Hi, I installed the rom in my tablet hydro 4.1 jb, I wanted to know if someone could give me a flashable kernel with the ability to overclock 1.7GHz in performance. thanks in advance
There was one rom that I was using, at 1.66ghz actually makes it overheat, I don't think 1.7ghz is safe tho
http://forum.xda-developers.com/showthread.php?t=1901784
I juz flash it two days ago and it was stable but it did overheat so be careful...and u have to flash v01 first
Sent from my ST25a using xda app-developers app
i've done everything but the max oc with this rom is 1.3 ghz, i don't know why...
anthraxx90 said:
i've done everything but the max oc with this rom is 1.3 ghz, i don't know why...
Click to expand...
Click to collapse
maybe, because you did not put it in performance mode
attached is a OC kernel for 1.66ghz, do NOT use deadline I/O scheduler, its buggy, CFQ with interactive governor is the way to go !!
Psyloid said:
maybe, because you did not put it in performance mode
attached is a OC kernel for 1.66ghz, do NOT use deadline I/O scheduler, its buggy, CFQ with interactive governor is the way to go !!
Click to expand...
Click to collapse
Yah like what he said, need to be in performance mode to oc
Sent from my ST25a using xda app-developers app
Related
hello, my English is not too good. I have a problem. Well, this kernel ALFS install to my xperia x8 GignerDx ROM. When overclocking the CPU to 729mhz my phone restarts. Is it possible to somehow change the value of the CPU between 600 and 729 mhz? Please any advice.
Thank you and best regards
Your hardware seem not stable with oc so dont use it
Sent from my X8 using xda premium
the stock kernel was stable 710mhz, wants so much to set this kernel ALFS but I do not know how, unless already tried everything Please help
pieciak said:
the stock kernel was stable 710mhz, wants so much to set this kernel ALFS but I do not know how, unless already tried everything Please help
Click to expand...
Click to collapse
Did u install chargemon+vold yet?
Sent from my X8 using xda premium
just install, but what it has to do with overclocking the CPU and the stupidy skip between 600 and 729mhz I just want you to set 700MHz or 710 and I will be happy ...
pieciak said:
just install, but what it has to do with overclocking the CPU and the stupidy skip between 600 and 729mhz I just want you to set 700MHz or 710 and I will be happy ...
Click to expand...
Click to collapse
If u use gingerdx it cant becoz gingerdx not include oc in it only alfs 729mhz+
Sent from my X8 using xda premium
to whom I turn to do some update to the kernel and teeth OC was between 600MHz and 729mhz?
The name tells everything. This thread will help you to find the best ROM and Kernel if you're looking for pure performance. The best scores will be listed in the second post.
Post your whole setup you're running and screenshots of the scores.
Antutu and Quadrant scores would be great.
Please list the:
-ROM you're running
-Kernel
-CPU frequency
-I/O scheduler
-
So it's time for me to post my own scores:
Setup:
-Omega 6.0
-Siyah 1.2.6
-1700mHz
-VR
Current top scores from Sak500
Setup: Blackstar V2 ROM with Perseus kernel
-Omega 6.0
-Siyah 1.2.6
-1704mHz
-noop
Currently on perseus kernel @ 1800mhz
Blackstar v2 ROM
Please can anybody post their stock firmware benchmark results. I am getting very low results in the ranges between 8000 to 9000.
Stoc
k firmware
Sent from my GT-I9300 using xda premium
sak500 said:
Currently on perseus kernel @ 1800mhz
Blackstar v2 ROM
Click to expand...
Click to collapse
Man you're lucky to be able to OC your S3 to 1800mhz.
I can't even OC it to 1800mhz at 1475mV without it restarting.
mine on stock
@rajverrock maybe u get that results bcuz ur running the benchmark with power saving mode enabled
Stock XXALF6
Sent from my GT-I9300 using xda premium
Sent from my GT-I9300 using Tapatalk 2
danielmm88 said:
Man you're lucky to be able to OC your S3 to 1800mhz.
I can't even OC it to 1800mhz at 1475mV without it restarting.
Click to expand...
Click to collapse
What's ur rom and kernel? I've had problem with siyah and other kernels so have stayed with perseus.
Stock LF1 with all the VodaFone bloatware but S-Voice disabled.
sak500 said:
What's ur rom and kernel? I've had problem with siyah and other kernels so have stayed with perseus.
Click to expand...
Click to collapse
I posted my results a few posts above yours
Siyah 1.2.6 and Omega 6.0
im using aokp rom with siyah kernal
im running at 1700ghz
tried 1800ghz already but it just seems to reboot
Diaze said:
mine on stock
@rajverrock maybe u get that results bcuz ur running the benchmark with power saving mode enabled
Click to expand...
Click to collapse
Friend I have checked that my power saving mode is disabled and still i am getting the same results. And also my Antutu tells that my S3 runs on ArmV7 with triple core. Is this a bug or really my phone has triple core not a quadcore? Can anybody confirm it? Thanks for your help friends.
Can you add what the highest score holder is running to the second post. This way we dont have to search through the pages to find out.
In this case its easy while the number of pages is low but to help going forward.
Edit: Also does it make sense to have a quad core high bench as well as a dual core??
Love the post, thanks.
sak500 said:
What's ur rom and kernel? I've had problem with siyah and other kernels so have stayed with perseus.
Click to expand...
Click to collapse
Im using omega 7 fresh wipe installed and siyah 1.2.6 but the maximum Im getting is 5900, do you use oc and extewaks if what are your settings?
I uploaded this video on my YouTube channel.
c903jerk said:
I uploaded this video on my YouTube channel.
Click to expand...
Click to collapse
Nothing there.....
audino said:
Im using omega 7 fresh wipe installed and siyah 1.2.6 but the maximum Im getting is 5900, do you use oc and extewaks if what are your settings?
Click to expand...
Click to collapse
As mentioned above i've o/c'd the phone to 1800mhz. That's how the score is high. Also i dont know if siyah is good for o/c but perseus and nimpahatimine are good kernels.
Hey....guys i installed repencis rom 3.5 for galaxy y......it's kinda great.....but one problem....i dunno how to overclock my phone on this new custom rom.....i tried the same overclock procedure that i tried wen i had my stock rom but the phone did not start up on this new rom during boot process...please help urgent??????
Sharran said:
Hey....guys i installed repencis rom 3.5 for galaxy y......it's kinda great.....but one problem....i dunno how to overclock my phone on this new custom rom.....i tried the same overclock procedure that i tried wen i had my stock rom but the phone did not start up on this new rom during boot process...please help urgent??????
Click to expand...
Click to collapse
I am very sorry to inform you that Repensis Kernel doesn't support overclocking. If you want an overclock kernel, try Merruk Technology Kernel V2.5. Else, flash Savie's Kernel and overclock it the way you did so. Merruk kernel v2.5 is already overclock to 1.2 GHz. You don't need to flash overclock zip again. But Savie kernel is not yet overclock. You need to flash the overclock zip file to overclock it to 900MHz. Only Stock kernel, merruk kernel and savie kernel supports overclocking till date of all the available kernels for Galaxy Y. Always keep in mind that overclocking drains the battery and heats up the phone which can cause damage to your handset. Just reflash Repensis Rom v3.5 via Clockwork Mode Recovery or via Stock Recovery.
Hit thanks if I helped you.
Sent from my GT-S5360 using xda premium
thadoukuki said:
I am very sorry to inform you that Repensis Kernel doesn't support overclocking. If you want an overclock kernel, try Merruk Technology Kernel V2.5. Else, flash Savie's Kernel and overclock it the way you did so. Merruk kernel v2.5 is already overclock to 1.2 GHz. You don't need to flash overclock zip again. But Savie kernel is not yet overclock. You need to flash the overclock zip file to overclock it to 900MHz. Only Stock kernel, merruk kernel and savie kernel supports overclocking till date of all the available kernels for Galaxy Y. Always keep in mind that overclocking drains the battery and heats up the phone which can cause damage to your handset. Just reflash Repensis Rom v3.5 via Clockwork Mode Recovery or via Stock Recovery.
Hit thanks if I helped you.
Sent from my GT-S5360 using xda premium
Click to expand...
Click to collapse
thanks a lot for the help....
thadoukuki said:
I am very sorry to inform you that Repensis Kernel doesn't support overclocking. If you want an overclock kernel, try Merruk Technology Kernel V2.5. Else, flash Savie's Kernel and overclock it the way you did so. Merruk kernel v2.5 is already overclock to 1.2 GHz. You don't need to flash overclock zip again. But Savie kernel is not yet overclock. You need to flash the overclock zip file to overclock it to 900MHz. Only Stock kernel, merruk kernel and savie kernel supports overclocking till date of all the available kernels for Galaxy Y. Always keep in mind that overclocking drains the battery and heats up the phone which can cause damage to your handset. Just reflash Repensis Rom v3.5 via Clockwork Mode Recovery or via Stock Recovery.
Hit thanks if I helped you.
Sent from my GT-S5360 using xda premium
Click to expand...
Click to collapse
You are WRONG.Repencis kernel CAN OVERCLOCK to 312,624,832,also have governors and io scheduler and i use it daily Trust me @Shaaron,repencis kernel can overclock.
funny95 said:
You are WRONG.Repencis kernel CAN OVERCLOCK to 312,624,832,also have governors and io scheduler and i use it daily Trust me @Shaaron,repencis kernel can overclock.
Click to expand...
Click to collapse
Man,where is the overclock frequency???
hmahadi98 said:
Man,where is the overclock frequency???
Click to expand...
Click to collapse
Flash repencis kernel(i use old,from repencis v3.5 rom not new) and install no frills cpu control from google play and you see frequency(312,624,832) also governors and io scheduler and set what frequency you want.I use min 312 and max 624 governor ondemand,io scheduler sio.After my opinion these settings are good because battery not drain fast and performance are good.But if i play gsmes like angry birds i set to min 832 max 832 governor performance and io scheduler vr.
funny95 said:
You are WRONG.Repencis kernel CAN OVERCLOCK to 312,624,832,also have governors and io scheduler and i use it daily Trust me @Shaaron,repencis kernel can overclock.
Click to expand...
Click to collapse
My dear, do you really know what overclocking means? Our CPU is meant to run at the max frequency of 832 MHz and min frequency of 312Mhz. If you want it to run at frequencies higher than 832MHz, you have to overclock the cpu. If you can make your cpu run at frequencies higher than 832 Mhz then it means you have overclocked your cpu and your kernel supports overclocking.I have tried to overclock repensis v3.5 kernel before, and I was stuck at Samsung Galaxy Y screen and the phone didn't boot up thereby indicating that the kernel doesn't support overclocking and hence the cpu cannot be overclock. In short, overclocking a cpu means to make the cpu run at frequencies higher than its permissible max frequency as set my the manufacturer. Better do a little research before posting.
Sent from my GT-S5360 using xda premium
HELP ..
Help PLEASE ... I installed CREED'S ROM 3.5... and I want to overclock it to 1.2 gHz... Please help me step by step procedure!!!! Godbless You
Thanks to tegrak now we can easily overclock our note.
Lets Start...
1)First download Tegrak Overclock from playstore.
2)Open the app and in the main window press "Load Overclocking Module"
3)You are ready!!!!
You can easily go: (this are max frequencies, non recomended and stable)
CPU @ 1,6Ghz
Gpu @400Mhz
Lock your gpu @267Mhz
Change Governors an Io schedulers.
Undervolt
Undervolting and Gpu Oc is available only on paid version
Ps:Many thanks to altae for posting this in another thread
Great and use. Nofriils for boot at startup thank
Envoyé depuis mon GT-N7000 avec Tapatalk
Anyone tried? Does it work??
Sent from my GT-N7000 using Tapatalk 2
I try it just for game, and work fine sure
Tegrak NOT works with some kernels. For example, it doesn't works with CM kernel or any STOCK kernel. I'm using it, and I'm using HydraCore kernel. Be careful when you Overclock/Undervolt your CPU or GPU. If you reduce the voltages too much, the note will freeze.
Just to warn....
edit: i just saw the title is "on xxlsa and xxlsc". I didn't know it works with stock (or Philz) JB kernels. Could someone confirm that? Thanks
Overclocking-Undervolting is to do with care. I knew Tegrak 1 year ago... I've uninstalled it, because of easy unstability if not the correct values applied. We must read something about this before apply any value!
The best way, INMHO, to overclock, is to flash a Notecore or Hydracore OC Kernel, whose values has been adapted by developer to our Notes. And use CPU Master or SetCpu to create profiles.
To play with "volting" is an adventure...
Tegrak works on stock (philz) JB kernels. Stock vídeo player dont work if you use Tegrak. Its the only issue i have found.
KD-Rocket fusion+TSF shell+280dpi+1,6OC
You need the paid Version to clock the GPU to 400 MHz...
aftnoon2 said:
Overclocking-Undervolting is to do with care. I knew Tegrak 1 year ago... I've uninstalled it, because of easy unstability if not the correct values applied. We must read something about this before apply any value!
The best way, INMHO, to overclock, is to flash a Notecore or Hydracore OC Kernel, whose values has been adapted by developer to our Notes. And use CPU Master or SetCpu to create profiles.
To play with "volting" is an adventure...
Click to expand...
Click to collapse
Notecore or hydracore dont work on TW JB roms.
KD-Rocket fusion+TSF shell+280dpi+1,6OC
Bad-Pixel said:
Tegrak NOT works with some kernels. For example, it doesn't works with CM kernel or any STOCK kernel. I'm using it, and I'm using HydraCore kernel. Be careful when you Overclock/Undervolt your CPU or GPU. If you reduce the voltages too much, the note will freeze.
Just to warn....
edit: i just saw the title is "on xxlsa and xxlsc". I didn't know it works with stock (or Philz) JB kernels. Could someone confirm that? Thanks
Click to expand...
Click to collapse
Overclocking seems to work on xxlsc
From the man in your attic...
howard bamber said:
Overclocking seems to work on xxlsc
From the man in your attic...
Click to expand...
Click to collapse
Undervolt also? And oc/uv for gpu? Is it works also? It would be perfect!
Sent from my GT-N7000 using xda premium
I thought it was stable on jb, but it is far from it. Mine crashed and boot looped. Had to restore.
From the man in your attic...
howard bamber said:
I thought it was stable on jb, but it is far from it. Mine crashed and boot looped. Had to restore.
From the man in your attic...
Click to expand...
Click to collapse
I don't know the reason for your crash, but maybe you undervolted too much (or your cpu simply doesn't support the OC until 1.6).
I can give you the oc/uv values i'm using everyday (all perfect, no freezes or anything else). You can try these:
(my note has cpu group B and i'm using the hydracore 7.5 maxfu, but i guess those values are okay for almost every note with cpu group b and them don't depend from the kernel you're using)
[CPU]
1400 = 1225mV
1200 = 1150mV
1000 = 1050mV
800 = 1000mV
500 = 925mV
200 = 900mV
100 = 900mV
[GPU]
400 = 1000mV (i'm using this gpu overclock since few days, but it seems to be stable enough)
267 = 900mV
160 = 850mV
[SCHEDULER]
cfq (it was "noop", but i wanted to try this "cfq")
[GOVERNOR]
pegasusq
Everything with "set on boot" ON
Temperatures are ok, even with OC on cpu and gpu. (I remember you i'm using asylumPhoenix rom)
Maybe it will not solve your issue, but you can try
We cant download from playstore in our country
Any chance to have mirror link for download tegrak app?
Sent from my GT-N7000
guys be patient, dont judge JB from their leaks
stock JB will be a better experience
once the sources are released there will be more kernels to choose from......
farzin_silver said:
We cant download from playstore in our country
Any chance to have mirror link for download tegrak app?
Sent from my GT-N7000
Click to expand...
Click to collapse
I could give you a link to download it, but you couldn't use it because you need to buy the full version. The free version is needed ony to know if your kernel is compatible with the tegrak app
Bad-Pixel said:
I could give you a link to download it, but you couldn't use it because you need to buy the full version. The free version is needed ony to know if your kernel is compatible with the tegrak app
Click to expand...
Click to collapse
You can overclock THE Cpu with the free one, too. But GPU OC is not possible, nor undervolting is...
Petros_tigra said:
Thanks to tegrak now we can easily overclock our note.
Lets Start...
1)First download Tegrak Overclock from playstore.
2)Open the app and in the main window press "Load Overclocking Module"
3)You are ready!!!!
You can easily go: (this are max frequencies, non recomended and stable)
CPU @ 1,6Ghz
Gpu @400Mhz
Lock your gpu @267Mhz
Change Governors an Io schedulers.
Undervolt
Ps:Many thanks to altae for posting this in another thread
Click to expand...
Click to collapse
You forgot to add "only in paid version"
Sent from my GT-N7000 using Xparent ICS Tapatalk 2
Have you tried the market enabler app?
Sent from my GT-N7000 using xda app-developers app
I've installed ParanoidAndroid latest rom + Mkernel a46, and when I checked CPU statistics, my default max speed is set to 1500Mhz. Is that normal? Does this mean that my CPU is already overclocked from stock 1,3 Ghz?
polik1 said:
I've installed ParanoidAndroid latest rom + Mkernel a46, and when I checked CPU statistics, my default max speed is set to 1500Mhz. Is that normal? Does this mean that my CPU is already overclocked from stock 1,3 Ghz?
Click to expand...
Click to collapse
maybe that kernel had that freq as default
don't worry dude, just downclock
and, wrong section pal
polik1 said:
I've installed ParanoidAndroid latest rom + Mkernel a46, and when I checked CPU statistics, my default max speed is set to 1500Mhz. Is that normal? Does this mean that my CPU is already overclocked from stock 1,3 Ghz?
Click to expand...
Click to collapse
You installed a custom kernel but didn't even read about it?
- Note: Tegra sets the max frequency to 1.5Ghz at boot, make sure to change it manually or have an app set it at boot to avoid battery loss.
Click to expand...
Click to collapse
Go read the kernel OP.
khaytsus said:
You installed a custom kernel but didn't even read about it?
Go read the kernel OP.
Click to expand...
Click to collapse
Some kernels are bundled with roms.
Sent from the unknown abyss
_______________
She has said it, And you said it again.
SammyDroidWiz said:
Some kernels are bundled with roms.
Sent from the unknown abyss
_______________
She has said it, And you said it again.
Click to expand...
Click to collapse
That is not the case here. OP is using an alpha release of m-kernel, which must be downloaded separately. One needs to at least perform their own due diligence and not go blindly flashing something.
Sent from my Galaxy Nexus using Tapatalk 2
Odp: [Q] Why my Nexus runs at 1,5 Ghz?
Thanks, I didn't see the advices for kernel, they're indeed in kernel thread. My bad. Fixed already, thanks a lot!