Can someone please explain to me how to flash cm7 on my D2? I put it back on the stock rom and tried flashing it, didn't work. How to I put back the stock kernel?
what do you mean, put it back on stock rom?
what version of cm7?
where did you get it? link please
what system version is on phone?
are you rooted?
you may need to be on froyo 2.2, depends on what version you are flashing
should be like this
Download the latest version of CyanogenMod.
Optional: Download the Google Apps for the device.
Place the CyanogenMod update.zip file on the root of the SD card.
Optional: Place the Google Apps .zip on the root of the SD card also.
Boot into the ClockworkMod Recovery.
Once the device boots into the ClockworkMod Recovery, use the side volume buttons to move around, and either the power button or the trackball to select.
Optional: Select backup and restore to create a backup of current installation on the Motorola Droid 2.
Select the option to Wipe data/factory reset.
Then select the option to Wipe cache partition.
Select Install zip from sdcard.
Select Choose zip from sdcard.
Select the CyanogenMod update.zip.
Optional: Install the Google Apps by performing steps 7 - 9 again and choosing the Google Apps update.zip.
Once the installation has finished, select +++++Go Back+++++ to get back to the main menu, and select the Reboot system now option. The Motorola Droid 2 should now boot into CyanogenMod.
Click to expand...
Click to collapse
Yes i am rooted
I was on the latest OTA .621 (2.3.4)
I first flashed MIUI then I wanted to flash CM 7.2.0 but it told me to check my kernel.
I downloaded it directly from download.cyanogenmod.com
I am currently on MIUI V4 2.7.6
because of the locked bootloader, you still are on .621, or at least the kernel
I think cm 7 is based on the D2 froyo 2.2 kernel, so you have no way to flash it sucessfully
try a different rom
I'm using Huawei X5 U8800 running Oxygen 2.3.7
I'd downloaded the Aurora 4.1.zip and place in sd card.
After I enter CWM and choose install zip from sd, I can't see the zip files.
Any solution please?
Thanks!
yongyong0718 said:
I'm using Huawei X5 U8800 running Oxygen 2.3.7
I'd downloaded the Aurora 4.1.zip and place in sd card.
After I enter CWM and choose install zip from sd, I can't see the zip files.
Any solution please?
Thanks!
Click to expand...
Click to collapse
Have you upgraded to official gingerbread first?
yongyong0718 said:
I'm using Huawei X5 U8800 running Oxygen 2.3.7
I'd downloaded the Aurora 4.1.zip and place in sd card.
After I enter CWM and choose install zip from sd, I can't see the zip files.
Any solution please?
Thanks!
Click to expand...
Click to collapse
Please follow the instructions, dont do it on own your way.
1) Update to original 2.3.5 (518+)
2) root it
3) if needed unlock your bootloader
4) use 5.+ cwm (check aurora thread first)
5) flash aurora
Sent from my U8800
upgrade to 2.3 and install cwm 5.5.0.4
Hello,
I own a defy mb525 with CM7.2.0. I am not so happy with this version (bad 3g access; battery life very short)
So I decided to install the CM10.1.
On the develloper page I saw that the status has been updated on the 26.03. But if I look for my model (mb525), I can find only a version dated on the 120904.
Is there a newer version for the mb525 or is it only for the mb520 and mb526 ?
Regards
http://forum.xda-developers.com/showpost.php?p=34616788&postcount=1
--> FAQ2
It should work for both. Same as latest builds of CM10.
thubi said:
http://forum.xda-developers.com/showpost.php?p=34616788&postcount=1
--> FAQ2
It should work for both. Same as latest builds of CM10.
Click to expand...
Click to collapse
Sorry I was meaning the 4.1.2 so it should be the 10.0
Cid156 said:
Hello,
I own a defy mb525 with CM7.2.0. I am not so happy with this version (bad 3g access; battery life very short)
So I decided to install the CM10.1.
On the develloper page I saw that the status has been updated on the 26.03. But if I look for my model (mb525), I can find only a version dated on the 120904.
Is there a newer version for the mb525 or is it only for the mb520 and mb526 ?
Regards
Click to expand...
Click to collapse
2ndboot builds: they are one build for both mb525 &5 26 .... so you can download the 26.03 nightly build and update on your MB525 :good:
Cid156 said:
Hello,
I own a defy mb525 with CM7.2.0. I am not so happy with this version (bad 3g access; battery life very short)
So I decided to install the CM10.1.
On the develloper page I saw that the status has been updated on the 26.03. But if I look for my model (mb525), I can find only a version dated on the 120904.
Is there a newer version for the mb525 or is it only for the mb520 and mb526 ?
Regards
Click to expand...
Click to collapse
Yes, there is CM10 from Quarx. Your device can be either mb525 or mb526 with red lens or green lens. CM10.1 from the same person also can.
hi
I have a similar question I have MotoDefy 525 running 2.3.7 I want to install ([ROM][JB+][4.3.1] MokeeOS 43.1 Defy/Defy(+) Official) http://forum.xda-developers.com/showthread.php?t=2453395
but it needs TWRP I tried installing on my 2.3.7 but it dosent install I looked around the forms I read that I have to up date my android version.
being a newbi im a little worried about bricking
A little help
can some one give the steps in Newbi language on how to update my phone to MokeeOS 43.1 please.:fingers-crossed:
Super_Moto said:
hi
I have a similar question I have MotoDefy 525 running 2.3.7 I want to install ([ROM][JB+][4.3.1] MokeeOS 43.1 Defy/Defy(+) Official) http://forum.xda-developers.com/showthread.php?t=2453395
but it needs TWRP I tried installing on my 2.3.7 but it dosent install I looked around the forms I read that I have to up date my android version.
being a newbi im a little worried about bricking
A little help
can some one give the steps in Newbi language on how to update my phone to MokeeOS 43.1 please.:fingers-crossed:
Click to expand...
Click to collapse
First of all, none of you guys ever read the stickies. It is packed with good info.
Our phone has a locked bootloader, it is almost impossible to brick.
Download latest CM10 and then install.
Ive come across a newbi problem im on the link of the latest cm10 (http://forum.xda-developers.com/showthread.php?t=1768702) and the file I try to flash wont install it gets aborted, I searched the forms for other cm10 and same issue file gets aborted.
If possible to be directed to the file I need to flash to cm10
not easy being newbi these days :crying:
Motorola 525 green lens running 2.3.7
What error do you get?
Sent from my MB526 using Tapatalk
hotdog125 said:
What error do you get?
Sent from my MB526 using Tapatalk
Click to expand...
Click to collapse
the error shows when I try to flash the .zip file _Install zip from sdcard_choose zip from sdcard I pic the file and it doesn't install it says aborted show me the yellow triangle symbol I was assuming im flashing the wrong file.
before I do an install I wipe data/factory reset and wipe cache partition
Super_Moto said:
the error shows when I try to flash the .zip file _Install zip from sdcard_choose zip from sdcard I pic the file and it doesn't install it says aborted show me the yellow triangle symbol I was assuming im flashing the wrong file.
before I do an install I wipe data/factory reset and wipe cache partition
Click to expand...
Click to collapse
You are trying to flash through stock recovery. Install through custom recovery.
hotdog125 said:
You are trying to flash through stock recovery. Install through custom recovery.
Click to expand...
Click to collapse
I tried that and im also giving me (installation aborted) I used file cm-10-20130918-NIGHTLY-mb526 but no luck
Super_Moto said:
I tried that and im also giving me (installation aborted) I used file cm-10-20130918-NIGHTLY-mb526 but no luck
Click to expand...
Click to collapse
The file is ok, i've installed it on my defy
MikBre said:
The file is ok, i've installed it on my defy
Click to expand...
Click to collapse
Im clue less what im doing wrong I looked on u tube on installing jelly bean im following the same steps but Im getting (file aborted) when I try flashing the file
what r the steps u take on installing the file ?
At first I tried: Reboot in _Recovery _Install zip from sdcard_choose zip from sdcard_pick the the file _yes install
it starts by saying
Finding update package...
Opening update package...
E:Can't open /sdcard/cm-10-20130918-NIGHTLY-mb526.zip
(bad)
Installation aborted.
2nd I tried
Reboot in Bootmenu
Recovery _ Custom Recovery etc ..etc ..
and get the same message
Finding update package...
Opening update package...
E:Can't open /sdcard/cm-10-20130918-NIGHTLY-mb526.zip
(bad)
Installation aborted.
always did the factory rest and wiping during both process
Super_Moto said:
Finding update package...
Opening update package...
E:Can't open /sdcard/cm-10-20130918-NIGHTLY-mb526.zip
(bad)
Installation aborted.
Click to expand...
Click to collapse
just to be sure, your phone is not connected to a computer when you did the flash, right?
jh20 said:
just to be sure, your phone is not connected to a computer when you did the flash, right?
Click to expand...
Click to collapse
yes phone is disconnected from computer,I had no issues installing cm7
My is CMRecovery v5.0.3.2-jordan
and Bootmenu <v1.1.1> could these be the problem some thing needs to be updated ?
Super_Moto said:
what r the steps u take on installing the file ?
Click to expand...
Click to collapse
If you want a video guide look at the Youtube channel of locslikes.
Therre is a guide call "MOTOROLA DEFY How To Install ClockWorkMod and Cyanogenmod 10 Jelly Bean Android"
MikBre said:
If you want a video guide look at the Youtube channel of locslikes.
Therre is a guide call "MOTOROLA DEFY How To Install ClockWorkMod and Cyanogenmod 10 Jelly Bean Android"
Click to expand...
Click to collapse
Im just guessing.... that my bootmenu seems to be out of date possible being the reason that jellybean wont install,
bootmenu is up to 2ndInit Recovery v2.3 can this file be installed over v1.1.1 ?
Super_Moto said:
Im just guessing.... that my bootmenu seems to be out of date possible being the reason that jellybean wont install,
bootmenu is up to 2ndInit Recovery v2.3 can this file be installed over v1.1.1 ?
Click to expand...
Click to collapse
out of curiousity, i restored my mb525 back to cm7 nightly 20111201 nandroid, which has cwm v5.0.3.2. i did not check the bootmenu version but it should be the same as yours. then, after formatting system/cache partitions, i flashed cm-10-20130918-nightly-mb526.zip, and it worked.
so i don't really know what's wrong with your phone, but i have a couple of suggestions for you to try. not that there's any logical explanations but try it anyway:
1. according to the error messages, you have the cm10 rom in the root folder of the sdcard. try creating a sub-folder called cm10 and copy the cm10 rom and the minimal gapps into it.
2. download the defy_fullwipe_ext4.zip and defy_fullwipe_ext3.zip ( for later use, when you want to revert back your rom) from here and put them in cm10 folder as well:
http://forum.xda-developers.com/showthread.php?t=1818520
3. reboot into recovery but don't do any format or wipe. instead flash the file defy_fullwipe_ext4.zip and this will format your partitions into the ext4 file system.
4. then flash the cm10 rom. if it installs sucessfully, then without any further wiping,nor flashing the minimal gapps, reboot the phone. (note that the os will reboot once more in the middle of booting up, seemingly having a bootloop problem. don't worry it's meant to do that, unless it rebooted more than once)
5. if it boots up sucessfully, do some basic set up first before rebooting back into recovery to flash the minimal gapps.
alternatively you could try flashing cm9.1 (ext3) to get a newer bootmenu and cwm versions before flashing cm10. no need to flash any gapps, just wipe system/cache partitions and flash the cm9.1 rom by itself. reboot into cm9.1, do basic set up. once it's ready reboot into recovery and do the above steps, starting from step 3, to flash cm10.
good luck.....
edit: did you get your cm10 rom from here:
http://quarx2k.ru/cm10-2ndboot-nightly-defy(+)/
jh20 said:
out of curiousity, i restored my mb525 back to cm7 nightly 20111201 nandroid, which has cwm v5.0.3.2. i did not check the bootmenu version but it should be the same as yours. then, after formatting system/cache partitions, i flashed cm-10-20130918-nightly-mb526.zip, and it worked.
so i don't really know what's wrong with your phone, but i have a couple of suggestions for you to try. not that there's any logical explanations but try it anyway:
1. according to the error messages, you have the cm10 rom in the root folder of the sdcard. try creating a sub-folder called cm10 and copy the cm10 rom and the minimal gapps into it.
2. download the defy_fullwipe_ext4.zip and defy_fullwipe_ext3.zip ( for later use, when you want to revert back your rom) from here and put them in cm10 folder as well:
http://forum.xda-developers.com/showthread.php?t=1818520
3. reboot into recovery but don't do any format or wipe. instead flash the file defy_fullwipe_ext4.zip and this will format your partitions into the ext4 file system.
4. then flash the cm10 rom. if it installs sucessfully, then without any further wiping,nor flashing the minimal gapps, reboot the phone. (note that the os will reboot once more in the middle of booting up, seemingly having a bootloop problem. don't worry it's meant to do that, unless it rebooted more than once)
5. if it boots up sucessfully, do some basic set up first before rebooting back into recovery to flash the minimal gapps.
alternatively you could try flashing cm9.1 (ext3) to get a newer bootmenu and cwm versions before flashing cm10. no need to flash any gapps, just wipe system/cache partitions and flash the cm9.1 rom by itself. reboot into cm9.1, do basic set up. once it's ready reboot into recovery and do the above steps, starting from step 3, to flash cm10.
good luck.....
edit: did you get your cm10 rom from here:
http://quarx2k.ru/cm10-2ndboot-nightly-defy(+)/
Click to expand...
Click to collapse
I did try using that link but the files still would abort when flashing, also tried http://d-h.st/users/Quarx files it did the same thing
I followed your instruction but decided to goto cm 9 first I flashed the (ext3) file it installed and cm9.1 installed also installed twrp with no issues but when I was going through cm9 and its functions I couldent go on line a popup message (Unfortunately, brower has stopped) also I wasn't able to log on google play a pop up message (Unfortunately,com. google android.gb has stopped). so I got fed up and decided to goto cm10.1 so I first flashed with ext4.zip it installed and then tried to flash 10.1 file once again the file wouldn't install it gave me aborted file message again. I had no choice to reboot and I had to reinstall the factory file(brick). I am now back to where I started :silly: cm7 2.3.7 its been a hell of a weekend ........... ill give it another shot soon :fingers-crossed:
I have have a nexus 5 running Paranoid Android 4.4 with franco kernal and CWM recovery. Every time I try to use Paranoid OTA to update to 4.41 I get to the CWM recovery and am presented with this:
+Verifying SD card marker.....
+SD card marker not found........
+Error processing ROM manager script. Please verify that you are performing the backup, restore, or ROM installation from ROM Manager v.4.0.0 or higher
+/tmp/recovery.log was copied to /sd card/clockworkmod/recovery.log. Please open ROM Manager to report the issue.
What the heck is ROM manager.
I also looked around and saw that re rooting my device could fix the problem but is there a way to do that without loosing all the work I put into customizing my phone.
Simple.
OTA has never supported CWM because of the closed source scripting in CWM. You need philz or twrp in order to use the ota. If you want to keep using CWM you will have to manually flash after the ota has downloaded the update.
#stayparanoid