Hi guys!
I'm trying to use (first time 4 me!) WiFi connection from my laptop and my Jamin in this way:
Start from scratch (without connections...) and turn on both wifi.
Create a new connection for only 2 devices from my Jamin without any security (4 the moment).
Now I can see the new wifi network on my laptop...
I chose connect from my laptop and the connections estabilish.
Handshake to retrieve the ip address is oaky and now I've got the connection from my 2 devices (Jamin and laptop).
On laptop I can ping the ip address of my Jamin but now I don't know what can I do with this connection.
Is it possible to share some folder on laptop and/or on Jamin to copy/remove/move some files?
Is it possible to use the std modem connection of my laptop for browsing the web from Jamin?
Is it possible to sync with Activesync my Jamin?
How can I do it, guys?
You can do most of what you want:
First, make sure that if you selected (on the Jamin) that your network connects to 'Work' in Settings->Connections->Connections->Advanced->Network Selection both lists read 'My work network' or 'My ISP' if you selected the 'connects to Internet'.
1) To browse, copy, move and delete files on you laptop just create standard windows shares. (right click folder or drive, select sharing)
To access the files from the Jamin select 'open path' in file explorer and type \\computer-name\\share-name. I recommend using the free Total Commander because built-in file explorer takes up to 3 times as long to transfer files (no idea why, it just hangs in the middle).
Unfortunately Windows Mobile does not support file sharing so this will not work viceversa (looking at Jamin files from laptop)
2) To serf the web through laptop internet connection you have to use 'internet connection sharing' (not a problem if you are using Win XP).
On the Jamin go to Settings->Connections->Network Card->Adapters
tap on your WiFi card in the list and enter your laptops IP as the gateway.
3) Sync is possible but tricky. I don't know the exact procedure but you need to set up a VPN (MS removed WiFi sync from AS 4+ for security reasons). The procedure is documented somewhere here, I just don't remember where exactly.
Great! Many thanks! ;-)
whoops...
Just another think....
What about hotspos?
I never search for a hotspot near me because I think I will not able to connect to a hotspot.
Can you exlain me the procedure to search and use hotspot? How can I see if the found hotspot is open or closed? Do you use some sw to connecti with WiFi?
I am not sure about your laptop, it depends on its WiFi card driver.
As for Jamin it is very simple: Turn on WiFi, it will automatically search for all available networks and display them stating if the network is open or secure. Then you just select a network you want and it will try to connect.
Also in settings->connections->Network cards you can see all the networks your device detected (even those that are not in the vicinity any more) when WiFi is on. Tap on a network to change its settings (like encryption type if any) or tap and hold for a menu.
If you don't mind wasting space on .NET CF 2 You can download a free app called Hitchhiker that helps auto-configure WiFi network connection.
Just remember: even if you found what looks like an open Hotspot it may be just an unsecured network that doesn't provide internet acces ot the network may block devices by MAC address, in this case it will show as open but you will not be able to connect.
Many thanks! ;-)
So, is it possible that I can connecto to a hotspot but I can't use it or if I see the hotspot connected that means that I can use it to surf the web?
After the connection is estabilished what I have to do or confiugre to surf the web using that connection?
Thanks a lot guy! You're helping me so mutch!
Whether you have internet access or not once you are connected depends on the network (what you think is a hotspot may be in fact someones home network that does not have internet access). If it is a public hotspot you don't have to do anything once you are connected except to open Internet Explorer.
Sorry 4 my stupid question but..
what is the difference between accesspoint and hotspot? :-(
I'm always thinking (WRONG) thet accesspoint is home LAN and hotspot is internet...
The definition thing is kind of tricky. When you say access point some people might just think of a device with an antenna that plugs in to your network to extend coverage and others might say it is the same as hotspot.
Hotspot is generally defined as a public access WiFi network.
All of that is semantics though. When you turn on a WiFi capable Pocket PC or laptop it detects everything with WiFi around it.
It can determine if the source is another computer (Ad-hoc network) or if it is a router (real network), what standard it is (g/b) and whether it is secured (requires key) or not. Also if the network broadcasts SSID (disabling it is another security measure) you may learn its name, although it may be set to default, which is usually the router model.
As far as I know there are two ways to learn what you are connected to:
1) Ask who ever is in charge of it.
2) Poke around, and see what you get.
One more thing: There is an app (not free) called PocketLAN. It shows you the network (on your Jamin) just like you would see it in Network Neighborhood on the PC, plus lets you ping other computers and stuff. You may want to check it out.
Thanks man!
Well! Yesterday I was able to manage shared folder of my laptop from Jamin with WiFi connection.
Thanks a lot!
Now I have another problem.... I clear all my "wifi networks" (?) from the tab visible in the screenshto.
I also clear all my wifi networks from laptop.
Tha problem is that I'd like to configure somethink on my laptop in order to automatically connect from my Jamin on it.
I'd like to turn on the wifi on Jamin and receive the notification that a connection can be estabilish to my laptop...
I tryed a lot but I can't do it!
Is it possible? The tab in attachment what rappresent? I have to confiugure somethink there?
I'm always thinking that wifi connection are visible simply turning on the wifi of any device...
Is there some guide for dummys? I don't want to annoing so mutch... :-(
levenum said:
You can do most of what you want:
First, make sure that if you selected (on the Jamin) that your network connects to 'Work' in Settings->Connections->Connections->Advanced->Network Selection both lists read 'My work network' or 'My ISP' if you selected the 'connects to Internet'.
Click to expand...
Click to collapse
im sorry levenum but i didnt quiet understand what u were trying to say... what exactly do i need to do after i select network selection ??
thank u
phreaker18 said:
im sorry levenum but i didnt quiet understand what u were trying to say... what exactly do i need to do after i select network selection ??
thank u
Click to expand...
Click to collapse
What are you trying to do? What is the problem you are getting?
If you start from the beginning I might be able to help you better.
In any case once you open 'Network selection' you will see two combo boxes - "drop down" lists.
You need to select same thing in both - "My ISP" than make sure when you connect to a network you select "The internet".
unable to find network wifi
i am using o2 xda mini s to connect my laptop via wifi. it shows the connections excellent on both devices with ip address 169.254.72.236 on ppc nd 169.254.130.63 on laptop. i used laptop ip address as gateway address on ppc network wifi adaptor setting.
using ping with this ip(169.254.72.236) from laptop it shows success. but can't share folders and transfer files. when i try to open the pah from the file explorer in ppc or laptop it says 'unable to find network that support this ip address' either by entering the name of computer or by entering ip address
help me in using this facility.
Hi guys,
I've got a netopia router (Irish "eircom" broadband) and while normal internet connections via laptop or PC (with USB Wifi dongle) work fine I just can't get my XDA Mini S to actually access the internet. I have managed to actually get it to connect via WIFI however when I launch internet explorer and click on a link it says it can't access using this connection.
"Can't connect with current connection settings. To change you connection settings, tap Settings".
Under connections I'm not sure what to select as I don't believe I need to setup a modem connection or VPN - am I wrong here??
It shows "connected" in the WIFI settings, indicating my SSID etc. Could someone advise me on what else I need to set. Basically I'm obtaining an IP address and my laptop etc work fine, just wondering what more I need to do to bash internet explorer into submission on the XDA. Is is just me or are Microsoft making this very hard on the normal user..
Start--> settings -->Wireless Lan
SSID is correct.. i.e my Wireless LAN
Mode : infrastructure
BSSID is set (though I don't know what this indicates)
TX Rate :auto
Channel :7
Start--> settings -->Wireless Lan - Advanced Tab
Status : Associated to Network
MAC number given
IP address given (so I guess DHCP is working fine)
Leap tab and Enroll tab - all settings blank.
------------------------------------------------
Start --> settings --> system --. Network cards
SSID shows Connected
Under Network Adapters tab : My network card connects to the Internet.
Adapter NE2000 Compatible Ethernet Driver. (not sure what difference this makes????)
I temporarily disabled WEP for the purposes of simplifying things.
Simple yet very annoying problem:
Go to Settings->connections->connections->advanced->network selection and make sure both combos read 'My ISP'.
Then, when connecting to your WiFi network select 'This network connects to the internet' (as I understand you already have this set under 'network adapters' so it should be ok).
THANK YOU!
levenum said:
Simple yet very annoying problem:
Go to Settings->connections->connections->advanced->network selection and make sure both combos read 'My ISP'.
Then, when connecting to your WiFi network select 'This network connects to the internet' (as I understand you already have this set under 'network adapters' so it should be ok).
Click to expand...
Click to collapse
Thank you so very much I have been look for this forever!!!
thanks so much for the tip too. i've been trying to fix my wifi ever since i upgraded to windows mobile 6 and this did the trick.
Hello... Got a Touch recently, and doing research found this forum. One of the best findings lately for me: already flashed the phone with a WM6.1 ROM and updated my radio successfully. But I have a problem (even before the flashing):
I can't connect to my wifi. I have a belkin N router. Have tested almost everything: updated the router's ROM, updated the phone's radio, turned off security, assigned manual IP's, etc, but with no success... so I'm running out of ideas. I can connect to another people's wifi's tho.
Anything I have missed? Just an incompatibility? (which means I'm screwed)
Thanks a lot
is t on n only mode?
touch is g/b as u probably know
if not, try with no security to see if it connects
Yeah, it is in a multiband setup (g/b/n).
Also tested with no security. No sucess.
I have the same problem, I'll let you know if I find a solution.
Same thing... I'm trying to figure out a solution, any findings, will post here.
I tried to connect my Touch to my old netgear 802.11b router at home without any success. I did a lot of "googling" on the subject, and only found that many concluded that it wasn't possible to do so.
Also, I have AT&T, and they are offering free hotspot WIFI connectivity to their customers (which is intended for laptops). My touch detects the WIFI signals, but I have yet to find out how to make a connection.
It seems like there should be a way to do it somehow though!
Anyway...
Best Regards!
pl, when you go into your Settings -> Connections -> Wi-Fi, can you see your wireless network being detected?
The only things that spring to mind at the moment, are the basics for normal connection ...
1. Network type (B/G/N)
2. Authentication (password)
3. MAC Filtering
Here's what I would do ...
1. Reset router (usually has default button at the back).
2. Set it up for DHCP (sometimes cures a lot of problems).
3. Set simple WEP with password.
4. Obviously a network name (make sure it is not hidden, also make sure AP is enabled)
5. Set channel
6. Set mode (Network type) to mixed.
7. Save and reboot.
8. Soft reset Touch
9. Go to Settings -> Connections -> Wireless LAN
10. Activate Wireless and see if your SSID (network name) pops up. From here you can see signal quality and IP (to make sure you got it from DHCP).
Give it a shot and let us know what happens.
same problem here, really annoying!
Strange, I have never had problems with mine (had it connected to a couple AP's already). In fact, it's easier than connecting my laptop to a WLAN.
You have anything else that can connect to your Router? pc or something.
My Touch can connect to other routers, and I have 2 PCs at home which connect to my Belkin N router, I just can't connect my Touch to it.
I found a solution
Customer Call Details Nov 13 2008 04:37
I have an HTC Touch that can connect to other hotspots, but not to my home Belkin router. Sometimes, if there is another connection available, it can see the router, and says that it is Available, but cannot connect; other times it won't even see it. I have checked for firmware updates, but I have the latest. Any help would be greatly appreciated.
Belkin Response Nov 14 2008 22:18
Hi Lilburd,
Thank you for contacting Belkin Technical Support.
We understand that the HTC Touch does not connect to the router. We apologize for the inconvenience caused.
Please follow the steps given below to update the firmware and configure the router:
We recommend that you update the firmware from a computer that is connected to the router with an ethernet cable.
Please download the latest firmware on the router from the link given below. Download the file "3.01.29":
http://www.belkin.com/uk/support/article/?lid=enu&pid=F5D8233uk4&aid=10288&scid=0
and save it to the computer.
- To update the firmware, log on to the router`s web interface by typing in http://192.168.2.1 in the address bar of the browser. The computer should be
connected to the router with an ethernet cable.
Note: If you have changed your Router’s IP address, use that IP address.
- By default, the password is blank. Click the "Submit" button.
- Click on "Firmware Upgrade" under the option "Utilities".
- Click on “Browse” and select the bin file that you have downloaded.
- Click on “update” and follow the wizard.
- After updating the firmware, restore the router to factory defaults by clicking on "Restore Factory Defaults" under "Utilities".
- Reconfigure the router.
Please follow the steps given below for configuring the router:
- Connect the computer to the "LAN" port on the router and connect the modem to the Internet/"WAN" port, using Ethernet cables.
- Take a paper clip, insert the paper clip in the reset hole of the router and hold it for 15 seconds.
- The power light will flash and then come back "ON" solid, indicating that the router is being restored to factory defaults.
- The corresponding lights on the front of the router should be lit up.
- On the computer, check if you have an IP address in the range of 192.168.2.x.
- If not, specify a static IP address, gateway and "DNS" address by following the steps given in the link-
http://web.belkin.com/support/kb/kb.asp?a=2824
- Log on to the router web interface by typing in http://192.168.2.1, in the address bar of your browser.
- By default, the password is blank.
- Click on "Connection Type" in the left hand column under "Internet WAN" heading.
If the connection type is Dynamic (cable):
- Choose "Dynamic" and then click on "Next".
- Type in your “Host Name”, if your Internet Service Provider has provided it. Else, leave it blank.
- Click on "Change WAN MAC Address".
- Click on the button "Clone".
- Click on "Apply Changes".
If the connection type is PPPOE (DSL):
- Choose "PPPOE" and click on "Next".
- Enter the user name and password given by your Internet Service Provider.
- Save the settings.
- Click on the "Home" link at the top of the screen.
Internet Status should show "Connected" on the top right hand corner of the web page.
If the problem persists, please get back to us with the following information:
1. Type of connection provided by your ISP (Is it PPPOE, Dynamic or static).
2. Name of the Internet service provider (ISP).
3. Version number of the router. You would find the version number on the bottom of the device. It would be a number in a series of thousands with a prefix “ver.”.
4. If the internet connection is stable on the computers using the router?
5. If the HTC Touch detects and connects to other networks in the neighborhood?
Lilburd, if you need further assistance please feel free to write back to us and we will be happy to assist you.
Regards,
Belkin Technical Support.
That really is strange. The way I see it, WLAN is a standard. It's like BT, any headset should work with any BT phone, as would any wireless device work with any wireless device
Maybe force the router to only broadcast in G (or even B) and see what happens? (I know, I'm reaching now )
Tried everything so far, no success. Even with no security enabled.
same problem here, Very Annoying, tried every thing
HTC Diamond doesnt connect to WiFi!!!!!
EMoeHTC said:
I tried to connect my Touch to my old netgear 802.11b router at home without any success. I did a lot of "googling" on the subject, and only found that many concluded that it wasn't possible to do so.
Also, I have AT&T, and they are offering free hotspot WIFI connectivity to their customers (which is intended for laptops). My touch detects the WIFI signals, but I have yet to find out how to make a connection.
It seems like there should be a way to do it somehow though!
Anyway...
Best Regards!
Click to expand...
Click to collapse
ANY SOLUTIONS TO THIS ISSUE YET....WAITING TO USE WiFi on My HTC-D.
THanks
Same problem here, N1 Vision router and XDA Orbit, both running on latest firmware. Wrote to Belkin support describing the issue. Here's their reply:
Code:
Thank you for contacting Belkin Technical Support.
We understand that you are not able to connect XDA Orbit WM6 communicator wirelessly.
To resolve this issue we suggest you to open ports on router.
Please collect the port number from the XDA Orbit WM6 communicator vendor and enter under "Inbound port" & "private port".
-Please open the Internet Explorer and in the address bar type in "192.168.2.1" and Enter.
-Leave the password blank and click on "submit".
-Click on "Virtual server" under the "Firewall".
-Enter the port number under "Inbound port" & "private port".
-Enter the IP address of this computer under the "Private IP address".
-Check the "Enable" box and click on "Apply changes".
George, if you need further assistance please feel free to write to us or call us on 08456077787.
You can also contact us through our online chat support at:
http://www.belkin.com/chat/technicalsupport.aspx
Regards,
Suzane Taylor
Belkin Technical Support
Utter nonsense...
I just got my Touch Diamond from Sprint and am having the same issue. I have a Belkin N+ Router that is in g/b/n wireless setting.
The phone just simply will not see the SSID even if you put the settings in there manually. What it does see however is the guest SSID my router emits and connected to it without any issues. The guest account is a feature of my router gives friends access to the web but denies access to internal network.
Out of curiosity changed my routers wireless bands to only G/B and all of a sudden my phone can see the network. Unfortunately for me I rely on the N part of my network to connect my laptops and do streaming HD so leaving it on G/B is not acceptable.
I just connect via the guest account, anyways its not like my phone would have been able to see the internal home network anyways.
Just my 2cents
I have the same issue.
Used to use a D_Link G router, but recently upgraded to a belkin N-draft one.
My laptop connects on G, and my desktop on N, so I can't switch N off and just use G.
Anyone found a solution yet? It's bugging the hell out of me!
I posted a fix on page one that should work. You have to update your firmware.
Did u all using any encryption security?
128bit WEP - touch have a problem of connection
64 bit WEP - works
have you enabled easypairing, (WiFi easypairing : Enabled) if so turn it off or press the required button sequence on the router to connect.
So long story short I am using an extremely annoying ISP in China where I need to have a username and password to login.
I set it up on my 2 laptops, they both connect to the router but also have a "broadband connection" I created in "windows 7 network and sharing" before it can connect to the internet.
but my gtab I can only connect it to the router but there is no internet access because I need to be able to plug in the username/pw?
You configured your router wrong. What you have is called PPPoE over ADSL. Most routers have the direct support to such protocol where you can put your login username and password in router's configuration and all the devices behind the router no longer need to do so, nor do they need to configure a special 'Broad Band' connection on the PC.
There are a few exceptions, some ISPs in China require you to use their special dialer software in order for the PC to connect, instead of using the standard 'Broadband Connection' supported by OS. The purpose of this is to force you use one PC at a time and there is no way to use a hardware router to share your single connection. If your connection falls into this category, there is nothing you can do to connect your tab without major network hack.
Hello, been a long time reader from my G1 to my G2 and now my nexus 4.
I am unfortunately not able to use my device on certain wifi networks which is a real bummer.
Being that i have a background in diagnosing computer problems in my real world life, i thought i would post my findings as i found some interesting things!
First i will say that the network i will use as the demonstration is secured with WPA2 PSK AES security and encryption.
I can connect to it and often find i have problems on the first connect to the network. By this i mean if i have made my wifi settings 'forget the network' and then try to connect again.
On the first time it seems to indefinitely hang, showing the message 'authenticating' on screen next to the network and if i long press on the network name and press modify, the dialog shows that i have a link speed of 1mbps.
I can usually get past this by turning wifi off and on and then reconnecting, at which point it will connect straight away and have a normal link speed. (in this example 72mbps).
After i am connected, i find that the following does not load:
-browsing webpages through chrome does not load
-the wifi icon turns grey
-play store cannot load anything
I find that i get assigned an ip address by dhcp correctly too with the right gateway and dns.
I decided to download a network tool to have a better look. I use fing personally.
I found it very interesting what i found, which no other threads about wifi issues mention.
Network discovery found every device on the local wifi network.
I was able to scan the services of my computer which is also on the network and it found everything, including a http server which i run which i could browse to.
In fact i could do everything through wifi with this device and most others.
Again it got interesting when I then took a look at my gateway, the router.
I had discovered its mac address which i can verify through my computer is correct which to my understanding, being that i can communicate through the wifi, means that i have the information available to send information to that physical device?
When trying to scan services, i find nothing, which is not true, at the very least it exposes a http server on port 80 which my computer can access.
When trying to ping i have 100% packet loss.
So at this point it is only the gateway i cannot access.
So i figure i could setup another computer which is connected to the network with a wire to share its connection through wifi onto that network and then i have a standin gateway?
I connected this computer through wifi to the network and pinged it succesfully with my phone. I then turn ICS on my wired adaptor to share to my wifi adaptor. I ensure that the wifi maintains an ip address in the right range and subnet.
I then try to ping that ip with the phone and it then gets 100% packet loss.
Could this be that when a device is configured to act as a gateway something changes about how it handles any packets sent to it that the nexus 4 is currently in compatible with?
elltg said:
So at this point it is only the gateway i cannot access.
So i figure i could setup another computer which is connected to the network with a wire to share its connection through wifi onto that network and then i have a standin gateway?
I connected this computer through wifi to the network and pinged it succesfully with my phone. I then turn ICS on my wired adaptor to share to my wifi adaptor. I ensure that the wifi maintains an ip address in the right range and subnet.
I then try to ping that ip with the phone and it then gets 100% packet loss.
Could this be that when a device is configured to act as a gateway something changes about how it handles any packets sent to it that the nexus 4 is currently in compatible with?
Click to expand...
Click to collapse
I have found a bit of a workaround that i can use!
When i said i turned on the wifi and ICS i did the following:
-Turned on wifi.
-Connected to wifi network.
-Turned on ICS on my wired network to share to my wifi
-Observed that my ip changed from 192.168.10.x to 192.168.137.1 with no gateway or dns.
-I decided to change my ip on the wireless to 192.168.10.x and gateway to my router 192.168.10.10
-I then tested.
I ran through this again but slightly different:
-Turned on wifi.
-Connected to wifi network.
-Turned on ICS on my wired network to share to my wifi
-Observed that my ip changed from 192.168.10.x to 192.168.137.1 with no gateway or dns.
-I decided to change my ip on the phone to 192.168.137.5 with gateway and dns as 192.168.137.1
-I then tested. And it works!
I know this doesnt fix the wifi issue itself, but for me, this makes a big difference as i can now use wifi at work where we also have poor mobile network coverage.
Edit:
Additionally i previously tried to setup this same computer to host a wifi network to share the connection using 'netsh' and creating a 'hostednetwork' but i found i was in the same situation where i still couldnt get the internet.