Database Users

Silicon Protection

Hi, I'm looking for a silicon protection for my kaiser. Yesterday I drop my kaiser for my first time... It has 3 horrible body scratches now... the smooth surface is anything but scrached protected...
I'm now looking for some kind of protection. My first idea was to get a silicon protector, like those used for ipods... But I have not been able to find any....
Does any of you own one of those?
Any recomendation?

http://shop.brando.com.hk/prod_detail.php?prod_id=02247&dept_id=039&cat_id=0763

Thanks for the info!!!
Are u using one of those? Are u still able to use the HTC holder (The one included in the original HTC TyTN 2 box)?
Have u buy any other product from that website?
thanks !!!!!

I am not using it for the TyTNII, but had one for the P3600. Have ordered many products from that site.....no problems whatsoever. Still think Brando screen protectors are amongst the best you can find.

Has anyone seen a similar silicone case but with a plastic screen protector like that for the wizard?
- TKN

How the Brando works if we slide and tile the screen? Anyone can post a pic for this?

they sell it on ebay for $10 shipped

Hi,i've bought one for my trinity and it was very effective.So i command one ( Brando ) for my Kaiser.I've received it today and it's really a bad product,the protection fall all the time.So i continue to use my trinity silicon case.So don't buy this !

I've got one off eBay, maybe fake who knows, but it suffers exactly as Marcdu81 says. Its rubbish, falls off all of the time, on the Artimes, I used a silicon protector in cunjunction with a slip case, and was hoping to repeat that with the kaiser. Looks like the Seido super thin case is the only way, at ~£30 to the UK. I only paid £80 + contract for the kaiser so £30 is a lot for a case. I'll carry on hunting for a good and cheap case.

DO NOT BUY THAT!!!
It's a piece of junk just like everyone said. The best protection currently for this device is the Seidio rubberized case. I know it's pricey, but it's well worth it.
Trust me, I tried the cheap way and got that piece of crap from ebay. Do like I did and bite the bullet. You can get the Seidio rubberized case for a few bucks cheaper on ebay.
http://cgi.ebay.com/724-Seidio-Rubb...ryZ20337QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
Actually, once you get the Seidio case, the crappy silicone case fits much better when you use both at the same time.

do they sell the Seidio rubberized case without the hole for the second camera in the front? my tilt doesnt have the second camera.

gotdibz said:
do they sell the Seidio rubberized case without the hole for the second camera in the front? my tilt doesnt have the second camera.
Click to expand...
Click to collapse
Unfortunately, they don't... Yet. They say they MIGHT in the future but I wouldn't hold my breath. Believe me, the beauty of this case makes up for the useless hole.

Is this the one you guys are saying is crap? >>>http://www.buy.com/retail/product.asp?sku=207883654&listingid=21964170&dcaid=17902

This is the one i have and it fits like a globe.
you can find it on ebay onder this name: Seidio Rubberized Case HTC Tilt 8925/Kaiser/TyTN 2
or go to tiltsite.com and seach for seidio brand

mobits said:
Is this the one you guys are saying is crap? >>>http://www.buy.com/retail/product.asp?sku=207883654&listingid=21964170&dcaid=17902
Click to expand...
Click to collapse
Yes that's the one they're saying is rubbish. I ordered one too and the thing just will not stay on. I hate it when the rubber falls off

elypsar said:
Yes that's the one they're saying is rubbish. I ordered one too and the thing just will not stay on. I hate it when the rubber falls off
Click to expand...
Click to collapse
THAT'S WHAT SHE SAID! HAHAHAHAHAHAHAHAHAHAHAHA
But Anyway I have to second or third the notion about the Seido Rubberized Case. It stays on the Phone SO well and you can slide a tilt with ease. It's so awesome.

Thanks guys, I'm going to bite the bullet and get the Seidio rubberized case then. Hopefully there won't be problems with this rubber falling off!

mobits said:
Thanks guys, I'm going to bite the bullet and get the Seidio rubberized case then. Hopefully there won't be problems with this rubber falling off!
Click to expand...
Click to collapse
and... i'll pay US$10 for such a case on ebay or some other B2C website...not very cheap...

Case for the Mugen 3000mAh battery?

I'm listening to shoutcast a lot by using HSDPA (though not actually using HSDPA speeds) with Pocket player but I'm having power problems. The battery usually only lasts the trip to work (1hour) and then maybe 2 hours more. I'm very mobile in my work (furnishing carpenter) and I want my phone on me while I work. That's why I can't let it be connected to the power outlet while at work. I currently have the Seidio 1600mAh battery and the PDAir hardcase.
That's why I've been looking at the Mugen 3000mAh battery and rubberized case which let's you slide the phone without removing, from a store on eBay.
Case: http://cgi.ebay.com/NEW-BLACK-HARD-...photoQQcmdZViewItemQQ_trksidZp1742.m153.l1262
Battery: http://cgi.ebay.com/NEW-EXTENDED-BA...photoQQcmdZViewItemQQ_trksidZp1742.m153.l1262
Will this work?
Thanks.

The 3000mAh battery requires an extended battery cover, which makes the phone thicker. So that case will not work with the rubberized battery; at least the back of it won't. The front probably would still fit.

Yes I was expecting that but I thought that at lower part of the case would cover half of the lower part of the phone. In that case at least most of the phone is covered. But is there no case that will perfectly fit together with the 3000mAh battery with a belt clip preferably a hard or rubberized case?
edit: What are my options really for a better battery life? Portable charger?

i've got the seidio and unfortunately it seems these type of cases 'snap on' to the phone through tabs. so they must be deep enough or it just won't stay on.
i also have a capdase leather case, which has some sort of shallow tray that fits tightly around the bottom of the stock phone (no plastic). i had hoped to use this with the mugen, but the mugen's replacement case tapers in so it won't fit in the capdase case.... so right now if i use the mugen 3000mah, i just take the phone around 'naked'.
i've been pondering the possibility of one of those cases with the half plastic thing that goes over the keyboard will work... the mugen case makes the phone about 1-2mm thicker. but then again, i'm not keen to buy yet another case for the thing.

That's interesting. 1-2mm thicker isn't that much really. But looking at the Capdase leather and the Nakedcellphone's plastic case pictures it seems It was specially made for the standard hatch+battery. I guess the same applies for the Seidio one.
I have an old Axim X50V with an extended battery and a PDAir alu hard case so it shouldn't be impossible to make one for the Kaiser.
Have you checked if the phone with the Mugen battery works with the OEM leather case?
Thanks.
edit: I think I meant the standard leather case.

so far ??? only one will do with the Mugen 3000mAh ...
Kaiser stock case
http://forum.xda-developers.com/showpost.php?p=1853879&postcount=28
~~~

Unfortunately, the at&t version doesn't come with a case at all. Where can I find the Kaiser stock case? I couldn't find anything on HTC's website.
Thanks,

UnicornKaz said:
so far ??? only one will do with the Mugen 3000mAh ...
Kaiser stock case
http://forum.xda-developers.com/showpost.php?p=1853879&postcount=28
~~~
Click to expand...
Click to collapse
If we are thinking about the same Kaiser stock case (the horizontal one in leather) then I have tried this one and it isn't optimal. The phone is simply to tightly squeezed inside the case.
Actually I bought a case from the same shop on Ebay that sold the Mugen battery (Nakedcellphone) and it fits perfectly with enough room for ventilation but the sides of the clip are starting to fall off for some reason so I've put that one away. The best option for me would be a hard case probably by PDAir but I can't find one. The problem with these belt cases is that whenever you want to use your phone It's unprotected.
At the moment I'm simply using a thick textile bag for it. I also have the phone around the neck with a necklace. It works ok but I would really like a rubberized or a hard case.

kcrumbley said:
Unfortunately, the at&t version doesn't come with a case at all. Where can I find the Kaiser stock case? I couldn't find anything on HTC's website.
Thanks,
Click to expand...
Click to collapse
I seem to remember seeing it on bestbuy business. Otherwise try ebay.
I think this is one actually. Looks like this but with HTC logo on the front.
http://www.puremobile.com/HTC/HTC-TyTN/TyTN-II-Leather-Case-Retail-Packaging/

Best case for Tilt

Hey guys/gals, just thought I'd share this with you. I bought this case for my Tilt and it's one of the best I've had. The phone fits perfect in this case. Snug but easy to get out. I paid $12 on ebay for it. Make sure you buy the one with the attached belt clip (like in my pic). There is another one on there that allows you to change the belt clip. I had that one too but (same perfect fit) but unless you have a thin belt, the clip will not catch the belt. I'll include one of my previous cases. This one is just a better looking case and feels real sturdy. Hope you like it.

Have you seen a case that exposes the miniUSB port? I've seen a lot of good cases, but none that will expose the miniUSB. My second option would be just to go with the Seidio Slim Ruberized case.
Kraize

Kraize92 said:
Have you seen a case that exposes the miniUSB port? I've seen a lot of good cases, but none that will expose the miniUSB. My second option would be just to go with the Seidio Slim Ruberized case.
Kraize
Click to expand...
Click to collapse
Unfortunatly no I haven't. There's a thread on here that has the Seido clip with mods on it. Looks sweet.

I recently had bought a case for my Wing (before getting the tilt) and it fits the tilt perfectly and allows access to the usb port - unfortunately it seems the ebay seller is no longer registered so I can't even get the details from the auction.
This is HTC branded and the listing was titled NEW HTC TOUCH SHADOW MOGUL VX6800 MDA OEM LEATHER CASE
Edit - Found the case, different seller and more expensive, but you can see it - http://cgi.ebay.com/OEM-Leather-Case-Pouch-for-HTC-Wing-P4350-Herald-XV6800_W0QQitemZ150268701210QQihZ005QQcategoryZ20336QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

I've got the Krusell Orbit leather case with multidapt and I really like it, I've tried several so far and this is the one that I'm keeping...
http://www.krusell.se/product.php?productID=2776&category=51
I've also got the Krusell CarHoldicKit adapter as well to go with it, I like being able to unclip my phone from my belt with the clip still remaining on my belt, and attach to dashboard while driving, it makes using the GPS very easy and other related accessories as well...

dampeal said:
I've also got the Krusell CarHoldicKit adapter as well to go with it, I like being able to unclip my phone from my belt with the clip still remaining on my belt, and attach to dashboard while driving, it makes using the GPS very easy and other related accessories as well...
Click to expand...
Click to collapse
It works that well? I was interested in both the orbit and carholickit (think i still have an old one), but was thinking the flap would be in the way when using it for GPS? This isn't the case?

airjer said:
It works that well? I was interested in both the orbit and carholickit (think i still have an old one), but was thinking the flap would be in the way when using it for GPS? This isn't the case?
Click to expand...
Click to collapse
The flap and GPS? No, I have my mounted like this, so when I open flap it just rests on dashboard:
If you wish you can read my full review of the Orbit HERE, lots of pictures etc included of course

dampeal said:
I've got the Krusell Orbit leather case with multidapt and I really like it, I've tried several so far and this is the one that I'm keeping...
http://www.krusell.se/product.php?productID=2776&category=51
Click to expand...
Click to collapse
That's the one I've just bought... and I like it a lot. Fits really well although the slideout keyboard doesn't slide as smoothly now it's in the case.

dampeal said:
The flap and GPS? No, I have my mounted like this, so when I open flap it just rests on dashboard:
If you wish you can read my full review of the Orbit HERE, lots of pictures etc included of course
Click to expand...
Click to collapse
Thanks for the GREAT review.

I have this HTC OEM case and it's real nice and pretty cheap. Fits perfectly with the Seidio case installed on the Tilt.

I recently purchased the Seidio rubberized case/holster combo. This is an excellent product. I was looking for protection for the Tilt's body, however, wanted to access the screen. I was using the metal case from Monaco, very well built, however, twice my Tilt fell out of the case when the unit was on my belt and the latch caught on the bumper of my car and the Tilt when bouncing on the pavement. Also, my signal was very weak with the metal case, never realized this was the problem as I always used a metal case. I switched to this combo unit and I now have an extra 1-2 bars of signal regularly. Also, I like the fact the holster will hold the unit with the skin in place, faces inward, giving max protection to the screen which is easily accessed. If you want a case to protect the body of the tilt, access the screen easily, and use with a belt clip (do not have to use the clip holster), I could not imagine a better choice. I am very happy with the quality and design of the unit.
https://www.seidioonline.com/ProductDetails.asp?ProductCode=BD2-HLCSRCG8925-BK

jim131 said:
I recently purchased the Seidio rubberized case/holster combo. This is an excellent product. I was looking for protection for the Tilt's body, however, wanted to access the screen. I was using the metal case from Monaco, very well built, however, twice my Tilt fell out of the case when the unit was on my belt and the latch caught on the bumper of my car and the Tilt when bouncing on the pavement. Also, my signal was very weak with the metal case, never realized this was the problem as I always used a metal case. I switched to this combo unit and I now have an extra 1-2 bars of signal regularly. Also, I like the fact the holster will hold the unit with the skin in place, faces inward, giving max protection to the screen which is easily accessed. If you want a case to protect the body of the tilt, access the screen easily, and use with a belt clip (do not have to use the clip holster), I could not imagine a better choice. I am very happy with the quality and design of the unit.
https://www.seidioonline.com/ProductDetails.asp?ProductCode=BD2-HLCSRCG8925-BK
Click to expand...
Click to collapse
i second that one. ive gone thru metal, silicone, plastic and even leather cases for my tilt. none of which seemed to work until I went with the seidio innocase holster combo that the gentleman above me stated. its really the best case and it comes with the holster facing inward so you can have maximum protection for your phone with easy access. point blank period.

thetruth1985 said:
i second that one. ive gone thru metal, silicone, plastic and even leather cases for my tilt. none of which seemed to work until I went with the seidio innocase holster combo that the gentleman above me stated. its really the best case and it comes with the holster facing inward so you can have maximum protection for your phone with easy access. point blank period.
Click to expand...
Click to collapse
With that case do you have to face it inside, and is it really worth $50.00? Geez their high.
I already have a soft rubber case and wondering if I could get buy just buying the holster for it.

texas said:
With that case do you have to face it inside, and is it really worth $50.00? Geez their high.
I already have a soft rubber case and wondering if I could get buy just buying the holster for it.
Click to expand...
Click to collapse
not necessarily, you could face it either way and its worth it. believe me, its worth it. even though its a little pricey.

The rubberized case is good. I gave up on the holster because the clip kept getting caught and would disengage the phone causing it to fall.
I got a Palm Treo case and it fits perfectly. The Seidio case also prevents the Tilt's buttons from being accidentally pressed.
This is the best combination of all the cases I have tried.

grymicast184rc said:
I have this HTC OEM case and it's real nice and pretty cheap. Fits perfectly with the Seidio case installed on the Tilt.
Click to expand...
Click to collapse
This is the same case I have. Been very happy with it! For the person who asked... it does leave the USB port exposed.

mrschwarz said:
The rubberized case is good. I gave up on the holster because the clip kept getting caught and would disengage the phone causing it to fall.
I got a Palm Treo case and it fits perfectly. The Seidio case also prevents the Tilt's buttons from being accidentally pressed.
This is the best combination of all the cases I have tried.
Click to expand...
Click to collapse
what holster were u using

GuySparkz said:
what holster were u using
Click to expand...
Click to collapse
I bought the Seidio case and holster combo kit.

any docking stations that fit the snap on case?

are there any docks out there that fit the fuze when it has the seidio innocase on?

I was wondering the exact same thing!!!

doesnt look like anybody knows.

I will be interested too. I had a hard time finding out about a pouch that would fit the phone w/ the Innocase. Probably because not too many are using it.
Best regards.

This dock from sedio says it should fit it with the case on.
I'm curious about the fit on this dock, i am mainly interested because it has a slot for an extra battery and was wodering if anyone has any experience with the seidio case and this dock. If anyone has the case and this dock also, I would like their opinion on it also.

I just ordered a couple of very inexpensive docks w/ battery charger from a website and I will post as soon as I get them.
Best regards.

thanks, keep us updated. i know the seidio one works with it but i want one that has a battery charger built in.

I know from personal experience that this one will NOT work with the Seido Innocase installed:
http://shop.brando.com.hk/prod_detail.php?prod_id=02926&dept_id=039&cat_id=0951
They have 2 other similar ones that I expect won't work either since they are based on the same design.

SVT Driver said:
I know from personal experience that this one will NOT work with the Seido Innocase installed:
http://shop.brando.com.hk/prod_detail.php?prod_id=02926&dept_id=039&cat_id=0951
They have 2 other similar ones that I expect won't work either since they are based on the same design.
Click to expand...
Click to collapse
Could you not take out the adapter in the middle for it? Or is the area around where the phone touches the dock just one whole piece?

Colleagues,
Finally... The 2 cradles I ordered finally arrived. So... does the phone with the Seidio snap on case fit on it? Not right out of the box, but... if you are creative you can use pliers to kind of push the connector on the cradle a little bit forward and it works perfectly. This cradle has the slot for charging a battery as well as a USB cable. It only costs $19.99 with free shipping (no, I don't know the vendor).
Here is the link:
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&ssPageName=ADME:B:EOIBSAA:US:11&Item=220342876747
Best regards.

thanks man... im gonna get it.

Kursell orbit flex case fits with Dock
Well I just got my kursell orbit flex case and I also have a docking station for my touch pro and it fits on the up right doc while in the leather case I have posted a review of the kursell case on this forum look for it but here is a link to the case http://www.cases.com/kr75388.htm

droptopmetro said:
Could you not take out the adapter in the middle for it? Or is the area around where the phone touches the dock just one whole piece?
Click to expand...
Click to collapse
The part of the cover where the phone sits is all one piece with the mini-usb connector sticking up in the middle. The opening is molded to the shape of a naked touch pro.
I could probably take a dremel tool to it but it would look pretty bad since the whole dock is shiny black.

Just got my N6P and need some accessories

Hey guys, I am new here. Just got my N6P and need some accessories, like screen protector, case and others. Do you have any brands to suggest?
Thanks

skin - dbrand and slickwraps
tempered glass - intelliarmor

ayush84 said:
skin - dbrand and slickwraps
tempered glass - intelliarmor
Click to expand...
Click to collapse
Agreed.
As for cases it's all personal preference. I like minimal cases so I prefer the Verus one but they need to widen the charging port first. If you like protective bulky ones then the SUPcase Beetle seems pretty good but no one has received one yet.
If you go over to the accessories forum you'll find amazing reviews of the intelliarmor due to their superb customer service.
You're most likely gonna need] an additional USB Type C to Type A cable. But as of now most aren't up to spec and those that are, are either sold out or over priced. Just make sure you don't lose your current cable for now.
I also got an aluminum stand and a wooden one for my phone since it doesn't have wireless charging. You can find a bunch on Amazon. Just be careful if you buy an aluminum one as they might bend the charging cable if you set the phone vertically.
If you need a portable charger Aukey and Anker come to mind. Both have excellent products and customer service and often coupon codes on Amazon.

ReaperNY said:
I also got an aluminum stand and a wooden one for my phone since it doesn't have wireless charging. You can find a bunch on Amazon. Just be careful if you buy an aluminum one as they might bend the charging cable if you set the phone vertically.
Click to expand...
Click to collapse
What brand did you get for the stands?

airwa1kin7 said:
What brand did you get for the stands?
Click to expand...
Click to collapse
I believe it was Lamicall and Moko but both bend the wire. As for the wood one I just bought the combo one for the iPhone and Apple Watch. It's very common on Amazon.

Ordered my clear cushion 6p case from apigen in early October and its arrived also got some crystal clear screen protectors hers some pics,
P's great case it not to big
Sent from my Nexus 6P using XDA Free mobile app

pifsworld said:
Ordered my clear cushion 6p case from apigen in early October and its arrived also got some crystal clear screen protectors hers some pics,
P's great case it not to big
Sent from my Nexus 6P using XDA Free mobile app
Click to expand...
Click to collapse
Nice case! Thanks!

ReaperNY said:
Agreed.
You're most likely gonna need] an additional USB Type C to Type A cable. But as of now most aren't up to spec and those that are, are either sold out or over priced. Just make sure you don't lose your current cable for now.
Click to expand...
Click to collapse
Just ordered the iOrange-E USB Type C cable which will be here tomorrow. Benson did a great job!:good: Thanks!