It took me a bit, but I've figured out how to share a tethered connection, such that the following setup works: I use my 8525 tethered to my laptop via USB to get an internet connection. I use XP Internet Connection Sharing (ICS) to share my internet access over a wifi ad-hoc connection so that another laptop(s) (i.e., girlfriend) can also get online.
This might not seem like much of a feat, but if you have ever tried to do it you will soon find that it is not normally possible. ICS on XP automatically sets up the host computer to act as a gateway using IP 192.168.0.1. This IP cannot manually changed on XP, as far as I have been able to determine through extensive googling (the same is not true for Win98, FWIW). And the same thing occurs with Window Mobile Internet Sharing. This means that there are two gateways competing to use 192.168.0.1 and the process fails with an error message saying something to that effect. I have looked high and low through the WM registry to find a way to change the IS default gateway IP, but had no luck. However the following works on the WM side to rectify the problem:
1) Enable Internet Sharing in WM6.
2) Attach to PC and wait for connection to be established.
3) In WM6, go to Settings -> Connections -> Wi-Fi. Click Network Adapters tab.
4) Set "My network connects to:" to Internet.
5) Click Remote-NDIS Host.
6) Change IP address to 192.168.1.1. Click OK.
7) On PC, enable Internet Connection Sharing under the Properties for the Windows Mobile-based Internet Sharing Device. Select the network you wish to share your connection over. Either Wifo ad-hoc or Ethernet via a crossover cable.
dotFred Task Manager reports that WM is now bound to two IP addresses, 192.168.0.1 and 192.168.1.1, but I have had no problems.
cheers,
fluxist
Hi,
I don't think this is currently possible but I do not see any reason why? Does anyone know if there is a 3rd party app to provide this?
Thanks,
Phillip
Possible ! (Well somewhat)
This is very much possible. I got it working as follows :
(1) Create a WiFi connection on Pocket Pc with ad-hoc feature and Open Security, make sure you select "Work" as the connection.
(2) Give the WiFi adapter on Pocket PC an internal address similar to 192.168.0.2 (255.255.255.0)
(3) On your PC/Laptop set WiFi adapter IP to 192.168.0.1 (255.255.255.0)
(4) You need a program like Pocket PC Proxy to be installed on the Pocket PC.
(5) Enable proxy settings on Laptop as 192.168.0.2:80 (or the port set on the proxy prog on ppc)
(6) Enable WiFi on ppc
And Voila ! You can browse internet using the connection on your ppc.
Hi,
Thanks, I will give this a try. However, I can't seem to find this piece of software (Pocket PC Proxy). Can you point me in the right direction?
Thanks
Here you go...
Thanks for the download, I'm using an HTC Touch (Elf) with WM6. I can't seem to figure out how to create an ad-hoc wifi connection?
(Sorry to be a pain but i think that this will benefit others too!)
Ahaa, I managed to figure out how to create an adhoc network on the Pocket PC, I assigned it the correct IP (as above) and basically followed the instructions.
I'm actually trying to get my iPod Touch to connect to the net via the HTC Touch.
I iPod sees the wifi connection and connects perfectly, I can even assign the ip and subnet mask. However, I simply can not connect to the internet either with or without the proxy. Any suggestions on what I am missing?
THanks
What kind of an internet connection do you have on the ppc ?
- GPRS/EDGE ? Is it always connected/on ?
Got it working, you can ignore the following
Thanks!
------
Hi, here is everything I have done:
Connections, Internet
Modem: T-Mobile Internet, GPRS (UK, no edge)
Proxy Settings: This network connects to the internet
This network uses a proxy server to conncet to the internet
149.254.291.132
(This was all set by the phone when I switched it on)
My Work Connection:
Nothing set up here
WIFI
Add New...
Network Name: test
Connects to: Work
This is a device-to-device (ad-hoc) connection
Authentication: Open
Data Encryption: Disabled
This seems to create an ad-hoc connection and sits there with 'Connecting' until another device connects to it.
Network Adapters
My network card connects to: Work
IEEE 802.11b/g Compatible WIFI....
Edit:
Use specific IP address:
192.168.0.2
255.255.255.0
(Everything else blank)
Wireless LAN
SSID: test
Mode: 802.11 Ad hoc
Channel: 11
When I connect two devices together the IP shown under advanced seems to read 192.168.0.21 (I think this should end .2 so not sure why it isn't)
If I connect my laptop I can 'ping' 192.168.0.2 and that works but both my laptop and ipod touch do not seem to be able to connect to the internet.
On the ipod touch I simply get 'Server not found' or something similar.
(I have remembered to run PocketPCProxy)
Yes, the GPRS is connected whenever I run PocketPCProxy.
I would really appreciate any help you can give, I really like using the browser on my ipod Touch but don't really want to go the whole hog and buy an iPhone because it is so tied down and restricted.
Thanks,
Phillip
I don't know what I have done but suddenly it works, now it comes up and shows the correct ip on my pocket pc.
Anyway, thanks for your help!
Hi everyone,
I have been trying to ad-hoc connect my PC (Lenovo X60s with XPSP2) to HTC Touch via WiFi to be able to share files and stream music.
It did connect and pinged ok, however the two just refuse to see one another on their networks.
Does anyone have any successful experience trying for the same?
Regards,
Madana
I tried this between my TyTN and TyTN II, the latter being the gateway, but the TyTN insists on still using GPRS for its internet instead of the wifi. Very annoying, and it's runing WM5 so (i dont think) you can't turn of the GPRS like you can with WM6.
Does anyone know how to make it use wifi, and wifi only for internet?
Thanks,
Sebastian
i have installed pocket pc proxy after a file called ......ppc3.arm.cab (i don't remember how it begins) but it doesn't work... any idea?
same here the pocket pc proxy when i run shows a fatal error in running it.
what should we do??
Hello,
I have samsung c6712 with wifi connected with internet near internet company with router as it is free for me, setting and pasaword is setted by those guys on my phone but they didnot give me their password and settings.
i like to run/use internet on my pc (xp32) with cable connection. How can I use that
[email protected]
Hi everyone,
I would like to connect to my laptop next room from local network. I can connect perfectly when I type in my IP address into the first textbox (Computer), but I can't connect when I type in my Computer Name (full computer name) instead. I tried MyPCName as Computer, \\MyPCName as Computer, forwarding port 3389 to my IP, leaving domain name empty, putting in my workgroup name as a domain, putting in my computer name as a domain, putting in myPCName\MyUserName as Username, \\MyPCName as Computer, still the same. It won't connect unless I put in the IP address. I would like to do this since my workplace assigns a different IP to my laptop then I assign at home, but naturally I have the same computer name at both places, so I would like to have a permanent setting for both places.
I'm running Windows 7 64 bit on my laptop and 1.66.405.2 ROM on my HTC HD2.
Many thanks in advance.
can you connect to it ok using another computer? might be a dns issue at a guess...
I can connect from other computers fine. Also on my HD2 I can see the host names of PC's under Resco Explorer and map them. However, remote desktop mobile refuses to work with the Computer Name. I can ping my Laptop's IP and also Computer name from pingbox2. Only in Remote Desktop Mobile there is a problem.
windows 7 by default blocks remote desktop connections from different versions of remote desktop. if you right click computer and select properties, then choose remote settings on the right hand side and select the middle option (accept connections from all verions of remote desktop). havent tried this my self but it solves most issues when using different versions of windows
OK, I sort of figured it but would still appreciate some help. Here is how I got it to work:
I had OpenDNS IP under DNS settings for wireless adapter. I deleted them. If I don't do this, pinging my computer name from HD2 always brings 67.215.65.132, which is opendns and not my true local IP, i.e. 192.168.x.x. I also had to disable the data connection (3G) and only have wireless. If I don't disable 3G, I can only connect with IP and not computer name. Only after doing these 2, when I pinged my computer name, I got the true local IP and I was able to connect with Remote Desktop Mobile using computer name. Now my question is:
1- I don't want to quit using opendns, is it possible?
2- I don't want to disable 3G connection every time, is it possible?
thanks in advance.
For me it works with MyPCName in computer and empty domain, both for XP and 7.
Something seems strange with your phone's networking configuration. At a guess (and this is a long shot), I would check your VPN settings on your phone to make sure you're not connecting to a different domain over 3G as this might explain why it works when you turn off the data connection on the phone and why it works by IP address.
As I said though, it's a long shot and is the only thing I could think of that fits your particular symptoms...
ozkaya said:
OK, I sort of figured it but would still appreciate some help. Here is how I got it to work:
I had OpenDNS IP under DNS settings for wireless adapter. I deleted them. If I don't do this, pinging my computer name from HD2 always brings 67.215.65.132, which is opendns and not my true local IP, i.e. 192.168.x.x. I also had to disable the data connection (3G) and only have wireless. Only after doing these 2, when I pinged my computer name, I got the true local IP and I was able to connect with Remote Desktop Mobile using computer name. Now my question is:
1- I don't want to quit using opendns, is it possible?
2- I don't want to disable 3G connection every time, is it possible?
thanks in advance.
Click to expand...
Click to collapse
about the open dns issues, I suspect that can be solved by making sure your router lets the incoming connection into your home network (you say it resolves to 66.whatever when open dns is used, shouldn't be a problem do long as you don't forget that will be your home ip address so that connection will neef to be allowed through the router and then forwarded by your routers virtual server (our whatever your router software calls out) to your laptops internal ip address.
as for the 3g it should use wifi over 3g by default..... mine certainly does, no need for me to disable it.
tomallen35 said:
Something seems strange with your phone's networking configuration. At a guess (and this is a long shot), I would check your VPN settings on your phone to make sure you're not connecting to a different domain over 3G as this might explain why it works when you turn off the data connection on the phone and why it works by IP address.
As I said though, it's a long shot and is the only thing I could think of that fits your particular symptoms...
Click to expand...
Click to collapse
I think you're right, when the 3G is on (and also Wifi on), Resco shows computers from all around the country when I click computers near me and not my local network. When only wifi is on I can see my local computers. 3G probably has precedence over Wifi? How can I correct this?
samsamuel said:
about the open dns issues, I suspect that can be solved by making sure your router lets the incoming connection into your home network (you say it resolves to 66.whatever when open dns is used, shouldn't be a problem do long as you don't forget that will be your home ip address so that connection will neef to be allowed through the router and then forwarded by your routers virtual server (our whatever your router software calls out) to your laptops internal ip address.
as for the 3g it should use wifi over 3g by default..... mine certainly does, no need for me to disable it.
Click to expand...
Click to collapse
But the 66.whatever address is generic openDNS lookup IP and same for everyone. Are you suggesting me to route this IP to my local IP, i.e. 192.168.x.x? Oh, one more thing, I can also connect when 3g and wifi are both on, but only through computer's IP and not computer name. Can you connect with computer name while both are on and connected?
when your phone does a dns lookup on the name it resolves to the open dns assigned address (not the same for everyone, otherwise the open fns system wouldn't work) so to connect to your computer the phone sends its request to open dns who forward that request to your current actual address.at home that address is your home ip address BUT it isn't your laptops address it is your routers address.(stop reading here if you don't have a router).
so the router needs to be told "if you get a connection request in port (whatever the remote desktop port is) please forward it to (laptop ip address)
its called port forwarding in some routers, virtual server in others.
samsamuel said:
so the router needs to be told "if you get a connection request in port (whatever the remote desktop port is) please forward it to (laptop ip address)
its called port forwarding in some routers, virtual server in others.
Click to expand...
Click to collapse
You're mixing up things a bit - he's not using dns but the computer netbios name. The point is that he has wifi on and connected as well as 3G, thus with an "intranet" ip address on Wifi... so the program/phone should be looking up the name on that connection, where it would find it, instead of looking up over the 3G connection. As the netbios protocol is not routable, it has no chance of finding the computer name over 3G/internet and back home, even with port mappings.
kilrah said:
You're mixing up things a bit - he's not using dns but the computer netbios name. The point is that he has wifi on and connected as well as 3G, thus with an "intranet" ip address on Wifi... so the program/phone should be looking up the name on that connection, where it would find it, instead of looking up over the 3G connection. As the netbios protocol is not routable, it has no chance of finding the computer name over 3G/internet and back home, even with port mappings.
Click to expand...
Click to collapse
you're totally right, I have a router and its port is forwarded to my laptop IP, but this is only good (and works well too) when I want to connect from Internet to my local network. I tried OpenDNS exceptions for VPN and defined an exception named as MyComputerName but it didn't work. Then I tried a dyndns solution, but it only works for external connections and not local network, i.e. it can't map local IP's. What I need is a dynamic client which can update my local IP.
I also tried to edit hosts entry in the registry with MyComputerName. It works for a single IP, but I'm not sure if I can write multiple IP adresses (my work and home local IP) into that. If I could maybe everything would be OK.
I've just tried a couple of things and it really works fine for me. If I connect Wifi only, I can remote desktop with the computer name. If I then connect data connection, it still works. Disabling wifi and obviously it doesn't work anymore. Re enabling wifi, it doesn't work at first, but does again after ~30 seconds once the netbios protocol has done its host lookup procedures.
There simply shouldn't be anything special to do.
kilrah said:
I've just tried a couple of things and it really works fine for me. If I connect Wifi only, I can remote desktop with the computer name. If I then connect data connection, it still works. Disabling wifi and obviously it doesn't work anymore. Re enabling wifi, it doesn't work at first, but does again after ~30 seconds once the netbios protocol has done its host lookup procedures.
There simply shouldn't be anything special to do.
Click to expand...
Click to collapse
thank you very much for your time, I appreciate it. You're right in that waiting a bit resolves the issue (it's a bit more than 30 secs for me that's why I thought it wasn't working when 3G is enabled) but only when OpenDNS is not used. I assume you don't use OpenDNS, right? Once I put that one into equation, it takes over NetBIOS protocol and returns its IP instead of the local IP(192.168.x.x). As far as I understand, DNS lookup has precedence over NETBIOS and if the name is not found in DNS it consults NETBIOS protocol. However OpenDNS has this nice "feature" where it finds the name with its own IP. There are several posts about this on its webpage and they say to either disable the typo correction or put exceptions for Netbios names, but sadly none of them works for me right now.
Nope, no OpenDNS, never actually heard of it.
How does it work? Do you enter their DNS server address in the network settings of your pc/phone, or is it an app you run?
you click Start/Settings/All Settings/Connections/Wifi/First Button/Switch to Network Adapters tab/Select Broadcom 802.11 DHD Network Adapter/Switch to Name Servers Tab/Type in 208.67.222.222 for primary DNS and 208.67.220.220 for secondary DNS, click OK. that's all. Could you try if it's not so much trouble? Thanks.
OK, remote desktop doesn't work either with the OpenDNS servers in.
I'm pretty sure it must be a limitation of the remote desktop app itself, as resco explorer can still navigate and/or discover the network shares of my other PCs with no problem. NBTStatCE also finds everybody.
Wouldn't even surprise me, as that Remote desktop mobile has always been troublesome. I don't remember exactly, but in the WM5 days it was pretty much impossible to use on a local network due to a weird handling of names... if I remember well all "local" (NetBIOS) addresses without a '.' entered in the remote desktop app would be redirected to the "Work" connection, while "remote" ones with a period would be directed on the "Internet" connection. As a network card can only be defined as one of them, if you wanted it to work in both cases through Wifi you had to switch the card from Work to Internet and back all the time. And of course when it's on Work it breaks some other things that use the default system handling like mail.
i bought a new router but i am not able to connect through it
i have a PPPoE connection ISP has provided me with the user name & password i have entered the same in the router settings page but cant connect, get the same error on the mobile as well.
i have attached images of the error as well as how i connect to my internet incase u need to see.
i can connect without the router to internet with the same username and password but when i connect through router i get error Your PPPoE or PPTP authentification failed
Anyone know whats wrong ?
come on no one ??
ignore the top posts
i get my isp provides me with connection from a router which connects through a switch and the to me now i have bought router so that i can access internet on my mobile through wifi how do i configure my router to do that ?
basically you dont know how to setup a home network,
did the router came with the provider or did u use a third-party router?
if so you need to setup your 3rd party router,
call the provider so they can provide the protocol encapsulation in which you will need to setup your router
I have a simple home net using mostly windows vista and 7 computers, some printers, external hd servers for backup storage and cameras in a workgroup static ip setup behind an off the shelf router. i set one of the computers as the vpn server since i dont want to buy a dedicated hardware vpn in a vista ultimate machine thats on 24/7 anyway with an incomming server... with the correct ports forwarded from the router to the vpn host.
my remote vpn laptop connects to the vpn fine and can see the network resources, however, has no internet connection once the vpn is connected. do i have to set the host vpn computer to do some sort of its own dns assignments to the incomming connection? its set for dhcp so i dont know why it would assign a valid IP to an incomming but not any other info.
in other words, on my remote laptop, i can connect to a random wireless internet hotspot and have full internet access. I can then enable vpn and log in to my home network and see all the network resources, however if i try to use an internet browser, there appears to be no internet. if i disconnect the vpn, the internet resumes to work fine and obviously the vpn resources are no longer accessable.
what am i missing? under incomming connection properties general tab, "allow others to make private..." is checked, under users the correct user is selected along with "require all users to secure...", and under networking ipv4 "allow callers to access..." is checked, and assign ip auto using dhcp is checked so I would think it should be working fine at this point, however it doesn list anywhere a gateway or dns to assine to incomming connections, only ip's.
host vpn computer is vista ultimate with static ip behind a retail router also assigned a static ip via my home isp.
the remote laptop is running ubuntu 12. just for kicks and to rule out ubuntu causing some problem, i set my android phone up for vpn use via 4g network, and the same thing happens. connects vpn fine, has local resources, but loses internet.
i also was curious as to having a vpn log in for the existing user account on the vpn host machine... in other words, should i just add the username on the host computer as a vpn client, and log in vpn using those credentials? and will that even work if that account is logged in, or will i have to remember to log out when im on the road to use the vpn connection.
thanks all!