Database Users

What did I do to my new LEO????

Well I got my new Leo 13 days ago and I've tried to make the stock ROM work to my satisfaction but between the T-Mo junk installed and terrible battery life I decided it was time to try a cooked ROM...
So I read and read and read some more...It's not my first run at this but I wanted to understand everything so I didn't end up with a $449 paperweight.
This morning I download and installed the HSPL-1024....No problems, went just as the instructions said....
I then download a 1024 T-Mo tested/approved Energy Rom and I install it on my LEO.... No problem everything went as it should. I played with the rom and wanted to try another one with a different look so I found another 1024 LEO Rom, the RoMEoS4 or something like that.... Anyway, that install went just fine...
After installing both cooked ROMS I noticed I was having freezing/locking up issues and had to keep soft reseting so after several hours of it locking up I decided to just revert back to the stock T-Mo USA rom.
I then went on here and found the exact shipped rom I had originally (I had documented the versions I had prior to HSPL and the cooked rom's)
http://beta.vbnfiles.com/index.php?...08.50.08_2_Ship.zip&directory=xmoo/Leo/TMOUS&
Instructions on here clearly explained how to revert back (for warranty purposes) so I downloaded the exact stock rom, extracted it to my desktop and renamed the nbh file leoimg.nbh.... I then copied it to a formatted 8gb SDcard and inserted it into the phone.
Instructions said to hold the Volume down botton and the Power button until it boots into the bootloader and then begins to install off the card. I did this exactly and shortly after it began loading off the card it went back to the bootloader and said "Upgrade Rom Code Error, Please try again" it then goes to a gray screen that says "Loading" and stays there...stuck.
Here's a video of what it does when I try to load off the sdcard.....
http://www.youtube.com/watch?v=eCD_-EuI1_Q
I have no idea what happened or what to do to get it out of this...
Thanks for your time!
Jess
http://i16.photobucket.com/albums/b4/jessepatty/DSC00314.jpg

Put it into bootloader mode, hook it up to your computer with USB, and run to stock image like you did with the cooked roms. That should flash it back to stock. Then, if you want to take the hspl off, you can just run the hspl program again and change it back to your lod spl. No need to use SD card.

Every time a thread like this pops up, I can't help but wish that the "flash from SD card" method and every reference to it could be eradicated from the collective consciousness of this forum and all unwitting participants who fall into this trap... at least long enough to establish that:
1) it isn't a necessary or preferred method to flash.
2) it has the potential to cause stuff like this to happen.

zarathustrax said:
Put it into bootloader mode, hook it up to your computer with USB, and run to stock image like you did with the cooked roms. That should flash it back to stock. Then, if you want to take the hspl off, you can just run the hspl program again and change it back to your lod spl. No need to use SD card.
Click to expand...
Click to collapse
I've tried that several times and it loads the HTC screen but the screen never does anything...stays on 0%

donalgodon said:
Every time a thread like this pops up, I can't help but wish that the "flash from SD card" method and every reference to it could be eradicated from the collective consciousness of this forum and all unwitting participants who fall into this trap... at least long enough to establish that:
1) it isn't a necessary or preferred method to flash.
2) it has the potential to cause stuff like this to happen.
Click to expand...
Click to collapse
I got those instructions from a very popular chef on here so I was under the assumption that was the only way to revert back from HSPL
I've learned a valuable lesson here.....Leave it the hell alone!!!!
I'm sweating bullets right now....
http://forum.xda-developers.com/showpost.php?p=6162635&postcount=86

If you can get to the boot loader, then you should be able to fix this pretty easily.
I'd do this:
Get to the boot loader, check the SPL version. Do you have HSPL 2.08?
IF no, install it using HSPL2_1024_RUN, (if you want a custom ROM option), or install the standard SPL if you want to have an "unhacked" HD2, and flash the stock ROM. Done.
IF HSPL 2.08 is installed and you want it like that to install custom ROMs, then I'd do the following, just for good measure:
run MTTY/task29 to clean out all the old stuff (see my sig line)
flash the TMOUS 2.08 Radio
flash a custom TMOUS compatible ROM

jessepatty said:
I got those instructions from a very popular chef on here so I was under the assumption that was the only way to revert back from HSPL
I've learned a valuable lesson here.....Leave it the hell alone!!!!
I'm sweating bullets right now....
http://forum.xda-developers.com/showpost.php?p=6162635&postcount=86
Click to expand...
Click to collapse
No, the new version of HSPL (HSPL2_1024_RUN) has an option to re-install the standard SPL. If I wanted to do that, i'd definitely use HSPL2_1024_RUN to do it.

donalgodon said:
If you can get to the boot loader, then you should be able to fix this pretty easily.
I'd do this:
Get to the boot loader, check the SPL version. Do you have HSPL 2.08?
IF no, install it using HSPL2_1024_RUN, (if you want a custom ROM option), or install the standard SPL if you want to have an "unhacked" HD2, and flash the stock ROM. Done.
IF HSPL 2.08 is installed and you want it like that to install custom ROMs, then I'd do the following, just for good measure:
run MTTY/task29 to clean out all the old stuff (see my sig line)
flash the TMOUS 2.08 Radio
flash a custom TMOUS compatible ROM
Click to expand...
Click to collapse
Ok thank you....
The SPL reverted back to the original 2.08 SPL when it began the install the stock rom (before it gave me the error) So it does not have the HSPL in it anymore.
I've tried all kinds of different things to fix it but I get an error or no response with everything.
I did try to reinstall the HSPL but when I try I get the below error from the HSPL2 proggie.
Critical Error
Flow 00000003
Error Code 00000004
Discription: BAD MODEL ID
so reinstalling HSPL wont reinstall.....
I believe this is why I've not been able to fix it myself.... I'm usually pretty good with these installs. My Kaiser saw hundreds of new roms if not more and I never ran into this.
Thanks

jessepatty said:
I've tried that several times and it loads the HTC screen but the screen never does anything...stays on 0%
Click to expand...
Click to collapse
Make sure you have the sd card out of the phone. So you get into bootloader mode, and you run the rom update from the computer? Maybe try downloading the stock rom again to make sure it's not corrupted. You should be able to flash it from your computer.

Before flashing any rom I would do task29 and completely wipe the internal memory, so you don't have any issues with left over files from the last rom. That is most likely why you started having problems in the first place. I used to think oh I can just flash a rom and it will work like new, but nope I had more problems I could deal with and almost returned the damn thing. Once you know what you are doing WM is a great OS to have and the only other phone I thought even cam eclose toa WM phone was the iPhone anyG, if i'm allowed to say that here. So, task29 first then enter bootloader and the run your customruu with any rom compatible with the TMOUS HD2 1024. Any questions just holla.

jessepatty said:
Ok thank you....
The SPL reverted back to the original 2.08 SPL when it began the install the stock rom (before it gave me the error) So it does not have the HSPL in it anymore.
I've tried all kinds of different things to fix it but I get an error or no response with everything.
I did try to reinstall the HSPL but when I try I get the below error from the HSPL2 proggie.
Critical Error
Flow 00000003
Error Code 00000004
Discription: BAD MODEL ID
so reinstalling HSPL wont reinstall.....
I believe this is why I've not been able to fix it myself.... I'm usually pretty good with these installs. My Kaiser saw hundreds of new roms if not more and I never ran into this.
Thanks
Click to expand...
Click to collapse
You should be able to install the T-Mobile Stock rom without needing HSPL I think. Make sure it's the stock rom you have... not a modified or cooked version.

jessepatty said:
Ok thank you....
The SPL reverted back to the original 2.08 SPL when it began the install the stock rom (before it gave me the error) So it does not have the HSPL in it anymore.
I've tried all kinds of different things to fix it but I get an error or no response with everything.
I did try to reinstall the HSPL but when I try I get the below error from the HSPL2 proggie.
Critical Error
Flow 00000003
Error Code 00000004
Discription: BAD MODEL ID
so reinstalling HSPL wont reinstall.....
I believe this is why I've not been able to fix it myself.... I'm usually pretty good with these installs. My Kaiser saw hundreds of new roms if not more and I never ran into this.
Thanks
Click to expand...
Click to collapse
I wouldn't give up hope, but.... Worst case: You don't have HSPL installed, so your warranty is still good! Not the best news, I realize.

donalgodon said:
No, the new version of HSPL (HSPL2_1024_RUN) has an option to re-install the standard SPL. If I wanted to do that, i'd definitely use HSPL2_1024_RUN to do it.
Click to expand...
Click to collapse
Yeah that's what I used to put the HSPL in it. It's giving me the Critical error now.
I'll search a copy of MTTY and see if it does anything...I don't have a copy of mtty.

zarathustrax said:
Make sure you have the sd card out of the phone. So you get into bootloader mode, and you run the rom update from the computer? Maybe try downloading the stock rom again to make sure it's not corrupted. You should be able to flash it from your computer.
Click to expand...
Click to collapse
Thank you, Yes I took it out when it wouldnt load the stock rom off it.
There is no SIM or SD card in it.
No, it's not installing via my computer.....It's still sitting at 0% and been there since I began typing this thread... (30 mins) I thought I may have gotten a bad download so I've re-downloaded the stock rom twice now and still the same thing.... Sits at zero percent.

zarathustrax said:
You should be able to install the T-Mobile Stock rom without needing HSPL I think. Make sure it's the stock rom you have... not a modified or cooked version.
Click to expand...
Click to collapse
Here's where I got the stock rom.... Last link in the 1st post.
http://forum.xda-developers.com/showpost.php?p=6042320&postcount=1
I got the second one elsewhere on XDA but I can't recall where.

If you can get your phone into bootloader then just do task29. Here is the Mega link.
http://www.megaupload.com/?d=J3OELQ8I
Once task29 is done, pull your battery out and replace after 10-15 secs. Then enter bootloader again and try the stock or custom rom you want. I have been at the 0% screen before even 70% and 99% and stuck. Mine is the HTC HD2 TMOUS branded and I am currently using the AxLor Leo V9 rom and she works like a dream. Let me know if you need help.

jessepatty said:
Discription: BAD MODEL ID
so reinstalling HSPL wont reinstall.....
Click to expand...
Click to collapse
just to double check something, you keep referring to hspl2, and you get bad model ID,, you know hspl2 and hspl1024 are different progs? I'm assuming you have a tmous? you arent trying to run the wrong hspl in your haste/panic are you?

jessepatty said:
Here's where I got the stock rom.... Last link in the 1st post.
http://forum.xda-developers.com/showpost.php?p=6042320&postcount=1
I got the second one elsewhere on XDA but I can't recall where.
Click to expand...
Click to collapse
ahh ok, that IS the stock rom, but its a repack of the 2.1 rom, not an official .exe/nbh pack. (Well, my kitchen wont import it, says its not official, and it comes with customruu)
However, look for
RUU_Leo_1_5_TMOUS_2.10.531.0_Radio_Signed_15.34.50.07U_2.08.50.08_2_Ship
which is the packed ship .exe. (and does open as official in the kitchen)
ill submit this, and see if i can find the link.
EDIT - heres a mirror of
RUU_Leo_1_5_TMOUS_2.10.531.0_Radio_Signed_15.34.50.07U_2.08.50.08_2_Ship.exe
http://forum.xda-developers.com/showpost.php?p=5688401&postcount=159
good luck

samsamuel said:
just to double check something, you keep referring to hspl2, and you get bad model ID,, you know hspl2 and hspl1024 are different progs? I'm assuming you have a tmous? you arent trying to run the wrong hspl in your haste/panic are you?
Click to expand...
Click to collapse
I am glad you pointed out this error on my part. I honestly did not know that HSPL2 and HSPL1024 were 2 different programs....
I was merely referring to HSPL1024 as the second version of HSPL....or HSPL2..... I didn't mean to create confusion... sorry about that...
To confirm I am using HSPL-1024
Jess

donalgodon said:
Every time a thread like this pops up, I can't help but wish that the "flash from SD card" method and every reference to it could be eradicated from the collective consciousness of this forum and all unwitting participants who fall into this trap... at least long enough to establish that:
1) it isn't a necessary or preferred method to flash.
2) it has the potential to cause stuff like this to happen.
Click to expand...
Click to collapse
so I'm kinda confused...you say that that you shouldn't flash from the sd card. and im sure you know more about this technically speaking than I do but what confuses me is I've been told and read MANY times by people probably more experience than both of us that flashing from your sd card IS the safest way to flash...im not saying your wrong but it concerns me because that is the method I use mainly for convience.but if this has the potential to destroy my very expensive device that I can't afford to replace I would REALLY like to know and know why. if anybody can guide me here why two different stories and maybe some reasons why one method had a higher chance for problems I would really appreciate it =)

Never been flashed

Hi all
I se a T-Mobile HD2. Although I've used winmo for years its only recently I've discovered the wonder of custom roms. Before I was a bit chicken at doing anything that heavy as I did not want to brick my phone but now I've read up as much as I can on it and I'm confident that I can now flash hspl and a new rom to my device. However....
I have updated my HD2 to the latest T-Mobile ROM and I have read that the new ROM cannot accept hspl. Is this true and if so, what can I do about it?
Many thanks in advance!

Just write up a sign saying, "Flash if you love [insert things a girl would love]" and put it up on your car window when you drive next to a car driven by an attractive woman.
Easy peasy lemon squeezy.
But if it's t-mous hd2, hspl2 is one you should look into, not hspl.

spfraggle said:
Hi all
I se a T-Mobile HD2. Although I've used winmo for years its only recently I've discovered the wonder of custom roms. Before I was a bit chicken at doing anything that heavy as I did not want to brick my phone but now I've read up as much as I can on it and I'm confident that I can now flash hspl and a new rom to my device. However....
I have updated my HD2 to the latest T-Mobile ROM and I have read that the new ROM cannot accept hspl. Is this true and if so, what can I do about it?
Many thanks in advance!
Click to expand...
Click to collapse
True and false.
You must downgrade back to 2.10 which gives you a SPL of 2.08. Luckily someone has posted a thread on how to do this and it is quite easy.
First your going to go to this thread
http://forum.xda-developers.com/showthread.php?t=691779
This will explain how to downgrade from 2.13 to 2.10.
Once you have downgraded you will want to check that your SPL has been downgraded also by booting into bootloader (Hold vol down+power)
Once you have this you can download the HSPL2 Program which can be found here.
After you follow that you will then have an HD2 with HSPL.
To flash a custom rom this guide is a great one to follow.
FYI. Make sure you only flash roms that say they are for TMOUS and only stock roms higher than 2.08 and do not flash radios with .51 AT ALL
Basically gave you all the guides to keep you safe to flash. Quite easy once you get a hold of it.
Edit: Also never flash a stock rom via MicroSD that has a SPL attached to it as it will overwrite your SPL2 and you will no longer be able to HSPL your SPL

rlacsamana1989 said:
Once you have this you can download the HSPL2 Program which can be found here Make sure you download HSPL2_RUN (second file on the dowload list on that guide)
Click to expand...
Click to collapse
wrong. hspl 2, the second one in that thread won't work on tmous. you need hspl_2_1024 (hspl1024 for short) which is on page 990 of that thread. (or see my sig for a link)

samsamuel said:
wrong. hspl 2, the second one in that thread won't work on tmous. you need hspl_2_1024 (hspl1024 for short) which is on page 990 of that thread. (or see my sig for a link)
Click to expand...
Click to collapse
sorry thought I switched that last night before I went to bed. Its fixed now so its all good. Thanks for that

Thanks for all the help. So far I have gone back to my old tmo rom and installed hspl. I've also looked through for some ROMs I like and when I downloaded the one I wanted to use, it saved a .rar file. What is a rar file and how do I run it?

spfraggle said:
Thanks for all the help. So far I have gone back to my old tmo rom and installed hspl. I've also looked through for some ROMs I like and when I downloaded the one I wanted to use, it saved a .rar file. What is a rar file and how do I run it?
Click to expand...
Click to collapse
A rar file is a compressed file like a .zip , use winrar to uncompress it ...
just google .rar or winrar ....

I like using Rarzilla. Its free and it extracts the files as simple as right clicking the file and choosing RarZilla and it goes to work.

I cannot thank everyone enough. After following all the instructions to the letter I have now flashed my first rom. I have a few other questions:
The rom didn't come with the IM program that was on the tmo stock rom. Is there anywhere I can get that?
If I want to return to the original tmo rom (for warranty purposes) do I just load it up from the storage card liike I did when I went back to it before flashing to hspl?
And if I want to change to another custom rom, do I have to remove the one I have first before flashing to a new one or just flash it onto my device and it replaces the old one?

spfraggle said:
The rom didn't come with the IM program that was on the tmo stock rom. Is there anywhere I can get that?
Click to expand...
Click to collapse
Not sure about that, but i would expect there is a thread somewhere with all the packages.
At a long shot the 'ext' package can be converted into a cab.
Do some hunting.
If I want to return to the original tmo rom (for warranty purposes) do I just load it up from the storage card liike I did when I went back to it before flashing to hspl?
Click to expand...
Click to collapse
no need for storage card flashing at all nowadays.
run hspl3, choose 2.08.0000
now, because the spl is stock, when you run the 2.13 rom exe, it will flash over usb and reset the rom, radio and spl to stock.
And if I want to change to another custom rom, do I have to remove the one I have first before flashing to a new one or just flash it onto my device and it replaces the old one?
Click to expand...
Click to collapse
It is recommended to do task29 between different roms. This formats the memory area where the rom is stored. (Think formatting your system disk on your PC before installing a fresh OS)
However, if you are trialling a lot of roms in quick succession, task 29 isn't actually necessary, but you are more likely to get odd bugs creep in after a while, so it's a good habit to get into.

[Question] Stuck at boot...

Hello, I am stuck at my boot screen after installing HSPL, then MAGLDR, then Leo Radio and last ClockWorkRecovery for HD2.
Is my phone still savable as long as I can boot into my boot menu?
Not even sure what went wrong, did everything right but it didn't boot already after the: "We hacked it" or something.

So what i understand is that you installed HSPL 2.08, then MAGLDR 1.13, then you installed a Radio, what HD2 do you have and what radio did you get?

KShion619 said:
So what i understand is that you installed HSPL 2.08, then MAGLDR 1.13, then you installed a Radio, what HD2 do you have and what radio did you get?
Click to expand...
Click to collapse
My radio is: "R 2.07.51.22_2".
The SPL was 1.42.0000, now it's SPL-2.08.

Unscrewed said:
My radio is: "R 2.07.51.22_2".
The SPL was 1.42.0000, now it's SPL-2.08.
Click to expand...
Click to collapse
Try installing 2.15.50.14 radio.

ahmadfini said:
Try installing 2.15.50.14 radio.
Click to expand...
Click to collapse
So only the radio or re-do all the steps?

Unscrewed said:
So only the radio or re-do all the steps?
Click to expand...
Click to collapse
Do a Task29, reinstall hspl, install radio then magldr.
So yeah redo the steps but in this order

It works like a charm now!
Thank you so much!
One last question, though (if I'm allowed to ask?).
If I download this SD Rom, and put it on my SD Card:
http://forum.xda-developers.com/showthread.php?t=1681906#2
And then go into CWRecovery -> Install .zip from SD Card -> Choose .zip from SD Card -> cm9_update_20120822.zip -> Yes - Install
This will happen:
Finding update package...
Opening update package...
Installing update...
Installation aborted.
Click to expand...
Click to collapse
EDIT: Same happens for: http://forum.xda-developers.com/showthread.php?t=1792680

To run a SD Rom you extract it onto the root of ur SD Card (take it out of the folder) then in magldr just choose to boot from SD card.
Please click on the thanks button if i helped

Thanks so much!
I thanked you in two posts!
Also, if I install a NAND Package using CWRecovery, it tells me it succesfully installed the package, but it still boots to MAGLDR when I boot up the phone...
...is there a way to fix that too?

Thank you
If you want it to automatically boot then go to options in magldr and select boot AD NAND, if not you can just select boot AD NAND in the magldr window.

It tells me there are no boot sources while it said:
"Installed succesfully"
"Please reboot"
EDIT: Also, when I wipe my cache or anything it tells me it can't find /misc/ or anything...
please, I am so confused..
And when I boot from SD (with SD Rom) it gets stuck at the very first loading screen and reboots...
Is something wrong with my phone?
(Also, I didn't redo all the steps, I just flashed the radio and it seems to work, do I need to redo every step still for it to work right?)

Did you partition your system and sd card?
If not look n the thread of where you found the rom and see what syste partion it needs.

Wait, could you maybe please add me on Skype?
nathan_frissen
I am really confused now. ;(

Ive added you, you still havent accepted

I had this issue once before, I realized it was because I didn't re-partition as I was meant to. Try downloading the HD2 Toolkit and double checking in the thread you downloaded the NAND from about the partition sizes and use the Toolkit to partition it.
Hope I helped mate

same problem
Unscrewed said:
Hello, I am stuck at my boot screen after installing HSPL, then MAGLDR, then Leo Radio and last ClockWorkRecovery for HD2.
Is my phone still savable as long as I can boot into my boot menu?
Not even sure what went wrong, did everything right but it didn't boot already after the: "We hacked it" or something.
Click to expand...
Click to collapse
same problem

[Q] Can't update RADIO

I downloaded Shipped ROM. I extract it and rename RUU_signed.nbh file into LEOIMG.nbh
After that, i copy the LEOIMG.nbh file into sd card. Restart hd2 by press power off + volumn down and process update
It can't install RADIO and failed by this step(pls see attach file).
Please help me to overcome this matter.
Thanks!
Long.lv
[email protected]

Which HD2 version do you have?
What is the name of the ROM that you tried to flash?
Do you have HSPL? (<has nothing to do with the error, just out of curiosity)
How big is your SD card?

Marvlesz said:
Which HD2 version do you have?
What is the name of the ROM that you tried to flash?
Do you have HSPL? (<has nothing to do with the error, just out of curiosity)
How big is your SD card?
Click to expand...
Click to collapse
My HD2 model is T8585.
The ROM i used: RUU_Leo_S_HTC_WWE_EastEurope_3.14.479.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship.exe
HSPL 2.08
What can i do now?

That should have worked, you might have a borked radio.
Try the flash again, if it fails again try a custom ROM (that does not include a radio) and report back.

orangekid said:
That should have worked, you might have a borked radio.
Try the flash again, if it fails again try a custom ROM (that does not include a radio) and report back.
Click to expand...
Click to collapse
I dont know what Rom you mention above??
I should download what custom Rom type, give me the certain name?
Thanks!

longit29 said:
I dont know what Rom you mention above??
I should download what custom Rom type, give me the certain name?
Thanks!
Click to expand...
Click to collapse
By which HD2 version, I meant European or Tmobile one.
Anyway, it doesn't matter now.
Just flash the same ROM using HSPL. (double-click on the_rom.exe)
(Additional Step: If you want to remove HSPL completely, run HSPL4 and select an SPL from the drop down menu)
(welcome back, orange kid )

Marvlesz said:
By which HD2 version, I meant European or Tmobile one.
Anyway, it doesn't matter now.
Just flash the same ROM using HSPL. (double-click on the_rom.exe)
(Additional Step: If you want to remove HSPL completely, run HSPL4 and select an SPL from the drop down menu)
(welcome back, orange kid )
Click to expand...
Click to collapse
It is European. I also tried install Radio individually but it failed.
What i have to do next?
Long.lv

longit29 said:
It is European. I also tried install Radio individually but it failed.
What i have to do next?
Long.lv
Click to expand...
Click to collapse
v This .. (of course phone is already connected to the pc in bootloader mode)
Anyway, it doesn't matter now.
Just flash the same ROM using HSPL. (double-click on the_rom.exe)
Click to expand...
Click to collapse

Marvlesz said:
v This .. (of course phone is already connected to the pc in bootloader mode)
Click to expand...
Click to collapse
I'm sure my phone is broken down in RADIO. I tried to set up RADIO in some ways:
Download shipped ROM, extract and rename to leoimg.nhb, then copy it to sd card
Download RADIO file indiviually, and set tup, it also error.
You can see the attach file for further details. And give me some guides to overcome this.
Long.lv

Google "stuck radio" and prepare for disappointment.
Things worth trying -
1 SD flash of CORRECT stock rom after
freezing phone for half an hour (Freezer trick)
2 JTAG

[Q] HD2 Problems

I bought a used HD2 running CM10(NexusHD2-JellyBean v1.3a). I want to run WP7.8 on it so I looked up the ways to do that. Tutorials like http://forum.xda-developers.com/show...postcount=1193 say to flash a stock winmo6.5 rom before moving to WP7. I tried to do that by trying to flash RUU_Leo_S_HTC_WWE_3.14.405.2_Radio_15.42.50.11U_2. 15.50.14_LEO_S_Ship. The normal RUU Updat Utility came up with lots or errors, but mostly connection or no response from device issues. So upon further reading i found out an alternate way to go about it by renaming the nbh and putting it in an sd card. I used 2GB microSD card and tried to flash it. But mid-way it stopped and upon reboot it said software update failed with a triangle. I went into the 3-color screen and there the message was present as well with two other messages microp led and microp touch. I tried the sd flash method again but it stopped by giving a not allow 00028002 error every time. I flashed HSPL 2.08.000 from the HSPL4 executable and Android booted up again.
i also tried RUU_Leo_S_TMO_UK_3.14.110.1_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship_2 but the same update error(266, i think) came up
Can i now go to a stock rom and then to WP7?
Thanks, in advance
Device details:
Boots with purple "stick together" logo(Weird, google search says this is tmobile america slogan yet this device is not US)
S/N:ht04anw01415
HTC HD2 T8585 P81100 (from the back)

Anyone?

follow the links below & your ready togo

mengfei said:
follow the links below & your ready togo
Click to expand...
Click to collapse
thanks for the reply but i want to go back to the stock rom which it seems i'm unable to do. i tried the usb flash and microsd flash methods with both RUUs. if i get to stock then i can proceed to wp7 with a clean slate. ATM i've flashed energy rom (Energy.Leo.29022.Sense2.5.Reference.Jul.05) with radio 2.15.50.14 in an attempt to see if doing this would help flash stock rom but no success.

IF you want WP7 no need to go back to stock ROM, I guess you haven't take a look at this link
http://forum.xda-developers.com/showthread.php?p=25781675#post25781675
once you have Magldr in your HD2, next steps would be easy as pushing a button

got windows phone 7.8 on it, thanks. But what if i want to later on return to stock rom? even when i was trying to wipe with task29 it was giving same error 266 and as of yet i haven't successfully flashed anything by the RUU method.

HD 2 Problems Win7
hi guys
Yesterday I tried to install HD2 WP7 ... and install a new Radio ROM my phone off, and since I did not start .... no reset button under the battery cover does not work .... it happened to anyone of you?? ... I had previously installed the official 6.5

Ralph79 said:
hi guys
Yesterday I tried to install HD2 WP7 ... and install a new Radio ROM my phone off, and since I did not start .... no reset button under the battery cover does not work .... it happened to anyone of you?? ... I had previously installed the official 6.5
Click to expand...
Click to collapse
Nope but then again, i never had to flash another radio. Try to follow the tutorial in mengfei's signature and if it doesn't work create a separate thread for others to weigh in.

geforceonline said:
Nope but then again, i never had to flash another radio. Try to follow the tutorial in mengfei's signature and if it doesn't work create a separate thread for others to weigh in.
Click to expand...
Click to collapse
If you want stock windows mobile (with HSPL) > Use HSPL to flash windows mobile using the RUU.
If you want stock winmo AND stock spl > Install winmo using HSPL, then use HSPL package to uninstall HSPL (i.e. install stock SPL).
That's the only way I can think of since you're getting lots of errors doing anything without HSPL.

Marvlesz said:
If you want stock windows mobile (with HSPL) > Use HSPL to flash windows mobile using the RUU.
If you want stock winmo AND stock spl > Install winmo using HSPL, then use HSPL package to uninstall HSPL (i.e. install stock SPL).
That's the only way I can think of since you're getting lots of errors doing anything without HSPL.
Click to expand...
Click to collapse
I presume you're talking about the regular USB>3-color screen>RUU(on pc) method. Well, i've been doing that for stock roms and other stuff(splashes, etc.) too but i almost always seem to get error 266 update error.

geforceonline said:
I presume you're talking about the regular USB>3-color screen>RUU(on pc) method. Well, i've been doing that for stock roms and other stuff(splashes, etc.) too but i almost always seem to get error 266 update error.
Click to expand...
Click to collapse
If you don't have HSPL, you will get an error when trying to flash almost anything.
You said you flashed HSPL, but in fact you didn't
geforceonline said:
.. I flashed HSPL 2.08.000 from the HSPL4 ..
Click to expand...
Click to collapse
From HSPL4 you can flash the stock SPL, which is what you did. HSPL 2.08.0000 is stock SPL. With that, you can't do much.
You need 2.08.HSPL.
Try again and report back.

Marvlesz said:
If you don't have HSPL, you will get an error when trying to flash almost anything.
You said you flashed HSPL, but in fact you didn't
From HSPL4 you can flash the stock SPL, which is what you did. HSPL 2.08.0000 is stock SPL. With that, you can't do much.
You need 2.08.HSPL.
Try again and report back.
Click to expand...
Click to collapse
I just tried the USB RUU(with WWE and TMOUK versions) method with 2.08.HSPL and it gave the same error 266

geforceonline said:
I just tried the USB RUU(with WWE and TMOUK versions) method with 2.08.HSPL and it gave the same error 266
Click to expand...
Click to collapse
Try this easy fix:
http://forum.xda-developers.com/showthread.php?t=993472
To sum it up:
*Try a different port.
*Install ActiveSync/WMDC.
*If already installed, uninstall then re-install, or simply try a different computer if you have.

Marvlesz said:
Try this easy fix:
http://forum.xda-developers.com/showthread.php?t=993472
To sum it up:
*Try a different port.
*Install ActiveSync/WMDC.
*If already installed, uninstall then re-install, or simply try a different computer if you have.
Click to expand...
Click to collapse
have WMDC/Zune and drivers(also had activesync but deleted it because even then it didnt work)
tried all three ports
reinstalled it as well but unfortunatly no other pc is available atm

geforceonline said:
have WMDC/Zune and drivers(also had activesync but deleted it because even then it didnt work)
tried all three ports
reinstalled it as well but unfortunatly no other pc is available atm
Click to expand...
Click to collapse
Well, I am sorry then. I am out of ideas; you have wait for other members with greater knowledge.
Edit:
Maybe the USB cable? Although I highly doubt it, there is no harm in trying. Try a different cable and see what happens.

Marvlesz said:
Well, I am sorry then. I am out of ideas; you have wait for other members with greater knowledge.
Edit:
Maybe the USB cable? Although I highly doubt it, there is no harm in trying. Try a different cable and see what happens.
Click to expand...
Click to collapse
well, thanks for trying!
edit: IT WORKED! I tried another cable and while recognizing the pc went to some qualcomm drivers that i used to have and reverted to htc ones and the RUU picked it up and the flashing commenced. Thanks a ton!