Related
Hello,
can someone help me? I've mounted the device in pink screen to my computer (Linux) an then I deleted all drives only the image folder I don't delete. I only replace the recovery.img file.
Can anyone help me?
Best regards and thank you for help
schuessm
schuessm said:
Hello,
can someone help me? I've mounted the device in pink screen to my computer (Linux) an then I deleted all drives only the image folder I don't delete. I only replace the recovery.img file.
Can anyone help me?
Best regards and thank you for help
schuessm
Click to expand...
Click to collapse
Try to put recovery.img from here http://forum.xda-developers.com/showthread.php?t=1288223.......
just check if image folder contains all necessary files other than recovery.img.
thank you krish_nank,
I do not touch any files on the image partition. the main problem is, that my phone doesn't do anything and so I can't mount the device and drives. When I connect the phone to the charger it doesn't charge, the LED doesn't light up. I can't go to the pink screen. Is there any way to connect the phone when it is offline? Or is there any hard reset function.
Thank you!
Bye
schuessm
schuessm said:
thank you krish_nank,
I do not touch any files on the image partition. the main problem is, that my phone doesn't do anything and so I can't mount the device and drives. When I connect the phone to the charger it doesn't charge, the LED doesn't light up. I can't go to the pink screen. Is there any way to connect the phone when it is offline? Or is there any hard reset function.
Thank you!
Bye
schuessm
Click to expand...
Click to collapse
Try to keep mobile connected to PC via USB for few minutes then try to go to Pink screen mode.......
Hello krish_nank,
I try everything, but no way the LED doesn't light up neither with the charger nor with the PC. But I'll try it again in the evening.
Any other ideas?
Thank you for your help
Greeting
schuessm
Now chance to work with the device. I sent it to the service.
schuessm said:
I've mounted the device in pink screen to my computer (Linux) an then I deleted all drives only the image folder I don't delete.
Click to expand...
Click to collapse
That's really stupid. Why do you do that without a backup?
Thank you But I've a backup, but I can't use it when the device doesn't start or is there a way to get access on an device wich isn't switch on?
Best regards
schuessm
schuessm said:
Thank you But I've a backup, but I can't use it when the device doesn't start or is there a way to get access on an device wich isn't switch on?
Click to expand...
Click to collapse
What's happended, when you connect your phone over usb to your computer?
What kind of backup do you have?
How did you do the backup?
Can you see some drives in your filemanager?
Let me explain. When I connect my unrooted phone to my computer, I see 5 drives. In the attached picture you can see the important drives and its filesystems. Please have a look at column "Einhängepunkt" to see it.
Perhaps this URL will you help a bit.
http://android.modaco.com/topic/341011-ultimate-guide-to-the-huawei-u8800/
2) Turn on your phone while holding VOL+ and VOL- (should come up with pink/purple screen)
Click to expand...
Click to collapse
Are you able to reach the pink/purple screen?
Have you tried taking the battery out?
Best regards,
Ponder
Hello Ponder Stibbons,
I can't turn on my u8800, that's my problem and that's the reason why I sent it to the service. I've backup 1:1 copy of the drives and one backup from recovery mode. There is no response when I connect the phone to the pc. When I connect there is no LED light on the same with charger. I dont know why but I think its a hardware problem. I've a second android handy, the samsung galaxy spica and I've no problems with this device and I've root it with many mods. what I'll say I'm not a beginner with root and mod an android device. I'll talk about the error when I#ve back my device from the service.
So long and thank you.
Best regards
schuessm
Hello all,
I've got the information from service, that the mainboard of the phone was changed ;-)
Best regards
schuessm
my u8800 get blue screen after i format all things and now my phone is died what can i do
when i press volume keys and power to enter boot mode the pink screen is appear and nothing do i try to connect phone with usb and my pc need drivers so what i can do plz help me thx
missing drivers
missing drivers what can i do
its giving bluescreen because the "image" folder you can find in pink screen is gone.
I have a backup from an official gingerbread.
what systems you have installed?
thx
Djuganight said:
its giving bluescreen because the "image" folder you can find in pink screen is gone.
I have a backup from an official gingerbread.
what systems you have installed?
Click to expand...
Click to collapse
thx i have update to U8800_Android 2.3 V100R001C00B526G001(Normal)
but sir now no usb drivers installed when i connect mobile to pc
plz help
plz some one help me phone cant boot and pc cant reed it plz help
basem666 said:
plz some one help me phone cant boot and pc cant reed it plz help
Click to expand...
Click to collapse
Oh, so simple, let prepare a formatted SD card, make a folder named "dload", copy the update.app in to the dload folder.
Insert the SDcard in to you phone, press Vol + and Vol - and Power button, waiting for the installing completed, remove battery for 5s then put it in you phone and switch on.
no thing done
hung.ngomanh said:
Oh, so simple, let prepare a formatted SD card, make a folder named "dload", copy the update.app in to the dload folder.
Insert the SDcard in to you phone, press Vol + and Vol - and Power button, waiting for the installing completed, remove battery for 5s then put it in you phone and switch on.
Click to expand...
Click to collapse
when i do this noting done pink screen still and nothing happen and my pc still need drivers
I can, try another sd card, because some dont working for installing update.
thxxxxxxxxxxxxxxxxxxx
Scuall said:
I can, try another sd card, because some dont working for installing update.
Click to expand...
Click to collapse
really u saved me thx deer thxxx alot my phone back again thxxxxxxxxxxx:fingers-crossed::good::good::good::good:
Hi guys, I saw that so much people have problem with SmartQ Z1 Lite. However, after few days watch becomes slow and it just have bootloop. I had same problem for weeks, until I found a way to fix it.
Notice! This tutorial is for LITE verrsion only, full version have it's own unbrick tool.
- Download the tools from attachment (end of thread)
- Make new folder on desktop and extract the downloaded .zip to that folder
1. STEP Entering the nexus
- Turn off the watch, make sure that is completely off (plug in the usb cable and check if your machine detects it)
- After that plug in usb cable and press the Power and Back button on watch together for few seconds, your PC will detect it as USB boot device or something
- Go to device manager and right click on that device and update driver software, browse computer and then Let me pick the button..
Click on All devices and then Have disk, browse to the tool folder and 32/64 bit usb driver and choose ini file
Install that driver.
- Unplug usb cable
2. STEP Preparing the savior
- Open TabControl.exe and right click on anywhere on tool, and then click Config
- Click on Import config and find the folder you extracted tool, then folder "ini" and choose the Jz4775--Nand-FINAL.ini
- Then click Manual config and where is uboot on the right "..." browse for the x-boot-nand.bin
- For uimage choose recovery.img
- And then click OK, and don't save the config
3. STEP Let the battle begins
- Plug in USB cable and the tool should start flashing new recovery
- Wait few minutes and it should write Successfull
- After that watch should turn off, unplug and plug in cable again
- Hold the power button for few seconds until you get a charging interface, press back button and hold, and then power button and hold untill it vibrates
- You should see factory upgrade interface and new removable disc should be in computer
- Copy the update.zip from required_flash_files/ folder to new removable disc.
- Now press the back button, and then again where is "Upgrade", your watch should get upgraded
Aaand voilaa!
DOWNLOAD
https://mega.co.nz/#!YBhzyJoY!yfIpdySc_NQDaBHEBPB0kY1yn81IxpKQzARO3B2U1OQ
i need a mirror link
Somebody do this?
is it working?
csonti02 said:
Somebody do this?
is it working?
Click to expand...
Click to collapse
I've sent you the mirror, as soon as i get more posts, i'll edit the thread with mirror.
link
https: //mega.co.nz/#!YBhzyJoY!yfIpdy...pKQzARO3B2U1OQ
HarisDev said:
I've sent you the mirror, as soon as i get more posts, i'll edit the thread with mirror.
Click to expand...
Click to collapse
---------- Post added at 10:26 PM ---------- Previous post was at 10:08 PM ----------
it is working. I try many times (3) but after working (write sacesfull) after i updated 1.5 and work.
many thanks.
csonti02 said:
https: //mega.co.nz/#!YBhzyJoY!yfIpdy...pKQzARO3B2U1OQ
Click to expand...
Click to collapse
Please send me a mirror I have had my watch shelved since March. You've just given me new hope.
siakgayyem said:
Please send me a mirror I have had my watch shelved since March. You've just given me new hope.
Click to expand...
Click to collapse
https://mega.co.nz/#!YBhzyJoY!yfIpdy...pKQzARO3B2U1OQ
Wow this method works. thank you very much. My watch has successfully booted at last since it started to bootloop last march. Harisdev you are a miracle worker. Csonti02 thanks for the link. Both you guys saved me a lot of money (which I dont have much) I was already contemplating on returning the watch to china for repairs. I can not thank you enough.
siakgayyem said:
Wow this method works. thank you very much. My watch has successfully booted at last since it started to bootloop last march. Harisdev you are a miracle worker. Csonti02 thanks for the link. Both you guys saved me a lot of money (which I dont have much) I was already contemplating on returning the watch to china for repairs. I can not thank you enough.
Click to expand...
Click to collapse
the wizard is harisdev ))))) thanks.
Yay.. glad to see that this helped to you guys.
If anyone needs help, feel free to post reply.
Perfect work! Now hold still trying to get to work with the latest update.
Any help for that i cannot get bluetooth on in lite ?
Tohelo said:
Perfect work! Now hold still trying to get to work with the latest update.
Any help for that i cannot get bluetooth on in lite ?
Click to expand...
Click to collapse
Hi Tohelo, thanks.
Try to download update.zip version 1.3 from official site (Click here!) and update by system upgrade. If u don't know how to, please tell me so I can write tutorial.
HarisDev said:
Hi Tohelo, thanks.
Try to download update.zip version 1.3 from official site (Click here!) and update by system upgrade. If u don't know how to, please tell me so I can write tutorial.
Click to expand...
Click to collapse
Yeah I've done that and the installation is successful but now I have a problem that I can not get bluetooth turned on
Tohelo said:
Yeah I've done that and the installation is successful but now I have a problem that I can not get bluetooth turned on
Click to expand...
Click to collapse
I will see tomorrow, i have some tasks to do..
really need help
HarisDev said:
Hi guys, I saw that so much people have problem with SmartQ Z1 Lite. However, after few days watch becomes slow and it just have bootloop. I had same problem for weeks, until I found a way to fix it.
Notice! This tutorial is for LITE verrsion only, full version have it's own unbrick tool.
- Download the tools from attachment (end of thread)
- Make new folder on desktop and extract the downloaded .zip to that folder
1. STEP Entering the nexus
- Turn off the watch, make sure that is completely off (plug in the usb cable and check if your machine detects it)
- After that plug in usb cable and press the Power and Back button on watch together for few seconds, your PC will detect it as USB boot device or something
- Go to device manager and right click on that device and update driver software, browse computer and then Let me pick the button..
Click on All devices and then Have disk, browse to the tool folder and 32/64 bit usb driver and choose ini file
Install that driver.
- Unplug usb cable
2. STEP Preparing the savior
- Open TabControl.exe and right click on anywhere on tool, and then click Config
- Click on Import config and find the folder you extracted tool, then folder "ini" and choose the Jz4775--Nand-FINAL.ini
- Then click Manual config and where is uboot on the right "..." browse for the x-boot-nand.bin
- For uimage choose recovery.img
- And then click OK, and don't save the config
3. STEP Let the battle begins
- Plug in USB cable and the tool should start flashing new recovery
- Wait few minutes and it should write Successfull
- After that watch should turn off, unplug and plug in cable again
- Hold the power button for few seconds until you get a charging interface, press back button and hold, and then power button and hold untill it vibrates
- You should see factory upgrade interface and new removable disc should be in computer
- Copy the update.zip from required_flash_files/ folder to new removable disc.
- Now press the back button, and then again where is "Upgrade", your watch should get upgraded
Aaand voilaa!
My watch is working and everynotification works but theres a problem where it says the application smartwatchlauncher stopped workig so i cant do anything including accessing settings but i get notifications and i cannot upgrade how will i fix this
Click to expand...
Click to collapse
http://www.smartdevices.com.cn/support/download/Zwatchqc/FirmWare/z1litev1.5.html
Download this and flash update.zip
its asking for a decryption key what is it also my computer wont dowload the other one because it says it a virus
Hi,
I'm having trouble in the last point of the first step.
I can only choose inf files, not ini files.
I am pretty sure i am following the steps right but i get stuck on that part.
HarisDev said:
Yay.. glad to see that this helped to you guys.
If anyone needs help, feel free to post reply.
Click to expand...
Click to collapse
Hi,
I'm having trouble in the last point of the first step.
I can only choose inf files, not ini files.
I am pretty sure i am following the steps right but i get stuck on that part.
Hello,
I bought recently a cube Iwork 8 (model u80gt) and trying to optimize battery life I changed some parameters in the BIOS and now It doesn´t boot anymore. As there is no way to reset the BIOS settings, I have to flash the BIOS chip with the original BIOS image but I don´t have it.
Could someone read a working BIOS and provide it to me so I can flash it in my tablet?
Bellow i prepared manual how to to do bios backup from windows, its 100% safe and take 5 minutes.
1. Boot into Windows
2. Download afuwin tool from ami.com website
3. Extract that archive on the tablet
4. Go to AFUWin folder
5. Run afuwingui.exe
6 Select save option
7. Save file
Once you have the ROM file please provide it to me via PM or directly in this thread.
Thanks in advance.
Hello, still needing it? And do you also have that not that much accurate touchscreen? When you move with windows or scroll, it skips every 3rd pixel or so. But when you try the windows paint app, you can draw dots on every pixel, so I think it has something to do with drivers/firmware/bios.
karmon81 said:
Hello,
I bought recently a cube Iwork 8 (model u80gt) and trying to optimize battery life I changed some parameters in the BIOS and now It doesn´t boot anymore. As there is no way to reset the BIOS settings, I have to flash the BIOS chip with the original BIOS image but I don´t have it.
Could someone read a working BIOS and provide it to me so I can flash it in my tablet?
Bellow i prepared manual how to to do bios backup from windows, its 100% safe and take 5 minutes.
1. Boot into Windows
2. Download afuwin tool from ami.com website
3. Extract that archive on the tablet
4. Go to AFUWin folder
5. Run afuwingui.exe
6 Select save option
7. Save file
Once you have the ROM file please provide it to me via PM or directly in this thread.
Thanks in advance.
Click to expand...
Click to collapse
Hi
i need this too, has anyone done this?
netphantm said:
Hi
i need this too, has anyone done this?
Click to expand...
Click to collapse
Hi,
I am providing bios file from my Cube iwork8 u80gt, if you still need it
I am stil new user, so I am not allowed to posting outside links
File is on megafileupload,
megafileupload.com/ml00/afuwin_u80gt.rom
Bios flash manual needed
karmon81 said:
Hello,
I bought recently a cube Iwork 8 (model u80gt) and trying to optimize battery life I changed some parameters in the BIOS and now It doesn´t boot anymore. As there is no way to reset the BIOS settings, I have to flash the BIOS chip with the original BIOS image but I don´t have it.
Could someone read a working BIOS and provide it to me so I can flash it in my tablet?
Bellow i prepared manual how to to do bios backup from windows, its 100% safe and take 5 minutes.
1. Boot into Windows
2. Download afuwin tool from ami.com website
3. Extract that archive on the tablet
4. Go to AFUWin folder
5. Run afuwingui.exe
6 Select save option
7. Save file
Once you have the ROM file please provide it to me via PM or directly in this thread.
Thanks in advance.
Click to expand...
Click to collapse
Hello, i have the same problem can you plaese provide the way that you flash your bios with the rom file , did you found other way to reset the setting ?
Thank you !
09msined said:
Hi,
I am providing bios file from my Cube iwork8 u80gt, if you still need it
I am stil new user, so I am not allowed to posting outside links
File is on megafileupload,
megafileupload.com/ml00/afuwin_u80gt.rom
Click to expand...
Click to collapse
hmm, I was not notified of your post, and the file link expired
can you please provide it again
thanks very much
netphantm.-
Same problem
Trying to change some settings in bios, after that tablet wont boot up at all.
No hdmi output , only red light when trying to charge.
but if connecting usb hub with lights lights power on when tryying to power tablet.
Maybe need debug port to connect tablet to pc to acces emmc to flash boot image?
Any way of getting the ROM again? I've got OTG-USB disabled by mistake.
Hi,
I recently reinstalled Windows 10 on a CSC Wisebook W803T (cheap tablet from Thailand) and ran into severe problems installing drivers as many of them can't be found on the net anymore. Windows Update didn't help because it loaded an I2C driver which was too new, so devices like touchscreen, rotation sensor, sound chip, GPS etc. couldn't even get detected by Windows.
With the help of another tablet owner I collected all the drivers (latest working version) necessary for the device to run properly. You can install the package with the program Double Driver, available for download here: http://boozet.org/dd.htm
Here you can get the driver package: https://www.dropbox.com/s/ebcyopsgdewl4vw/Wisebook W803T Drivers.zip?dl=0
VirusTotal Scan: https://www.virustotal.com/#/file/8...2a9277d74c17aa6d6ae3c75eba2cfe3f48f/detection
I hope this helps someone getting his Wisebook working again!
dropbox no download Damaged document
jakrapan2174 said:
dropbox no download Damaged document
Click to expand...
Click to collapse
Hi, try opening it directly with DD.
can't extract file file broken.
Nobel6601 said:
can't extract file file broken.
Click to expand...
Click to collapse
You cannot extract the file with another program, use Double Driver: http://boozet.org/dd.htm
I don't have bbackup.
Double Driver need backup and restore it back.
---------- Post added at 01:16 AM ---------- Previous post was at 01:08 AM ----------
can you give me Touchscreen driver.
Nobel6601 said:
Double Driver need backup and restore it back.
---------- Post added at 01:16 AM ---------- Previous post was at 01:08 AM ----------
can you give me Touchscreen driver.
Click to expand...
Click to collapse
The driver is in the ZIP package. Just open the ZIP with Double Driver!
Ok I'll try
---------- Post added at 02:33 AM ---------- Previous post was at 01:59 AM ----------
emm not work but all driver installed
---------- Post added at 02:44 AM ---------- Previous post was at 02:33 AM ----------
can you backup new? all driver installed but it' not working. and HID not show touchscreen device too
Installation
hi .. i am not sure if this thread is still available
i am facing the same problem as i have upgraded the tablet windows
my question is .. after downloading the driver pack and the DD software is this being done on the tablet itself ?
and is it only just choose restore on the DD to restore all the drivers ?
please your help
George1971 said:
hi .. i am not sure if this thread is still available
i am facing the same problem as i have upgraded the tablet windows
my question is .. after downloading the driver pack and the DD software is this being done on the tablet itself ?
and is it only just choose restore on the DD to restore all the drivers ?
please your help
Click to expand...
Click to collapse
Yes, you do this on the tablet. Just plug a mouse in with an adapter and use the on-screen-keyboard. Then you just have to restore everything from the driver package.
Hi
I did that and ask me to restart tablet
But nothing has happened .. Headache really
Installation
Da Bozz said:
Yes, you do this on the tablet. Just plug a mouse in with an adapter and use the on-screen-keyboard. Then you just have to restore everything from the driver package.
Click to expand...
Click to collapse
is there any other way that i can do this ?
can i install older windows like 8.1 and restore the drivers ?
George1971 said:
is there any other way that i can do this ?
can i install older windows like 8.1 and restore the drivers ?
Click to expand...
Click to collapse
I'm sorry, but my solution should be working. I don't know any other way.
Da Bozz said:
I'm sorry, but my solution should be working. I don't know any other way.
Click to expand...
Click to collapse
hi again ..
i have installed a clean windows 10 downloaded from internet
and i have done what you mentioned in the post
i managed to get all the drivers installed and i can see the battery icon and sound
but once the tablet ask me to restart everything disappears
am i doing anything wrong with installation ?
and is it possible to know which windows version you have ?
thanks again
George1971 said:
hi again ..
i have installed a clean windows 10 downloaded from internet
and i have done what you mentioned in the post
i managed to get all the drivers installed and i can see the battery icon and sound
but once the tablet ask me to restart everything disappears
am i doing anything wrong with installation ?
and is it possible to know which windows version you have ?
thanks again
Click to expand...
Click to collapse
To be honest, I don't know how to fix this problem and I forgot the Windows version (the tablet isn't mine), I'm sorry!
Is there any way to flash this tablet. I'm stuck with "Please insert the external storage media and press OK" after trying to flash it with windows 10 using its memorycard as bootable windows 10
George1971 said:
hi again ..
i have installed a clean windows 10 downloaded from internet
and i have done what you mentioned in the post
i managed to get all the drivers installed and i can see the battery icon and sound
but once the tablet ask me to restart everything disappears
am i doing anything wrong with installation ?
and is it possible to know which windows version you have ?
thanks again
Click to expand...
Click to collapse
now u can install any version of windows if its 32 bits I found its another source of driver,
W803T.rar
drive.google.com
this is directly by the thai company CSC and I've tested these drivers on Windows 10 X86 20H2
it works like a charm so now u can make use of this google drive link