Database Users

Installed MAGLDR.......

Hi guys,
I have a international HTC HD2 win6.5.
I have installed MAGLDR using these 2 post..........
http://www.addictivetips.com/mobile/how-to-boot-android-from-sd-card-of-htc-hd2-with-magldr/
http://www.addictivetips.com/mobile/what-is-magldr-and-how-to-install-and-use-it-on-htc-hd2/
When I boot up now it goes to the MAGLDR bootscreen; how do I make it boot to Windows 6.5?

I believe you don't, it wipes your nand memory so you can then either flash Android or WP7 to the internal memory.

OMG! I didn't know that, I thought it was another version of harret; booting up into harret instead of win6.5..........
hmmmmmm.............is there a win6.5 or win7 I can burn into NAND?

s050399b said:
OMG! I didn't know that, I thought it was another version of harret; booting up into harret instead of win6.5..........
hmmmmmm.............is there a win6.5 or win7 I can burn into NAND?
Click to expand...
Click to collapse
no.
you can have 6.5 with android on sd or wp7 with android on sd or nandroid. no dual-nand.

Thanks!
I would like to have original Win6.5 that comes with HTC HD2, is it available here?

Look at posts in Windows Mobile 6.5 ROM Development section. Especially http://forum.xda-developers.com/showthread.php?t=713977

just donwload the official rom from htc (you have it one their support site) and flash it trough your pc or trough SD card but if you flash it with SD it will Uninstal HSPL

I have just flashed Windows 7 into my NAND, and I want to revert back to Win6.5; How can I installed energy rom?
I tried running "Leo_SoftwareUpgrade.exe", after extracting the energy rom, and it says error, and quits.

metko said:
just donwload the official rom from htc (you have it one their support site) and flash it trough your pc or trough SD card but if you flash it with SD it will Uninstal HSPL
Click to expand...
Click to collapse
I can't flash it thru my PC now, as Windows 7 doesn't do activesnyc.........

this has been asked and answered countless times. it helps to read about how to undo what you are doing before you do it!
answer: simply flash your wm6.5 rom from your sdcard.

metko said:
just donwload the official rom from htc (you have it one their support site) and flash it trough your pc or trough SD card but if you flash it with SD it will Uninstal HSPL
Click to expand...
Click to collapse
It's not possible to flash thru the PC, somehow I can't even transfer files via PC.
How do I flash it thru SD?
I've downloaded it and it's "RUU_Leo_S_hTC_Asia_WWE_3.14.707.3_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship.exe"

Any progress?
Sent from my HTC Magic/Dream using XDA App

s050399b said:
It's not possible to flash thru the PC, somehow I can't even transfer files via PC.
How do I flash it thru SD?
I've downloaded it and it's "RUU_Leo_S_hTC_Asia_WWE_3.14.707.3_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship.exe"
Click to expand...
Click to collapse
did you do like ANY research or are you just doing something without knowing what the hell you are doing??
in the first place if you thought you could install MAGLDR and still have WinMo in your first place you probably didn't read anything
and concerning flashing that WinMo ROM back on your phone you might want to try and hit that search button because i've seen it hundreds of times explained exactly how to do it...

no progress.........
not sure what to do now...........the UI interface from MIUI current version is not what I am after
[ Before ]
- Official Win6.5 ROM + MIUI SD ROM from (http://forum.xda-developers.com/showthread.php?t=969661)
- but then he said he not support SD anymore
- so I thought of moving to MIUI on my phone
[ Now ]
- with MIUI directly, I find that I can't access my SD from PC
- UI not nice.......
I feel like moving to Win6.5 + MIUI on SD, I find that with these configuration, I can access everything via activesync, if I didn't like a particular Android on SD, I just remove it from SD and restore it easily............

XthelordinatorX said:
and concerning flashing that WinMo ROM back on your phone you might want to try and hit that search button because i've seen it hundreds of times explained exactly how to do it...
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=611433
didn't work; the 3 colored screen just sits there on serial.......
4) Uninstallation
Only way to remove the HSPL is to flash an original SPL from SD card.
- Take any "RUU_signed.nbh" from a ship ROM and copy it to SD card.
- Rename it to "leoimg.nbh"
- Reset the device while pressing the volume down button.

from this:
http://www.jayceooi.com/2011/01/01/how-to-upgrade-htc-hd2-rom-through-sd-card-video/
20. You should get ‘Red, Green, Blue and White’ screen with SPL-2.08.HSPL.
21. Let go volume down button when you see ‘loading…’.
22. Then ROM upgrade screen will be loaded.
I don't get to "21"...........it just sits on "Serial"............

Oh! Stupid me!
I am able to flashed to official ROM now;
[ STR ]
- connect USB
- restart phone and hold down "power" + "volume down"
- the boot menu should change to USB
- and wait for computer to install proper drivers for it
- THEN!! run RUU_Leo_S_hTC_Asia_WWE_3.14.707.3_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship.exe
I know the problem now, it's because I didn't wait for the computer to finish installing the drivers to communicate with phone

s050399b said:
Oh! Stupid me!
I am able to flashed to official ROM now;
[ STR ]
- connect USB
- restart phone and hold down "power" + "volume down"
- the boot menu should change to USB
- and wait for computer to install proper drivers for it
- THEN!! run RUU_Leo_S_hTC_Asia_WWE_3.14.707.3_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship.exe
I know the problem now, it's because I didn't wait for the computer to finish installing the drivers to communicate with phone
Click to expand...
Click to collapse
like i told you.. searching works

XthelordinatorX said:
like i told you.. searching works
Click to expand...
Click to collapse
Wrong!
Searching leads me to nothing....................
And I sit down thinking to myself; and slowly a bulb lights up!! Why am I so keen to use SD to flash...........and then voila~~

Wow glad everything's fine now. We need you in here to also help others with similar problem.
Great job. I been too busy since my last post in this thread. I was going to help you solve this problem but you the man.
Sent from my HTC HD2 using XDA App

[Q] Can't install WinMo...

Hi everyone...
I had for a very long time Android on my HD2 but now I want to install Stock WinMo and install an Android ROM clearly...
So I booted the device to the tri-colored screen and connected it to the pc BUT the phone doesn't check that it's connected (usally there stands 'SERIAL' and when it's connected it should show 'USB'). So I can't install the ROM...
Can anyone help me?
-the_hd2_cracker

the_hd2_cracker said:
Hi everyone...
I had for a very long time Android on my HD2 but now I want to install Stock WinMo and install an Android ROM clearly...
So I booted the device to the tri-colored screen and connected it to the pc BUT the phone doesn't check that it's connected (usally there stands 'SERIAL' and when it's connected it should show 'USB'). So I can't install the ROM...
Can anyone help me?
-the_hd2_cracker
Click to expand...
Click to collapse
hi
you can try sd card method...
Download stock Rom - shipped ... extract using 7-zip ( winrar etc) ... rename Ruu_Signed.nbh to LEOIMG.nbh ... format sd card ( fat 32)... copy leoimh.nbh in sd card put it in hd2 go into bootloader and follow instruction on screen.

ubejd said:
hi
you can try sd card method...
Download stock Rom - shipped ... extract using 7-zip ( winrar etc) ... rename Ruu_Signed.nbh to LEOIMG.nbh ... format sd card ( fat 32)... copy leoimh.nbh in sd card put it in hd2 go into bootloader and follow instruction on screen.
Click to expand...
Click to collapse
Thanks a lot!!!
It worked!

the_hd2_cracker said:
Thanks a lot!!!
It worked!
Click to expand...
Click to collapse
im glad for you
i have a question ... does usb connection works now ?

ubejd said:
im glad for you
i have a question ... does usb connection works now ?
Click to expand...
Click to collapse
not with my computer (win7) but with another (win vista)

I my opinion, you should not connect the USB cable befor be in tri-color-screen.
1.) power on the hd2 and go into the tri-color-screen, by hold pressing 'power off' button. There have to appear "serial"
2.) connect the usb cable with the hd2 and the pc
3.) windows show notify, that there is a new (unknown) device
4.) if the driver install fails, you should look for windows updates. the may requiered update is hidden at 'optional updates'. select this and install it.
5.) disconnect and connect the connection between hd2 and pc
If this does not work, you could try to install the 'htc sync' which is used for android. But I´m not sure, if this should help ...
If you are using an 64-Bit windows 7, the driver works in the attachment works fine
Alternatively use the drivers form this post:
http://forum.xda-developers.com/showthread.php?t=338473
Best regards

Huawei Ideos X5 don't start

Hello,
can someone help me? I've mounted the device in pink screen to my computer (Linux) an then I deleted all drives only the image folder I don't delete. I only replace the recovery.img file.
Can anyone help me?
Best regards and thank you for help
schuessm

schuessm said:
Hello,
can someone help me? I've mounted the device in pink screen to my computer (Linux) an then I deleted all drives only the image folder I don't delete. I only replace the recovery.img file.
Can anyone help me?
Best regards and thank you for help
schuessm
Click to expand...
Click to collapse
Try to put recovery.img from here http://forum.xda-developers.com/showthread.php?t=1288223.......
just check if image folder contains all necessary files other than recovery.img.

thank you krish_nank,
I do not touch any files on the image partition. the main problem is, that my phone doesn't do anything and so I can't mount the device and drives. When I connect the phone to the charger it doesn't charge, the LED doesn't light up. I can't go to the pink screen. Is there any way to connect the phone when it is offline? Or is there any hard reset function.
Thank you!
Bye
schuessm

schuessm said:
thank you krish_nank,
I do not touch any files on the image partition. the main problem is, that my phone doesn't do anything and so I can't mount the device and drives. When I connect the phone to the charger it doesn't charge, the LED doesn't light up. I can't go to the pink screen. Is there any way to connect the phone when it is offline? Or is there any hard reset function.
Thank you!
Bye
schuessm
Click to expand...
Click to collapse
Try to keep mobile connected to PC via USB for few minutes then try to go to Pink screen mode.......

Hello krish_nank,
I try everything, but no way the LED doesn't light up neither with the charger nor with the PC. But I'll try it again in the evening.
Any other ideas?
Thank you for your help
Greeting
schuessm

Now chance to work with the device. I sent it to the service.

schuessm said:
I've mounted the device in pink screen to my computer (Linux) an then I deleted all drives only the image folder I don't delete.
Click to expand...
Click to collapse
That's really stupid. Why do you do that without a backup?

Thank you But I've a backup, but I can't use it when the device doesn't start or is there a way to get access on an device wich isn't switch on?
Best regards
schuessm

schuessm said:
Thank you But I've a backup, but I can't use it when the device doesn't start or is there a way to get access on an device wich isn't switch on?
Click to expand...
Click to collapse
What's happended, when you connect your phone over usb to your computer?
What kind of backup do you have?
How did you do the backup?
Can you see some drives in your filemanager?
Let me explain. When I connect my unrooted phone to my computer, I see 5 drives. In the attached picture you can see the important drives and its filesystems. Please have a look at column "Einhängepunkt" to see it.
Perhaps this URL will you help a bit.
http://android.modaco.com/topic/341011-ultimate-guide-to-the-huawei-u8800/
2) Turn on your phone while holding VOL+ and VOL- (should come up with pink/purple screen)
Click to expand...
Click to collapse
Are you able to reach the pink/purple screen?
Have you tried taking the battery out?
Best regards,
Ponder

Hello Ponder Stibbons,
I can't turn on my u8800, that's my problem and that's the reason why I sent it to the service. I've backup 1:1 copy of the drives and one backup from recovery mode. There is no response when I connect the phone to the pc. When I connect there is no LED light on the same with charger. I dont know why but I think its a hardware problem. I've a second android handy, the samsung galaxy spica and I've no problems with this device and I've root it with many mods. what I'll say I'm not a beginner with root and mod an android device. I'll talk about the error when I#ve back my device from the service.
So long and thank you.
Best regards
schuessm

Hello all,
I've got the information from service, that the mainboard of the phone was changed ;-)
Best regards
schuessm

[Q] installing android on my htc hd2

can some one help me install this [02.07.2012[MAGLDR][SD]MIUI ICS 2.6.29[Tytung HWA R3.2] because i find it very hard and im a real nooooob
here is the link im on htc hd2 windows 6.5
http://forum.xda-developers.com/show....php?t=1504369

link broken, , heres a fixed one
http://forum.xda-developers.com/showthread.php?t=1504369

1. Download the file from the thread
2. Extract the file on your desktop and you will get a folder with the same name
3. Copy this folder with WinMo explorer to anywhere on your SD Card
4. Go to the folder where you copied this folder and open/tap on it.
5. You will see a folder called MIUI
6. Copy/Cut this folder by using menu - manage - copy, etc
7. Go to the root of your SD card and paste it there.
8. Open WinMo explorer and go to storage card\ics
9. Press clrcad (nothing happens) and thereafter on Haret
10. Android will be booted on your device. Let it boot and after that reboot 3 times to give it the opportunity to build all the extra folders on your SD Card you need.
Hope this helps

wis1152 said:
1. Download the file from the thread
2. Extract the file on your desktop and you will get a folder with the same name
3. Copy this folder with WinMo explorer to anywhere on your SD Card
4. Go to the folder where you copied this folder and open/tap on it.
5. You will see a folder called MIUI
6. Copy/Cut this folder by using menu - manage - copy, etc
7. Go to the root of your SD card and paste it there.
8. Open WinMo explorer and go to storage card\ics
9. Press clrcad (nothing happens) and thereafter on Haret
10. Android will be booted on your device. Let it boot and after that reboot 3 times to give it the opportunity to build all the extra folders on your SD Card you need.
Hope this helps
Click to expand...
Click to collapse
i done that but it freezes

konnan1 said:
i done that but it freezes
Click to expand...
Click to collapse
The folder you unzip to your desktop will be called Miui ics 2.6.29 inside that folder is a folder called MIUI,this is the folder yu need to copy to sd card Now follow the rest of the steps

Upgrade your radio to 2.15 and you should be good to go.

Marvlesz said:
Upgrade your radio to 2.15 and you should be good to go.
Click to expand...
Click to collapse
how do i do that im a real noob

konnan1 said:
how do i do that im a real noob
Click to expand...
Click to collapse
yea searched it up but when i go on the boot screen it stays on serial it never goes to usb

You need Windows Mobile Device Centre (or ActiveSync, depending whether you're on XP or Win7). You'd also need to have HSPL installed in order to be able to update your radio.
You know what, since you're a real noob , just download an official winmo rom (must be latest version 3.14) and follow the instructions, and it will automatically install the latest radio. (I think you'd need WMDC or ActiveSync here as well.)

Marvlesz said:
You need Windows Mobile Device Centre (or ActiveSync, depending whether you're on XP or Win7). You'd also need to have HSPL installed in order to be able to update your radio.
You know what, since you're a real noob , just download an official winmo rom (must be latest version 3.14) and follow the instructions, and it will automatically install the latest radio. (I think you'd need WMDC or ActiveSync here as well.)
Click to expand...
Click to collapse
i have tried it but the program dosent reconise my device

konnan1 said:
i have tried it but the program dosent reconise my device
Click to expand...
Click to collapse
put phone in bootloader (stripey screen)
check that spl line says x.xx.hspl - it must say .hspl and not .0000
connect usb
when serial --> usb run the radio flash.

samsamuel said:
put phone in bootloader (stripey screen)
check that spl line says x.xx.hspl - it must say .hspl and not .0000
connect usb
when serial --> usb run the radio flash.
Click to expand...
Click to collapse
the white bit only says serial but when i plug the usb in it dosent say usb

Take a look here
http://forum.xda-developers.com/showthread.php?t=1402975
Good luck
Sent from my HTC HD2 using xda premium

konnan1 said:
the white bit only says serial but when i plug the usb in it dosent say usb
Click to expand...
Click to collapse
He meant in bootloader tri color screen. Power of hd2, power on device and imediatly hold volume down button.

maneken25 said:
He meant in bootloader tri color screen. Power of hd2, power on device and imediatly hold volume down button.
Click to expand...
Click to collapse
yes i no but it never says usb at the bottom of the screen

konnan1 said:
yes i no but it never says usb at the bottom of the screen
Click to expand...
Click to collapse
You need windows mobile centre for your version of windows, it doesn't show usb cause you don't have installed drivers so it can't recognise

maneken25 said:
You need windows mobile centre for your version of windows, it doesn't show usb cause you don't have installed drivers so it can't recognise
Click to expand...
Click to collapse
so i just need to download windows mobile centre

konnan1 said:
so i just need to download windows mobile centre
Click to expand...
Click to collapse
but i got a windows 7 laptop
i dont understand!!!!!

konnan1 said:
but i got a windows 7 laptop
i dont understand!!!!!
Click to expand...
Click to collapse
Windows mobile device center is software not Operating system, do googling a little from where and which version is for you.
Also you can try to install htc sync software if windows mobile device center doesn't help.
You are installing this so that your device can be recognised from pc when you are in bootloader.
Hd2 forum section have alot guides post.
You need to start using search button and reading posts on hd2 forum whole or under android section.
Why im saying this... When you start using hd2 in new way like flashing new radio or hspl.
Yoully be constantly confused what happens with your hd2 or how to do something which allready written multiple times on forum.
And lets not forget if you dont know what are you doing, you can screw up your phone.
There isnt easy solution except searching hd2 forum reading and reading.

As posted above, searching and reading will inevitably let you find all of the answers you're looking for. Also, when a guide says install x, y or z and lists it as a compulsory step, don't question it. Just do it. It will seriously save you a tonne of effort (as will using the search button) in the future.
Sent from my NexusHD2

[GUIDE] SmartQ Z1 Lite unbrick / fix bootloop

Hi guys, I saw that so much people have problem with SmartQ Z1 Lite. However, after few days watch becomes slow and it just have bootloop. I had same problem for weeks, until I found a way to fix it.
Notice! This tutorial is for LITE verrsion only, full version have it's own unbrick tool.
- Download the tools from attachment (end of thread)
- Make new folder on desktop and extract the downloaded .zip to that folder
1. STEP Entering the nexus
- Turn off the watch, make sure that is completely off (plug in the usb cable and check if your machine detects it)
- After that plug in usb cable and press the Power and Back button on watch together for few seconds, your PC will detect it as USB boot device or something
- Go to device manager and right click on that device and update driver software, browse computer and then Let me pick the button..
Click on All devices and then Have disk, browse to the tool folder and 32/64 bit usb driver and choose ini file
Install that driver.
- Unplug usb cable
2. STEP Preparing the savior
- Open TabControl.exe and right click on anywhere on tool, and then click Config
- Click on Import config and find the folder you extracted tool, then folder "ini" and choose the Jz4775--Nand-FINAL.ini
- Then click Manual config and where is uboot on the right "..." browse for the x-boot-nand.bin
- For uimage choose recovery.img
- And then click OK, and don't save the config
3. STEP Let the battle begins
- Plug in USB cable and the tool should start flashing new recovery
- Wait few minutes and it should write Successfull
- After that watch should turn off, unplug and plug in cable again
- Hold the power button for few seconds until you get a charging interface, press back button and hold, and then power button and hold untill it vibrates
- You should see factory upgrade interface and new removable disc should be in computer
- Copy the update.zip from required_flash_files/ folder to new removable disc.
- Now press the back button, and then again where is "Upgrade", your watch should get upgraded
Aaand voilaa!
DOWNLOAD
https://mega.co.nz/#!YBhzyJoY!yfIpdySc_NQDaBHEBPB0kY1yn81IxpKQzARO3B2U1OQ

i need a mirror link

Somebody do this?
is it working?

csonti02 said:
Somebody do this?
is it working?
Click to expand...
Click to collapse
I've sent you the mirror, as soon as i get more posts, i'll edit the thread with mirror.

link
https: //mega.co.nz/#!YBhzyJoY!yfIpdy...pKQzARO3B2U1OQ
HarisDev said:
I've sent you the mirror, as soon as i get more posts, i'll edit the thread with mirror.
Click to expand...
Click to collapse
---------- Post added at 10:26 PM ---------- Previous post was at 10:08 PM ----------
it is working. I try many times (3) but after working (write sacesfull) after i updated 1.5 and work.
many thanks.
csonti02 said:
https: //mega.co.nz/#!YBhzyJoY!yfIpdy...pKQzARO3B2U1OQ
Click to expand...
Click to collapse

Please send me a mirror I have had my watch shelved since March. You've just given me new hope.

siakgayyem said:
Please send me a mirror I have had my watch shelved since March. You've just given me new hope.
Click to expand...
Click to collapse
https://mega.co.nz/#!YBhzyJoY!yfIpdy...pKQzARO3B2U1OQ

Wow this method works. thank you very much. My watch has successfully booted at last since it started to bootloop last march. Harisdev you are a miracle worker. Csonti02 thanks for the link. Both you guys saved me a lot of money (which I dont have much) I was already contemplating on returning the watch to china for repairs. I can not thank you enough.

siakgayyem said:
Wow this method works. thank you very much. My watch has successfully booted at last since it started to bootloop last march. Harisdev you are a miracle worker. Csonti02 thanks for the link. Both you guys saved me a lot of money (which I dont have much) I was already contemplating on returning the watch to china for repairs. I can not thank you enough.
Click to expand...
Click to collapse
the wizard is harisdev ))))) thanks.

Yay.. glad to see that this helped to you guys.
If anyone needs help, feel free to post reply.

Perfect work! Now hold still trying to get to work with the latest update.
Any help for that i cannot get bluetooth on in lite ?

Tohelo said:
Perfect work! Now hold still trying to get to work with the latest update.
Any help for that i cannot get bluetooth on in lite ?
Click to expand...
Click to collapse
Hi Tohelo, thanks.
Try to download update.zip version 1.3 from official site (Click here!) and update by system upgrade. If u don't know how to, please tell me so I can write tutorial.

HarisDev said:
Hi Tohelo, thanks.
Try to download update.zip version 1.3 from official site (Click here!) and update by system upgrade. If u don't know how to, please tell me so I can write tutorial.
Click to expand...
Click to collapse
Yeah I've done that and the installation is successful but now I have a problem that I can not get bluetooth turned on

Tohelo said:
Yeah I've done that and the installation is successful but now I have a problem that I can not get bluetooth turned on
Click to expand...
Click to collapse
I will see tomorrow, i have some tasks to do..

really need help
HarisDev said:
Hi guys, I saw that so much people have problem with SmartQ Z1 Lite. However, after few days watch becomes slow and it just have bootloop. I had same problem for weeks, until I found a way to fix it.
Notice! This tutorial is for LITE verrsion only, full version have it's own unbrick tool.
- Download the tools from attachment (end of thread)
- Make new folder on desktop and extract the downloaded .zip to that folder
1. STEP Entering the nexus
- Turn off the watch, make sure that is completely off (plug in the usb cable and check if your machine detects it)
- After that plug in usb cable and press the Power and Back button on watch together for few seconds, your PC will detect it as USB boot device or something
- Go to device manager and right click on that device and update driver software, browse computer and then Let me pick the button..
Click on All devices and then Have disk, browse to the tool folder and 32/64 bit usb driver and choose ini file
Install that driver.
- Unplug usb cable
2. STEP Preparing the savior
- Open TabControl.exe and right click on anywhere on tool, and then click Config
- Click on Import config and find the folder you extracted tool, then folder "ini" and choose the Jz4775--Nand-FINAL.ini
- Then click Manual config and where is uboot on the right "..." browse for the x-boot-nand.bin
- For uimage choose recovery.img
- And then click OK, and don't save the config
3. STEP Let the battle begins
- Plug in USB cable and the tool should start flashing new recovery
- Wait few minutes and it should write Successfull
- After that watch should turn off, unplug and plug in cable again
- Hold the power button for few seconds until you get a charging interface, press back button and hold, and then power button and hold untill it vibrates
- You should see factory upgrade interface and new removable disc should be in computer
- Copy the update.zip from required_flash_files/ folder to new removable disc.
- Now press the back button, and then again where is "Upgrade", your watch should get upgraded
Aaand voilaa!
My watch is working and everynotification works but theres a problem where it says the application smartwatchlauncher stopped workig so i cant do anything including accessing settings but i get notifications and i cannot upgrade how will i fix this
Click to expand...
Click to collapse

http://www.smartdevices.com.cn/support/download/Zwatchqc/FirmWare/z1litev1.5.html
Download this and flash update.zip

its asking for a decryption key what is it also my computer wont dowload the other one because it says it a virus

Hi,
I'm having trouble in the last point of the first step.
I can only choose inf files, not ini files.
I am pretty sure i am following the steps right but i get stuck on that part.

HarisDev said:
Yay.. glad to see that this helped to you guys.
If anyone needs help, feel free to post reply.
Click to expand...
Click to collapse
Hi,
I'm having trouble in the last point of the first step.
I can only choose inf files, not ini files.
I am pretty sure i am following the steps right but i get stuck on that part.