[Q] Help Galaxy y JellyBlastv3.0.3 - Galaxy Y GT-S5360 and Duos 6102 Q&A, Help & Troubl

i already done updating JellyBlast 3.0.1 and 3.0.2 after i flash v3.0.3 its stock in the first boot screen and not working..what is the problem?
please help.
sorry for bad english..

mayei said:
i already done updating JellyBlast 3.0.1 and 3.0.2 after i flash v3.0.3 its stock in the first boot screen and not working..what is the problem?
please help.
sorry for bad english..
Click to expand...
Click to collapse
clear cache and dalvik cache....
than it will boot up....
Sent from my GT-S5360 using xda app-developers app

anmolsharma1293 said:
clear cache and dalvik cache....
than it will boot up....
Sent from my GT-S5360 using xda app-developers app
Click to expand...
Click to collapse
where can i find that 2 cache?sorry for the noob question >.<

On cwm clear cache partition

mayei said:
where can i find that 2 cache?sorry for the noob question >.<
Click to expand...
Click to collapse
its on clockworkmod recovery....
click on clear cache partition...than go to advanced and click on clear dalvik cache....its done
Sent from my GT-S5360 using xda app-developers app

Akash vibhute said:
On cwm clear cache partition
Click to expand...
Click to collapse
cant wipe..its says E:can't mount / cache recovery/last_log.. please help

mayei said:
cant wipe..its says E:can't mount / cache recovery/last_log.. please help
Click to expand...
Click to collapse
click on mount & storage....than mount cache...than do the wiping
Sent from my GT-S5360 using xda app-developers app

need to update to jbv3.0.3
hey i use jbv3 in galaxy y! its awesome..i couldnt update from 3.0.0 to 3.0.3 through OTA..
so through flashing zip file can i do?
AND IF SO should i update it first to 3.0.1 and 3.0.2 before updating to 3.0.3? or can i update directly using 3.0.3 flashable zip?
somebody pls do help ..sry for bad english..pls help

barath kannan said:
hey i use jbv3 in galaxy y! its awesome..i couldnt update from 3.0.0 to 3.0.3 through OTA..
so through flashing zip file can i do?
AND IF SO should i update it first to 3.0.1 and 3.0.2 before updating to 3.0.3? or can i update directly using 3.0.3 flashable zip?
somebody pls do help ..sry for bad english..pls help
Click to expand...
Click to collapse
download files of ota update from jellyblast thread....only ota 2 &3 r needed....ota 1 not needed...
its given on first page ....
flash the zips via cwm...and do wipe cache and dalvik cache....
Sent from my GT-S5360 using xda app-developers app

anmolsharma1293 said:
click on mount & storage....than mount cache...than do the wiping
Sent from my GT-S5360 using xda app-developers app
Click to expand...
Click to collapse
E:error mount cache its say..

which recovery u r using...???
clockworkmod or stock recovery that comes with phn...
Sent from my GT-S5360 using xda app-developers app

anmolsharma1293 said:
which recovery u r using...???
clockworkmod or stock recovery that comes with phn...
Sent from my GT-S5360 using xda app-developers app
Click to expand...
Click to collapse
clockworkmod..GTS5360-cwm.zip.

mayei said:
clockworkmod..GTS5360-cwm.zip.
Click to expand...
Click to collapse
Ok..
Try flashing your jellyblast again...
And then update it via ota feature..

need to update to jbv3.0.3
updated to 3.0.3 successfuly! but my status bar s not working!! i get message as force close!

barath kannan said:
updated to 3.0.3 successfuly! but my status bar s not working!! i get message as force close!
Click to expand...
Click to collapse
dont use statusbar mods...
their is bug on that....
just restart ur phn....than status bar will come back
Sent from my GT-S5360 using xda app-developers app

thanks alot! now everything fine!
enjoying with 3.0.3 version :laugh:
well can u pls tell how to overclock ?
---------- Post added at 11:21 PM ---------- Previous post was at 10:49 PM ----------
ya its kuroz!

barath kannan said:
thanks alot! now everything fine!
enjoying with 3.0.3 version :laugh:
well can u pls tell how to overclock ?
---------- Post added at 11:21 PM ---------- Previous post was at 10:49 PM ----------
ya its kuroz!
Click to expand...
Click to collapse
what did you do?im stock in JBV3.0.2..whenever i flash the JBVOTA3 and boot..its stock in the Galaxy Y GT-S5360 Screen(Before the S Animation)and never continue..whats the problem?

This is ive done so far..
Root My SGY
Install CWM
Flash JBV3 works fine
Flash JBVOTA1 works fine
Flash JBVOTA2 works fine
but..Flash JBVOTA3 stock at the Boot Screen Galaxy Y GT-S5360(Before the "S" Animation)
whats the problem?anyone can help me to fix this problem please?

Help ?
I want to know that if my phone will brick if i enlarge the phone internal memory, overclock the cpu and gpu speed, install a rom and install chainfire 3D will it brick ? I also want to know that if after installing a jellyblast V3 rom and installing chainfire 3D will it brick too ? And can I flash merruk kernel Final Version 1.0.8 before flashing merruk kernel Deluxe Edition via odin mode and how to install these kernels. Please give me the steps ( how to go into odin mode and how to install merruk kernel Deluxe Edition ), thanks for anyone who helps. :laugh:
p.s. my English is very bad ( sorry for asking so much because I am a new member )
JELLYBLAST V3 rom + Merruk kernel Deluxe Edition = best rom and 1.248 Ghz phone ! ( for me... )

alexbrian21 said:
I want to know that if my phone will brick if i enlarge the phone internal memory, overclock the cpu and gpu speed, install a rom and install chainfire 3D will it brick ? I also want to know that if after installing a jellyblast V3 rom and installing chainfire 3D will it brick too ? And can I flash merruk kernel Final Version 1.0.8 before flashing merruk kernel Deluxe Edition via odin mode and how to install these kernels. Please give me the steps ( how to go into odin mode and how to install merruk kernel Deluxe Edition ), thanks for anyone who helps. :laugh:
p.s. my English is very bad ( sorry for asking so much because I am a new member )
JELLYBLAST V3 rom + Merruk kernel Deluxe Edition = best rom and 1.248 Ghz phone ! ( for me... )
Click to expand...
Click to collapse
Try the search feature offered by xda and you will get answer for all your questions ..
Flashing Rom and kernel won't brick your phone if you follow procedures correctly.
If flashing Rom was going to brick the phones then there wouldnt have a single custom rom in development section..

Related

After installing ChobitsDigitalis ROM...

After I installed Chobits Digitalis, I can't install another rom, I tried Creed's ROM 3.2 or Ultimate Sonic Rom v5 and it' still stuck at the screen where "Samsung Galaxy Y young S5360" Os displayed. Please help. I'll press thanks to thr onr who helped and respect your feedback. I'm just a newbie here
Sent from my GT-S5360 using xda app-developers app
Already tried to wipe data, cache and dalvik-cache?
Or tried to install stock rom before the custom?
You shud always install a custom rom on a stock rom..
U can get the stock rom from here
http://forum.xda-developers.com/showthread.php?t=1465800
Sent from my GT-S5360 using xda premium
gu200123 said:
Already tried to wipe data, cache and dalvik-cache?
Or tried to install stock rom before the custom?
Click to expand...
Click to collapse
Already tried it. Its the same.
Sent from my Samsung Galaxy Y S5360 Smart Gold 3G Using XDA developers app.
I dont really know what problem is this, I had the same. Just ChobitsDigitalis worked. And I loved it
gollayanjr said:
Already tried it. Its the same.
Click to expand...
Click to collapse
You have to find the rom included with kernel..like repencis 3.5..if u don't like the theme you can change it..
Sent from my GT-S5360
at first flash a stockkernel than wipe all(data/cache)than flash new firmware.
gollayanjr said:
Already tried it. Its the same.
Sent from my Samsung Galaxy Y S5360 Smart Gold 3G Using XDA developers app.
Click to expand...
Click to collapse
Are you sure sir? Usually going back to stock ROM and kernel solves it. Try again to go to stock, then reflash Chobits; and be sure to follow the instructions carefully. :good:
gollayanjr said:
After I installed Chobits Digitalis, I can't install another rom, I tried Creed's ROM 3.2 or Ultimate Sonic Rom v5 and it' still stuck at the screen where "Samsung Galaxy Y young S5360" Os displayed. Please help. I'll press thanks to thr onr who helped and respect your feedback. I'm just a newbie here
Sent from my GT-S5360 using xda app-developers app
Click to expand...
Click to collapse
1st Wipe data then re-install chobits digitalis Rom then reboot it will take much time so wait. Then install merruk kernal or any other kernel on your sgy.after successfully installing new kernel go to recovery mode,then install creed rom......
i hope it will be installed on ur sgy.. Now Wait 2-3 minutes for rebooting............
Is that method work???? Plz let me know,,,,,,,
Sent from my GT-S5360 using xda premium
i'm not sure about your problem but i have successfully flashed chobitdigitalis from repencis and i also succeed in reverting to repencis.
i flashed chobits, while my phone is on repencis.
then i reverted to repencis by restoring my nandroid back up of repencis. i didn't even wiped data, system or cache. just restored my backup.
Flash stock kernel via cwm or odin and reflash the rom. Remember to wipe data and cache partition otherwise you can experience bootloops. You have been facing this problem because chobits digitalis rom has its own custom kernel.
Sent from my GT-S5360 using Tapatalk 2
changeing roms halts system from booting
hi
I had this same problem and i resolved it by flashing stock rom via Odin. also, you can try re-installing the previous rom again and then update to new rom by always entering recovery using the 3 key combo..this problem happens when you initiate and update from within android via rom manager or having an app reboot to recovery then installing a rom.
cheers
Alphacode
Do a wipe data and cache
After flashing chobits flash white kernel......;
Atleast this will not brick your phone
Sent from my GT-S5360 using xda premium
Current Rom : Chobits v2 and white kernel with modified sharinganmod and [email protected] tweak
Same problem no solution
gollayanjr said:
After I installed Chobits Digitalis, I can't install another rom, I tried Creed's ROM 3.2 or Ultimate Sonic Rom v5 and it' still stuck at the screen where "Samsung Galaxy Y young S5360" Os displayed. Please help. I'll press thanks to thr onr who helped and respect your feedback. I'm just a newbie here
Sent from my GT-S5360 using xda app-developers app
Click to expand...
Click to collapse
I've tried to install Repencis 3.5 and Chobits V2 reloaded. Tried it with bunch of CWM too.... but still no success with custom ROM yet . I have flashed stock ROM with Odin. But upon reboot always get stuck at boot animation (the one with phone model text). I have followed every step according to the ROM pages, and tried recommended CWM to do it. I have no idea where am I going wrong.
prandroids said:
I've tried to install Repencis 3.5 and Chobits V2 reloaded. Tried it with bunch of CWM too.... but still no success with custom ROM yet . I have flashed stock ROM with Odin. But upon reboot always get stuck at boot animation (the one with phone model text). I have followed every step according to the ROM pages, and tried recommended CWM to do it. I have no idea where am I going wrong.
Click to expand...
Click to collapse
what method did you use to flash stock rom with odin (with one package or without one package) if you have previously tried one package and that flash failed after sometime then dont try the other method(one in which you dont check/choose one package option) it wont work just stick to one package technique till you get it right
---------- Post added at 12:56 AM ---------- Previous post was at 12:42 AM ----------
gollayanjr said:
After I installed Chobits Digitalis, I can't install another rom, I tried Creed's ROM 3.2 or Ultimate Sonic Rom v5 and it' still stuck at the screen where "Samsung Galaxy Y young S5360" Os displayed. Please help. I'll press thanks to thr onr who helped and respect your feedback. I'm just a newbie here
Sent from my GT-S5360 using xda app-developers app
Click to expand...
Click to collapse
I havent tried the rom in question but some roms like repencis have their own inbuilt kernel (mostly it's only compatile with its rom) which replaces our stock kernel so when we try to go back to stock rom or any other rom after that then we are often stuck at boot loop coz that rom isnt compatible with your present kernel
kunal19911 said:
what method did you use to flash stock rom with odin (with one package or without one package) if you have previously tried one package and that flash failed after sometime then dont try the other method(one in which you dont check/choose one package option) it wont work just stick to one package technique till you get it right
---------- Post added at 12:56 AM ---------- Previous post was at 12:42 AM ----------
I havent tried the rom in question but some roms like repencis have their own inbuilt kernel (mostly it's only compatile with its rom) which replaces our stock kernel so when we try to go back to stock rom or any other rom after that then we are often stuck at boot loop coz that rom isnt compatible with your present kernel
Click to expand...
Click to collapse
Next time when u flash stock rom add a totoro file to-for kernel.I do that once after Repencis PDA,CSC MODEM + totoro
i think u hav to mount d system before u flash/install the zip/rom
Sent from my GT-S5360 using xda premium
Are you attempting to flash directly or are you using CWM?
maybe clear cache & data will help.

Lagfix for 2.3.6

Does anyone know or have lagfix for 2.3.6 (XXJW4) ? please share it to me, i cant find one on the google
soulrave said:
Does anyone know or have lagfix for 2.3.6 (XXJW4) ? please share it to me, i cant find one on the google
Click to expand...
Click to collapse
To get lagfix on JW4 easly;
İf you're not rooted , just root it with CF Root link here http://download.chainfire.eu/155/CF-Root/SGS/CF-Root-XX_OXA_JW4-v4.4-CWM3RFS.zip
Then most important part;
http://www.wuala.com/deeeelite/Kernels Ginger/CF-Root-ext4-v1.3-Addon.apk Download and install this apk.This is ext4 tool developed my Chainfire... easy! Just Convert to EXT4 and done!
Also don't forget to change to RFS when you want to flash from odin or a custom rom like ICS/JB or custom GB (Dmore or so... ) from CWM!
Cheers
dreamer94 said:
To get lagfix on JW4 easly;
Just Convert to EXT4 and done!
Also don't forget to change to RFS when you want to flash from odin or a custom rom like ICS/JB or custom GB (Dmore or so... ) from CWM!
Cheers
Click to expand...
Click to collapse
I dont get this part, can you please ?
soulrave said:
I dont get this part, can you please ?
Click to expand...
Click to collapse
When you change the ROM, you convert back to rfs with the ext4 app.
Like dark knight said,yyou need to change back to rfs in same application(ext4 addon app) when you want to flash a rom
GT-I9000 cihazımdan Tapatalk 2 ile gönderildi
dreamer94 said:
Like dark knight said,yyou need to change back to rfs in same application(ext4 addon app) when you want to flash a rom
GT-I9000 cihazımdan Tapatalk 2 ile gönderildi
Click to expand...
Click to collapse
Can you tell me why?
I flash CM9 from 2.3.6 without converting back to rfs and I have no problems.
And I've done it more than once to.
Sent from my GT-I9000 using xda app-developers app
Mr Patchy Patch said:
Can you tell me why?
I flash CM9 from 2.3.6 without converting back to rfs and I have no problems.
And I've done it more than once to.
Sent from my GT-I9000 using xda app-developers app
Click to expand...
Click to collapse
Because only custom kernels supporting EXT4 file system. When you flash another stock rom. stock kernel can't read your EXT4 partitions.
So you don't need to convert EXT4 again but you need to flash a custom kernel with EXT4 again to rom to boot it.
CM using totally different file system. It's using yaffs and ext4. It converts itself whilebyou flashing.
Sent from my GT-I9000 using xda app-developers app
burakgon said:
Because only custom kernels supporting EXT4 file system. When you flash another stock rom. stock kernel can't read your EXT4 partitions.
So you don't need to convert EXT4 again but you need to flash a custom kernel with EXT4 again to rom to boot it.
CM using totally different file system. It's using yaffs and ext4. It converts itself whilebyou flashing.
Sent from my GT-I9000 using xda app-developers app
Click to expand...
Click to collapse
Thanks for that. I understand it now.
What about Odin? Will that have problems to or just overwrite everything if you have re-partition checked?
Sent from my GT-I9000 using xda app-developers app
Mr Patchy Patch said:
Thanks for that. I understand it now.
What about Odin? Will that have problems to or just overwrite everything if you have re-partition checked?
Sent from my GT-I9000 using xda app-developers app
Click to expand...
Click to collapse
Yes it will revert stock file system.
dreamer94 said:
To get lagfix on JW4 easly;
İf you're not rooted , just root it with CF Root link here http://download.chainfire.eu/155/CF-Root/SGS/CF-Root-XX_OXA_JW4-v4.4-CWM3RFS.zip
Then most important part;
http://www.wuala.com/deeeelite/Kernels Ginger/CF-Root-ext4-v1.3-Addon.apk Download and install this apk.This is ext4 tool developed my Chainfire... easy! Just Convert to EXT4 and done!
Also don't forget to change to RFS when you want to flash from odin or a custom rom like ICS/JB or custom GB (Dmore or so... ) from CWM!
Cheers
Click to expand...
Click to collapse
Hi ,
I have installed the apk and converted to ext4 .. and other fixes for speeding up the Phone. I am having a Galaxy S GT I9000 (Indian version )> DDJVB 2.3.6 (valupack 2.3.6) and have just rooted using the kernel > CF-Root-XX_OXA_JVU_2.3.6-v4.3-CWM3RFS . So basically now that the phone is rooted what fixes would you recommend so that the experience is totally GREAT ! I know there are infinite solutions available on the net , hence would be helpful if you could suggest something that is tried and tested. Thanks.
Regards,
Kaustav.
Sorry i don't understand.
Did you say what fixes i can apply after lagfix?
Seems like you want some recommendation .. Hmm i think one of stock firmwares rooted and using with ext4 system would be enough
The best thing you can do i think;
Try Darky 10.4.2 JW1 rom.It is the best custom gb firmware that i've ever seen!
GT-I9000 cihazımdan Tapatalk 2 ile gönderildi
mailppl said:
Hi ,
I have installed the apk and converted to ext4 .. and other fixes for speeding up the Phone. I am having a Galaxy S GT I9000 (Indian version )> DDJVB 2.3.6 (valupack 2.3.6) and have just rooted using the kernel > CF-Root-XX_OXA_JVU_2.3.6-v4.3-CWM3RFS . So basically now that the phone is rooted what fixes would you recommend so that the experience is totally GREAT ! I know there are infinite solutions available on the net , hence would be helpful if you could suggest something that is tried and tested. Thanks.
Regards,
Kaustav.
Click to expand...
Click to collapse
Flash Semaphore 2.7.4 custom kernal.
Sent from my GT-I9000 using xda app-developers app
Mr Patchy Patch said:
Flash Semaphore 2.7.4 custom kernal.
Sent from my GT-I9000 using xda app-developers app
Click to expand...
Click to collapse
Hi Patchy ,
So can I flash this over CF-Root-XX_OXA_JW4-v4.4-CWM3RFS , which I have used today to root my phone which is an Indian version DDJVB 2.3.6 (valupack 2.3.6). If yes could you kindly share the download link ?
---------- Post added at 10:05 PM ---------- Previous post was at 09:49 PM ----------
dreamer94 said:
Sorry i don't understand.
Did you say what fixes i can apply after lagfix?
Seems like you want some recommendation .. Hmm i think one of stock firmwares rooted and using with ext4 system would be enough
The best thing you can do i think;
Try Darky 10.4.2 JW1 rom.It is the best custom gb firmware that i've ever seen!
GT-I9000 cihazımdan Tapatalk 2 ile gönderildi
Click to expand...
Click to collapse
Hi dreamer,
I have actually done the ext4 conversion, but I dont find much difference in the lag , the phone still seems a bit slow, hence I was asking for other alternatives like a better custom ROM (though I am not to keen and would like to stay with the stock ROM if possible) , or cpu overclocking , or some lag fix available . My phone is on gb 2.3.6 DDJVB Indian version and has been rooted today using Odin and kernel CF-Root-XX_OXA_JW4-v4.4-CWM3RFS. Sorry for all the questions , I am a newbie here..so please bear
mailppl said:
Hi Patchy ,
So can I flash this over CF-Root-XX_OXA_JW4-v4.4-CWM3RFS , which I have used today to root my phone which is an Indian version DDJVB 2.3.6 (valupack 2.3.6). If yes could you kindly share the download link ?
---------- Post added at 10:05 PM ---------- Previous post was at 09:49 PM ----------
Hi dreamer,
I have actually done the ext4 conversion, but I dont find much difference in the lag , the phone still seems a bit slow, hence I was asking for other alternatives like a better custom ROM (though I am not to keen and would like to stay with the stock ROM if possible) , or cpu overclocking , or some lag fix available . My phone is on gb 2.3.6 DDJVB Indian version and has been rooted today using Odin and kernel CF-Root-XX_OXA_JW4-v4.4-CWM3RFS. Sorry for all the questions , I am a newbie here..so please bear
Click to expand...
Click to collapse
Yes you can flash it over. I dont have the link, but google search "semaphore 2.7.4 xda" and you should easily find it.
I flash the kernal via pda in odin.
Sent from my GT-I9000 using xda app-developers app
Mr Patchy Patch said:
Yes you can flash it over. I dont have the link, but google search "semaphore 2.7.4 xda" and you should easily find it.
I flash the kernal via pda in odin.
Sent from my GT-I9000 using xda app-developers app
Click to expand...
Click to collapse
Hi Patchy,
Flashed the semaphore 2.7.4 ... working pretty good..smooth. But found the screen display to be different, there was a greenish tinge to it (specially when screen goes on/off) but this has resolved after Semaphore auto brightness enabling in the semaphore app. What other tweaks would you recommend using this kernel ? What does the busybox exactly do? I mean what would happen if I enable it and also do you recommend overclocking to 1.2Ghz ? Thanks for all the help and PATIENCE
mailppl said:
Hi Patchy,
Flashed the semaphore 2.7.4 ... working pretty good..smooth. But found the screen display to be different, there was a greenish tinge to it (specially when screen goes on/off) but this has resolved after Semaphore auto brightness enabling in the semaphore app. What other tweaks would you recommend using this kernel ? What does the busybox exactly do? I mean what would happen if I enable it and also do you recommend overclocking to 1.2Ghz ? Thanks for all the help and PATIENCE
Click to expand...
Click to collapse
The colors on your screen are different because its "voodoo color" in my opinion looks awesome.
I always OC to 1.2 and set my touch screen sensitivity to the middle option (forget what its called) you'll find that under additional kernal tweaks in semaphore manager. I also modify my build.prop a lot under system/build.prop. using root explorer.
Just leave busy box alone. Don't worry about it. But after flashing semaphore 2.7.4 your going to need to download super user from the market to gain root access again.
Sent from my GT-I9000 using xda app-developers app
Mr Patchy Patch said:
The colors on your screen are different because its "voodoo color" in my opinion looks awesome.
I always OC to 1.2 and set my touch screen sensitivity to the middle option (forget what its called) you'll find that under additional kernal tweaks in semaphore manager. I also modify my build.prop a lot under system/build.prop. using root explorer.
Just leave busy box alone. Don't worry about it. But after flashing semaphore 2.7.4 your going to need to download super user from the market to gain root access again.
Sent from my GT-I9000 using xda app-developers app
Click to expand...
Click to collapse
Hi,
Yep I have installed super user from the market. About overclocking , whenever I am setting it to 1.2 , after sometime when I check it shows as 1Ghz selected. Also for over clocking , I see it at two places - under Misc. there is overclocking test apart from the normal overclocking change tab .. do i need to change at both the places ?
mailppl said:
Hi,
Yep I have installed super user from the market. About overclocking , whenever I am setting it to 1.2 , after sometime when I check it shows as 1Ghz selected. Also for over clocking , I see it at two places - under Misc. there is overclocking test apart from the normal overclocking change tab .. do i need to change at both the places ?
Click to expand...
Click to collapse
I've noticed it changed back to, but only when I rebooted my phone. Otherwise no problems.
Sent from my GT-I9000 using xda app-developers app
mailppl;
To fix the greenish color issue while locking screen,alternativly flash a xlcrt off effect for jw4 .Cant give a link right now but you said you are on indian version.Crt off effect must be specific for rom i mean you cant flash jw4 effect to indian rom because roms are different .You will lose status bar if you do that.
You must be on european version which is jw4 .Then you can flash that crt effect...
I'm from Turkey and time is 10am right now.I will at my home about 9pm so... if you really wanna use ;
lagfix
Semaphore kernel with voodoo also without greeny color,
Flash JW4 firmware (XXJW4). Then flash semaphore kernel and apply lagfix... When i'll get home ,i:ll send you a link of crt effect
Also you can search the thread of it if you dont wanna wait
Thread belongs to pantrif13 as long as i remember...
GT-I9000 cihazımdan Tapatalk 2 ile gönderildi

[Q] JELLYBLASTV3.signed

Help please,
try to install JELLYBLASTV3.signed on samsung galaxy S5360.
After reboot the systems hangs on startup screen.
JELLYBLAST from earlyer did fine
Dude go into cmw m0de wipe cache and data + dalvik cache and try to reinstall jelly blast then apply OTA updates one by one
Sending from SgY via TT2
Rom:JellyBlast v3.0.4
Kernel:Kuro
my first custom kernel & rom
waiting 4 Nemisis One
Thank you for the quick reply, go to try it
Hefaistos said:
Help please,
try to install JELLYBLASTV3.signed on samsung galaxy S5360.
After reboot the systems hangs on startup screen.
JELLYBLAST from earlyer did fine
Click to expand...
Click to collapse
that means u have a problem bootloop....flash jbv3 again by clearing data+cache+delvic cache..........flash all 4 otas....done enjoy :laugh:
hariskoirala said:
that means u have a problem bootloop....flash jbv3 again by clearing data+cache+delvic cache..........flash all 4 otas....done enjoy :laugh:
Click to expand...
Click to collapse
Have tried that without results,
Now running Jellyblast V3 rom version 3.0.0 without problems
What jelly blast gave me a bundle of bugs and problems.
First of all no widgets tab is there..
I've lost my status bar...
Phone hangs after every 2 minute :banghead:
Sent from my GT-S5360 using xda app-developers app
---------- Post added at 06:19 PM ---------- Previous post was at 06:15 PM ----------
I have same problem too... Your all systam app memory is erased now so you cant even able to flash a rom so go to service centre and they do all repairing for free because they are unable to know that you phone is rooted because all files are erased. Hit thanks if i've helped you....
Sent from my GT-S5360 using xda app-developers app
Hefaistos said:
Have tried that without results,
Now running Jellyblast V3 rom version 3.0.0 without problems
Click to expand...
Click to collapse
Flash back to stock rom.. and try a clean install of jellyblast with its all 5 update..
install one by one with proper reboots no need of CW M recovery. Stock recovery is enough..
Did u wait for a hour first start takes some time .. Clear dalvik cache,cache and restart the phone and install all five ota it should be working good with kuro kernel...
Sent from my GT-S5360 using xda app-developers app

[Q] Installing EXT4_Converter.signed error booting Samsung galaxy y gt-s5360

Hi there:-
I need help about samsung galaxy y gt-s5360:-
the problem is this that i have installed EXT4_Converter.signed on my samsung galaxy y gt-s5360 than after that i have install the rom of jelly blast v3 that was successfully completed than after that it wan't to be reboot after that i have reboot that than on the screen it will not load and boot on screen there is just show that SAMSUNG GALAXY Y GT-S5360 than after that it will not load and did not boot...
soooo plzzzzz I need the help that EXT4_Converter.signed is used for what???
and also sorry for my bad english..
so if any one who knows the problem please share that to me aswell if any software for that please i need the help
Ext4 converter used for convert your system and sd-ext to ext4 from the default ext3 or ext2. I think the kernel of jbv3 not compatible with that mod
Sent from my GT-S5360 using Xparent ICS Tapatalk 2
hizzzzzz said:
Ext4 converter used for convert your system and sd-ext to ext4 from the default ext3 or ext2. I think the kernel of jbv3 not compatible with that mod
Sent from my GT-S5360 using Xparent ICS Tapatalk 2
Click to expand...
Click to collapse
thanks
so now what should i do can please show me it can't be booted
please if you know please say to me...
Please show how to Convert EXT4 to EXT3 or EXT2 please i need..
zabeh said:
Hi there:-
I need help about samsung galaxy y gt-s5360:-
the problem is this that i have installed EXT4_Converter.signed on my samsung galaxy y gt-s5360 than after that i have install the rom of jelly blast v3 that was successfully completed than after that it wan't to be reboot after that i have reboot that than on the screen it will not load and boot on screen there is just show that SAMSUNG GALAXY Y GT-S5360 than after that it will not load and did not boot...
soooo plzzzzz I need the help that EXT4_Converter.signed is used for what???
and also sorry for my bad english..
so if any one who knows the problem please share that to me aswell if any software for that please i need the help
Click to expand...
Click to collapse
1)first flash stock rom now....
after that install jellyblast rom and update it.....
2)after that flash merruks pre final 2 via odin....
3)now backup ur rom with cwm>>go to backup & restore>>backup
4)after backup flash ext4 converter.zip
5)than go to backup & restore>>advanced restore & restore only system ,data & cache....dont restore boot.img
6)now reboot.Merruk kernel 2.5 is installed in ur device.....
Sent from my GT-S5360 using xda app-developers app
zabeh said:
Hi there:-
I need help about samsung galaxy y gt-s5360:-
the problem is this that i have installed EXT4_Converter.signed on my samsung galaxy y gt-s5360 than after that i have install the rom of jelly blast v3 that was successfully completed than after that it wan't to be reboot after that i have reboot that than on the screen it will not load and boot on screen there is just show that SAMSUNG GALAXY Y GT-S5360 than after that it will not load and did not boot...
soooo plzzzzz I need the help that EXT4_Converter.signed is used for what???
and also sorry for my bad english..
so if any one who knows the problem please share that to me aswell if any software for that please i need the help
Click to expand...
Click to collapse
Are you trying to install Merruk kernel 2.5?
If so, follow the steps done by revanescence. :good:
Originally Posted by revanescence
Hi i was in jellyblast i successfully installed latest version for merruk kernel deluxe.
Without bug and no lag
Just follow my steps : ( working )
-flash fresh stock rom
-flash jellyblastv 3
-update jellyblast to 3.0.2
-flash merruk kernel pre-final 2.0 via odin or method from mai77 ( CWM)
-Backup your rom via CWM
-Flash via CWM ext4convertsigned.zip ( its kernel + Ext4convert + reset bin)
-restore your system/data and cache via backup/advance restore. Do not restore boot.img
-flash module elite.zip
- its done
Here the merruk kernel pre-final 2.0 http://forum.xda-developers.com/atta...9&d=1336694938
Here the module from elite version http://forum.xda-developers.com/atta...4&d=1349642823
Here the merruk kernel deluxe version #206 http://www.mediafire.com/?c5nl1cf4cye6px4
Click to expand...
Click to collapse
JBV3 link: http://forum.xda-developers.com/showthread.php?t=1679563
zabeh said:
thanks
so now what should i do can please show me it can't be booted
please if you know please say to me...
Please show how to Convert EXT4 to EXT3 or EXT2 please i need..
Click to expand...
Click to collapse
Simple way: repartition your sdcard bro, that's will solve all your problem
Sent from my GT-S5360 using Xparent ICS Tapatalk 2
Thanks:-
But how to partition that any software you know please the link of that...
I can't format/partition my samsung galaxy y gt-s5360 with odin...
when i connect the mobile to the computer the driver which list in device manager will not take that...
so how i should do... and it can't be connected with odin....
sorry for bad english language
when i turn on the samsung galaxy y gt-s5360 on the screen just display samsung galaxy y gt-s5360 and then it will not be loaded and not be booted.
so the other question that i need the rom android version 2.3.6 for galaxy y gt-s5360.
and what is the sd-ext of android 2.3.6.(EXT4,EXT3,EXT2,Or Rfs) please i need the answer if any one know about that please help me..
???
zabeh said:
Thanks:-
But how to partition that any software you know please the link of that...
I can't format/partition my samsung galaxy y gt-s5360 with odin...
when i connect the mobile to the computer the driver which list in device manager will not take that...
so how i should do... and it can't be connected with odin....
sorry for bad english language
when i turn on the samsung galaxy y gt-s5360 on the screen just display samsung galaxy y gt-s5360 and then it will not be loaded and not be booted.
so the other question that i need the rom android version 2.3.6 for galaxy y gt-s5360.
and what is the sd-ext of android 2.3.6.(EXT4,EXT3,EXT2,Or Rfs) please i need the answer if any one know about that please help me..
???
Click to expand...
Click to collapse
for ur pc to recognise ur device proper driver must b installed....
download the samsung drivers from here-Samsung Drivers
install it and reboot ur pc....after that odin will recognise ur device.....
and for partitioning ur sdcard use cwm
go to advanced>>>partition sdcard>>select ext3>>select swap=0>>choose ur desired size of second partition>>done
do backup of all ur data in ur sdcard as sdcard will b formatted while partitioning.....
Thanks:-
but i have installed this software many times but it doesn't work and the driver will not be recognized in device manager...
so now what should i do???
please again help me if anyone who knows
zabeh said:
Thanks:-
but i have installed this software many times but it doesn't work and the driver will not be recognized in device manager...
so now what should i do???
please again help me if anyone who knows
Click to expand...
Click to collapse
install kies or enable usb debugging in ur phn also.....
Sent from my GT-S5360 using xda app-developers app
anmolsharma1293 said:
install kies or enable usb debugging in ur phn also.....
Sent from my GT-S5360 using xda app-developers app
Click to expand...
Click to collapse
Yea, choose usb debugging on your setting.
You can also partition your sdcard with cwm, it's more easy to use and did not need any pc or programs inside it
Sent from my GT-S5360 using Xparent ICS Tapatalk 2
hizzzzzz said:
Ext4 converter used for convert your system and sd-ext to ext4 from the default ext3 or ext2. I think the kernel of jbv3 not compatible with that mod
Sent from my GT-S5360 using Xparent ICS Tapatalk 2
Click to expand...
Click to collapse
What Is the use of changing to ext 4
Is it faster?
==============================
Keep calm and hit T H A N K S
sanny5 said:
What Is the use of changing to ext 4
Is it faster?
==============================
Keep calm and hit T H A N K S
Click to expand...
Click to collapse
"As I know" ext4 is the newest memory format in linux, certainly it can works more faster
Sent from my GT-S5360 using Xparent ICS Tapatalk 2
hizzzzzz said:
Ext4 converter used for convert your system and sd-ext to ext4 from the default ext3 or ext2. I think the kernel of jbv3 not compatible with that mod
Sent from my GT-S5360 using Xparent ICS Tapatalk 2
Click to expand...
Click to collapse
try to install merruk kernel merruk kernel have ext4 converter..... I overclock my phone always when I flash jbv3.... bro... I flash ext4 and nothing happen
waiting for nemesis more days to go
sent via GT-S5360
rom jellyblastV3.0.4
Overclock 1.2GHz
I love You! <3
HizEki said:
Simple way: repartition your sdcard bro, that's will solve all your problem
Sent from my GT-S5360 using Xparent ICS Tapatalk 2
Click to expand...
Click to collapse
Thank You! THANK YOU! You saved my life and SGY!!!! Really! I wasn't boot up and there was a problem with the E: mount/system! And the PC dindn't detected my phone! Now I successfully restored with Odin my stock ROM! My thanks will chase You forever! You saved my day! xD
~ Greetings ~

Error Error Error !! :(

Guyz plz help me out... I am unable to run many apps after installing.. Lyk facebook n youtube
I am on stock rom - DDLK2 with hells fusion #50 kernal....
Plxx plzzz...
Aman D Awsm said:
Guyz plz help me out... I am unable to run many apps after installing.. Lyk facebook n youtube
I am on stock rom - DDLK2 with hells fusion #50 kernal....
Plxx plzzz...
Click to expand...
Click to collapse
reinstall all apps or do a data and chache reset..:good:
I had done it many tyms.....
Bt same problem arrises...
re flash stock rom Via Odin
Sent from my GT-S5360 using Xparent ICS Tapatalk 2
Nw i dNt hv computr..... Plzz giv sm solutn frm phone only...
either flash the stock kernel back (search here in android general info for sir dokys stock kernel compilation)
or flash other custom kernel like white
or ask sir hell lock about your concern.
Yeah.... Thnkz man
I'll ask hell lock sir soon....
Hoping iT works
Go to recovery nd clear data nd cache
** rooting is new for me,
nd i am a noob to root....**
I had done it already manytyms... But none works for meh
Move apps to SD card from internal memory card . .
Thread Closed.....
Mine problem solved
Aman D Awsm said:
Thread Closed.....
Mine problem solved
Click to expand...
Click to collapse
How
Sent from my GT-S5360 using xda app-developers app
hell_lock said:
How
Sent from my GT-S5360 using xda app-developers app
Click to expand...
Click to collapse
Sry sir .... But in ur kernal i replace some files wid stock and then i applied clear dalvik cache... And then its done
All apps are now working..

Categories

Resources