After installing ChobitsDigitalis ROM... - Galaxy Y GT-S5360 and Duos 6102 Q&A, Help & Troubl

After I installed Chobits Digitalis, I can't install another rom, I tried Creed's ROM 3.2 or Ultimate Sonic Rom v5 and it' still stuck at the screen where "Samsung Galaxy Y young S5360" Os displayed. Please help. I'll press thanks to thr onr who helped and respect your feedback. I'm just a newbie here
Sent from my GT-S5360 using xda app-developers app

Already tried to wipe data, cache and dalvik-cache?
Or tried to install stock rom before the custom?

You shud always install a custom rom on a stock rom..
U can get the stock rom from here
http://forum.xda-developers.com/showthread.php?t=1465800
Sent from my GT-S5360 using xda premium

gu200123 said:
Already tried to wipe data, cache and dalvik-cache?
Or tried to install stock rom before the custom?
Click to expand...
Click to collapse
Already tried it. Its the same.
Sent from my Samsung Galaxy Y S5360 Smart Gold 3G Using XDA developers app.

I dont really know what problem is this, I had the same. Just ChobitsDigitalis worked. And I loved it

gollayanjr said:
Already tried it. Its the same.
Click to expand...
Click to collapse
You have to find the rom included with kernel..like repencis 3.5..if u don't like the theme you can change it..
Sent from my GT-S5360

at first flash a stockkernel than wipe all(data/cache)than flash new firmware.

gollayanjr said:
Already tried it. Its the same.
Sent from my Samsung Galaxy Y S5360 Smart Gold 3G Using XDA developers app.
Click to expand...
Click to collapse
Are you sure sir? Usually going back to stock ROM and kernel solves it. Try again to go to stock, then reflash Chobits; and be sure to follow the instructions carefully. :good:

gollayanjr said:
After I installed Chobits Digitalis, I can't install another rom, I tried Creed's ROM 3.2 or Ultimate Sonic Rom v5 and it' still stuck at the screen where "Samsung Galaxy Y young S5360" Os displayed. Please help. I'll press thanks to thr onr who helped and respect your feedback. I'm just a newbie here
Sent from my GT-S5360 using xda app-developers app
Click to expand...
Click to collapse
1st Wipe data then re-install chobits digitalis Rom then reboot it will take much time so wait. Then install merruk kernal or any other kernel on your sgy.after successfully installing new kernel go to recovery mode,then install creed rom......
i hope it will be installed on ur sgy.. Now Wait 2-3 minutes for rebooting............
Is that method work???? Plz let me know,,,,,,,
Sent from my GT-S5360 using xda premium

i'm not sure about your problem but i have successfully flashed chobitdigitalis from repencis and i also succeed in reverting to repencis.
i flashed chobits, while my phone is on repencis.
then i reverted to repencis by restoring my nandroid back up of repencis. i didn't even wiped data, system or cache. just restored my backup.

Flash stock kernel via cwm or odin and reflash the rom. Remember to wipe data and cache partition otherwise you can experience bootloops. You have been facing this problem because chobits digitalis rom has its own custom kernel.
Sent from my GT-S5360 using Tapatalk 2

changeing roms halts system from booting
hi
I had this same problem and i resolved it by flashing stock rom via Odin. also, you can try re-installing the previous rom again and then update to new rom by always entering recovery using the 3 key combo..this problem happens when you initiate and update from within android via rom manager or having an app reboot to recovery then installing a rom.
cheers
Alphacode

Do a wipe data and cache
After flashing chobits flash white kernel......;
Atleast this will not brick your phone
Sent from my GT-S5360 using xda premium
Current Rom : Chobits v2 and white kernel with modified sharinganmod and [email protected] tweak

Same problem no solution
gollayanjr said:
After I installed Chobits Digitalis, I can't install another rom, I tried Creed's ROM 3.2 or Ultimate Sonic Rom v5 and it' still stuck at the screen where "Samsung Galaxy Y young S5360" Os displayed. Please help. I'll press thanks to thr onr who helped and respect your feedback. I'm just a newbie here
Sent from my GT-S5360 using xda app-developers app
Click to expand...
Click to collapse
I've tried to install Repencis 3.5 and Chobits V2 reloaded. Tried it with bunch of CWM too.... but still no success with custom ROM yet . I have flashed stock ROM with Odin. But upon reboot always get stuck at boot animation (the one with phone model text). I have followed every step according to the ROM pages, and tried recommended CWM to do it. I have no idea where am I going wrong.

prandroids said:
I've tried to install Repencis 3.5 and Chobits V2 reloaded. Tried it with bunch of CWM too.... but still no success with custom ROM yet . I have flashed stock ROM with Odin. But upon reboot always get stuck at boot animation (the one with phone model text). I have followed every step according to the ROM pages, and tried recommended CWM to do it. I have no idea where am I going wrong.
Click to expand...
Click to collapse
what method did you use to flash stock rom with odin (with one package or without one package) if you have previously tried one package and that flash failed after sometime then dont try the other method(one in which you dont check/choose one package option) it wont work just stick to one package technique till you get it right
---------- Post added at 12:56 AM ---------- Previous post was at 12:42 AM ----------
gollayanjr said:
After I installed Chobits Digitalis, I can't install another rom, I tried Creed's ROM 3.2 or Ultimate Sonic Rom v5 and it' still stuck at the screen where "Samsung Galaxy Y young S5360" Os displayed. Please help. I'll press thanks to thr onr who helped and respect your feedback. I'm just a newbie here
Sent from my GT-S5360 using xda app-developers app
Click to expand...
Click to collapse
I havent tried the rom in question but some roms like repencis have their own inbuilt kernel (mostly it's only compatile with its rom) which replaces our stock kernel so when we try to go back to stock rom or any other rom after that then we are often stuck at boot loop coz that rom isnt compatible with your present kernel

kunal19911 said:
what method did you use to flash stock rom with odin (with one package or without one package) if you have previously tried one package and that flash failed after sometime then dont try the other method(one in which you dont check/choose one package option) it wont work just stick to one package technique till you get it right
---------- Post added at 12:56 AM ---------- Previous post was at 12:42 AM ----------
I havent tried the rom in question but some roms like repencis have their own inbuilt kernel (mostly it's only compatile with its rom) which replaces our stock kernel so when we try to go back to stock rom or any other rom after that then we are often stuck at boot loop coz that rom isnt compatible with your present kernel
Click to expand...
Click to collapse
Next time when u flash stock rom add a totoro file to-for kernel.I do that once after Repencis PDA,CSC MODEM + totoro

i think u hav to mount d system before u flash/install the zip/rom
Sent from my GT-S5360 using xda premium

Are you attempting to flash directly or are you using CWM?

maybe clear cache & data will help.

Related

[Q] Help Galaxy y JellyBlastv3.0.3

i already done updating JellyBlast 3.0.1 and 3.0.2 after i flash v3.0.3 its stock in the first boot screen and not working..what is the problem?
please help.
sorry for bad english..
mayei said:
i already done updating JellyBlast 3.0.1 and 3.0.2 after i flash v3.0.3 its stock in the first boot screen and not working..what is the problem?
please help.
sorry for bad english..
Click to expand...
Click to collapse
clear cache and dalvik cache....
than it will boot up....
Sent from my GT-S5360 using xda app-developers app
anmolsharma1293 said:
clear cache and dalvik cache....
than it will boot up....
Sent from my GT-S5360 using xda app-developers app
Click to expand...
Click to collapse
where can i find that 2 cache?sorry for the noob question >.<
On cwm clear cache partition
mayei said:
where can i find that 2 cache?sorry for the noob question >.<
Click to expand...
Click to collapse
its on clockworkmod recovery....
click on clear cache partition...than go to advanced and click on clear dalvik cache....its done
Sent from my GT-S5360 using xda app-developers app
Akash vibhute said:
On cwm clear cache partition
Click to expand...
Click to collapse
cant wipe..its says E:can't mount / cache recovery/last_log.. please help
mayei said:
cant wipe..its says E:can't mount / cache recovery/last_log.. please help
Click to expand...
Click to collapse
click on mount & storage....than mount cache...than do the wiping
Sent from my GT-S5360 using xda app-developers app
need to update to jbv3.0.3
hey i use jbv3 in galaxy y! its awesome..i couldnt update from 3.0.0 to 3.0.3 through OTA..
so through flashing zip file can i do?
AND IF SO should i update it first to 3.0.1 and 3.0.2 before updating to 3.0.3? or can i update directly using 3.0.3 flashable zip?
somebody pls do help ..sry for bad english..pls help
barath kannan said:
hey i use jbv3 in galaxy y! its awesome..i couldnt update from 3.0.0 to 3.0.3 through OTA..
so through flashing zip file can i do?
AND IF SO should i update it first to 3.0.1 and 3.0.2 before updating to 3.0.3? or can i update directly using 3.0.3 flashable zip?
somebody pls do help ..sry for bad english..pls help
Click to expand...
Click to collapse
download files of ota update from jellyblast thread....only ota 2 &3 r needed....ota 1 not needed...
its given on first page ....
flash the zips via cwm...and do wipe cache and dalvik cache....
Sent from my GT-S5360 using xda app-developers app
anmolsharma1293 said:
click on mount & storage....than mount cache...than do the wiping
Sent from my GT-S5360 using xda app-developers app
Click to expand...
Click to collapse
E:error mount cache its say..
which recovery u r using...???
clockworkmod or stock recovery that comes with phn...
Sent from my GT-S5360 using xda app-developers app
anmolsharma1293 said:
which recovery u r using...???
clockworkmod or stock recovery that comes with phn...
Sent from my GT-S5360 using xda app-developers app
Click to expand...
Click to collapse
clockworkmod..GTS5360-cwm.zip.
mayei said:
clockworkmod..GTS5360-cwm.zip.
Click to expand...
Click to collapse
Ok..
Try flashing your jellyblast again...
And then update it via ota feature..
need to update to jbv3.0.3
updated to 3.0.3 successfuly! but my status bar s not working!! i get message as force close!
barath kannan said:
updated to 3.0.3 successfuly! but my status bar s not working!! i get message as force close!
Click to expand...
Click to collapse
dont use statusbar mods...
their is bug on that....
just restart ur phn....than status bar will come back
Sent from my GT-S5360 using xda app-developers app
thanks alot! now everything fine!
enjoying with 3.0.3 version :laugh:
well can u pls tell how to overclock ?
---------- Post added at 11:21 PM ---------- Previous post was at 10:49 PM ----------
ya its kuroz!
barath kannan said:
thanks alot! now everything fine!
enjoying with 3.0.3 version :laugh:
well can u pls tell how to overclock ?
---------- Post added at 11:21 PM ---------- Previous post was at 10:49 PM ----------
ya its kuroz!
Click to expand...
Click to collapse
what did you do?im stock in JBV3.0.2..whenever i flash the JBVOTA3 and boot..its stock in the Galaxy Y GT-S5360 Screen(Before the S Animation)and never continue..whats the problem?
This is ive done so far..
Root My SGY
Install CWM
Flash JBV3 works fine
Flash JBVOTA1 works fine
Flash JBVOTA2 works fine
but..Flash JBVOTA3 stock at the Boot Screen Galaxy Y GT-S5360(Before the "S" Animation)
whats the problem?anyone can help me to fix this problem please?
Help ?
I want to know that if my phone will brick if i enlarge the phone internal memory, overclock the cpu and gpu speed, install a rom and install chainfire 3D will it brick ? I also want to know that if after installing a jellyblast V3 rom and installing chainfire 3D will it brick too ? And can I flash merruk kernel Final Version 1.0.8 before flashing merruk kernel Deluxe Edition via odin mode and how to install these kernels. Please give me the steps ( how to go into odin mode and how to install merruk kernel Deluxe Edition ), thanks for anyone who helps. :laugh:
p.s. my English is very bad ( sorry for asking so much because I am a new member )
JELLYBLAST V3 rom + Merruk kernel Deluxe Edition = best rom and 1.248 Ghz phone ! ( for me... )
alexbrian21 said:
I want to know that if my phone will brick if i enlarge the phone internal memory, overclock the cpu and gpu speed, install a rom and install chainfire 3D will it brick ? I also want to know that if after installing a jellyblast V3 rom and installing chainfire 3D will it brick too ? And can I flash merruk kernel Final Version 1.0.8 before flashing merruk kernel Deluxe Edition via odin mode and how to install these kernels. Please give me the steps ( how to go into odin mode and how to install merruk kernel Deluxe Edition ), thanks for anyone who helps. :laugh:
p.s. my English is very bad ( sorry for asking so much because I am a new member )
JELLYBLAST V3 rom + Merruk kernel Deluxe Edition = best rom and 1.248 Ghz phone ! ( for me... )
Click to expand...
Click to collapse
Try the search feature offered by xda and you will get answer for all your questions ..
Flashing Rom and kernel won't brick your phone if you follow procedures correctly.
If flashing Rom was going to brick the phones then there wouldnt have a single custom rom in development section..

[Q] [Please HELP] Galaxy Y duos, ROM Problem

Hey guys, It was just that , I was going through the net and wanted to port a rom to my Galaxy Y duos (GT-S6102), while the rom was originally for Galaxy Y, heres the ROM http://forum.xda-developers.com/showthread.php?t=1863227 , using this method : http://forum.xda-developers.com/showthread.php?t=1908008 . It obviously didnt work. now I flashed With ICS Fusion, which was running previously, but the launcher of the previous Rom , that is CoD Home turns up on this rom! Couldnt find a way to delete it, and the Satusbar is also crashing constantly. Then I flashed The Deodexed Stock Rom DDLG1 and again both the launchers from the previous two Roms (CoD home and Holo Loauncher) appears. So I went into CWM and formatted data,system,and cache...Now its not booting at all, flashed the stock rom,none of them are booting.. Help me! Please Help!
Look at my signature for hatyonrom thread. Follow the instructions on flashing my custom rom on page 2and it will work for you. I did not say download my rom. Use your own rom but follow my intallation guide.
Sent from my GT-B5512 using Tapatalk 2
Its Okay now!
arbayong said:
Look at my signature for hatyonrom thread. Follow the instructions on flashing my custom rom on page 2and it will work for you. I did not say download my rom. Use your own rom but follow my intallation guide.
Sent from my GT-B5512 using Tapatalk 2
Click to expand...
Click to collapse
Its okay, didnt require to do anythng, just flashed the stock rom once again after wiping and clearing everythng, thanks for your help

[Q] JELLYBLASTV3.signed

Help please,
try to install JELLYBLASTV3.signed on samsung galaxy S5360.
After reboot the systems hangs on startup screen.
JELLYBLAST from earlyer did fine
Dude go into cmw m0de wipe cache and data + dalvik cache and try to reinstall jelly blast then apply OTA updates one by one
Sending from SgY via TT2
Rom:JellyBlast v3.0.4
Kernel:Kuro
my first custom kernel & rom
waiting 4 Nemisis One
Thank you for the quick reply, go to try it
Hefaistos said:
Help please,
try to install JELLYBLASTV3.signed on samsung galaxy S5360.
After reboot the systems hangs on startup screen.
JELLYBLAST from earlyer did fine
Click to expand...
Click to collapse
that means u have a problem bootloop....flash jbv3 again by clearing data+cache+delvic cache..........flash all 4 otas....done enjoy :laugh:
hariskoirala said:
that means u have a problem bootloop....flash jbv3 again by clearing data+cache+delvic cache..........flash all 4 otas....done enjoy :laugh:
Click to expand...
Click to collapse
Have tried that without results,
Now running Jellyblast V3 rom version 3.0.0 without problems
What jelly blast gave me a bundle of bugs and problems.
First of all no widgets tab is there..
I've lost my status bar...
Phone hangs after every 2 minute :banghead:
Sent from my GT-S5360 using xda app-developers app
---------- Post added at 06:19 PM ---------- Previous post was at 06:15 PM ----------
I have same problem too... Your all systam app memory is erased now so you cant even able to flash a rom so go to service centre and they do all repairing for free because they are unable to know that you phone is rooted because all files are erased. Hit thanks if i've helped you....
Sent from my GT-S5360 using xda app-developers app
Hefaistos said:
Have tried that without results,
Now running Jellyblast V3 rom version 3.0.0 without problems
Click to expand...
Click to collapse
Flash back to stock rom.. and try a clean install of jellyblast with its all 5 update..
install one by one with proper reboots no need of CW M recovery. Stock recovery is enough..
Did u wait for a hour first start takes some time .. Clear dalvik cache,cache and restart the phone and install all five ota it should be working good with kuro kernel...
Sent from my GT-S5360 using xda app-developers app

Need Help Please my SGY S5360 Bootloop?

Guys i have a problem. My galaxy y s5360 keep booting after installing new application (apk) and after rebooting i try other application but it's the same . I tried to install new custom rom but the problem is still there. Can anyone have the same problem here? Need help to fix it..
Go to stock recovery and clear data/factory reset and cache partition.
Reboot
What custom ROM did you install?
And of course what is the app you installed?
sent from my Galaxy Y
also try dis clear cache and data in stock also in cwm,format system and flash a stock or custom rom..
☆★☆★☆★☆★☆★☆★☆★☆★
Is your problem solved
Or it dont work flash a kernel
Want To Ask Question? Ask Here
Thanks,
TechnoSavie
BarJei said:
Go to stock recovery and clear data/factory reset and cache partition.
Reboot
What custom ROM did you install?
And of course what is the app you installed?
sent from my Galaxy Y
Click to expand...
Click to collapse
Im using zCreeds Fusion 3.2 custom rom.
i tried to install the application called link2sd, and my phone restarts at creed's rom welcome screen and i tried another applicaton viber, Agingbooth etc. all are the same (..
deathfalls said:
also try dis clear cache and data in stock also in cwm,format system and flash a stock or custom rom..
☆★☆★☆★☆★☆★☆★☆★☆★
Click to expand...
Click to collapse
It wont work. ( still the same.
telement10 said:
Im using zCreeds Fusion 3.2 custom rom.
It wont work. ( still the same.
Click to expand...
Click to collapse
Flash it with ODIN
And then try
I prefer Creed 3.5 very good without bugs
And
Here Is Link With Complete Guide
How To Flash Stock Rom..
Thumbs Up..
www.galaxy4gaming.in/2012/07/flashing-stock-rom-via-odin-on-galaxy-y.html?m=1
D_Rising_Pheonix said:
And
Here Is Link With Complete Guide
How To Flash Stock Rom..
Thumbs Up..
www.galaxy4gaming.in/2012/07/flashing-stock-rom-via-odin-on-galaxy-y.html?m=1
Click to expand...
Click to collapse
Hey Wats ur custom rom DX-rom?
I suggest you flash via odin and install evolution x3
Want To Ask Question? Ask Here
Thanks,
TechnoSavie

[Q] WiFi not working after trying to root!!

I tried to root and install ROM evo-4.2 my samsung galaxy y.Firstly, I backup ed the data using clockwork mod recovery(CWM).Then I rooted my phone.After clearing data I installed Hells Fusion Kernel. I flashed the ROM,then rebooted my phone.My phone was not restarting(only "samsung galaxy y"was visible).Then I left the idea of installing ROM and restored the backup using CWM. My phone started ,but now I cannot connect to my WiFi.The WiFi network is not visible even though I am very close to it. Also, I cannot view my stock Recovery...My phone directly boots into CWM.
Please Help me to enable my phone WiFi...
shubham.bhavsar said:
I tried to root and install ROM evo-4.2 my samsung galaxy y.Firstly, I backup ed the data using clockwork mod recovery(CWM).Then I rooted my phone.After clearing data I installed Hells Fusion Kernel. I flashed the ROM,then rebooted my phone.My phone was not restarting(only "samsung galaxy y"was visible).Then I left the idea of installing ROM and restored the backup using CWM. My phone started ,but now I cannot connect to my WiFi.The WiFi network is not visible even though I am very close to it. Also, I cannot view my stock Recovery...My phone directly boots into CWM.
Please Help me to enable my phone WiFi...
Click to expand...
Click to collapse
Flash the stock wifi driver via CWM.Download the attachment below.
View attachment 1564949
imElectronica said:
Flash the stock wifi driver via CWM.
View attachment 1564949
Click to expand...
Click to collapse
Where can I get stock wifi driver??
If you are using hells fusion #50 flash dhd1.1 in attachment in cwm with system mounted
Note this driver will only work with hells fusion #50 kernel or Whitexp kernel
any other kernel flash dhd-stock or the kernels own wifi driver
custom kernels like hells fusion #50 has cwm built in - stock recovery is not required but can replace cwm with stock recovery by flashing stock kernel - if you flash the hells fusion #50 zip and follow step 1 it will flash stock kernel but as I said it's not required
shubham.bhavsar said:
Where can I get stock wifi driver??
Click to expand...
Click to collapse
http://forum.xda-developers.com/attachment.php?attachmentid=1564949
marcussmith2626 said:
If you are using hells fusion #50 flash dhd1.1 in attachment in cwm with system mounted
Note this driver will only work with hells fusion #50 kernel or Whitexp kernel
any other kernel flash dhd-stock or the kernels own wifi driver
custom kernels like hells fusion #50 has cwm built in - stock recovery is not required but can replace cwm with stock recovery by flashing stock kernel - if you flash the hells fusion #50 zip and follow step 1 it will flash stock kernel but as I said it's not required
Click to expand...
Click to collapse
Tried flashing both the files but still not working
shubham.bhavsar said:
Tried flashing both the files but still not working
Click to expand...
Click to collapse
Can you please tell me how to flash stock kernel on my phone? Also please provide download links
shubham.bhavsar said:
Can you please tell me how to flash stock kernel on my phone? Also please provide download links
Click to expand...
Click to collapse
If you flashed hells fusion #50 with the aroma installer then, you will find an option of installing stock kernel on your phone.
Go to cwm>mount system>flash the aroma installer of hells fusion #50 >then you will find 3 options, one for installing stock kernel and one for installing hells fusion kernel. choose for installing stock kernel. let the process finish and reboot the phone. thats it. you are done.
shubham.bhavsar said:
Tried flashing both the files but still not working
Click to expand...
Click to collapse
Trust me they work - you probably didn't mount system in cwm before you flashed
Dhd1.1 works on hells fusion #50
dhd-stock works on stock kernel & most other kernels
shubham.bhavsar said:
Can you please tell me how to flash stock kernel on my phone? Also please provide download links
Click to expand...
Click to collapse
Trust Him , He is Correct. He Post what exactly i want to say to you. He Just Came first in this thread . BTW .. Last week i have a problem EXACTLY like yours. I Flashed the wifi drivers from HFK's thread(hell fusion kernel) Search for it and follow the steps perfectly.
I repeat ! TRUST HIM!
Sent from my Gt-S5360 Using Facebook app!
marcussmith2626 said:
Trust me they work - you probably didn't mount system in cwm before you flashed
Dhd1.1 works on hells fusion #50
dhd-stock works on stock kernel & most other kernels
Click to expand...
Click to collapse
Thanks You SIR.......Works perfectly:good::good:
Can you tell me how to root because when I tried rooting the super user app does not appear
shubham.bhavsar said:
Thanks You SIR.......Works perfectly:good::good:
Can you tell me how to root because when I tried rooting the super user app does not appear
Click to expand...
Click to collapse
See my post and make sure you mount system in cwm before flashing
http://forum.xda-developers.com/showthread.php?t=2445944
I did it Sir....After downloadin SU app from playstore....I updated the binary but it failed to get root access what shall I do??
Sent from my GT-S5360 using xda app-developers app
shubham.bhavsar said:
I did it Sir....After downloadin SU app from playstore....I updated the binary but it failed to get root access what shall I do??
Sent from my GT-S5360 using xda app-developers app
Click to expand...
Click to collapse
This is really hijacking another thread & not keeping to thread topic which is why I gave you link to other thread
I'll just give one answer here
clear data of superuser app & try again
or
re-root using zip file
sorry.....I am new to xda....this is my first post
Sent from my GT-S5360 using xda app-developers app
successfully rooted after trying 3 times :thumbup: . Thank You
Sent from my GT-S5360 using xda app-developers app
i am having the same problem
JhellreyÜ said:
Trust Him , He is Correct. He Post what exactly i want to say to you. He Just Came first in this thread . BTW .. Last week i have a problem EXACTLY like yours. I Flashed the wifi drivers from HFK's thread(hell fusion kernel) Search for it and follow the steps perfectly.
I repeat ! TRUST HIM!
Sent from my Gt-S5360 Using Facebook app!
Click to expand...
Click to collapse
I am having the same problem...
Kernel version-2.6.35.7
[email protected][email protected]#50
Wifi n hotspot are not working and the phone boots directly to cwm instead of stock recovery and on every reboot Rs2 is being deducted...what to do???
shubham.bhavsar said:
successfully rooted after trying 3 times :thumbup: . Thank You
Sent from my GT-S5360 using xda app-developers app
Click to expand...
Click to collapse
Congrats Man !
Sent from my GT-S5360 using xda app-developers app
---------- Post added at 08:50 AM ---------- Previous post was at 08:46 AM ----------
Ravnish singh said:
I am having the same problem...
Kernel version-2.6.35.7
[email protected][email protected]#50
Wifi n hotspot are not working and the phone boots directly to cwm instead of stock recovery and on every reboot Rs2 is being deducted...what to do???
Click to expand...
Click to collapse
Same problem Buddy ? Same answer !
Try Post #4 by @marcussmith2626
and you will find the answer
Sent from my GT-S5360 using xda app-developers app
fix wi fi
shubham.bhavsar said:
I tried to root and install ROM evo-4.2 my samsung galaxy y.Firstly, I backup ed the data using clockwork mod recovery(CWM).Then I rooted my phone.After clearing data I installed Hells Fusion Kernel. I flashed the ROM,then rebooted my phone.My phone was not restarting(only "samsung galaxy y"was visible).Then I left the idea of installing ROM and restored the backup using CWM. My phone started ,but now I cannot connect to my WiFi.The WiFi network is not visible even though I am very close to it. Also, I cannot view my stock Recovery...My phone directly boots into CWM.
Please Help me to enable my phone WiFi...
Click to expand...
Click to collapse
Instruction:
1.Go to Menu
2.Go to Setting
3.Go to Wireless and Network
4.Go to Wi-Fi Setting
5.Then Press Menu Button
6.Then Select Advanced
7.Tick Static ID
8.IP Adrees is 192.168.1.253
9.Gateway is 192.168.1.1
10.Netmask is 255.255.255.0
11.DNS1 is 8.8.4.4
12.DNSI2 is 4.4.4.4 or 8.8.8.8
shadaman73 said:
Instruction:
1.Go to Menu
2.Go to Setting
3.Go to Wireless and Network
4.Go to Wi-Fi Setting
5.Then Press Menu Button
6.Then Select Advanced
7.Tick Static ID
8.IP Adrees is 192.168.1.253
9.Gateway is 192.168.1.1
10.Netmask is 255.255.255.0
11.DNS1 is 8.8.4.4
12.DNSI2 is 4.4.4.4 or 8.8.8.8
Click to expand...
Click to collapse
This is not the correct answer & I'll explain why
Different people are on different networks
99% of home users will be on a class c network so yes subnet mask will be 255.255.255.0 meaning the first 3 parts are the network & the last part the host
But my network could be on 192.168.256.1
meaning ip would be the network address 192.168.256 then a valid host
dns is assigned by isp so that will be different
Anyway that's not the answer to the op question anyway
They were simply using the wrong wifi driver for the kernel they was on
Hells fusion uses whites wifi driver
most other kernels use stock wifi driver

Categories

Resources