cf auto root but i can't cause i am a new on xda (and he didn't allow me )
So what is my problem ?
When i tried root with CF all is ok but when odin say 'PASS' there is no recovery boot (the install process, the red android logo)
What i have ? > After my flash my phone try to boot (with Se Enforcing + 2 other stuff blue red and yellow i guess) but my phone can't boot (yes even boot) he only reset and try re-booting.
chainfire's say
*NOTE: Sometimes the device does *not* boot into recovery mode and root your device. Just do the entire procedure again if this happens. If it still will not install root and such, make sure that in Odin "Auto Reboot" is not checked. Then after flashing, pull the battery, and boot with VolUp+Home+Power button to boot into recovery manually. This will start the install process.*
Click to expand...
Click to collapse
So i tried it, i unchecked the auto-boot, flash my phone pull the battery and press the button (without the battery), and after my phone turn off.
When i turn on >> same issue boot loop all time
And to have access on the phone i must go on the downlaod mode and click restard phone...
Well if u could help me .... 90% of my app require root x) :laugh:
Is this the file you used? There's 2 files, one for 4.4 and the other for 4.3. Try flashing the file again.
Yes i used this file
i forgot to say that kingo root is so buged i mean i try also to root with him (on 1s)
He put my phone on download, install the recovery ect
Result: a fake root, in fact even if i have SuperSU (he installed) He said me that i have no binnary installed
I also checked on "Root Checked" no root here
BUT on download mode: custom os + custom binnary
And his chinese recovery work
1 hour ago i used my GN2 to see if maybe it's my computed who have issue with kingo root
Result: Root perfectly my phone
I also forgot to say that i used different odin (1.85,3.09 ect) on admin
And i tried the NA6's rom (maybe was the rom ^^' but nop still no root)
French's user said:
Hi
So i tried it, i unchecked the auto-boot, flash my phone pull the battery and press the button (without the battery), and after my phone turn off.
When i turn on >> same issue boot loop all time
And to have access on the phone i must go on the downlaod mode and click restard phone...
Well if u could help me .... 90% of my app require root x) :laugh:
Click to expand...
Click to collapse
I re-read your reply and I'm a little confused. Did you pressed all buttons after removing the battery? Also, there is no restart phone in download mode, you can only get out of download mode by pressing power button for a few seconds or remove the battery.
Lastly, maybe check you have the correct samsung usb drivers and reactivation lock is off.
hey_joe said:
I re-read your reply and I'm a little confused. Did you pressed all buttons after removing the battery? Also, there is no restart phone in download mode, you can only get out of download mode by pressing power button for a few seconds or remove the battery.
Lastly, maybe check you have the correct samsung usb drivers and reactivation lock is off.
Click to expand...
Click to collapse
Well i know but i didn't even really understand the process to manually boot the recovery (the chainfire's quote)
what i did ? i flash my phone when odin say "reset" i just pull the battery on the table and next press buttons (Volup+home+power)
My phone turn off i replace the battery and i get the booting loop
Maybe my way to process is wrong, i don't even know chainfire don't really explain in details the way to do it....
For the driver i deleted all and re-installed by kingo but in fact all time my device is detected (in all mode) and COM if alway here (also the flash is correct)
I think maybe my process is badly done (maybe i can't understand cause im french)
Here's how I would normally do it.
- download the file and extract to a folder/location of choice
- put phone in download mode by pressing power + vol down + home button all at the same time until something comes up on the screen then let go of the buttons then press vol up then connect to usb on pc
- go to where you extracted the downloaded file, open odin and put the tar.md5 file in the PDA slot and click start
Odin will flash file and automatically restart to apply root ( red android with red letters ) then restart again to android.
OMG dude that work thx to you :laugh::laugh::laugh::laugh::laugh::laugh:
Ok the last post i mean i didn't understand the process of the boot recovery manually (with autoboot unchecked)
But i least this time i used a different thing- what ?- A nokia usb cable
And this time that work and im sure before i did all u said to me.
I worked on 2 night x)x)
Anyway dude thx to help me
No problem.
Enjoy your phone :good:

[Q] Please can someone help I killed my yotaphone 2

Hello to all here at xda im a new member and im hoping someone can help me,
I recently bought a yotaphone 2 from tinydeals in china and its model
P05-Yota which I think is china model YD-205 or 206
I wanted to upgrade the firmware to the latest firmware and I think I made two big mistakes.
First when I downloaded the yotaflasher software for windows I chose the eu firmware on option 2 and clicked to download it.also I dont think I put usb debugging on my phone.i put my phone into diwnloading mode and connected the phone to my pc.my pc recognised the phone and I clicked on option 1 in yotaflasher to flash mobile.
The flash process started but failed on most of the things it was supposes to get access to, my phone reatarted and now its on constant boot loop which shows the android logo.i can boot phone back into downloading mode but nothink else
I have read that as my phone is in boot loop and can still boot into downloading mode its soft bricked and not hard bricked so im guessing thats good news.
This is my own fault and im not very experienced in all this flashing and I fing yotaflasher hard to understand compared to odin ive used on samsung phones before
Please can anyone help a complete novice to revive his mobile
I would be greatful for any help and instructions and dont know if im allowed to do this on this site so I appologise to moderators if im not, but anyone that can help me get my phone working again I will transfer £20 to their paypal account as I would appreciate this help alot
Im sorry for being a noob and hope to hear from someone soon
Thx
Simon h
Sorry for my very, very bad english.
Try to reboot your phone in recovery mode.
Press power button for a long time (20 - 30 seconds or more) and, as soon as the screen turn off, press and hold the Volume Up + Power button simultaneously for about 10 seconds. Then, choose wipe data and factory reset.
Try several times if that does not work at once.
I made a big mistaske too and I solved the problem but with several attemps.
Good luck !
I appreciate your help
cheynei said:
Sorry for my very, very bad english.
Try to reboot your phone in recovery mode.
Press power button for a long time (20 - 30 seconds or more) and, as soon as the screen turn off, press and hold the Volume Up + Power button simultaneously for about 10 seconds. Then, choose wipe data and factory reset.
Try several times if that does not work at once.
I made a big mistaske too and I solved the problem but with several attemps.
y
Good luck !
Click to expand...
Click to collapse
Just wanted to saythanykyou and appreciate your reply and as soon as I get home I will try and boot into recovery and see how that goes.will update on progress
Again thankyou
simon121simon said:
Just wanted to saythanykyou and appreciate your reply and as soon as I get home I will try and boot into recovery and see how that goes.will update on progress
Again thankyou
Click to expand...
Click to collapse
No problem, I think it's the only solution... but you will loose all your data (I bought my yotaphone from tinydeals too and I killed it too)...
:fingers-crossed:
queation about yotaflasher
cheynei said:
No problem, I think it's the only solution... but you will loose all your data (I aboutbought my yotaphone from tinydeals too and I killed it too)...
:fingers-crossed:
Click to expand...
Click to collapse
Just a quick question, yotaflasher is a software im not familiar with and im not sure if im using it right.
Do I start yotaflasher and then type 2 and enter tochoose region.then type the number for the firmware I want and press enter.then when its finished downloading it seems ro freeze and I cant type any key to start flash so I have to exit software then restart it.
Do I then just type 1 and enter to start flashing phone then thats it or do you have to type proper commands into this software ro get it to work as im not sure if im using it right
I will be home in couple of hrs to test out what you told me
Thx
simon121simon said:
Just a quick question, yotaflasher is a software im not familiar with and im not sure if im using it right.
Do I start yotaflasher and then type 2 and enter tochoose region.then type the number for the firmware I want and press enter.then when its finished downloading it seems ro freeze and I cant type any key to start flash so I have to exit software then restart it.
Do I then just type 1 and enter to start flashing phone then thats it or do you have to type proper commands into this software ro get it to work as im not sure if im using it right
I will be home in couple of hrs to test out what you told me
Thx
Click to expand...
Click to collapse
Sorry again for my english...
1. without any software, reset your phone : turn off your phone (or, if it's not possible, press power button for a long time :20 - 30 seconds or more - and, as soon as the screen turn off) --> press and hold the Volume Up + Power button simultaneously for about 10 seconds. Then, choose "wipe data and factory reset" and wait...
2. After the reboot, put usb debugging on your phone
3 . install yotaflasher (so you also have the drivers on your computer).
4. put your phone on download mode : turn off your phone - then, press and hold the Volume down + Power button simultaneously for about 10 seconds
5. open yotaflasher on your computer and connect your phone (wich is on download mode)
6. chose the last EU firmware (option 2) and download it - after, click on option 1 and flash your mobile. Wait the necessary time without touch anything and, after maybe 10 ou 15 minutes, your phone will reboot.
We have the same phone from Tinydeals and I'm now on lolipop (after the flash).
Good luck !
usb debugging is the problem
cheynei said:
Sorry again for my english...
1. without any software, reset your phone : turn off your phone (or, if it's not possible, press power button for a long time :20 - 30 seconds or more - and, as soon as the screen turn off) --> press and hold the Volume Up + Power button simultaneously for about 10 seconds. Then, choose "wipe data and factory reset" and wait...
2. After the reboot, put usb debugging on your phone
3 . install yotaflasher (so you also have the drivers on your computer).
4. put your phone on download mode : turn off your phone - then, press and hold the Volume down + Power button simultaneously for about 10 seconds
5. open yotaflasher on your computer and connect your phone (wich is on download mode)
6. chose the last EU firmware (option 2) and download it - after, click on option 1 and flash your mobile. Wait the necessary time without touch anything and, after maybe 10 ou 15 minutes, your phone will reboot.
We have the same phone from Tinydeals and I'm now on lolipop (after the flash).
Good luck !
Click to expand...
Click to collapse
Hi there mate thx for the step by step guide but I think I know what the problem is.i originally didnt put it into usb debugging mode when I originally tried to flash the firmware.now as the mobile is stuck in boot loop and cant load up as normal I cant switch on usb debugging.is there a way through fastboot or that adb program.im just learning about these programs to flash mobiles with but if there is no way to enable usb debugging through any software I fear im screwed
simon121simon said:
Hi there mate thx for the step by step guide but I think I know what the problem is.i originally didnt put it into usb debugging mode when I originally tried to flash the firmware.now as the mobile is stuck in boot loop and cant load up as normal I cant switch on usb debugging.is there a way through fastboot or that adb program.im just learning about these programs to flash mobiles with but if there is no way to enable usb debugging through any software I fear im screwed
Click to expand...
Click to collapse
Yes, I know, don't worry, I bug my phone too - it's why you have, first, to reset your phone... try to put it on recovery mode, it's the only solution (I think).
--> Press the power button for a long time (20 - 30 seconds or more) and, as soon as the screen turn off, press and hold the Volume Up + Power button simultaneously for about 10 seconds. Then, you will see a menu : choose "wipe data and factory reset".
Try several times if that does not work at once.

Nokia 6 Oreo Beta - No recovery!

Ever since i flashed my Nokia 6 with the Oreo Beta update i no longer have access to the recovery menu.
I want to update to Oreo Final, but how can i do that now?
My Nokia is a TA-1000 model, but recognized as TA-1025.
IndigoHD said:
Ever since i flashed my Nokia 6 with the Oreo Beta update i no longer have access to the recovery menu.
I want to update to Oreo Final, but how can i do that now?
My Nokia is a TA-1000 model, but recognized as TA-1025.
Click to expand...
Click to collapse
There is 2 way to access recovery menu:
Normal Way:
Step 1) Turn the power off.
Step 2) Hold and Press Volume up + Power Button for about 10 second and release
Step 3) If you see Nokia logo it means failed repeat step 2
Step 4) If you see no command Android logo it means success
Step 5) In no command Android logo Press Volume up + Power Button + Home Button(Center One)
Step 6) You will see recovery menu
Developer Way:
Step 1) In the System->About Phone Tap Build Number Multiple Time to enable developer mode
Step 2) In Developer options enable usb debugging
Step 3) Connect your phone to computer using usb and Allow the access.
Step 4) Download sdk tools from developer.android.com
Step 5) Open adb by cmd and type "adb devices" to detect your phone
Step 6) Then type "adb reboot recovery" to force your phone to reboot and open recovery
Step 7) You should get no command Android logo
Step 8) In no command Android logo Press Volume up + Power Button + Home Button(Center One)
Step 9) You will see recovery menu
IndigoHD said:
Ever since i flashed my Nokia 6 with the Oreo Beta update i no longer have access to the recovery menu.
I want to update to Oreo Final, but how can i do that now?
My Nokia is a TA-1000 model, but recognized as TA-1025.
Click to expand...
Click to collapse
Reflash the mena firmware and wait if you receive otas. If not, you could flash the zip for final oreo. However, I think there's not the link for ta-1025 yet.
Gonz19 said:
Reflash the mena firmware and wait if you receive otas. If not, you could flash the zip for final oreo. However, I think there's not the link for ta-1025 yet.
Click to expand...
Click to collapse
Every zip work on TA-1025/and MENA firmware
Because, internally mena firmware is also TA-1025 and all OTA zips are made and targeted to TA-1025 varient only
So you can even flash OREO FINAL VERSION ALSO
Hit thanks button if you find this useful
Happy flashing
Tried flashing Oreo Final after finding the recovery, now my phone is broken.
Flashing didnt finish and it would no longer boot.
Tried restoring to an older firmware with OST LA, now it just flickers all the time.
Sometimes i see the recovery screen, but then it flickers off again.
Cant do anything anymore. Its broken.
IndigoHD said:
Tried flashing Oreo Final after finding the recovery, now my phone is broken.
Flashing didnt finish and it would no longer boot.
Tried restoring to an older firmware with OST LA, now it just flickers all the time.
Sometimes i see the recovery screen, but then it flickers off again.
Cant do anything anymore. Its broken.
Click to expand...
Click to collapse
Hey dont be sad , we are here to assist you
Try installing OTA manually
when u see the recovery menu, move to the OTA folder and install
Install till January, and then try the OTA of OFFICIAL OREO
this might work, you need to have patience and quick to install the OTA
if I would be there with you, I would love to help you
sltushar said:
Hey dont be sad , we are here to assist you
Try installing OTA manually
when u see the recovery menu, move to the OTA folder and install
Install till January, and then try the OTA of OFFICIAL OREO
this might work, you need to have patience and quick to install the OTA
if I would be there with you, I would love to help you
Click to expand...
Click to collapse
Tried it. Phone just keeps flickering. No longer reacts to anything i do and i cant use the recovery at all. Most of the time the screen is black then it suddenly flashes the recovery for a second.
Cant input any button commands and cant chose anything there.
IndigoHD said:
Tried it. Phone just keeps flickering. No longer reacts to anything i do and i cant use the recovery at all. Most of the time the screen is black then it suddenly flashes the recovery for a second.
Cant input any button commands and cant chose anything there.
Click to expand...
Click to collapse
Can you do one thing,
Its okay it flickers
Try this
When you think you are in recovery mode but still cant see
Then
Just press volume down 4 time(not so quickly, you should know that you pressed it 4 times)
Then click power button
Click one time volume down button
Then again power button
After 20 second press power button
Wait for to reboot the device, if it doesn't
Try force rebooting
Hope this work:fingers-crossed:
sltushar said:
Can you do one thing,
Its okay it flickers
Try this
When you think you are in recovery mode but still cant see
Then
Just press volume down 4 time(not so quickly, you should know that you pressed it 4 times)
Then click power button
Click one time volume down button
Then again power button
After 20 second press power button
Wait for to reboot the device, if it doesn't
Try force rebooting
Hope this work:fingers-crossed:
Click to expand...
Click to collapse
Doesnt work. Forcing a reboot doesnt work either.
Soft reboot works, but i cant get into download mode this way.
IndigoHD said:
Doesnt work. Forcing a reboot doesnt work either.
Soft reboot works, but i cant get into download mode this way.
Click to expand...
Click to collapse
These steps are for hard reset not for download mode
Well i have one solution for you, but its lil expensive
I have firmware, which can be installed through infinity CM2 dongle
This dongle can upgrade, downgrade and do much things on Nokia devices
It costs 70 US dollar
This can only work for you, cause Nokia care will replace your motherboard, they wont repair it, because even they don't know how to deal with it
So if you can buy this dongle then you can flash it else wait for OFFICIAL OREO firmware to be come soon
sltushar said:
These steps are for hard reset not for download mode
Well i have one solution for you, but its lil expensive
I have firmware, which can be installed through infinity CM2 dongle
This dongle can upgrade, downgrade and do much things on Nokia devices
It costs 70 US dollar
This can only work for you, cause Nokia care will replace your motherboard, they wont repair it, because even they don't know how to deal with it
So if you can buy this dongle then you can flash it else wait for OFFICIAL OREO firmware to be come soon
Click to expand...
Click to collapse
Thanks everyone for all your help and to you sltushar, especially!
I guess i will let it discharge for now and hope i can enter into download mode after that.
For now i will use my old phone.
IndigoHD said:
Thanks everyone for all your help and to you sltushar, especially!
I guess i will let it discharge for now and hope i can enter into download mode after that.
For now i will use my old phone.
Click to expand...
Click to collapse
Till don't be sad, we are here, finding solutions for you and mate like you
IndigoHD said:
Thanks everyone for all your help and to you sltushar, especially!
I guess i will let it discharge for now and hope i can enter into download mode after that.
For now i will use my old phone.
Click to expand...
Click to collapse
When phone is powered off, connect charger and keep pressing volume down +power button. It should take you straight to download mode.
I had exact problem and by coincidence today
Can u see the no cammand page of recovery.
If yes then try pressing both volume up and Power button together. Try again and again it must take you to recovery... If you land in recovery only for once you just have to select the reboot to bootloader option, so the download mode will open then.. then use OST
Im also having the same problem, after oreo stable update in my nokia 6 im not able get into recovery mode. Please someone help!
I'm discovered, that Windows 10 and USB 3.0/3.1 may cause problems with flashing using OST. If you can, use USB 2.0 ports and older Windows operating system (in my case - Windows 8.1). I also bricked my phone and my new notebook cannot communicate with my phone, after use OST using my older PC - it communicate without any problem
leszczu8023 said:
Im discovered, that Windows 10 and USB 3.0/3.1 may cause problems with flashing using OST. If you can, use USB 2.0 ports and older Windows operating system (in my case - Windows 8.1). I also bricked my phone and my new notebook cannot communicate with my phone, after use my older PC - it works without any problem
Click to expand...
Click to collapse
No need of older windows i have done it (today) on windows 10 (64bbit) with USB 3.0 port today.. and now i am typing this from my recoverd Nokia 6.
All you need is that your .NETFramework version 3.5 is enabled in windows and you install OST tool properly which includes all drivers.
Bdw my windows 10 is on Fall Creator update.
minhas729 said:
No need of older windows i have done it (today) on windows 10 (64bbit) with USB 3.0 port today.. and now i am typing this from my recoverd Nokia 6.
All you need is that your .NETFramework version 3.5 is enabled in windows and you install OST tool properly which includes all drivers.
Bdw my windows 10 is on Fall Creator update.
Click to expand...
Click to collapse
Idk, but maybe it depends by hardware and software configuration... I also installed OST with all frameworks included in package without any success. Phone starts flashing and... reboots into recovery mode after +/- 10% of flashing progress. But it's my own flash experience
And yep, I also using W10 Fall Creators Update (10.0.16299.192) x64
leszczu8023 said:
Idk, but maybe it depends by hardware and software configuration... I also installed OST with all frameworks included in package without any success. Phone starts flashing and... reboots into recovery mode after +/- 10% of flashing progress. But it's my own flash experience
And yep, I also using W10 Fall Creators Update (10.0.16299.192) x64
Click to expand...
Click to collapse
That reboot thing also occurred with me in first try... All you had to do is press Volume down and power till phone goes back to download mode. And just press next again
leszczu8023 said:
I'm discovered, that Windows 10 and USB 3.0/3.1 may cause problems with flashing using OST. If you can, use USB 2.0 ports and older Windows operating system (in my case - Windows 8.1). I also bricked my phone and my new notebook cannot communicate with my phone, after use OST using my older PC - it communicate without any problem
Click to expand...
Click to collapse
minhas729 said:
No need of older windows i have done it (today) on windows 10 (64bbit) with USB 3.0 port today.. and now i am typing this from my recoverd Nokia 6.
All you need is that your .NETFramework version 3.5 is enabled in windows and you install OST tool properly which includes all drivers.
Bdw my windows 10 is on Fall Creator update.
Click to expand...
Click to collapse
leszczu8023 said:
Idk, but maybe it depends by hardware and software configuration... I also installed OST with all frameworks included in package without any success. Phone starts flashing and... reboots into recovery mode after +/- 10% of flashing progress. But it's my own flash experience
And yep, I also using W10 Fall Creators Update (10.0.16299.192) x64
Click to expand...
Click to collapse
Exactly, @minhas729 even i did all the things from my windows 10 fall creator update and though windows 10 is the best OS to flash phones, it rarely ask for phone drivers or anything, everything is pre-installed and you can just go straight to flashing, automatically system updates downloads all required things automatically.
So no need to go back to the old windows OS to flash it. And also its true on the first go, the OST tool gives error and stuck to flashing splash....
All you need it try once again, second time it flashes successfully
minhas729 said:
That reboot thing also occurred with me in first try... All you had to do is press Volume down and power till phone goes back to download mode. And just press next again
Click to expand...
Click to collapse
Last night i installed oreo stable in my nokia 6 and i wanted to reset and clear cache partition, since i wanted a fresh start. And i tried to go to recovery mode and i was stuck at no command screen and i accidentally did a combination of " press and hold the power button then press the volume up button once". This took my phone to recovery mode from no command screen.

Categories

Resources