Database Users

[Q] My defy not being detected by rsd

my defy is not being recognised by any of my laptop.
while i am successfully able to charge it from a wall socket.
not even in bootloader mood it is being able to detect any the defy using any of the available usb cord.
I am using the quarks gingerbread rom 11 11 11.
please help me as fast as possible.
and one more thing i have already tried to reset the cache.
will it be possible using bluetooth to be able to get back to froyo rom(so that i am able to send it to motorola service).
and also when the usb cord is inserted white lit glows up for a sec and will then switch off.
I am able to use my defy normally otherwise.

Seems like a physical problem with either your USB port or USB cable.
If you change the cable and it doesn't work - then it's the USB port in the phone, and you'll need to repair it.

Actually not it is not even booting it is stuck at m logo.
can i change the m logo(cyanogen) to normal motorola logo so that i can take it to motorola service centre(as it is still in warranty) by installing some zip.
i am able to access the 2nd init from it.

and more thing when i go to bootloader mode and connect the usb it says usb is connected.

Sainyam said:
and more thing when i go to bootloader mode and connect the usb it says usb is connected.
Click to expand...
Click to collapse
I've got the exact same problem, got anyone found a solution yet?
it say's it's connected but the pc don't recognize it. All Drivers installed a thousand of times on win 7 64 bit
thx
HB

the driver has some problems on win7 64bit.do you try it on xp?
Sent from my MB525 using xda premium

thx for the fast answer
not yet, just win 7 x86, i'll try to find someone with xp

Have u installed ur Motorola drivers on ur comp ? If no install them.. they help...
If it still doesn't work, right click on Rds>properties>compatibility>win xp. Try this too...
All the best!
Sent from my MB525 using XDA

I've got aprox the same problem , I can charge it ( but it says that IS DISCHARGING , nothing says me that is charging , only if I check battery level ) , but no connect via usb , no recognize RSD Lite , nothing .. More than that , If I plugin to wall charge or usb charge , my phone is working without battery , without restart .. any reason ?

Boot your phone into bootloader , flash your sbf go into stock recovery make a factory reset and reboot
Bootloader : vol. Up + power button
Sent from my MB526 using XDA App

bone101 said:
Boot your phone into bootloader , flash your sbf go into stock recovery make a factory reset and reboot
Bootloader : vol. Up + power button
Sent from my MB526 using XDA App
Click to expand...
Click to collapse
Doesn't recognize RSD Lite , how can I do that ? There's no data connection between pc and phone , just energy .

You boot into bootloader , you plug your phone onto pc with the newest driver and get no connection in rsd lite ?
Sent from my MB526 using XDA App

bone101 said:
You boot into bootloader , you plug your phone onto pc with the newest driver and get no connection in rsd lite ?
Sent from my MB526 using XDA App
Click to expand...
Click to collapse
Yes , absolute nothing I've reinstalled all drivers , but nothing .. It says on bootloader " Connect USB " and nothing happen if I plugin .

Anyone ? Please ? I Don't want to go service ..

you seems to have motherboard problem if your phone is in warranty claim it.
I was having the same issue, i gave my phone yesterday for motherboard replacement they asked me for 10 days so be ready for it.
i dont understand why so many people are getting this kinda error Dev please look into this problem.

Help Me Please Please

Hi
I Have Samsung Galaxy S.
I Have Installed Paranoid Custom ROM On My Device Now I Need To Flush The Original ROM
But I have Problem : When i connect my phone to pc the phone doesn't show any thing any connection massage and even if i enter the phone in downloading mode the pc and the phone doesn't show show any thing
Please I Need help i can't flash any stock rom please help:crying::crying::crying::crying:

Hi Syrian Eagle,
You should
Boot into "Download Mode"
start odin / heimdall
connect with computer via USB
load Stock firmware files
click on "Flash"- / "Start" - Button (I can't remember how is called)

http://forum.xda-developers.com/showthread.php?t=1637966
You could use this tutorial..you'll find package with Samsung drivers etc..make sure you have uninstalled old drivers & rebooted before installing new ones.
Also make sure you have working USB cable etc.
Sent from my GT-I9000 using Tapatalk 2

I forgot to post links
Here will you find Stock Firmwares
http://cur.lv/2j5o
Flash Guide
http://cur.lv/2j5p
Drivers
http://cur.lv/2j5q
Flashprograms
http://cur.lv/2j5r
Service Manuals
http://cur.lv/2j5s

diklooc said:
Hi Syrian Eagle,
You should
Boot into "Download Mode"
start odin / heimdall
connect with computer via USB
load Stock firmware files
click on "Flash"- / "Start" - Button (I can't remember how is called)
Click to expand...
Click to collapse
Thanks for your help but my problem is when i connect my phone in download mode or regular mode the pc doesn't see my phone and my phone doesn't say any thing (like if he is not connected) i think not a driver issue because previously i connect the phone into ODIN but now after flushing the paranoid ROM this problem appear .

Kurre said:
http://forum.xda-developers.com/showthread.php?t=1637966
You could use this tutorial..you'll find package with Samsung drivers etc..make sure you have uninstalled old drivers & rebooted before installing new ones.
Also make sure you have working USB cable etc.
Sent from my GT-I9000 using Tapatalk 2
Click to expand...
Click to collapse
The problem is when i connect my phone to pc the phone doesn't show any thing and the pc doesn't show any thing too .
when i connect my hone appears like if he is not connected.

Syrian Eagle said:
The problem is when i connect my phone to pc the phone doesn't show any thing and the pc doesn't show any thing too .
when i connect my hone appears like if he is not connected.
Click to expand...
Click to collapse
Your USB cable must be damaged or your USB port may need cleaning or damaged try these solutions http://forum.xda-developers.com/showpost.php?p=27205737&postcount=4571

Syrian Eagle said:
Thanks for your help but my problem is when i connect my phone in download mode or regular mode the pc doesn't see my phone and my phone doesn't say any thing (like if he is not connected) i think not a driver issue because previously i connect the phone into ODIN but now after flushing the paranoid ROM this problem appear .
Click to expand...
Click to collapse
If you have come from a GingerBread ROM that would be correct.
ICS/JB ROMS USE DIFFERENT DRIVERS
Now follow the advise and reinstall the samsung drivers and try again.

Lexrsk said:
If you have come from a GingerBread ROM that would be correct.
ICS/JB ROMS USE DIFFERENT DRIVERS
Now follow the advise and reinstall the samsung drivers and try again.
Click to expand...
Click to collapse
Ok How Can I Install the ICS/JB Drivers into my phone :crying::crying::crying::crying:

xsenman said:
Your USB cable must be damaged or your USB port may need cleaning or damaged try these solutions http://forum.xda-developers.com/showpost.php?p=27205737&postcount=4571
Click to expand...
Click to collapse
Thank you very much but my problem is not resolved because when i connect my phone into the pc my phone and the pc doesn't show any thing like if he is not connected

Turn off the phone, remove battery, wait 1 minute, put the battery back and restart the phone. Then connect the phone to your pc and see if that helped.
Sent from my GT-I9000 using Tapatalk 2

Syrian Eagle said:
Thank you very much but my problem is not resolved because when i connect my phone into the pc my phone and the pc doesn't show any thing like if he is not connected
Click to expand...
Click to collapse
Every possible reason and solutions that I am aware of, for them are mentioned on that link , you have to try and test each one out, including various Drivers, for you to test...
BUT you keep saying there was no Sign of connection, which means the PC does not say anything (like unknown USB Device) or make a sound and your USB icon does not appear on the phone...am I correct???
That simply means there is NO link, which means, its either your USB cable or USB Port is damaged

alexovy said:
Turn off the phone, remove battery, wait 1 minute, put the battery back and restart the phone. Then connect the phone to your pc and see if that helped.
Sent from my GT-I9000 using Tapatalk 2
Click to expand...
Click to collapse
Sorry nothing get petter still the problem

Help usb not recognized defy :(

hey there :good:
can u help me with that please ?
downloaded the drivers for motorola and still the pc not recognized it :crying:
what can i do ? tnx for all the help :highfive:
p.s all the usb in my computer is ok - test it with all usb devices !
the motorola defy runing 2.1

1.jast format the sd card - fail to recognized it
2. replace sd card - fail to recognized it
please help me
tnx.

& installed motorola rsd lite & motorola divice manager - fail to recognized it ...
please i need your help.

in the divice mamnager in windows 7 i cant see a yello triangle on any off the usb [email protected]#?!
but still the pc cant recognized the mobile motorola defy phone !
what can i do ?

If you rejoin yourself and try to be more accurate with your's problem description somebody will help.
First: what do you wanna do?
Second: power off your phone. Power on with Vol+ pressed. Boot menu will appear. Connect the usb cable to PC and after to phone. In what way pc reacted?

pgreed said:
If you rejoin yourself and try to be more accurate with your's problem description somebody will help.
First: what do you wanna do?
Second: power off your phone. Power on with Vol+ pressed. Boot menu will appear. Connect the usb cable to PC and after to phone. In what way pc reacted?
Click to expand...
Click to collapse
1.OK - need to flash to jelly ...
2. did what u say ... -> im geting a black screen bootloader 09.10
battery ok
ok to program transfer mode:
ok
thats it the pc dont - dont do anything ...

what can i do from here mate ?
i truly appreciate your help !

im despaired
please help

tuneon said:
im despaired
please help
Click to expand...
Click to collapse
XP is more suitable for flashing. I am also faced troubles with win7
Sent from my MB525 using Tapatalk 2

tuneon said:
1.OK - need to flash to jelly ...
2. did what u say ... -> im geting a black screen bootloader 09.10
battery ok
ok to program transfer mode:
ok
thats it the pc dont - dont do anything ...
Click to expand...
Click to collapse
From this position if you connect the Defy to PC through usb cable you will see a message on the pc saying that it search the drivers. After pc find and install drivers (or you install drivers from forum) start RSD and do the flsh. If you see nothing most probable that usb cable is defective.

Fail - please help me

tuneon said:
Fail - please help me
Click to expand...
Click to collapse
Dude, I'm having this problem, too...
A friend gave me his Defy to let me repair it - it has the LED Bug (or what its called), so it does nothing. Just giving a white LED, when it has been connected with USB Port... I tried so mich different drivers, USB-Ports and USB-Cables... All Modes that I found I tried and so on, but no chance...
Now I hope to get a important information in this forum...
...sent with my LG Optimus 4X HD...

tuneon said:
Fail - please help me
Click to expand...
Click to collapse
Did you try with another USB cable?

first step
1
Does the phone charge?
charge the battery
2
hold vol+ button, vith the other hand hold power
3
Now you can drop phone on table,
what u see
¿triangle with ! ?
¿white text?
ok, this is the bootloader
4
power off.
SOFTWARE
rds lite, version and drivers ok? sure?
uninstall all(motorola, drivers, rds, all), reboot pc, reinstall
restart after installing each program
(THIS is only to have a clean instalation with appropiate aplications and drivers)
run rds lite and conect phone(with original motorola usb)
(time ago have problems with galaxy ace usb)
*

ok did it + hard reset to the defy + format to the sd card

kienlodiria said:
1
3
Now you can drop phone on table,
what u see
¿triangle with ! ?
¿white text?
ok, this is the bootloader
*
Click to expand...
Click to collapse
??? What method is that?

foramt my laptop to try to get connect 2 the defy - but stiil - fail
help please

tuneon said:
foramt my laptop to try to get connect 2 the defy - but stiil - fail
help please
Click to expand...
Click to collapse
I didn't say to format the pc but to try another usb cable because sometime is a data cable problem.

pgreed said:
I didn't say to format the pc but to try another usb cable because sometime is a data cable problem.
Click to expand...
Click to collapse
did all you say mate but stiil - fail

Now the computer says that the usb is unrequgnized ?
after i install the drivers:
http://www.mediafire.com/?spf3928sdnde4o3 --> what can i do now please ?
tnx.

[Q] Defy bricked and doesn't detect my phone on any systems

I have tried all different cables and computers... i just get unknown device when i plug my phone in rsd lite... i tried to change the usb charging port still no success in it... i have uninstalled and installed the motorola drivers and tried all available rsd lite... but no success :crying: any help to sort this issue...

sunnysays said:
I have tried all different cables and computers... i just get unknown device when i plug my phone in rsd lite... i tried to change the usb charging port still no success in it... i have uninstalled and installed the motorola drivers and tried all available rsd lite... but no success :crying: any help to sort this issue...
Click to expand...
Click to collapse
Are you able to enter bootloader mode on your phone? (Power on while holding the "volume up" button. If that doesn't work, try pulling the battery and re-inserting it while holding the power and volume up buttons.) Then try connecting to RSD Lite.
If all else fails, you could try using the sbf_flash tool in a linux environment. See here and here for guides.
If you don't have a computer with Linux, you can run it from a usb thumb drive with this. If you haven't used linux before, Ubuntu is probably easiest to use.

i am able to enter to bootloader mode but the phone is been detected as UNKNOWN DEVICE...

Proverbs2 said:
Are you able to enter bootloader mode on your phone? (Power on while holding the "volume up" button. If that doesn't work, try pulling the battery and re-inserting it while holding the power and volume up buttons.) Then try connecting to RSD Lite.
If all else fails, you could try using the sbf_flash tool in a linux environment. See here and here for guides.
If you don't have a computer with Linux, you can run it from a usb thumb drive with this. If you haven't used linux before, Ubuntu is probably easiest to use.
Click to expand...
Click to collapse
i am able to enter to bootloader mode but the phone is been detected as UNKNOWN DEVICE... any idea to do it windows

sunnysays said:
i am able to enter to bootloader mode but the phone is been detected as UNKNOWN DEVICE... any idea to do it windows
Click to expand...
Click to collapse
Did you install the moto drivers on your PC?

Proverbs2 said:
Did you install the moto drivers on your PC?
Click to expand...
Click to collapse
yup all latest drives... i have tried uninstalling and installing multiple times but of no use

sunnysays said:
yup all latest drives... i have tried uninstalling and installing multiple times but of no use
Click to expand...
Click to collapse
That's strange. Does the Bootloader screen say "Battery OK, OK to program, Connect USB Data Cable"? Do you see anything else in RSD Lite besides "Unknown Device"?
You could try using USBDeview on your PC to try to figure out what sort of device your PC thinks your phone is. If the phone is in bootloader mode connected properly, you should see "Motorola Flash Interface" listed under the connected devices, and if you double-click on it, you'll see more information that might help with troubleshooting. What driver version do you see there?
I've attached a screenshot so you can see what it's supposed to look like.

Proverbs2 said:
That's strange. Does the Bootloader screen say "Battery OK, OK to program, Connect USB Data Cable"? Do you see anything else in RSD Lite besides "Unknown Device"?
You could try using USBDeview on your PC to try to figure out what sort of device your PC thinks your phone is. If the phone is in bootloader mode connected properly, you should see "Motorola Flash Interface" listed under the connected devices, and if you double-click on it, you'll see more information that might help with troubleshooting. What driver version do you see there?
I've attached a screenshot so you can see what it's supposed to look like.
Click to expand...
Click to collapse
Bootloader screen say Battery OK, OK to program, Transfer mode :USB the problem is my windows doesnt detect the device and RSD lite doesnt show my device

sunnysays said:
Bootloader screen say Battery OK, OK to program, Connect USB Data Cable Transfer mode :USB the problem is my windows doesnt detect the device and RSD lite doesnt show my device
Click to expand...
Click to collapse
Ok, what do you see in USBDeview?

Try in another pc or in a virtual machine of Windows XP, or check in which usb port you're plugging on the cable, in my computer with Windows 8 for example, I have 4 ports on the back of the cpu and 2 on the front, the front ones don't work to use RDSLite but they work for mass storage and debugging without any problems, but for RDSLite I have to use the back ports
Sent from my MB526 using Tapatalk

Proverbs2 said:
Ok, what do you see in USBDeview?
Click to expand...
Click to collapse
i see nothing

DiegoxG said:
Try in another pc or in a virtual machine of Windows XP, or check in which usb port you're plugging on the cable, in my computer with Windows 8 for example, I have 4 ports on the back of the cpu and 2 on the front, the front ones don't work to use RDSLite but they work for mass storage and debugging without any problems, but for RDSLite I have to use the back ports
Sent from my MB526 using Tapatalk
Click to expand...
Click to collapse
I have tried it on other pc and on xp to and tried different usb port and cables too but no use

Looks like you're using an old version of RDSLite, why not trying another one? Maybe 5.6
Sent from my MB526 using Tapatalk

DiegoxG said:
Looks like you're using an old version of RDSLite, why not trying another one? Maybe 5.6
Sent from my MB526 using Tapatalk
Click to expand...
Click to collapse
tried all rsd lite version

sunnysays said:
i see nothing
Click to expand...
Click to collapse
That's not good. If your phone is going into bootloader mode but USBDeview isn't picking up any signal from the USB, it may be a hardware problem. How did your phone get bricked? Was its USB port working properly before that?

Proverbs2 said:
That's not good. If your phone is going into bootloader mode but USBDeview isn't picking up any signal from the USB, it may be a hardware problem. How did your phone get bricked? Was its USB port working properly before that?
Click to expand...
Click to collapse
it was working properly before... i have tried different usb charging port too.. but still face the same problem :crying: phone got bricked by using defy_safe_wipe and i rebooted accidentally :crying:

sunnysays said:
it was working properly before... i have tried different usb charging port too.. but still face the same problem :crying: phone got bricked by using defy_safe_wipe and i rebooted accidentally :crying:
Click to expand...
Click to collapse
Hmm, the safewipe script isn't supposed to touch the recovery partition. Can you get into stock recovery? (Take the battery out, then put it back in while holding the volume down and power buttons at the same time.) If you can get into the stock recovery, do a full factory reset, then try flashing an sbf again.

Proverbs2 said:
Hmm, the safewipe script isn't supposed to touch the recovery partition. Can you get into stock recovery? (Take the battery out, then put it back in while holding the volume down and power buttons at the same time.) If you can get into the stock recovery, do a full factory reset, then try flashing an sbf again.
Click to expand...
Click to collapse
i tried it .. but no stock recovery if i hold it upto 10 mins with volume down and power button.. its totally bricked... only thing is i can get into bootloader....

sunnysays said:
i tried it .. but no stock recovery if i hold it upto 10 mins with volume down and power button.. its totally bricked... only thing is i can get into bootloader....
Click to expand...
Click to collapse
I'm afraid I'm out of ideas, except for trying the sbf_flash tool in Linux. (It's not that hard to use, and you don't have to install Linux on your PC; you can just run it from a usb drive.)

Proverbs2 said:
I'm afraid I'm out of ideas, except for trying the sbf_flash tool in Linux. (It's not that hard to use, and you don't have to install Linux on your PC; you can just run it from a usb drive.)
Click to expand...
Click to collapse
Fine will give a try and let u know

Gionee Elife E7 Hard Bricked

Hi Guys,
Please I am in some serious mess and I need help. i messed up with my bootloader and now my phone seems dead. now here's what happens, the phone is completely dead and does not power on. any time i connect it to pc, it shows under device manager as USB Input device. under the tap 'HUMAN INTERFACE DEVICE (HID) the red light stays on for some time then it goes off. Actually i have all the necessary flash firmwares to kick it back to life, but the issue i am having is, my phone is not being detected by my pc. i installed Gionee drivers from the official webpage but still it won't detect my phone. it always sees my phone as 'USB INPUT DEVICE' i was told it needs to be detected under com port before my flashing sotware can recognize it.
please Help

Steps Parku said:
Hi Guys,
Please I am in some serious mess and I need help. i messed up with my bootloader and now my phone seems dead. now here's what happens, the phone is completely dead and does not power on. any time i connect it to pc, it shows under device manager as USB Input device. under the tap 'HUMAN INTERFACE DEVICE (HID) the red light stays on for some time then it goes off. Actually i have all the necessary flash firmwares to kick it back to life, but the issue i am having is, my phone is not being detected by my pc. i installed Gionee drivers from the official webpage but still it won't detect my phone. it always sees my phone as 'USB INPUT DEVICE' i was told it needs to be detected under com port before my flashing sotware can recognize it.
please Help
Click to expand...
Click to collapse
Follow this.. U shud b alrite..
http://forum.xda-developers.com/showthread.php?t=2735079

Still Not Helpful.
freak_on said:
Follow this.. U shud b alrite..
http://forum.xda-developers.com/showthread.php?t=2735079
Click to expand...
Click to collapse
Thanks for the support, but actually i have already visited the link. right now, the issue is, my device detects as a USB HID DEVICE, instead of the qualcom. i have downloaded all the necessary drivers but still. And the above link said he has no idea how to deal with that.

Steps Parku said:
Thanks for the support, but actually i have already visited the link. right now, the issue is, my device detects as a USB HID DEVICE, instead of the qualcom. i have downloaded all the necessary drivers but still. And the above link said he has no idea how to deal with that.
Click to expand...
Click to collapse
Try repair ur dirvers, next plug ur device with GNQ , bp browser open the file ( firmware ) an chose bp_imagen next try ap+bp emergency is anyway is not working change this option for general dowload ap+bp
try it

Still Not Helpful.
andresplata94 said:
Try repair ur dirvers, next plug ur device with GNQ , bp browser open the file ( firmware ) an chose bp_imagen next try ap+bp emergency is anyway is not working change this option for general dowload ap+bp
try it
Click to expand...
Click to collapse

Still Not Helpful.
andresplata94 said:
Try repair ur dirvers, next plug ur device with GNQ , bp browser open the file ( firmware ) an chose bp_imagen next try ap+bp emergency is anyway is not working change this option for general dowload ap+bp
try it
Click to expand...
Click to collapse
Hi, Thanks for the help but i did that several times, i even formatted my pc re-installed windows, re-installed the gionee drivers and over and over again, i even tried doing this from windows xp, 32bit, 64 bit, windows vista, windows 7, windows 8. and in all of this above mentioned os, anytime i connect my phone, it displays under Human Interface Devices as USB INPUT DEVICE, with the red light flashing. in this mode, GNQ downloader never gets to recognize my phone. Please any help?
:crying:

Same Problem...
Steve, did you solve the problem? If yes, how did you solve it?
I have the same problem with my Blu Life Pure XL, which is a similar phone.
Regards,
Ricardo
Steps Parku said:
Hi, Thanks for the help but i did that several times, i even formatted my pc re-installed windows, re-installed the gionee drivers and over and over again, i even tried doing this from windows xp, 32bit, 64 bit, windows vista, windows 7, windows 8. and in all of this above mentioned os, anytime i connect my phone, it displays under Human Interface Devices as USB INPUT DEVICE, with the red light flashing. in this mode, GNQ downloader never gets to recognize my phone. Please any help?
:crying:
Click to expand...
Click to collapse

freak_on said:
Follow this.. U shud b alrite..
http://forum.xda-developers.com/showthread.php?t=2735079
Click to expand...
Click to collapse
hey.
I have this problem with my e7 ,
could you fix it , please ?

I have the same problem with zte nubia z7max, so its qualcomm issue that has rarely been talked about and I couldn't find any solution to it at all too.
if find one,let me know plzzzz.
thnx