Related
Hi Guru's ,
Sounding verry n00bish yes but halp needed
my HTC TYTN II had no secrets anymore for me so it was time to upgrade
I read up on kernels flashing etc and then descided to get on it
got Odin , insecure kernel (CF-Root 4.0.0.2) , and a rom (was villain 3.0)
did it all correct , kernel ok , yellow triangle and original os booted up ok
CWM , clear all and reset etc , install zip , succesfully and reboot
sticks in reboot , endless yellow triangle ...
oh wel , np , i'll redo it from original
all steps ok untill other rom , bam , stuck in boot
crap , so , again
I now descided to go for the CM 7.1 that was just launched "stable"
Other CWM and kernel from their Wiki , gives me a insecure boot (triangle) to original and ok
into CWM (4.0.1.5) , all steps again , install zip from sd card , no zip (while its on for sure !)
formatted all known formats and put zip on , doesn't see it
was pissed like **** then and re-done it serveral times , no go
tried , from stock again and again to get it working
and found the intermediate problem , CWM 4.0.1.5 !
did the >CF rooot 4.0.0.2 etc and found the zip on card that 4.0.1.5 didn't never see (wtf ?)
tried CM 7.1 then , succesfully ... reboot , nope stays booting yellow triangle
tried 2 other rom's then and a nightly CM 7.1 with the CF-root also , no show
what am I doing wrong , does anyone recognise this ?
and maybe this post is better to be in Q&A I now think
Welcome to the S2 community
So, CM 7.1 sitting on yellow triangle happened to me too, be sure to:
from clockworkmod recovery:
Wipe data/cache (factory reset)
Wipe cache
advanced -> wipe dalvik cache
mount & Storage -> format system
Then flash cm 7.1 again.
If it still sit down on yellow triangle, redo all the above, yes also the flashing (for the 2nd time in a row, i know) , and usually it will finally reboot in a working CM 7.1
Let me know if this helped or not
And yes, better in Q&A
Thx for the welcome
Let me go and redo this exactly as you said right now
a3ke said:
Let me go and redo this exactly as you said right now
Click to expand...
Click to collapse
dont forget to nandroid backup your working configuration before all
Sent from my GT-I9100 using Tapatalk
rembrandtlnx said:
dont forget to nandroid backup your working configuration before all
Sent from my GT-I9100 using Tapatalk
Click to expand...
Click to collapse
I've been switching between stock rom to CM7 etc. for a while now, and it seems like I always have to flash the CM7 twice for it to work
bruflot said:
I've been switching between stock rom to CM7 etc. for a while now, and it seems like I always have to flash the CM7 twice for it to work
Click to expand...
Click to collapse
yes, As For my above instructions, seems for some reason 2x flash in a row are needed. But from when i format system, it works in a single flash
Sent from my GT-I9100 using Tapatalk
Yup, definitely need to flash the CM7 package twice in a row. My trick is to flash it once, then reboot into CWM again and flash the package again! Hope it all goes well for you.
I can happely confirm doing it all twice exactly in a row does the trick
Cm 7.1 (nightly 82) running smoothly
Can anyone confirm my idea on following :
when I start configuring contacts mailsettings etc and save then
Then do a nandroid backup (via cwm the same ???)
And I put a new rom or newer version of rom on it
If I restore , does it restore everything as a "mirror" or just the settings i made
If everything , is there a program that does what I mentioned (just the personal settings mailsettings ed ?
If you backup your ROM using CWM Nandroid recovery (booted using the volume up + home + power button combo), you will have a mirror image of everything on your phone right now. A Titanium Backup is useful if you were to transfer your user apps from one ROM to another after a full wipe; wise to do a full wipe moving from a different ROM to another.
You can restore your CWM Nandroid backup in case anything happens.
Another point I would like to add is if you are updating from an earlier version of CM7, you can just flash the upate package without any wipe. You will not loose data in the process.
Sent from my GT-I9100 using XDA App
I take no responsibility for any harm that comes to your phone as a result of applying this mod.
unofficial Clockwork Mod Recovery 5.0.2.7 for u8800pro and u8800 [upgrade to offical 2.3 GB]
Installation Instructions (upgrading - root explorer method):
Using any file explorer which is able to remount as writeable (such as root explorer), browse to the /cust_backup directory and remount it as writeable
Navigate to the image directory and backup up the current recovery by renaming it to something like recovery.bak, or _recovery.img
Rename the downloaded recovery to recovery.img and copy to the image directory.
Installation Instructions (new install):
Unplug any usb connection and turn the phone completely off
Whilst holding both the volume + and volume - keys hold the power button to turn the device on. Let go when you see a pink/purple screen.
Attach the usb cable to your computer and wait until a few usb mass storage devices are detected and mounted. Look for one that has just one directory called 'image' in it. Navigate into this directory and you'll see recovery.img etc.
(optional) Rename recovery.img to recovery_backup.img
copy the new recovery.img to image, unmount the mass storage device (safely remove in windows) and then pull the battery out to turn the phone off.
Hold volume + and power to boot to recovery.
Install any custom rom
change：
mod the kernel,Ums is worked now
use zte u880‘s charge png
can install zip from emmc and use emmc backup&restore
add ext4 fs support
about SDcard
if you can't mount SDcard in recovery,do this:
enter "advanced"--"Reboot Recovery"
then you could use the SDcard
ps:this is issue of offical GB,not recovery!
Download
http://sourceforge.net/projects/genoandroid/files/
mount sd_external error!
akalos said:
mount sd_external error!
Click to expand...
Click to collapse
have detailed info？
my worked fine
genokolar said:
have detailed info？
Click to expand...
Click to collapse
I tried to backup my rom to the external storage card,but was not possible
internal is ok
akalos said:
I tried to backup my rom to the external storage card,but was not possible
internal is ok
Click to expand...
Click to collapse
test it ,work fine for me
akalos said:
I tried to backup my rom to the external storage card,but was not possible
internal is ok
Click to expand...
Click to collapse
I have same problem!
please upload the recovery.log
Did you finally find out if there is a bug in the recovery?
Once you put the recovery, would Rom Manager detect it?
Copix said:
Once you put the recovery, would Rom Manager detect it?
Click to expand...
Click to collapse
no
10 digits
Got it. Unofficial...
Tested on u8800 and works very good. SD card sometimes can't mout properly, but i guess it's not an issue from CMW.
I've done a official GB backup, restored without a glitch, installed ICS demo without any problem too.
Can I upgrade my u8800 to official beta 2.3.5 and use this CWM to upgrade to cm7 or miui if I won't be able to use ics demo?
Sent from my u8800 using XDA App
Yes.
Sent from my ragelis
for me does not work. after several times trying to restore my miui backup (the onlyy one) it gave random errors some times, but after I was able to restore 2 times, I cant pass the miui boot.
MaRcIuPT said:
for me does not work. after several times trying to restore my miui backup (the onlyy one) it gave random errors some times, but after I was able to restore 2 times, I cant pass the miui boot.
Click to expand...
Click to collapse
Was it a backup you did with this CWM version? Or with the stockwell's CWM? The old backups don't work with this one I believe.
the backup its before this version of course. but even with this new CWM I cant flash new rom. I says error blablabla id u8800pro. I installed this because I wanted to try new ICSrom but now Im stuck to it lol
MaRcIuPT said:
the backup its before this version 4 of course. but even with this new CWM I cant flash new rom. I says error blablabla id u8800pro. I installed this because I wanted to try new ICSrom but now Im stuck to it lol
Click to expand...
Click to collapse
Have you flashed official GB before installing this recovery? I think you need to do that before this works in the original U8800.
yes I did ! the ICS works but not others.
Hmm, I tried to restore my backup from yesterday done with stockwells 5.0.2.6 recovery and my phone got ****ed up. I know I shouldn't have done this but I just had to try. xD Now I can't get past the Huawei logo, when I push the power the phone starts but just turns off after couple of seconds. I can get to bootloader (pink screen) but not to recovery. I hope no one else has tried this and I hope I get my phone working again.
Would anyone have any advice how to get my phone back up and running? Or should I just go bring it to warranty support?
have you tried to replace the recovery.img from this topic again? that happened to me too when I tried to go back with CWM v4 but then I replaced with this
Hello Every One ..
I want to install merruk kernel 2.5 on hyperion rom 7.x .
I tried my best, but got failed.
First listen to me.
Iam not a noob, I have used merruk kernel 2.5 with cod rom .
I know the whole procedure.
I am doing the same.
I want to tell 1 thing more, that is, i can't install merruk 2.0 too :/
when i flash it via CMW, it says installation done, completed etc..
but in settings it stil shows savie :S
having savie, and keeping backup, i installed merruk kernel 2.5, and then restored system, data, cache, .. all got fine :S
but nothing happend after boot logo :S
it stucked. i did my best.. nOw what to do. plz tell me !
DO NOT REBOOT after and every flashing
follow this,,
1-AT FIRST COPY THE below FILES TO SDCARD'S ROOT
2. EXTRACT boot.img FILE FROM Merruk Technology 2.0.tar To sd card Root
3. GO TO RECOVERY MODE THEN GO CMW RECOVERY
4. IN CMW CHOOSE install zip from SdCard SELECT kernel update.zip AND FLASH IT. (it will search boot.img and flashes it automatically)
3. BACKUP YOUR ROM IN CMW (after finished DO nOT REBOOT)
5. IN CMW FLASH Elite-modules.zip (DO NOT REBOOT)
6. NOW FLASH Ext4-Converter-signed.zip in CMW.(this is the merruk2.5) DO NOT REBOOT
8. In Cmw GO TO backup/restore
»Select Advance Restore
» Restore System , data & cache
Do Not Restore boot img and sd-ext. (AFTER FINISHED the 3 FILES,, DO NOT WIPE DATA AND CACHE)
9. Now Reboot system .
10. Check About Phone.
kimerika said:
DO NOT REBOOT after and every flashing
follow this,,
1-AT FIRST COPY THE below FILES TO SDCARD'S ROOT
2. EXTRACT boot.img FILE FROM Merruk Technology 2.0.tar To sd card Root
3. GO TO RECOVERY MODE THEN GO CMW RECOVERY
4. IN CMW CHOOSE install zip from SdCard SELECT kernel update.zip AND FLASH IT. (it will search boot.img and flashes it automatically)
3. BACKUP YOUR ROM IN CMW (after finished DO nOT REBOOT)
5. IN CMW FLASH Elite-modules.zip (DO NOT REBOOT)
6. NOW FLASH Ext4-Converter-signed.zip in CMW.(this is the merruk2.5) DO NOT REBOOT
8. In Cmw GO TO backup/restore
»Select Advance Restore
» Restore System , data & cache
Do Not Restore boot img and sd-ext. (AFTER FINISHED the 3 FILES,, DO NOT WIPE DATA AND CACHE)
9. Now Reboot system .
10. Check About Phone.
Click to expand...
Click to collapse
First of all thnx for helping me!
2ndly, i did the same steps on hyperion rom 7.x
( NO REBOOTS )
but still got the same boot loop, i mean I waited for 5 mins, but nothing happened.
Then i tried to install the merruk kernel of Hyperion 7 GM FINAL.
I did the same as u told, but when i was restoring the system, it gave an error.
Now Iam again flashing Hyperion 7.X and again flashing Merruk Kernel.
this i will wait for 10 - 15 mins after applying the whole procedure. Lets pray :S
WOOOOHOOOOOOO ! !!!
MAN.. I think, ur procedure was wrong..
I simple flashed hyperion rom 7.x
then made its backup.. and then installed merruk kernel 2.5 and elite modules ..
and then restored sytem data cache..
and boot succeed
THANX ALOT ...
ok...ok....ok..
i think u just right,,,one xda member flash the same way just like yours and he did succed,,
but i my case i use my steps to hyperion and ussr and i succed,,
on the second thought,, maybe MT2.0 PRE is not required to flash after all,because MT2.5 ext4 converter signed.zip has a boot.img..LOL
what do you think,,
my procedures is took by mai,,
Yeah Rite.. btw tell me 1 thing, is there any solution of this..
when iam over with my mob, and make it lock, (SCREEN OFF) , then when i press the menu button , it takes more tym to show the screen. why is that so :S and how to overcome it.. iam using cpu tuner ..
that normal,, cause mt2.5 has wakeclock issue
mastiyard said:
WOOOOHOOOOOOO ! !!!
MAN.. I think, ur procedure was wrong..
I simple flashed hyperion rom 7.x
then made its backup.. and then installed merruk kernel 2.5 and elite modules ..
and then restored sytem data cache..
and boot succeed
THANX ALOT ...
Click to expand...
Click to collapse
Even i couldnt make it work with hyperion or ussr
Correct me if im wrong
1 flash rom
2 backup
3 install mt 2.5 and elite modules without reboot
4 restore system, data, cache
Is there anything else i need to.do?
Sent from my GT-S5360 using xda app-developers app
shubhs4frndz said:
Even i couldnt make it work with hyperion or ussr
Correct me if im wrong
1 flash rom
2 backup
3 install mt 2.5 and elite modules without reboot
4 restore system, data, cache
Is there anything else i need to.do?
Sent from my GT-S5360 using xda app-developers app
Click to expand...
Click to collapse
you forgot 1, ext4 converter-signed.zip,,,that include MT2.5 which have the freq of 1.248MH..
follow my TUT above
shubhs4frndz said:
Even i couldnt make it work with hyperion or ussr
Correct me if im wrong
1 flash rom
2 backup
3 install mt 2.5 and elite modules without reboot
4 restore system, data, cache
Is there anything else i need to.do?
Sent from my GT-S5360 using xda app-developers app
Click to expand...
Click to collapse
Man if u are not succeeded with the procedure of SENIOR MEMBER. Than follow me..
flash the rom, then boot it 1 time..
than backup it..
then install elite modules, and ext4_signed.zip.
then reboot the recovery..
now restore system cache and data..
and you will be succeeded, indeeeeed .
kimerika.. tell me 1 thing man ..
now i want some customization in my STATUS BAR..
i want yellow colored battery icon and signal and wifi icon..
what the problem is, i tried status bar greper 1.8, and found some icons for signal and battery from the internet..
But due to status bar greper 1.8 , i can't change wifi icon :S
and with some patches that include status bar greper 1.8, by them, wifi icon gets hide :S i can't see it on the status bar..
leave it..
just help me in getting yellow coloured battery icon, signal icon and wifi icon :/
My own !
When i flashed Hyperion 7 GM i first go on overclocking...
So this is the procedure i did...:laugh:
1.Download PDA_merruk.tar and Ext4 converter.zip
2.Place Ext4 converter.zip in the root of your SD Card and place PDA_merruk.tar to your computer...(anywhere you like!)
3.Boot into CWM
4.Go to Backups and Storage and do a Backup
5.Go to Install zip from SD Card and choose zip from SD Card
6.Find Ext4 converter.zip
7.Flash it ! :laugh:
8.After that reboot
9.It will stuck on bootlogo so don't worry just remove the battery and insert it again..
10.Go to ODIN Mode (Volume Down,Home Key and Power Button)
11.Then press Volume up when the ODIN Mode shows up..
12.Get your USB Cable then insert it to your computer...
13.When you see the 0:[COM:XX] it means that your SGY is connected
14.Go to PDA then choose PDA_merruk.tar
15.Then press START
16.After that it will say PASS! and remove your SGY
17.You will need to remove and insert your battery again
18.Use the three button combo !
19.You will see the permanent CWM..
20.Go to Backups and Restore and Choose Advance Restore then choose the backup that day then restore system ONLY!
21.After the Restore go Wipe Data/Factory Reset
22.Wipe Cache
23.Go to Advanced then choose Wipe Dalvik Cache
24.Wide Battery Stats
25.Reboot system then you are good to go !
Works Always and NEVER fails me ! (works also on stock ROM!)
You will also get overclocked after doing this steps BTW !
Notes :
1.Must have 100% battery life
2.Must have ODIN 1.85
3.Must have Samsung Drivers
You can all get these files from Mr. Google
Required files :
Ext4 converter.zip
PDA_merruk.tar
ODIN 1.85
Samsung Drivers
Search them by USing Mr. Google.....
Sir, my Ideos X5 Was Dead after flashing emmc boot for Optimus L7 *
How can i get my phone turn to life again ? I Only have
- A Laptop with Windows 7 OS
- USB Cable for My Ideos X5 and another USB Cable with hole like my Ideos
'Story"
"My Friend need to flash CWM Recovery for his Optimus l7, He goes to my home and do a experiment with his phone. I've download the all files for flashing the CWM for his optimus L7, then i click enter (it's program like a CMD / Doomlord root kitt). But that was my bad, i have connected my phone and his phone , and i don't know it, my phone was turned to green screen bootsplash with red and blue rectangle. my rom is aurora ics(that was the greatest ics for me )but this phone turned on without a signal, no simcard detected but in SimToolkit is detected my simcard [AXIS>Registration and blablabla] when i click regist, thats no happening, no regist form. Then i do flash The Most Clean CM7 , No signal again. then i do flash a stock rom with dload in internal sdcard, alwasy update failed, and then i try to place dload folder to external sd, pull out battery and do a flash with usb and i get 'Update failed". Trying to flash it to CM10, With repartition zip file. it's successfull but i have no signal again . After i reboot my phone again, my phone goes to blue screen and i can see inside image folder are nothing inside, i place all the image folder but i can go to cwm, flashing room (oh yea !) but after click reboot phone it's always booted to cwm :'(
Anyone sir, can all of you help me how to get my phone booted to homescreen then i can use it for daily use again / like normal again ? Anyway thanks for all the devs or modder for all your great work and great science
Please i need all of your help sir
*And sorry for my bad english
VickySullivan said:
Sir, my Ideos X5 Was Dead after flashing emmc boot for Optimus L7 *
How can i get my phone turn to life again ? I Only have
- A Laptop with Windows 7 OS
- USB Cable for My Ideos X5 and another USB Cable with hole like my Ideos
'Story"
"My Friend need to flash CWM Recovery for his Optimus l7, He goes to my home and do a experiment with his phone. I've download the all files for flashing the CWM for his optimus L7, then i click enter (it's program like a CMD / Doomlord root kitt). But that was my bad, i have connected my phone and his phone , and i don't know it, my phone was turned to green screen bootsplash with red and blue rectangle. my rom is aurora ics(that was the greatest ics for me )but this phone turned on without a signal, no simcard detected but in SimToolkit is detected my simcard [AXIS>Registration and blablabla] when i click regist, thats no happening, no regist form. Then i do flash The Most Clean CM7 , No signal again. then i do flash a stock rom with dload in internal sdcard, alwasy update failed, and then i try to place dload folder to external sd, pull out battery and do a flash with usb and i get 'Update failed". Trying to flash it to CM10, With repartition zip file. it's successfull but i have no signal again . After i reboot my phone again, my phone goes to blue screen and i can see inside image folder are nothing inside, i place all the image folder but i can go to cwm, flashing room (oh yea !) but after click reboot phone it's always booted to cwm :'(
Anyone sir, can all of you help me how to get my phone booted to homescreen then i can use it for daily use again / like normal again ? Anyway thanks for all the devs or modder for all your great work and great science
Please i need all of your help sir
*And sorry for my bad english
Click to expand...
Click to collapse
do
you have the pink screen? The best way to check is to remove the battery and the External SD card. Then plug in the power USB cable, press POWER and VOLUME DOWN button together. If the pink screen comes on then i think there is a chance.
badiyee said:
do
you have the pink screen? The best way to check is to remove the battery and the External SD card. Then plug in the power USB cable, press POWER and VOLUME DOWN button together. If the pink screen comes on then i think there is a chance.
Click to expand...
Click to collapse
Yes sir, i have working pink screen, i have replaces all inside the folder image , booted to stock recovery " formatting /data, formatting /cache , rebooting" then my phone only blipping bootsplash, tried to change the recovery.img with cwm it works fine sir, but after installation ROM form ZIp my phone can't boot up , only booted onto cwm again and again, can i do something different than what i've do now sir ?
Sir, after i do experiment, my phone can booted again ! but the problem is my phone always reboot automatically, it's i need to install another rom ? :angel:
* It seems the file inside image are corrupted 9 i think ) and it seems its need an amss.mbn , bcoz before i use new amss i don't get random reboot, older amss have i used is bigger than 30mB, but after i used new amss, its only 23,5mB
VickySullivan said:
Sir, after i do experiment, my phone can booted again ! but the problem is my phone always reboot automatically, it's i need to install another rom ? :angel:
* It seems the file inside image are corrupted 9 i think ) and it seems its need an amss.mbn , bcoz before i use new amss i don't get random reboot, older amss have i used is bigger than 30mB, but after i used new amss, its only 23,5mB
Click to expand...
Click to collapse
you are not alone in this case. Even I have the same problem. I think the files from Huawei are corrupted. What I do is after installing the ORIGINAL ROM for the first time, at the FIRST BOOT, i use the program "Super One Click" to root the phone, and then install the apks so that i can quickly change the recovery.img to TCRW and then proceed to install the custom ROM of my choice.
I really suggest you go for Miui / Aurora (both are ICS) as the Jelly Bean custom ROMs are just way too buggy.
badiyee said:
you are not alone in this case. Even I have the same problem. I think the files from Huawei are corrupted. What I do is after installing the ORIGINAL ROM for the first time, at the FIRST BOOT, i use the program "Super One Click" to root the phone, and then install the apks so that i can quickly change the recovery.img to TCRW and then proceed to install the custom ROM of my choice.
I really suggest you go for Miui / Aurora (both are ICS) as the Jelly Bean custom ROMs are just way too buggy.
Click to expand...
Click to collapse
Haha, u are the Great , sir. I Have installing another rom, and then i got auto reboot, i click power off but i get reboot again (hahaha) , shutting down then rebooted again
I Think :
- The problem Internal SDCARD(EMMC) partition was bad, so the phone can't recognize what is the real internal sd card and the phone do a reboot
- And other files from image folder (like AMSS,EMCC, Or Cust or whatever) are not compatible with my base ( b526)
*i'm trying to install stock-partition.zip for re-partitioning my internal sd to the stock, but after i do flash zip files for many times are no effect was take
sir, i need a working stock partition zip file. have u partition/re-partitioning ur internal sd card sir ?>
VickySullivan said:
Haha, u are the Great , sir. I Have installing another rom, and then i got auto reboot, i click power off but i get reboot again (hahaha) , shutting down then rebooted again
I Think :
- The problem Internal SDCARD(EMMC) partition was bad, so the phone can't recognize what is the real internal sd card and the phone do a reboot
- And other files from image folder (like AMSS,EMCC, Or Cust or whatever) are not compatible with my base ( b526)
*i'm trying to install stock-partition.zip for re-partitioning my internal sd to the stock, but after i do flash zip files for many times are no effect was take
sir, i need a working stock partition zip file. have u partition/re-partitioning ur internal sd card sir ?>
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2145187&page=124
best to go here. It has both the files you need. I would recommend Forumber's partition.zip.
Go to recovery
Flash forumber's partition.zip
reboot recovery
flash forumber's partition.zip again
reboot recoery
delete the cache, system, data
reboot recovery
install custom rom
reboot into custom ROM (first boot)
WIN!
badiyee said:
http://forum.xda-developers.com/showthread.php?t=2145187&page=124
best to go here. It has both the files you need. I would recommend Forumber's partition.zip.
Go to recovery
Flash forumber's partition.zip
reboot recovery
flash forumber's partition.zip again
reboot recoery
delete the cache, system, data
reboot recovery
install custom rom
reboot into custom ROM (first boot)
WIN!
Click to expand...
Click to collapse
Ya sir i can't partition ,my internal memory apps has 1Gb, different than the partition from the link. now i'm using my last rom, CM10 0.03 by Oguzhan (That was great but wifi not works)
And my problem are come again, Auto-Reboot, while i used cwm for long it will reboot, when i do something on my phone keep reboot. trying to charging it with data,cache,system wiped, and changed all image folder rebooted again.
so,i know my problem is :
- The files inside image folder are not compatible, before i used the amss.mbn with a large size , more than 30mb(last before i deleted my amss, it has size 40mB+ )
I'm on Gingerbread Based B526, but i've deleted the amss and anything inside image, try to download the original image folder but it's from based b160 or something and it's size is 23,5mB sir can u help me which the rom based now u have used ? B526 or something ? If u on B526/B528 Sir, plzz upload all files inside image folder from based b526, maybe it will fix auto reboot my phone,
I cannot help much because i don't understand the amss.mbn
I used the b526 from Huawei and it was buggy. I don't know how to help you further from here.
badiyee said:
I cannot help much because i don't understand the amss.mbn
I used the b526 from Huawei and it was buggy. I don't know how to help you further from here.
Click to expand...
Click to collapse
*Edit. i've found the image files for the B526 sir ! better u save it for siege sir. i hope this will help you next time if ur device stucked on blue screen again
http://www.mediafire.com/download/41fw5elihq6qzli/image_35_(B526).zipNow, my devices cannot be turned on like a normal again, i've changing the amss and another files inside, but there is no effect was takes. reboot and reboot :'(
Firts i am sory for my english!
I have a ideos X5 (u8800).
i use the AURORA rom (v5u21) for many months without problem, but before 1 month my phone drop down to floor and batery pops out!
the when i open it shows me a black screen with 2 square (i think red and blue).
i pull out the battery and re-insert but the phone stuck at huawei logo!
i try to enter recovery with no luck!
i download the 2.2.2 update.app from xda and putt the dload folder on root of sd card... i start with vol + & - and the phone starts the update with oute problem! after 5 minutes my phone is online with android 2.2.2 but with 0 imei... i root and restore the imei and then i download the latest gb update from huawei (B528).
from that time my phone no boot and stuck at huawei logo, i try other official roms like B522 and B517 etc without luck...all the same result: stuck at huawei logo!
i putt again the old 2.2.2 (b138) dload on sd card and the phone starts again to android 2.2.2 but with FC's every one second. i try wipe and reinstall but nothing... i try other official roms and recoverys with no luck!
i found a thread about a full flash and i do it!
my phone after 1 hour boot up with android 2.2.2, i root and CWM and restore my imei. i use for a day to sure that work and works perfectly...
then i try to update to 2.3.5 official and i have the same thing...NO BOOT... bootloop from huawei logo!
i have access to pink screen and i install CMW recovery, i try full wipe and reboot but with no luck!!
so now if i put official 2.2.2 dload on sd my phone starts on android 2.2.2 with out problem.... but i can install any other rom!
please help!
thanks from now for any answers!
A BIG SORRY FOR MY ENGLISH
Odp
nionik said:
Firts i am sory for my english!
I have a ideos X5 (u8800).
i use the AURORA rom (v5u21) for many months without problem, but before 1 month my phone drop down to floor and batery pops out!
the when i open it shows me a black screen with 2 square (i think red and blue).
i pull out the battery and re-insert but the phone stuck at huawei logo!
i try to enter recovery with no luck!
i download the 2.2.2 update.app from xda and putt the dload folder on root of sd card... i start with vol + & - and the phone starts the update with oute problem! after 5 minutes my phone is online with android 2.2.2 but with 0 imei... i root and restore the imei and then i download the latest gb update from huawei (B528).
from that time my phone no boot and stuck at huawei logo, i try other official roms like B522 and B517 etc without luck...all the same result: stuck at huawei logo!
i putt again the old 2.2.2 (b138) dload on sd card and the phone starts again to android 2.2.2 but with FC's every one second. i try wipe and reinstall but nothing... i try other official roms and recoverys with no luck!
i found a thread about a full flash and i do it!
my phone after 1 hour boot up with android 2.2.2, i root and CWM and restore my imei. i use for a day to sure that work and works perfectly...
then i try to update to 2.3.5 official and i have the same thing...NO BOOT... bootloop from huawei logo!
i have access to pink screen and i install CMW recovery, i try full wipe and reboot but with no luck!!
so now if i put official 2.2.2 dload on sd my phone starts on android 2.2.2 with out problem.... but i can install any other rom!
please help!
thanks from now for any answers!
A BIG SORRY FOR MY ENGLISH
Click to expand...
Click to collapse
Sure u can just pick this one what says install over froyo.
good Luck
here is the list:
http://forum.xda-developers.com/showthread.php?t=2166353
here u have rom CyanogenMod 7.2
http://forum.xda-developers.com/showthread.php?t=1527745
"Get Official CWM from here.
Remove the dload folder and boot into pink screen by holding both volume keys and power on.
Replace recovery.img with the cwm recovery provided on step 5.
Boot into recovery holding up volume key and power on.
Choose select zip from sdcard and select the update-xxx.zip
Reboot! Done!"
Its ezet's rom
Wicio0 said:
Sure u can just pick this one what says install over froyo.
good Luck
here is the list:
http://forum.xda-developers.com/showthread.php?t=2166353
here u have rom CyanogenMod 7.2
http://forum.xda-developers.com/showthread.php?t=1527745
"Get Official CWM from here.
Remove the dload folder and boot into pink screen by holding both volume keys and power on.
Replace recovery.img with the cwm recovery provided on step 5.
Boot into recovery holding up volume key and power on.
Choose select zip from sdcard and select the update-xxx.zip
Reboot! Done!"
Its ezet's rom
Click to expand...
Click to collapse
i will try this!!
thanks for answer!
Wicio0 said:
Sure u can just pick this one what says install over froyo.
good Luck
here is the list:
http://forum.xda-developers.com/showthread.php?t=2166353
here u have rom CyanogenMod 7.2
http://forum.xda-developers.com/showthread.php?t=1527745
"Get Official CWM from here.
Remove the dload folder and boot into pink screen by holding both volume keys and power on.
Replace recovery.img with the cwm recovery provided on step 5.
Boot into recovery holding up volume key and power on.
Choose select zip from sdcard and select the update-xxx.zip
Reboot! Done!"
Its ezet's rom
Click to expand...
Click to collapse
so i try your method and works....my phone boot up with cyanogenMod 7...
i try aurora but the same thing, stuck at boot!!!
So i try this...
1. install b517 (with unlocked bootloader)....the phone no boot after install stuck at boot logo
2. boot in pink screen (vol up & down + pwr)
3. install recovery. (with pink screen method)
4. enter recovery and wipe all
5. install aurora zip
the phone (ohh YES) boot with aurora 5u20
but for more stable i restart to recovery wipe all and system, reinstall aurora and everything works perfect
(my flash don't work butt i belive is from the fall!
thank you very much my friend Wicio0 its your idea that make my phone work!
(how mark this thread as solved??
nionik said:
so i try your method and works....my phone boot up with cyanogenMod 7...
i try aurora but the same thing, stuck at boot!!!
So i try this...
1. install b517 (with unlocked bootloader)....the phone no boot after install stuck at boot logo
2. boot in pink screen (vol up & down + pwr)
3. install recovery. (with pink screen method)
4. enter recovery and wipe all
5. install aurora zip
the phone (ohh YES) boot with aurora 5u20
but for more stable i restart to recovery wipe all and system, reinstall aurora and everything works perfect
(my flash don't work butt i belive is from the fall!
thank you very much my friend Wicio0 its your idea that make my phone work!
(how mark this thread as solved??
Click to expand...
Click to collapse
dunno how
im using auroraSP 6.2 rlly good rom btw u need to do battery calibration
and for flash try google play streamie blue icon with gif face it needs flash to play streams so it downloads
Wicio0 said:
dunno how
im using auroraSP 6.2 rlly good rom btw u need to do battery calibration
and for flash try google play streamie blue icon with gif face it needs flash to play streams so it downloads
Click to expand...
Click to collapse
i am sorry my friend!! i dont say for flash player (but thanks for advice, very useful) i say for led flash when i take pictures!
it not turn on even with torch app! i think its broke from the fall!!!
Thanks Again for the answers!
p.s. Can you tell me how to make this thread SOLVED??? maybe some one else with the same problem find this info very useful!
Hi, edit your first post and rename thread
Btw: Try AuroraSP ROM, its much better than standart Aurora
Sorry for my bad english
Sent from my U8800 using xda app-developers app
Ax1qwer said:
Hi, edit your first post and rename thread
Btw: Try AuroraSP ROM, its much better than standart Aurora
Sorry for my bad english
Sent from my U8800 using xda app-developers app
Click to expand...
Click to collapse
Thanks!!!!
ok i try auroraSP tomorrow!
Thanks All for advices!