Hey guys,i have gingerDX v19 but i don't know how to overclock my XPERIA?
Help me pls
you may instal alfs kernel he has oc built in
Download modules...put in sys or istal via adb...
Sent from my X8 using XDA App
Like Norbula said, flash yourself another kernel to your lovely X8 which has an OC module in it and you're good to go
my fon with alfs kernel has new life
norbula2008 said:
you may instal alfs kernel he has oc built in
Click to expand...
Click to collapse
+1
This kernel have best overclock for X8
there is new v04 with oc 787 max
unlock your bootloader then OC with alfs kernel
marko93 said:
Hey guys,i have gingerDX v19 but i don't know how to overclock my XPERIA?
Help me pls
Click to expand...
Click to collapse
You might want to look at THIS
You can overclock your phone in Cyanogenmod settnings
Sent from my X8 using Tapatalk
Yes, but you must have the OC module or an OC kernel installed for doing this.
cool i can oc my phone to 768.. still no problem until now..
Sent from my X8 using XDA App
use modelu overclocked
codfreak said:
Yes, but you must have the OC module or an OC kernel installed for doing this.
Click to expand...
Click to collapse
Hello sry for intervening i didnt want to open a new thread
so i have mini 2.1.8,nAa 10, but after i set the cpu freq to 652 mhz i get massive screencuts can u help?(i have followed the instructions at doixahnn thread step by step)can u help???
gagagio said:
Hello sry for intervening i didnt want to open a new thread
so i have mini 2.1.8,nAa 10, but after i set the cpu freq to 652 mhz i get massive screencuts can u help?(i have followed the instructions at doixahnn thread step by step)can u help???
Click to expand...
Click to collapse
Set governor to smartassV2 before you start overclocking. It might help.
Sent from my E15i using XDA App
Related
Hi, I have x8 with GingerDx 17 and LinuxDx 004. I have tried oc 004 and "better X8OVERCLOCK" but not work. Why? I use setcpu. Thanks
Oc is module working only with stock kernel
Sent from my X8 using XDA Premium App
Yep, and doixanh doesn't like overclocking, so he won't put it in his kernel. You need to wait for freexperia kernel
Howell it's not the topic question, i'd like to ask what are actually the pros and the cons of OC'ing?
for me it depends on what you use your phone for...if you OC it the battery will last less (depending on the freq)...if you use it for gaming you can OC but for daily use I don't think you should (not at 800mHz anyways)...so figure it out...for me...I do not need it...I need battery cheers
it would be great GDX+LDX+OC u.u...but doixanh still being great
HI GUYS
sorry i have searched but i didn't find what i exactly wanted.!
i'm using stock kernal and gingerxperia v22
what is the max cpu Frequency which is stable???
sorry for my bad english.!
Great Boy said:
HI GUYS
sorry i have searched but i didn't find what i exactly wanted.!
i'm using stock kernal and gingerxperia v22
what is the max cpu Frequency which is stable???
sorry for my bad english.!
Click to expand...
Click to collapse
It depends on you phone's cpu, mate ..
Mine is stable at 748MHz ...
Its all about EXPERIMENT !
Sent from my X8 using Tapatalk
Yea, its about experiment, mine stable at 748, reboot at 787 when running bencmark n some instensive app
*__________* |Sony Erricsson X8 White-Dark&Blue| Alfs 06 No Caps| Fde Xperience 2.4.3| Unlocked Bootloader 11W26|748 Mhz| 700MiB 60 Swap| 128 Ext-2 APP2SD| Class 4 8GiB SDCARD| AnTuTu 1950-2050+ (May Change)
Thanks button> ---------------------------------------------------------------------------------------------------------------------------------------------Y
CKKnot said:
Yea, its about experiment, mine stable at 748, reboot at 787 when running bencmark n some instensive app
*__________* |Sony Erricsson X8 White-Dark&Blue| Alfs 06 No Caps| Fde Xperience 2.4.3| Unlocked Bootloader 11W26|748 Mhz| 700MiB 60 Swap| 128 Ext-2 APP2SD| Class 4 8GiB SDCARD| AnTuTu 1950-2050+ (May Change)
Thanks button> ---------------------------------------------------------------------------------------------------------------------------------------------Y
Click to expand...
Click to collapse
Same here
Sent from my X8 using Tapatalk
Just dont set frequency at boot and see how much can you OC it.
mine is stable at 748mhz(alfs kernel)
meine at 600 and 728 on alfs and nAa
729mhz on stock and nAa kernel
787mhz on Alfs kernel
729 mhz on Alfs is stable
Guys How to overclock x8 dude
Check this out
Mohamedshajid said:
Guys How to overclock x8 dude
Click to expand...
Click to collapse
dude.. Yse the search buttom re......... use doxinah module . he has done brilliant work ... thanks to him we cn overlock with stock kernel..
Mine stable on 748
Sent from my X8 using Tapatalk
768 is very stable for me..787 still ok but at 806 phone reboot sometimes
Mine is stable on 806MHz but if I switch it up to 825 I get restarts when I use certain apps, such as Market.
It's strange, I can do Stress Test for an hour with SetCPU at 825, but when I use Market it restarts my phone.
AKK9 said:
Mine is stable on 806MHz but if I switch it up to 825 I get restarts when I use certain apps, such as Market.
It's strange, I can do Stress Test for an hour with SetCPU at 825, but when I use Market it restarts my phone.
Click to expand...
Click to collapse
use dx modules?
721 MHz on stock kernel running 2.3.7
Sent from my X8 using Tapatalk
Now iam using a Ginger Xperia ROM. But OC Was Builtin up to 820 mhz i think so.. That was truly awesome xD
Yeah, I use those modules on FroyoBread and stock kernel I think.
Why do you guys always wanted to fry your phone? Btw Im just wondering. Others cooked roms you guys fry phones. hehe peace on you.
I'm with 715...
Nope, I'm just kidin, just want to do, but I don't even know how to install the module. =(
Sent from my X8 using XDA App
hello, my English is not too good. I have a problem. Well, this kernel ALFS install to my xperia x8 GignerDx ROM. When overclocking the CPU to 729mhz my phone restarts. Is it possible to somehow change the value of the CPU between 600 and 729 mhz? Please any advice.
Thank you and best regards
Your hardware seem not stable with oc so dont use it
Sent from my X8 using xda premium
the stock kernel was stable 710mhz, wants so much to set this kernel ALFS but I do not know how, unless already tried everything Please help
pieciak said:
the stock kernel was stable 710mhz, wants so much to set this kernel ALFS but I do not know how, unless already tried everything Please help
Click to expand...
Click to collapse
Did u install chargemon+vold yet?
Sent from my X8 using xda premium
just install, but what it has to do with overclocking the CPU and the stupidy skip between 600 and 729mhz I just want you to set 700MHz or 710 and I will be happy ...
pieciak said:
just install, but what it has to do with overclocking the CPU and the stupidy skip between 600 and 729mhz I just want you to set 700MHz or 710 and I will be happy ...
Click to expand...
Click to collapse
If u use gingerdx it cant becoz gingerdx not include oc in it only alfs 729mhz+
Sent from my X8 using xda premium
to whom I turn to do some update to the kernel and teeth OC was between 600MHz and 729mhz?
Hi, I installed the rom in my tablet hydro 4.1 jb, I wanted to know if someone could give me a flashable kernel with the ability to overclock 1.7GHz in performance. thanks in advance
There was one rom that I was using, at 1.66ghz actually makes it overheat, I don't think 1.7ghz is safe tho
http://forum.xda-developers.com/showthread.php?t=1901784
I juz flash it two days ago and it was stable but it did overheat so be careful...and u have to flash v01 first
Sent from my ST25a using xda app-developers app
i've done everything but the max oc with this rom is 1.3 ghz, i don't know why...
anthraxx90 said:
i've done everything but the max oc with this rom is 1.3 ghz, i don't know why...
Click to expand...
Click to collapse
maybe, because you did not put it in performance mode
attached is a OC kernel for 1.66ghz, do NOT use deadline I/O scheduler, its buggy, CFQ with interactive governor is the way to go !!
Psyloid said:
maybe, because you did not put it in performance mode
attached is a OC kernel for 1.66ghz, do NOT use deadline I/O scheduler, its buggy, CFQ with interactive governor is the way to go !!
Click to expand...
Click to collapse
Yah like what he said, need to be in performance mode to oc
Sent from my ST25a using xda app-developers app
What is the best kernel in its terms? I know each kernel is good for something, but can you site which is which?
I'm planning to change, merruk has been a real pain in the butt. It keeps rebooting even though its only set to 834 mhZ. -____-"
And also any suggestion for a good rom? I wanted the resurecctionremix but its only for s2.
Ciao.
If you are not using cm7 then savies kernel is good
kurotsugi's kuro kernel is not bad too
for rom try hyperion or jellyblast v3
which rom are you using right now??
If you are using hyperion then random reboots may be due to high undervolting
go to system/etc/init.d and search for 00undervolt
if its not there then look for bacem_tweak
edit it using root explorer and change undervolt value to -100mV (or less eg -80mV) save and reboot.. Random reboots are fixed
I'm using Jellyblast v.3.0.4 on Merruks Kernel. Its rebooting every now and then.
pochic1996 said:
I'm using Jellyblast v.3.0.4 on Merruks Kernel. Its rebooting every now and then.
Click to expand...
Click to collapse
Keep max freq to 1.248Ghz and min freq to 312Mhz and change ur governer to fix random reboots.
samir basnet said:
Keep max freq to 1.248Ghz and min freq to 312Mhz and change ur governer to fix random reboots.
Click to expand...
Click to collapse
What governor do you recommend?
pochic1996 said:
What governor do you recommend?
Click to expand...
Click to collapse
For battery saving conservative and for performance activecats,bcm etc Plz press Thanks if i Helped u.
samir basnet said:
For battery saving conservative and for performance activecats,bcm etc Plz press Thanks if i Helped u.
Click to expand...
Click to collapse
Any advantages with savie kernel? I noticed your signature.
pochic1996 said:
Any advantages with savie kernel? I noticed your signature.
Click to expand...
Click to collapse
Yah it`s very stable(rock solid) ,smooth and battery friendly too.
samir basnet said:
Yah it`s very stable(rock solid) ,smooth and battery friendly too.
Click to expand...
Click to collapse
How about speed?
pochic1996 said:
How about speed?
Click to expand...
Click to collapse
It`s fast too but is not overclocked.
MT only !
only Merruk MT kernels can deliver 100% performance and sophistication.
many other kernels are so poorly documented they give everyone a pain in the lower back :silly:
But Merruk kernel gas rebooting and Wakelock problems. I used it for some some days then changed.
Sent from my GT-S5360 using xda premium
maxxinn said:
But Merruk kernel gas rebooting and Wakelock problems. I used it for some some days then changed.
Sent from my GT-S5360 using xda premium
Click to expand...
Click to collapse
yeah, same too me.
Now i use Whitexp Kernel 1.3.3
Merruk kernel is great.But its for experts (hehe)
Savie is stable (im using it on hyperion, but boot is slow)
kuro just right (stable, and it has all you need)
white xp fast (tried it, it has fast card read)
MY OPINION