What is the best kernel in its terms? I know each kernel is good for something, but can you site which is which?
I'm planning to change, merruk has been a real pain in the butt. It keeps rebooting even though its only set to 834 mhZ. -____-"
And also any suggestion for a good rom? I wanted the resurecctionremix but its only for s2.
Ciao.
If you are not using cm7 then savies kernel is good
kurotsugi's kuro kernel is not bad too
for rom try hyperion or jellyblast v3
which rom are you using right now??
If you are using hyperion then random reboots may be due to high undervolting
go to system/etc/init.d and search for 00undervolt
if its not there then look for bacem_tweak
edit it using root explorer and change undervolt value to -100mV (or less eg -80mV) save and reboot.. Random reboots are fixed
I'm using Jellyblast v.3.0.4 on Merruks Kernel. Its rebooting every now and then.
pochic1996 said:
I'm using Jellyblast v.3.0.4 on Merruks Kernel. Its rebooting every now and then.
Click to expand...
Click to collapse
Keep max freq to 1.248Ghz and min freq to 312Mhz and change ur governer to fix random reboots.
samir basnet said:
Keep max freq to 1.248Ghz and min freq to 312Mhz and change ur governer to fix random reboots.
Click to expand...
Click to collapse
What governor do you recommend?
pochic1996 said:
What governor do you recommend?
Click to expand...
Click to collapse
For battery saving conservative and for performance activecats,bcm etc Plz press Thanks if i Helped u.
samir basnet said:
For battery saving conservative and for performance activecats,bcm etc Plz press Thanks if i Helped u.
Click to expand...
Click to collapse
Any advantages with savie kernel? I noticed your signature.
pochic1996 said:
Any advantages with savie kernel? I noticed your signature.
Click to expand...
Click to collapse
Yah it`s very stable(rock solid) ,smooth and battery friendly too.
samir basnet said:
Yah it`s very stable(rock solid) ,smooth and battery friendly too.
Click to expand...
Click to collapse
How about speed?
pochic1996 said:
How about speed?
Click to expand...
Click to collapse
It`s fast too but is not overclocked.
MT only !
only Merruk MT kernels can deliver 100% performance and sophistication.
many other kernels are so poorly documented they give everyone a pain in the lower back :silly:
But Merruk kernel gas rebooting and Wakelock problems. I used it for some some days then changed.
Sent from my GT-S5360 using xda premium
maxxinn said:
But Merruk kernel gas rebooting and Wakelock problems. I used it for some some days then changed.
Sent from my GT-S5360 using xda premium
Click to expand...
Click to collapse
yeah, same too me.
Now i use Whitexp Kernel 1.3.3
Merruk kernel is great.But its for experts (hehe)
Savie is stable (im using it on hyperion, but boot is slow)
kuro just right (stable, and it has all you need)
white xp fast (tried it, it has fast card read)
MY OPINION
Related
How do I go ahead and full set up overclocking? I tried one ROM, and installed G3Mod Extreme. Nothing seemed changed so I found a overclock app in the market and set it to 1200Mhz but then the phone crashes each time. And whatever I set it to it did not seem any faster and default was 600. Help would be loved.
G3mod extreme is not for someone who is mosly a beginer with OC the phone. Use g3mod performance or ultimate and setcpu for changing the frequency.
To do this do I also need a OC version of a rom like Kyrillos Rom OC version?
I think u only require OC kernel coz when i used indroid i had to use an overclockable kernel to be able to overclock it.
Which Kernel and what frequency?
Am a lil too confused as to which kernel do i flash.. There are so many kernels out thr now which are already overclocked.. An wen i flash an overclocked kernel, my phone doesn't boot at all.. So first I hav to flash a non over clocked kernel.. And then overclock it..
Can u guys pls suggest me some good kernel to do this..
And also.. Pls tell me to what frequencies do i have to set in SET CPU and in what profile...
Thank u
osbozzy said:
Am a lil too confused as to which kernel do i flash.. There are so many kernels out thr now which are already overclocked.. An wen i flash an overclocked kernel, my phone doesn't boot at all.. So first I hav to flash a non over clocked kernel.. And then overclock it..
Can u guys pls suggest me some good kernel to do this..
And also.. Pls tell me to what frequencies do i have to set in SET CPU and in what profile...
Thank u
Click to expand...
Click to collapse
same problem... cant boot since i have flashed g3mod ultimate.. plzzz suggest
Try putting your phone into recovery mode and having a mess about there. Possibly do a data wipe.
sent from modded samsung gt-i5800 using xda app
please read all the great threads about flashing, kernels, roms, ... here in the forum - all your questions are answered - just search
Can any body tell me what I/O scedular in the settings for no frills overclocking app means it says I/O scheduler and the options are bfq, cfq or none
sent from modded samsung gt-i5800 using xda app
bizjoya said:
same problem... cant boot since i have flashed g3mod ultimate.. plzzz suggest
Click to expand...
Click to collapse
i have flashed the same kernel on non oc kyriloss:7.1...runs very good....never better....
i read somewhere on this
forum that you have to untick in setcpu set on boot before flasing kernel
Sent from my GT-I5800
I did the same and got stuck in a boot loop. I went into recovery mode and cleared all caches and partitions the reboot. It then booted fine. Then i unticked the set on boot
sent from modded samsung gt-i5800 using xda app
Hey guys,i have gingerDX v19 but i don't know how to overclock my XPERIA?
Help me pls
you may instal alfs kernel he has oc built in
Download modules...put in sys or istal via adb...
Sent from my X8 using XDA App
Like Norbula said, flash yourself another kernel to your lovely X8 which has an OC module in it and you're good to go
my fon with alfs kernel has new life
norbula2008 said:
you may instal alfs kernel he has oc built in
Click to expand...
Click to collapse
+1
This kernel have best overclock for X8
there is new v04 with oc 787 max
unlock your bootloader then OC with alfs kernel
marko93 said:
Hey guys,i have gingerDX v19 but i don't know how to overclock my XPERIA?
Help me pls
Click to expand...
Click to collapse
You might want to look at THIS
You can overclock your phone in Cyanogenmod settnings
Sent from my X8 using Tapatalk
Yes, but you must have the OC module or an OC kernel installed for doing this.
cool i can oc my phone to 768.. still no problem until now..
Sent from my X8 using XDA App
use modelu overclocked
codfreak said:
Yes, but you must have the OC module or an OC kernel installed for doing this.
Click to expand...
Click to collapse
Hello sry for intervening i didnt want to open a new thread
so i have mini 2.1.8,nAa 10, but after i set the cpu freq to 652 mhz i get massive screencuts can u help?(i have followed the instructions at doixahnn thread step by step)can u help???
gagagio said:
Hello sry for intervening i didnt want to open a new thread
so i have mini 2.1.8,nAa 10, but after i set the cpu freq to 652 mhz i get massive screencuts can u help?(i have followed the instructions at doixahnn thread step by step)can u help???
Click to expand...
Click to collapse
Set governor to smartassV2 before you start overclocking. It might help.
Sent from my E15i using XDA App
The name tells everything. This thread will help you to find the best ROM and Kernel if you're looking for pure performance. The best scores will be listed in the second post.
Post your whole setup you're running and screenshots of the scores.
Antutu and Quadrant scores would be great.
Please list the:
-ROM you're running
-Kernel
-CPU frequency
-I/O scheduler
-
So it's time for me to post my own scores:
Setup:
-Omega 6.0
-Siyah 1.2.6
-1700mHz
-VR
Current top scores from Sak500
Setup: Blackstar V2 ROM with Perseus kernel
-Omega 6.0
-Siyah 1.2.6
-1704mHz
-noop
Currently on perseus kernel @ 1800mhz
Blackstar v2 ROM
Please can anybody post their stock firmware benchmark results. I am getting very low results in the ranges between 8000 to 9000.
Stoc
k firmware
Sent from my GT-I9300 using xda premium
sak500 said:
Currently on perseus kernel @ 1800mhz
Blackstar v2 ROM
Click to expand...
Click to collapse
Man you're lucky to be able to OC your S3 to 1800mhz.
I can't even OC it to 1800mhz at 1475mV without it restarting.
mine on stock
@rajverrock maybe u get that results bcuz ur running the benchmark with power saving mode enabled
Stock XXALF6
Sent from my GT-I9300 using xda premium
Sent from my GT-I9300 using Tapatalk 2
danielmm88 said:
Man you're lucky to be able to OC your S3 to 1800mhz.
I can't even OC it to 1800mhz at 1475mV without it restarting.
Click to expand...
Click to collapse
What's ur rom and kernel? I've had problem with siyah and other kernels so have stayed with perseus.
Stock LF1 with all the VodaFone bloatware but S-Voice disabled.
sak500 said:
What's ur rom and kernel? I've had problem with siyah and other kernels so have stayed with perseus.
Click to expand...
Click to collapse
I posted my results a few posts above yours
Siyah 1.2.6 and Omega 6.0
im using aokp rom with siyah kernal
im running at 1700ghz
tried 1800ghz already but it just seems to reboot
Diaze said:
mine on stock
@rajverrock maybe u get that results bcuz ur running the benchmark with power saving mode enabled
Click to expand...
Click to collapse
Friend I have checked that my power saving mode is disabled and still i am getting the same results. And also my Antutu tells that my S3 runs on ArmV7 with triple core. Is this a bug or really my phone has triple core not a quadcore? Can anybody confirm it? Thanks for your help friends.
Can you add what the highest score holder is running to the second post. This way we dont have to search through the pages to find out.
In this case its easy while the number of pages is low but to help going forward.
Edit: Also does it make sense to have a quad core high bench as well as a dual core??
Love the post, thanks.
sak500 said:
What's ur rom and kernel? I've had problem with siyah and other kernels so have stayed with perseus.
Click to expand...
Click to collapse
Im using omega 7 fresh wipe installed and siyah 1.2.6 but the maximum Im getting is 5900, do you use oc and extewaks if what are your settings?
I uploaded this video on my YouTube channel.
c903jerk said:
I uploaded this video on my YouTube channel.
Click to expand...
Click to collapse
Nothing there.....
audino said:
Im using omega 7 fresh wipe installed and siyah 1.2.6 but the maximum Im getting is 5900, do you use oc and extewaks if what are your settings?
Click to expand...
Click to collapse
As mentioned above i've o/c'd the phone to 1800mhz. That's how the score is high. Also i dont know if siyah is good for o/c but perseus and nimpahatimine are good kernels.
Let's say I'm creating a rom for myself (only for myself ) and I wanna know which kernel is best so far in need of battery and performance? Which is compatible with almost all roms?
Sent from CYBERTRON!!
every1 have their own choice so its difficult to say which 1 is better if u want to know its good if u test yourself by the way i like the savie kernel
try...
Savie kernel
Thanks mate... first I will try savie's kernel, then I will try remaining...
Sent from CYBERTRON!!
if you are a poweruser,
and uses adb hard root # use white's kernel
if you are a average user who wants a good battery life,
go with kuro or savie
Try Koneu with performance conservative.....
"Addicted to XDA more then facebook.....lol"
deathnotice01 said:
if you are a poweruser,
and uses adb hard root # use white's kernel
if you are a average user who wants a good battery life,
go with kuro or savie
Click to expand...
Click to collapse
Thanks mate... I will try the normal one... because I'm not a power user
Sent from CYBERTRON!!
Gauravdgamer said:
Try Koneu with performance conservative.....
"Addicted to XDA more then facebook.....lol"
Click to expand...
Click to collapse
Koneu?? Where can I get it?
Sent from CYBERTRON!!
kuro is the one of the best kernel so far
leviz06 said:
kuro is the one of the best kernel so far
Click to expand...
Click to collapse
Thanks mate... I will try it...
Sent from my GT-S5360 using xda app-developers app
emjimadhu said:
Koneu?? Where can I get it?
Sent from CYBERTRON!!
Click to expand...
Click to collapse
yeah tried them all and if you want battery and performance then Koneu by marcotoo is best till now for me.... Search Dev section for it
Btw wait for Merruk 2.5
"Addicted to XDA more then facebook.....lol"
Gauravdgamer said:
yeah tried them all and if you want battery and performance then Koneu by marcotoo is best till now for me.... Search Dev section for it
Btw wait for Merruk 2.5
"Addicted to XDA more then facebook.....lol"
Click to expand...
Click to collapse
Oh thanks mate!!! :angel:
Sent from CYBERTRON with Swype ! !
I am using Merruk Technology Kernel 2.5 Deluxe with JellyBlast v3.0.2 Custom ROM....I have Link2SD installed..My phone keeps rebooting every 10-15 mins...Please help me in this case~
Ritayan Roy said:
I am using Merruk Technology Kernel 2.5 Deluxe with JellyBlast v3.0.2 Custom ROM....I have Link2SD installed..My phone keeps rebooting every 10-15 mins...Please help me in this case~
Click to expand...
Click to collapse
Keep ur min freq at 832mhz or 624...
Don't go below that or u will experience random reboots.....
Sent from my GT-S5360 using xda app-developers app
anmolsharma1293 said:
Keep ur min freq at 832mhz or 624...
Don't go below that or u will experience random reboots.....
Sent from my GT-S5360 using xda app-developers app
Click to expand...
Click to collapse
i've used this kernel before for 3-weeks,
i keep at 128min and i got no reboot errors,
the OP must not have followed the instructions or has missed a step
deathnotice01 said:
i've used this kernel before for 3-weeks,
i keep at 128min and i got no reboot errors,
the OP must not have followed the instructions or has missed a step
Click to expand...
Click to collapse
It has minimum freq. At 208mhz....
How u used 128...????
And the kernel has got random reboot issue.....
Sent from my GT-S5360 using xda app-developers app
@MR. Deathnotice01 and Mr. Anmol Sharma.....I'll now keep the max. frequency at 1.2 GHz and the min. at 832 MHz..Then, can I use Link2SD...Actually the problem stopped after uninstalling the system app Link2SD..(But JB v3 has got it pre-installed)...What I want to do next is to increase internal memory using link2sd and increase RAM using Swap-Partition...Please confirm..
Ritayan Roy said:
I am using Merruk Technology Kernel 2.5 Deluxe with JellyBlast v3.0.2 Custom ROM....I have Link2SD installed..My phone keeps rebooting every 10-15 mins...Please help me in this case~
Click to expand...
Click to collapse
use ondemand governor and vr scheduler.i use it without any issue...
Ritayan Roy said:
@MR. Deathnotice01 and Mr. Anmol Sharma.....I'll now keep the max. frequency at 1.2 GHz and the min. at 832 MHz..Then, can I use Link2SD...Actually the problem stopped after uninstalling the system app Link2SD..(But JB v3 has got it pre-installed)...What I want to do next is to increase internal memory using link2sd and increase RAM using Swap-Partition...Please confirm..
Click to expand...
Click to collapse
Their is no problem in using link2sd.....u can increase ur ram and internal storage....
Sent from my GT-S5360 using xda app-developers app
merruk kernel phone shutdown reboot
I had a similar problem with hyperion rom v. 8 and merruk kernel 2.5.
I installed kernel with odin before and then upgrade with ext4_converter all in one with cwm.
In my case the phone doesn't reboot but shutdown. It seems i have solved the problem editing the file undervolting under /etc/init.d and changing -120 with -90 mV
Bye!
This is my first useful post.I'm good in linux and kernel, please give me the possibility to post to development section
sercik said:
I had a similar problem with hyperion rom v. 8 and merruk kernel 2.5.
I installed kernel with odin before and then upgrade with ext4_converter all in one with cwm.
In my case the phone doesn't reboot but shutdown. It seems i have solved the problem editing the file undervolting under /etc/init.d and changing -120 with -90 mV
Bye!
This is my first useful post.I'm good in linux and kernel, please give me the possibility to post to development section
Click to expand...
Click to collapse
First of all complete 10 posts and then you'll be able to post in development section.
Sent from my GT-S5360 using xda premium
I just keep my music player running at 0 volume....never let your phone sleep
luciferabby said:
I just keep my music player running at 0 volume....never let your phone sleep
Click to expand...
Click to collapse
you'll kill your battery with CPU usage
Max-1.2
Min-312
Lionheart
Sio
there will be no automatic reboots. no need of playing musiq.......
SENT FROM NeMES|S PHO€NiX with MT 2-5 #206©®
Always set minimum CPU frequency to 312MHz
-->that is the advice of Maroc-OS to avoid random reboots
I'm using Merruk Kernel 2.5 now, and no random reboots... :laugh:
***I'm new to XDA ***
Josh Claudio said:
Always set minimum CPU frequency to 312MHz
-->that is the advice of Maroc-OS to avoid random reboots
I'm using Merruk Kernel 2.5 now, and no random reboots... :laugh:
***I'm new to XDA ***
Click to expand...
Click to collapse
the op of this thread is over a year old and the last post of this thread was nearly a year ago - please dont dig up old threads
marcussmith2626 said:
the op of this thread is over a year old and the last post of this thread was nearly a year ago - please dont dig up old threads
Click to expand...
Click to collapse
Oops! Sorry... I haven't seen the date...
Because I'm just new here