Database Users

PDAir Kaiser case

I bought the PDAir flip case for the Kaiser last week and got it in yesterday's mail. You can order it from PDAir direct -- there's also a guy on eBay selling them for $18.99.
The case is a very snug fit -- the keyboard slides into a pouch formed by the back of the case and a clear plastic keyboard cover. This works much better than the clear plastic & velcro keyboard cover their Wizard case used -- the Wizard case was pretty loose, and the Velcro doesn't hold up to repeated opening/closing.
The case cutouts (for buttons, USB jack, etc) match up pretty well once you get the Kaiser firmly seated -- that can take a bit of work since the case is so snug. These cutouts make the buttons easy to find -- especially the power button.
The only real problem with this case, IMHO, is the lack of microSD card storage -- previous PDAir cases have had at least one card storage pocket. Overall I'd give this case an 8.5 out of 10.

3waygeek said:
The case is a very snug fit -- the keyboard slides into a pouch formed by the back of the case and a clear plastic keyboard cover. This works much better than the clear plastic & velcro keyboard cover their Wizard case used -- the Wizard case was pretty loose, and the Velcro doesn't hold up to repeated opening/closing.
The case cutouts (for buttons, USB jack, etc) match up pretty well once you get the Kaiser firmly seated -- that can take a bit of work since the case is so snug. These cutouts make the buttons easy to find -- especially the power button.
Click to expand...
Click to collapse
Nice review, I'll probably get one.
The only real problem with this case, IMHO, is the lack of microSD card storage -- previous PDAir cases have had at least one card storage pocket. Overall I'd give this case an 8.5 out of 10.
Click to expand...
Click to collapse
I find an 8/16GB micro sd card enough, I put the spares in my normal money wallet.

I bought one a while back and it lasted less than a month,I was using the belt clip and the leather on the back became loose and the case became useless.!

PDA Air book type case
Bought this on ebay $15 + postage another $15 to GB
I don't use belt clips, it is a little thick and tight, may wear in. I seem to buy a whole shed load of accessories initially, see what I like, and then re-cycle the rest back onto ebay.
So far i quite like it if I'm walking about, but in the office, I tend to take it out and put it my shirt pocket (why do so many work shirts these days are less a pocket!!?)

I have both PDAir and Krusell case and to be frank, I like the PDAir more. However, beware of the screwed in belt clip as it might get loosen after some time, I dropped mine once but luckily on the carpet.

I Agree that the PDAir is a pretty good case, the belt clip post is the only part I changed. For a case that can stay on and be fully functional, and clip into a car mount, this one is hard to beat.
Here's my review and pics of my "improvements";
http://forum.xda-developers.com/showpost.php?p=1648005&postcount=136
I have since switched to the Pocket Solutions "Signature Series" flip as it's the best of all worlds for me as I can use the phone as a touch screen type and then very easily slip the phone out of the case to use the keyboard and/or show off the phone with no case. It really has the best swivel post I've ever seen;
http://forum.xda-developers.com/showpost.php?p=1790595&postcount=246

I bought the rectangular one with the free battery and it fits great and works great. The price for the whole thing was less then half the price of a battery from AT&T. Only thing is it took almost 3 wks to get.
I'm thinking about getting another one for my office.

How about this one ? Not sure how bulky it is but it looks nice.
_www.seidioonline.com/index.asp?PageAction=VIEWPROD&ProdID=896

RemE said:
I Agree that the PDAir is a pretty good case, the belt clip post is the only part I changed. For a case that can stay on and be fully functional, and clip into a car mount, this one is hard to beat.
Here's my review and pics of my "improvements";
http://forum.xda-developers.com/showpost.php?p=1648005&postcount=136
I have since switched to the Pocket Solutions "Signature Series" flip as it's the best of all worlds for me as I can use the phone as a touch screen type and then very easily slip the phone out of the case to use the keyboard and/or show off the phone with no case. It really has the best swivel post I've ever seen;
http://forum.xda-developers.com/showpost.php?p=1790595&postcount=246
Click to expand...
Click to collapse
Where did you bought your vent clip???
thanks

Best case for Tilt

Hey guys/gals, just thought I'd share this with you. I bought this case for my Tilt and it's one of the best I've had. The phone fits perfect in this case. Snug but easy to get out. I paid $12 on ebay for it. Make sure you buy the one with the attached belt clip (like in my pic). There is another one on there that allows you to change the belt clip. I had that one too but (same perfect fit) but unless you have a thin belt, the clip will not catch the belt. I'll include one of my previous cases. This one is just a better looking case and feels real sturdy. Hope you like it.

Have you seen a case that exposes the miniUSB port? I've seen a lot of good cases, but none that will expose the miniUSB. My second option would be just to go with the Seidio Slim Ruberized case.
Kraize

Kraize92 said:
Have you seen a case that exposes the miniUSB port? I've seen a lot of good cases, but none that will expose the miniUSB. My second option would be just to go with the Seidio Slim Ruberized case.
Kraize
Click to expand...
Click to collapse
Unfortunatly no I haven't. There's a thread on here that has the Seido clip with mods on it. Looks sweet.

I recently had bought a case for my Wing (before getting the tilt) and it fits the tilt perfectly and allows access to the usb port - unfortunately it seems the ebay seller is no longer registered so I can't even get the details from the auction.
This is HTC branded and the listing was titled NEW HTC TOUCH SHADOW MOGUL VX6800 MDA OEM LEATHER CASE
Edit - Found the case, different seller and more expensive, but you can see it - http://cgi.ebay.com/OEM-Leather-Case-Pouch-for-HTC-Wing-P4350-Herald-XV6800_W0QQitemZ150268701210QQihZ005QQcategoryZ20336QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

I've got the Krusell Orbit leather case with multidapt and I really like it, I've tried several so far and this is the one that I'm keeping...
http://www.krusell.se/product.php?productID=2776&category=51
I've also got the Krusell CarHoldicKit adapter as well to go with it, I like being able to unclip my phone from my belt with the clip still remaining on my belt, and attach to dashboard while driving, it makes using the GPS very easy and other related accessories as well...

dampeal said:
I've also got the Krusell CarHoldicKit adapter as well to go with it, I like being able to unclip my phone from my belt with the clip still remaining on my belt, and attach to dashboard while driving, it makes using the GPS very easy and other related accessories as well...
Click to expand...
Click to collapse
It works that well? I was interested in both the orbit and carholickit (think i still have an old one), but was thinking the flap would be in the way when using it for GPS? This isn't the case?

airjer said:
It works that well? I was interested in both the orbit and carholickit (think i still have an old one), but was thinking the flap would be in the way when using it for GPS? This isn't the case?
Click to expand...
Click to collapse
The flap and GPS? No, I have my mounted like this, so when I open flap it just rests on dashboard:
If you wish you can read my full review of the Orbit HERE, lots of pictures etc included of course

dampeal said:
I've got the Krusell Orbit leather case with multidapt and I really like it, I've tried several so far and this is the one that I'm keeping...
http://www.krusell.se/product.php?productID=2776&category=51
Click to expand...
Click to collapse
That's the one I've just bought... and I like it a lot. Fits really well although the slideout keyboard doesn't slide as smoothly now it's in the case.

dampeal said:
The flap and GPS? No, I have my mounted like this, so when I open flap it just rests on dashboard:
If you wish you can read my full review of the Orbit HERE, lots of pictures etc included of course
Click to expand...
Click to collapse
Thanks for the GREAT review.

I have this HTC OEM case and it's real nice and pretty cheap. Fits perfectly with the Seidio case installed on the Tilt.

I recently purchased the Seidio rubberized case/holster combo. This is an excellent product. I was looking for protection for the Tilt's body, however, wanted to access the screen. I was using the metal case from Monaco, very well built, however, twice my Tilt fell out of the case when the unit was on my belt and the latch caught on the bumper of my car and the Tilt when bouncing on the pavement. Also, my signal was very weak with the metal case, never realized this was the problem as I always used a metal case. I switched to this combo unit and I now have an extra 1-2 bars of signal regularly. Also, I like the fact the holster will hold the unit with the skin in place, faces inward, giving max protection to the screen which is easily accessed. If you want a case to protect the body of the tilt, access the screen easily, and use with a belt clip (do not have to use the clip holster), I could not imagine a better choice. I am very happy with the quality and design of the unit.
https://www.seidioonline.com/ProductDetails.asp?ProductCode=BD2-HLCSRCG8925-BK

jim131 said:
I recently purchased the Seidio rubberized case/holster combo. This is an excellent product. I was looking for protection for the Tilt's body, however, wanted to access the screen. I was using the metal case from Monaco, very well built, however, twice my Tilt fell out of the case when the unit was on my belt and the latch caught on the bumper of my car and the Tilt when bouncing on the pavement. Also, my signal was very weak with the metal case, never realized this was the problem as I always used a metal case. I switched to this combo unit and I now have an extra 1-2 bars of signal regularly. Also, I like the fact the holster will hold the unit with the skin in place, faces inward, giving max protection to the screen which is easily accessed. If you want a case to protect the body of the tilt, access the screen easily, and use with a belt clip (do not have to use the clip holster), I could not imagine a better choice. I am very happy with the quality and design of the unit.
https://www.seidioonline.com/ProductDetails.asp?ProductCode=BD2-HLCSRCG8925-BK
Click to expand...
Click to collapse
i second that one. ive gone thru metal, silicone, plastic and even leather cases for my tilt. none of which seemed to work until I went with the seidio innocase holster combo that the gentleman above me stated. its really the best case and it comes with the holster facing inward so you can have maximum protection for your phone with easy access. point blank period.

thetruth1985 said:
i second that one. ive gone thru metal, silicone, plastic and even leather cases for my tilt. none of which seemed to work until I went with the seidio innocase holster combo that the gentleman above me stated. its really the best case and it comes with the holster facing inward so you can have maximum protection for your phone with easy access. point blank period.
Click to expand...
Click to collapse
With that case do you have to face it inside, and is it really worth $50.00? Geez their high.
I already have a soft rubber case and wondering if I could get buy just buying the holster for it.

texas said:
With that case do you have to face it inside, and is it really worth $50.00? Geez their high.
I already have a soft rubber case and wondering if I could get buy just buying the holster for it.
Click to expand...
Click to collapse
not necessarily, you could face it either way and its worth it. believe me, its worth it. even though its a little pricey.

The rubberized case is good. I gave up on the holster because the clip kept getting caught and would disengage the phone causing it to fall.
I got a Palm Treo case and it fits perfectly. The Seidio case also prevents the Tilt's buttons from being accidentally pressed.
This is the best combination of all the cases I have tried.

grymicast184rc said:
I have this HTC OEM case and it's real nice and pretty cheap. Fits perfectly with the Seidio case installed on the Tilt.
Click to expand...
Click to collapse
This is the same case I have. Been very happy with it! For the person who asked... it does leave the USB port exposed.

mrschwarz said:
The rubberized case is good. I gave up on the holster because the clip kept getting caught and would disengage the phone causing it to fall.
I got a Palm Treo case and it fits perfectly. The Seidio case also prevents the Tilt's buttons from being accidentally pressed.
This is the best combination of all the cases I have tried.
Click to expand...
Click to collapse
what holster were u using

GuySparkz said:
what holster were u using
Click to expand...
Click to collapse
I bought the Seidio case and holster combo kit.

Seidio's Innocase Surface Case - Black

I've never had one before, but heard good things about the Seidio case. It's available for order now.
http://www.seidioonline.com/ProductDetails.asp?ProductCode=CSR2HTFE-BK
I just ordered the case and clip combo.
http://www.seidioonline.com/ProductDetails.asp?ProductCode=BD2-HLCSR2HTFE-BK
Might get the Innodock Jr. charger later.
http://www.seidioonline.com/ProductDetails.asp?ProductCode=CRJHTCX1-BKC

OlSarge said:
I've never had one before, but heard good things about the Seidio case. It's available for order now.
http://www.seidioonline.com/ProductDetails.asp?ProductCode=CSR2HTFE-BK
I just ordered the case and clip combo.
http://www.seidioonline.com/ProductDetails.asp?ProductCode=BD2-HLCSR2HTFE-BK
Might get the Innodock Jr. charger later.
http://www.seidioonline.com/ProductDetails.asp?ProductCode=CRJHTCX1-BKC
Click to expand...
Click to collapse
I owned the seidio clip holster for my Kaiser and loved it!! Very sturdy and comfortable. Will definitely be ordering one for my Rafael.

Have the hybrid case for the Kaiser. It still is a top-notch case (once Seidio gets their head out of their ass about their online support).

Just got the Innocase and it's much much better quality than the other Amazon one.
Another truly excellent case after the hybrid Seidio case on the Kaiser.
First 3 pictures are of Innocase
4th is with Amazon's case's top with thick borders around the screen
5th is comparison of these "Touch" screen border thickness.
Macro-mode for those that haven't figured it out in the Youtube videos. Yes, Amazon's case has its rubberization already peeling before I took it out of its shipping packet.

4th is with Amazon's case's top with thick borders around the screen
5th is comparison of these "Touch" screen border thickness.
Very illuminating photos - thank-you!
Was "reasonably certain" that would not find using the Touch Screen with a FINGER all that attractive - after all, have hardly ever used my Axim without the Stylus.
But in actual practice find that it IS often convenient to simply swipe a finger at the screen, and so your comments about the relative Screen Border Thickness - and hence the possibility of interference with finger-contact near the edges of the screen - are very interesting.
Still, $30 seems a lot for small hunk of plastic....

rkistler said:
But in actual practice find that it IS often convenient to simply swipe a finger at the screen, and so your comments about the relative Screen Border Thickness - and hence the possibility of interference with finger-contact near the edges of the screen - are very interesting.
Still, $30 seems a lot for small hunk of plastic....
Click to expand...
Click to collapse
As illustrated, the Seidio case is thin (on width) around the screen leaving plenty of space for finger-gestures. Hitting X and menus at bottom is no problem. The Amazon case felt like it was a 8525 again.
There's also velvet in the case back so it doesn't scratch the OEM smooth back. This raises the back a few mm above the original diamond plate, but with the speaker hole, it's all around good protection.
For $30, Seidio tends to be the first and last case you'll ever get because it's a perfect fit, and solid at protection and surviving drops. Only reason to switch to another case is they come out with some other fancy idea such as a hybrid rubber-crystal case + holster, or other colors. I would go for a white case.
I paid $8 (total) for the Amazon case and you can see what I got. Horribly fitting, messes with the slider, rubberization peeling before it came out of the bag. $30 isn't that bad especially since I'm still very happy with the hybrid-case I got for my Kaiser last year.
edit:
whatever case you guys end up getting, I have to say my FUZE is a much more pleasant beast now that the cold, slimy feeling is gone.

the amazon case you purchased is not a good example of the other options out there. I am not saying anything negative about the Seido case. I have seen it personally and it is a nice case, but the one on Ebay that many are buying is also pretty nice, and no issues with the pealing your pictures showed. The employees in my company have 6 Fuze phones and no one has had any issues like that. The biggest illusion with the phone shown at http://forum.xda-developers.com/showthread.php?t=459761 is that the border is white and not black like the rest of the case.
The $30 cost is the main objection, but in general Seido makes quality cases.
Overall it is very positive that there are multiple options now available and more coming each day.

does this one interfere with teh screen as reported on the other amazon/ebay one? something about the inside of the upper left corner pressing down on the screen makes one unable to use the screen after having the case on for a few days... the only way to resolve this with the other one is to file down the inside of the plastic part that touches the screen...
shade

shadeone said:
does this one interfere with teh screen as reported on the other amazon/ebay one? something about the inside of the upper left corner pressing down on the screen makes one unable to use the screen after having the case on for a few days... the only way to resolve this with the other one is to file down the inside of the plastic part that touches the screen...
shade
Click to expand...
Click to collapse
I'm interested in the answer to this question too. My initial attempt at sanding down my rubberized ebay case was not successful, my phone still locked up after a couple of days.
Fuze innocase owners, are you lockup free after days of operation?

jknuckey said:
I'm interested in the answer to this question too. My initial attempt at sanding down my rubberized ebay case was not successful, my phone still locked up after a couple of days.
Fuze innocase owners, are you lockup free after days of operation?
Click to expand...
Click to collapse
on your ebay case, why are you still locking up? mine is not locking up anymore at all after sanding down a little on the inside upper left side?

TVDinner said:
but the one on Ebay that many are buying is also pretty nice, and no issues with the pealing your pictures showed. The employees in my company have 6 Fuze phones and no one has had any issues like that. The biggest illusion with the phone shown at http://forum.xda-developers.com/showthread.php?t=459761 is that the border is white and not black like the rest of the case.
Click to expand...
Click to collapse
Just because you're happy with the work you put into fixing your Ebay case does not mean you should troll other case threads to protect your investment and mind-share about it. Also stating that I'm not a Seidio apologist since I haven't had the greatest shipping experience last time around, and their CS/managers lying back-and-forth about it.
Lock-ups? Are you seriously kidding? That's a red-flag for me right there. Even the Amazon case doesn't have that problem.
The Innocase is a perfect fit with no modifications necessary. That's what paying a slight premium gets you. Costs less than getting the Expansys Touch Pro back too.
It's like paying for the unlocked version of the phone. No crapware, loads of accessories, and special attention to details the cut-rate version doesn't have.
I've noticed the Ebay case has a huge clip tab right next to the volume-up button. The Seidio case clips seem to be more thoughtfully placed, and smaller, thinner. In fact, the bottom case has a cut-out curve around the volume/PTT buttons also that helps the case stay out of the way.

Thank you for you info, and no trolling (that made me laugh) intended. I have the ebay case AND have ordered the Seido case, which we were waiting for. Thanks again.

OlSarge said:
I've never had one before, but heard good things about the Seidio case. It's available for order now.
http://www.seidioonline.com/ProductDetails.asp?ProductCode=CSR2HTFE-BK
I just ordered the case and clip combo.
http://www.seidioonline.com/ProductDetails.asp?ProductCode=BD2-HLCSR2HTFE-BK
Might get the Innodock Jr. charger later.
http://www.seidioonline.com/ProductDetails.asp?ProductCode=CRJHTCX1-BKC
Click to expand...
Click to collapse
I've had the case, belt clip and charger for a few days. Overall, I'm very happy with the products, and would purchase Seidio equipment again in the future. I've had a few different cases for my old 8525, and I like this one for my Fuze the best.
I love the case. It's not bulky, and has a good feel to it. I wasn't sure about the clips that hold the case to the phone, because they looked fragile...but it holds very nicely.
The belt clip for the case is fine. Seems to hold the phone and case in very well, and the belt clip will not slip off any belt I've tried it on.
The charger...I'm not happy with it. That's my fault not Seidio's, I didn't read the description of the charger. I'm sure it's a quality product. It is a small dock type charger, but comes with a cable with two large USB connections on it. So it can be docked when plugged into a computer's USB. I thought it would have a connection to plug into a wall outlet.

Just bought the combo pack, Will post pics when it arrives.

Just wondering if this case will fit the Bell / CDMA version, is it a rubber type compound, as well does the case scratch the phone in any way?
Thanks

Some questions?
For ppl that have the combo case/holster. Can you put the phone with the case on it, in the holster with screen facing in (screen facing you) and out (screen facing away from you)?
Thanks

TVDinner said:
Thank you for you info, and no trolling (that made me laugh) intended. I have the ebay case AND have ordered the Seido case, which we were waiting for. Thanks again.
Click to expand...
Click to collapse
Hey TVDinner, why did you order the Seidio case? Did your filed ebay case start locking up again?
To answer your question to me in my earlier response, I don't know why my ebay case locked up after my filing attempt. Maybe I didn't file it enough? My tolerance level for trial and error is pretty low, so maybe I'll just order the innocase...

jknuckey said:
Hey TVDinner, why did you order the Seidio case? Did your filed ebay case start locking up again?
To answer your question to me in my earlier response, I don't know why my ebay case locked up after my filing attempt. Maybe I didn't file it enough? My tolerance level for trial and error is pretty low, so maybe I'll just order the innocase...
Click to expand...
Click to collapse
Hi jknuckey - no my ebay case is working great to be honest. no issues at all after my initial filing on it. But I always need to have "the best" case, lol. I was originally waiting for the Seidio one, but they were taking to long and I ordered the ebay one. then shortly after the Seidio one became available, lol.

datruth said:
For ppl that have the combo case/holster. Can you put the phone with the case on it, in the holster with screen facing in (screen facing you) and out (screen facing away from you)?
Thanks
Click to expand...
Click to collapse
There are two models of the holster.
One that fits only just the phone:
https://www.seidioonline.com/ProductDetails.asp?ProductCode=HLHTFEAS
"Seidio's stylish holster provides the ultimate in convenience and functionality by securing your Smartphone on all sides.
- Unique Spring-Clip holds your device securely and lifts for quick access
- Soft-touch "rubberized" texture provides a unique look and extra protection
- Face-in design protects your device's screen
- Locking swivel belt clip with 7 rotating angles
- Easy access to connectors"
One that only fits the phone with the case:
https://www.seidioonline.com/ProductDetails.asp?ProductCode=HLHTFEASC
"Seidio’s Innocase holster offers the best carrying solution when paired with our Innocase.
- Designed specifically for Seidio Innocases
- Unique Spring-Clip holds your device securely and lifts for quick access
- Face-in design protects your device's screen
- Locking swivel belt clip with 7 rotating angles
- Easy access to connectors
*This holster is designed for use exclusively with our Innocases and will not fit a "naked" device or other manufacturer's products. "
The holsters are custom fit, the phone only goes in facing you.

NuShrike said:
Just got the Innocase and it's much much better quality than the other Amazon one.
Another truly excellent case after the hybrid Seidio case on the Kaiser.
First 3 pictures are of Innocase
4th is with Amazon's case's top with thick borders around the screen
5th is comparison of these "Touch" screen border thickness.
Macro-mode for those that haven't figured it out in the Youtube videos. Yes, Amazon's case has its rubberization already peeling before I took it out of its shipping packet.
Click to expand...
Click to collapse
Hey bro any peeling so far from the Innocase? I just ordered it... I had the ebay one but man screen still freezing after I filed.. bleh...

any docking stations that fit the snap on case?

are there any docks out there that fit the fuze when it has the seidio innocase on?

I was wondering the exact same thing!!!

doesnt look like anybody knows.

I will be interested too. I had a hard time finding out about a pouch that would fit the phone w/ the Innocase. Probably because not too many are using it.
Best regards.

This dock from sedio says it should fit it with the case on.
I'm curious about the fit on this dock, i am mainly interested because it has a slot for an extra battery and was wodering if anyone has any experience with the seidio case and this dock. If anyone has the case and this dock also, I would like their opinion on it also.

I just ordered a couple of very inexpensive docks w/ battery charger from a website and I will post as soon as I get them.
Best regards.

thanks, keep us updated. i know the seidio one works with it but i want one that has a battery charger built in.

I know from personal experience that this one will NOT work with the Seido Innocase installed:
http://shop.brando.com.hk/prod_detail.php?prod_id=02926&dept_id=039&cat_id=0951
They have 2 other similar ones that I expect won't work either since they are based on the same design.

SVT Driver said:
I know from personal experience that this one will NOT work with the Seido Innocase installed:
http://shop.brando.com.hk/prod_detail.php?prod_id=02926&dept_id=039&cat_id=0951
They have 2 other similar ones that I expect won't work either since they are based on the same design.
Click to expand...
Click to collapse
Could you not take out the adapter in the middle for it? Or is the area around where the phone touches the dock just one whole piece?

Colleagues,
Finally... The 2 cradles I ordered finally arrived. So... does the phone with the Seidio snap on case fit on it? Not right out of the box, but... if you are creative you can use pliers to kind of push the connector on the cradle a little bit forward and it works perfectly. This cradle has the slot for charging a battery as well as a USB cable. It only costs $19.99 with free shipping (no, I don't know the vendor).
Here is the link:
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&ssPageName=ADME:B:EOIBSAA:US:11&Item=220342876747
Best regards.

thanks man... im gonna get it.

Kursell orbit flex case fits with Dock
Well I just got my kursell orbit flex case and I also have a docking station for my touch pro and it fits on the up right doc while in the leather case I have posted a review of the kursell case on this forum look for it but here is a link to the case http://www.cases.com/kr75388.htm

droptopmetro said:
Could you not take out the adapter in the middle for it? Or is the area around where the phone touches the dock just one whole piece?
Click to expand...
Click to collapse
The part of the cover where the phone sits is all one piece with the mini-usb connector sticking up in the middle. The opening is molded to the shape of a naked touch pro.
I could probably take a dremel tool to it but it would look pretty bad since the whole dock is shiny black.

need good carry case

I have the kaiser with extended battery and the innanocase to cover it but I want a nice leather case to fit on my hip.. The cheap ones do not last long and I cannot find a good one to fit the extended. any ideas?
Thanks

Best case I ever bought - Naztech Gladiator
I don't know about all of you, but my cases take a beating! The longest any leather case lasted was 6 months. Then I found the Naztech Gladiator Case for my then phone, Palm 650 Treo.
When I upgraded to the Kaiser, I was pleasantly surprised to see that it fit. It comes with two belt clips, one metal (the one I usually use), the other is a snapped loop that fits on backpacks, etc. It used a d-clip (like the police use on their radios), so it won't slip out of the clip.
It has an adjustable depth, so it will likely fit the extended battery. It is a bit bulky and a bit industrial looking, but the durability offsets that IMHO. The closure is magnetic and has great tactile feedback so you know it is closed.
It sells for US $30-40, so it is a great value. It doesn't seem easy to find(took me two hours of looking!), http://naztech.com/products.php?id_prod=14.

Thanks for the cases. They are nice. I do not think I will go with the gladiator though because I prefer mine to lay horizontally on my side. I think i am going to go with the regent.