Related
Hi guys,
This evening something wring happened with my HD2. Suddenly without any visible reasons touch screen stopped working. Actualy screen itself is working but it doesn't react on any touches. I did hard reset - no luck, screen is working but touch surface isn't, so basically my phone is almost dead :-(
Have you seen this behaviour ? Is there any possible way to fix it ? The only thing that comes in my mind which could cause something like this is static electricity shock, but if it kills HD2 screen I want my money back.
I guess now I should use warranty and this is just after 1 month of usage....
Just a stupd question
Don't be offended by my question, I just want to rule out the obvious.
You're not wearing gloves due to the cold outside?
Greetings
chuelibrueder
No, I'm not using gloves with HD2 :-(
I have the same problem. I believe that the connectors under the screen became loose.
I have send an email to htc and they told me to contact the retailer to check if they can replace the device and if not to contact the service center in Cyprus.
There is another thread about this issue here
i`m sure that warranty will solve it.. just contact your retailer.. good luck
Hmmm,
Yet another one having to go back due to hardware problems....
WB
I loose the touch screen today and the hardware button exept Home i think, i had to remove the battery and i waited 30s put it back and everything went in place, the phone had called one contact when i had the bug.
The only thing that happened before screen doesn't work and buttons : i received an MMS strange, i'm not sure i can rely on my phone
I only installed the 1.48 rom and the 3 patches (audio, sms and sd card)
20mihalko said:
i`m sure that warranty will solve it.. just contact your retailer.. good luck
Click to expand...
Click to collapse
I contacted the service center in Cyprus and they offered to repair it but they don't have spare parts right now. I've also send an email to the retailer and wait for their answer.
Seems i have to wait after Christmas for a repair or exchange.
The good thing is that by pressing the screen with my palm or giving it a few solid taps it works for some time.
bBeware keyboard layout!
I had suffer bye used hadwritting layout sometime it cause screen doesn't responds
try change keyboard layout not hadwritting
Just had the same thing happen with mine, powers up but the screen wont respond anywhere i press. I have tried hard reset AND soft reset, nothing!
Have just restored factory ROM, and deleted hspdl and dropped off at vodaphone in town. Im gutted!!
really seems to be a production problem: i had to send my hd2 back to htc for screen replacement just 4 weeks ago... same fault as yours: the touchscreen wasn't responding to input anymore!
the last weeks i noticed that many people had this problem too...
wow.. keeping a close eye on this.. guess the same problem from the HD is creeping up to the HD2..
Well im hoping vodaphone dont turn around and say its not covered under warranty etc, I had to [like most ppl] sign up for two years to get this phone, i aint gonna be to happy if i have to spend the next 21 months of my contract without the handset i wanted!
Yikes , yesterday my screen didn't respond either (for the first time). Soft reset didn't work. After taking the battery out and leave it out for > minute it still didn't respond. I pressed the screen a little and then it worked again. Not sure if it was because of pressing the screen, but it did look that way. I hope this will be the last time this happens!
tnx!
dio62000 said:
Yikes , yesterday my screen didn't respond either (for the first time). Soft reset didn't work. After taking the battery out and leave it out for > minute it still didn't respond. I pressed the screen a little and then it worked again. Not sure if it was because of pressing the screen, but it did look that way. I hope this will be the last time this happens!
Click to expand...
Click to collapse
YESSS!!! thanx mate this worked like a charm!!
VlaJko79 said:
YESSS!!! thanx mate this worked like a charm!!
Click to expand...
Click to collapse
Well, it's been a few weeks now and I've had this problem several times again and worse, even after a hard reset; and almost each time I could fix it by pressing the screen/hardware buttons, but that shouldn't be the way, because I don't think it's good for the hardware, so I searched the forum and I think I found the two culprits (maybe a combination of the two):
1. The problem occured exactly the same day I began using my 16 GB card, class 2. It once happened that when I had the locked screen problem I took out the card and it immediately unlocked. But every now and then the phone still froze, even when I took out the SD card if the problem occured.
2. Then I have put off the automatic light adjustment settings and guess what; no more freezes!
It looks like a combination of power settings and use of SD card. I'm not very technical, but even when it looked like it was a hardware fault at first, it now seems it's a software fault after all.
Touchscreen doesnt work
Well F4CK my screen will not respond to touch at all anymore seems that this is a problem that is not well addressed tmobile is sending out a new one but the question is when will the touchscreen stop working on that "new" one.NOT happy at all.
Well this has now happened to me....no touch response but hardware buttons working, screen still displays-- off to JB HIFI as soon as I can to replace.
OOOKK I had this problem when i just flashed my phone with a costum rom. As far i remember my phone fall down once or twice but not something bad. I have the silicone cover and screen protector. If it was a hardware problem i believe that it shouldn't work at all even if you had to use the hardbuttons. Which that was how i would have to use to unlock the screen. I will go back to the factory rom and settings to see if there is any difference. My current rom is AthineOS 3.14 and Radio 2.15.50.14.
If for any reason you want to access your cellphone and you don't have time go through troubleshooting. I Suggest you download mymobiler which connects the phone and you can use it through your pc. Make sure you take the sd card before you connect. Here is the website www.mymobiler.com
In my case, my phone was RIP. The touch screen stopped working after installing a custom ROM. I installed the latest official ROM from T-Mobile and my phone and came back to life
I have just got the HD2 and been using it for a few weeks. Downloaded a few apps (eg HTC rom, BSB tweeks) and all is good. Saw Max Manila and looked like a great idea - checked my manila version 2.5.19211619.0 and downloaded 2.7 SE (checked it's right for my manila) loaded onto phone and it crashed after soft reset. Took battery out and phone doesn't go past first screen (with the red writing bottom left) - Hard reset is the same and now I'm worried!
Any ideas???
sad to say yy sounds like hard reset time.
power off, hold volume up and volume down, tap power keeping volume up and down pressed til the screen comes on and follow the prompts.
it will reset your phone to factory defaults.
never used max manila so I cant help with what the problem might be, but if there is a developers thread for it you might be better asking there.
Thanks for replying samsamuel - I've tried the hard reset and it doesn't work!
Even when I do as you say, I get the white start screen with htc written on it and then several red lines at the bottom right starting R G and D and that's it! It just stay's like that - At this moment I'd pray for a hard reset!!
I'm going to try booting from the sd card but I'm not sure I can get the phone to go into the bootable mode. I've downloaded the HTC rom and extracted the nmh so we'll see.
if your phone is provider locked then that will not work.you need the rom that came on your phone. so if was from uk o2 then you need the o2 uk rom, otherwise it wont work.
No luck! Whilst I've got everything to sort the phone out it won't do anything but load the white first screen no matter which buttons I hold down.
Man this sucks!
Guess there's nothing for it except the bin unless anyone else has any other ideas??
can you get into boot loader?
press and hold vol down(not up this time, just down) tap and release power, keep vol down held. should boot to striped cultures colored screen.
if you can what does it say next to SPL?
Hi Samsamual
Thanks for helping but no, won't go into bootloader either - doesn't respond to any input (even when I conect the usb the charge led doesn't come on!) and just starts with the white screen with the HTC logo and then the red writting appears and it just hangs - left it for 5 mins just to be sure and no change
Looks like I've really messed it up although I have no idea what I did wrong - instal went just like the other things I installed.
Ahh shame. All i can suggest is the original rom sd card method. But it MUST be the propper rom that came on your phone, so if you got it from vodaphone, , , even if it is unlocked, you must use the voda rom.
Also, have a really good read through the pages in teh rom development section. If you can find someone with the exact same issue, you could be one step closer to fixing it.
Brotherskid said:
Thanks for replying samsamuel - I've tried the hard reset and it doesn't work!
Even when I do as you say, I get the white start screen with htc written on it and then several red lines at the bottom right starting R G and D and that's it! It just stay's like that - At this moment I'd pray for a hard reset!!
I'm going to try booting from the sd card but I'm not sure I can get the phone to go into the bootable mode. I've downloaded the HTC rom and extracted the nmh so we'll see.
Click to expand...
Click to collapse
you must tab the power botton for a short time just tab it and leave it with keeping pressing on the volume up and down buttons don't leave them i think it must work with you tell me if it works
Brotherskid said:
...I'm going to try booting from the sd card b
Click to expand...
Click to collapse
When you tried the SD card method did you use a 2GB SD card and was it formatted to FAT32?
WB
Have you tried a boot (all combinations!) without the sd card installed?
Hoss and WB - thanks for the comments
Hoss, I've held the volume buttons for over a minute after powering on - no change
WB, I can't get the phone to go into boot loader screen but thanks for the info for the future. Next time I'll see if I can copy the original rom just in case.
Resigned myself to having a new paper weight on my desk and looking for a new phone - Guess I won't be putting so many programs on my new one....
PA - Thanks for the advice - Yes tried with sd card in/out sim in/out bootloader, hard reset, soft reset and always the same.
In your posts you do not mention where you bought your HD2, and I do not know what country you are in.
From what I have read, it seems that you did not flash any ROMs, nor change your SPL, so if I were you, at this point, rather than accepting a bricked paperweight, why not explore your warranty possibilities?
Contact the place you bought the HD2 (the dealer) and explore your options. Since I do not know which country you are in I will not suggest an HTC service center, but if your country has such a center, at last resort, you might check out that possibility.
Since you apparently had no hardware problems before the manila incident, it would seem that it is a software glitch somehwere.
Good luck with all of this. It must be almost heartbreaking to have this happen with such beautiful hardware.
rlydiard said:
In your posts you do not mention where you bought your HD2, and I do not know what country you are in.
From what I have read, it seems that you did not flash any ROMs, nor change your SPL, so if I were you, at this point, rather than accepting a bricked paperweight, why not explore your warranty possibilities?
Contact the place you bought the HD2 (the dealer) and explore your options. Since I do not know which country you are in I will not suggest an HTC service center, but if your country has such a center, at last resort, you might check out that possibility.
Since you apparently had no hardware problems before the manila incident, it would seem that it is a software glitch somehwere.
Good luck with all of this. It must be almost heartbreaking to have this happen with such beautiful hardware.
Click to expand...
Click to collapse
What's most annoying is it wasn't as if I was doing anything crazy! Max manila is used by many people (from what I've seen in the threads) and I guess I downloaded the wrong one (although naturally I checked and it's the right one). Certainly will curb my using of 3rd party software! As for the warranty, you're right, I can try and see if it can be fixed (bizarrely, that hadn't occured to me - I thought that with no resets working HTC couldn't do anything). Thanks for the tip and I'll let you know how I get on.
Surely your warranty will cover this. Yes, let me (and us) know how all of this goes. You will get your phone back to what you deserve, for sure!
I had the same issue.
Sent mine to HTC and got it back with the comment "Cannot reproduce"
Probably it solved itself when the battery was removed for a couple of days in the mail.
It has now been working for two weeks again.
Fingers crossed.
watnuweer said:
I had the same issue.
Sent mine to HTC and got it back with the comment "Cannot reproduce"
Probably it solved itself when the battery was removed for a couple of days in the mail.
It has now been working for two weeks again.
Fingers crossed.
Click to expand...
Click to collapse
Experential nut I may be, but just wondering if you had the problem after you installed the MAx manila? I wonder now what versions of OS may be causing this problem.
i had something like this with my HTC Diamond... It stopped responding completely when turned on, didn't respond to the usb cable being plugged in (the round ring used to illuminate when charging)
I took the battery out, for about 30 minutes... then left it charging for another 30 minutes - booted up straight away and never did anything like that again
Worth a shot just leaving it without power for awhile, and then just recharging it
Like watnuweer mentioned, "cannot reproduce" probably fixed itself by not having the battery left in for awhile
fakker said:
i had something like this with my HTC Diamond... It stopped responding completely when turned on, didn't respond to the usb cable being plugged in (the round ring used to illuminate when charging)
I took the battery out, for about 30 minutes... then left it charging for another 30 minutes - booted up straight away and never did anything like that again
Worth a shot just leaving it without power for awhile, and then just recharging it
Like watnuweer mentioned, "cannot reproduce" probably fixed itself by not having the battery left in for awhile
Click to expand...
Click to collapse
This is getting more interesting, what do you suppose is the cure of taking out the battery, and then charging? I do not doubt your experience, I am just extremely curious if anyone can explain this phenomena.
Alright, so here's my problem. My touchscreen won't response to any finger movement. I could press the hardware buttons like power, volume and talk and it response to that but my problem is mainly trying to get inside my rom. I tried flashing rom via NAND and via clockwork mod and nothing helps. The G Sensor seems to work just fine because it rotates the screen when I'm inside my ROM. I could go back into MAGLDR but I don't think anything there is going to help?
Has anyone else experience anything like this and if so, what did you do to solve it?
had same problem, found a FIX
i have had same problem past couple of days. i was running darkstones SuperRAM_FroYo_V1.5 build with oz 2 cleanex rom. i know that every now and again it would be a pain to unlock the device with the agonising wait for the lock screen to show up but this time the touch screen would not work at all not recognising any movement and not dragging the unlock button across. i would have to take the battery out and restart, even some times touch screen would fail completely when in winmo too, got to a point when 3 days of working then not working and taking the battery out a million times to boot back into android to unlock the device, then touch screen died completely.
FIX- Hard reset
will reset windows mobile. all data on device will be lost.
hold down up-vol key and down-vol key, soft reset button and then power button till it displays formatting screen. follow on screen instructions.
hope this helps.
tidygrant said:
i have had same problem past couple of days. i was running darkstones SuperRAM_FroYo_V1.5 build with oz 2 cleanex rom. i know that every now and again it would be a pain to unlock the device with the agonising wait for the lock screen to show up but this time the touch screen would not work at all not recognising any movement and not dragging the unlock button across. i would have to take the battery out and restart, even some times touch screen would fail completely when in winmo too, got to a point when 3 days of working then not working and taking the battery out a million times to boot back into android to unlock the device, then touch screen died completely.
FIX- Hard reset
will reset windows mobile. all data on device will be lost.
hold down up-vol key and down-vol key, soft reset button and then power button till it displays formatting screen. follow on screen instructions.
hope this helps.
Click to expand...
Click to collapse
well i have woke up this morning to be able to unlock my device to then locking it and not being able to unlock it again!!! i had notification to say it had managed to restore 16 apps whilst i had been asleep so i am thinking there is a dodgy app out there some were
mazdarider23 said:
Alright, so here's my problem. My touchscreen won't response to any finger movement. I could press the hardware buttons like power, volume and talk and it response to that but my problem is mainly trying to get inside my rom. I tried flashing rom via NAND and via clockwork mod and nothing helps. The G Sensor seems to work just fine because it rotates the screen when I'm inside my ROM. I could go back into MAGLDR but I don't think anything there is going to help?
Has anyone else experience anything like this and if so, what did you do to solve it?
Click to expand...
Click to collapse
Sent from my PC36100 using XDA Premium App
I have this problem and have found no way to fix it, I have tried everything except possibly going to the clk loader instead of magldr. when i put the phone to sleep with the power button is when i have the issue of not being able to unlock my phone in Android. I have tried task 29, going back to original windows roms, sd and nandroid, it is a hardware issue related to the digitizer as far as I'm concerned. I love my HD2 and really need to fix or find another one. I know this doesn't help, but maybe a little more insite if nothing else
I had the same issue. With my 1st HD2 it started as an intermittent problem, then eventually completely stopped working. With my replacement it just started to happen again. I immediately flashed back to stock tmo windows and the touchscreen would work so long as I did not try and put the phone on standby or wake the phone using the end key. If the phone went to standby on its own, the touchscreen would not work either. I changed the settings so that the phone would not go into standby at all. I then learned that locking the phone from the windows menu and allowing it to go to standby that way somehow averted the touchscreen problem. After 2 days, the problem seemed to resolve itself, almost completely. If I try and wake it using the end key, the touchscreen still wont work, but every other button on wake works. Also, putting it in standby with the end key seemed to not cause the problem any longer.
I dont know if the issue varies per person, but what worked for me was going to stock windows for a couple of days, then starting over with android. I guess it depends on how far along the problem has progressed.
Look at my thread in my Sig about the Unresponsive Screen Solved. This sounds exactly as that. And there are various workaround solutions through out the post.
I have been using Ultimate Droid 3.2.5 for a couple of months now and a few days ago i pick up my phone to make a call and the screen doesn't respond when I touch the screen. Only the bottom buttons and volume buttons work. At first, if i I play with the buttons at the bottom i can usually get the touch screen to repond. I tried to wipe data/dactory reset and reinstall rom but now I cant even get it to work like before. Only thing I can do now is answer calls and call back the last person that called me. Has anyone else had this problem?PLEASE HELP!!! Thanks!
Did you eventually find out what cause this issues?
I think my phone is behaving similar, I'm using different Android ROMS for quite a while now, and suddenly without any apparent reason the touchscreen isn't responding very often after waking up the screen. It won't happen if the screen is on and the touch screen is working, only after a wakeup..
Sometimes it's just impossible to get it working again, and I'm forced to wait a while until it decides to respond again. It kinda feels like the phone is forgetting to wake or initialize the touchscreen properly.
ROM and Kernel changes didn't solve this so far.
I think the issues originally started with Typhoons CM7 NIGHTLY 3.7.1 / tytung 12.4v3 for me.
Actually I never found out what the problem was. I just flashed it back to stock and had T-Mobile send me another one. That was in May and actually a few days ago it happened to my phone again. So this time they sent me an HD7. It really sicks that they dont have that phone anymore. Cant do sh*t with this HD7!
Same here the Power Button is the problem, you just have to train yourself not to use it. I use Button Savior and Button Remapper. On my second HD2, luckily T-Mobile sent me a HD2, but that was in like March, right before my one year was up.
Make sure you keep this one working cuz there will be no more HD2! I may find one on Craigslist or something. This HD7 and Windows 7.5 really sucks monkey nuts!!!
tcole said:
Make sure you keep this one working cuz there will be no more HD2! I may find one on Craigslist or something. This HD7 and Windows 7.5 really sucks monkey nuts!!!
Click to expand...
Click to collapse
Yea I played around with WP7 on the HD2 when it first became avaliable and wasn't really worth the time and trouble it took to get it on there. One month later I went back to NAND and haven't looked back.
Same here! Registering Zune was a problem at first.
Thanks for your quick response! Yeah, seems to be a problem with the end button / flex connector of digitizer
I found another helpful thread about this issue: The Infamous Unresponsive Digitizier Screen Possibly Solved!
Obviously you need to replace the digitizer to fix this problem.
I'm sticking to the solution of not touching the button at all, there are apps to turn off the screen and shutdown the phone. At least waking with any other buttons works most of the time for now, but it's not really a long-term solution.
Wish I would have saw that thread b4 i sent my phone back!!!
I tried soft reset, nothing. Pull'd out battery reboot, nothing. Can you guys recommend me with a few steps i should take ?
Thanks a lot i really need my hd2 this week
Task 29, flash winmo stock, check if touchscreen if working. If it is, flash HSPL 2.08, flash radio, MAGLDR, then android, check if it is working, if it isn't then try a different rom. If from winmo it isn't working, then more than likely it is a hardware problem, eg. your end key is interrupting touch inputs, so take it into repair, although currently HTC is facing repair problems so if you're willing to wait say a month or so, then sure, but if it were me, i'd just buy a new phone.
Mann....i now feel that Android NAND is what gives users so many touch screen problems....yikesss !!!!
Im trying taks 29 now.
I installed this WinMo rom after task 29 and a hard reset:
Energy™-.¸¸.·´¯ 6.5|21916 / 6.5.X|29020 * Sense 2021
Still no touch screen. But the hardware keys are working. Will this be the end for me of a fantastic device and ****ing up 190 euro's
worst situation ever! when you slice your finger to unlock it and nothing happends !! it's a very common problem, HARDWARE related, not android nand related, i've been in the same situation after installing an app, somehow the screen became unresponsive.
i read somewhere that if you pressed a little hard above and arround the power button, the touchscreen starts to work again, because the digitalizer´s conectors are arround there, and i tried that and guess what?? it worked! after that installed button saviour app and never pressed the power button again.
but sadly, after a while the screen becomes unresposive again, so it´s just a temporal solution, now my touchscreen has become completly unresponsive and that trick doesn´t work any more
sounds like the digitizer issue thats been banded about on here
by the way, there are thousands of threats in the forum regarding the same problem, try to give them a read
huevo0000 said:
by the way, there are thousands of threats in the forum regarding the same problem, try to give them a read
Click to expand...
Click to collapse
I did read some, didn't gave me a single working solution. Is this a common problem with HD2's ?
My warranty is gone. Should i try to take it to a local repair shop ? Or take out my baseball bat and give it a good swing ?
It wasn't really supposed to happen you see. Android just requires us to use a lot of buttons and well, the hardware design wasn't meant for the buttons to be pressed a lot, so this happens, if you're unlucky.
Didn't use the power button that much really. Im thinking about selling my hd2 and buying a palm pixi to use for a couple of months. How much should i charge ? 60 bucks ?