Related
got an aussie galaxy s??? come here and ill anwser your questions
TheKoomba2010 said:
got an aussie galaxy s??? come here and ill anwser your questions
Click to expand...
Click to collapse
When will 2.2.1 be released in Australia?
Too hard to answer... ha ha ha
Prob before the US
So easy to do it yourself anyway.
Install CWM with Odin, then go to Docs kitchen and install the non-wipe version.
Bonus it shall work and is no dodgy Kies involved plus you get a real kernel, Speedmod etc and can convert the entire file system to ext4 aswell... Worth it just for the huge speed increase etc from stock..
Sent from my GT-I9000 using XDA App
it will be realeased in mid 2011 but in not going to tell u the real realease but i will be telling later on in the year
whats the difference between the Australian models and the Europe models? Cause I've istalled a Europe firmware and then Darkyy's ROM, works fine.
well it usually depends on what carrier your on. for example if your on optus u might get an australian open app. or if your on sprint you might get a wi fi hotspot option in the settings. the possibilities are endless... ill keep u updated on these changes
Nice to have an Ozzy thread. been in the dark for to long!Lol
I wont to flash the new xwjs3 with pit 803 using our CSC!
prana_Sky said:
Nice to have an Ozzy thread. been in the dark for to long!Lol
I wont to flash the new xwjs3 with pit 803 using our CSC!
Click to expand...
Click to collapse
yes i agree....
actually it appears that both of us are working on the same thing!!!! ill pm u as sson as possible when i figue it out
prana_Sky said:
Nice to have an Ozzy thread. been in the dark for to long!Lol
I wont to flash the new xwjs3 with pit 803 using our CSC!
Click to expand...
Click to collapse
yes i agree!!! us aussies need to stand up!!!
anyway about your question........
try this thread: http://forum.xda-developers.com/showthread.php?p=9745489
if that didnt help.....
pm me.....
TheKoomba2010 said:
yes i agree!!! us aussies need to stand up!!!
anyway about your question........
try this thread: http://forum.xda-developers.com/showthread.php?p=9745489
if that didnt help.....
pm me.....
Click to expand...
Click to collapse
Looks like while you were looking there I was looking here http://romkitchen.org/sgs/?s=generator
downloaded the file but don't know what to do with it .it's saying I need clockworkmod recovery to install feel lazy to do the prosess. I thought it would have been a odin flash and thats it.
Still might just go for the original xwjs3 flash unless someone know an odin flash way for romkitchen?
Why is pup still captaining the one day team, let alone even in the side and why hasn't hilditch been booted as a selector when he couldn't pick his nose properly with a torch and pair of needle nose pliers let alone pick a cricket team?
Tapatalk! We don't need no stinkin' Tapatalk!
Ok! Flashed xwjs3 with xwjpy modem and jp4 csc. works a treat!!
congrats
prana_Sky said:
Looks like while you were looking there I was looking here http://romkitchen.org/sgs/?s=generator
downloaded the file but don't know what to do with it .it's saying I need clockworkmod recovery to install feel lazy to do the prosess. I thought it would have been a odin flash and thats it.
Still might just go for the original xwjs3 flash unless someone know an odin flash way for romkitchen?
Click to expand...
Click to collapse
Cwm files are flashed from the phone. Just put the file on your sd card. Then download rom manager from the market and from it flash cwm recovery. Then boot into recovery mode. Might need to boot into recovery a second time for the cwm recovery version to show. Note that this only works if you have recovery mode 2e. You can tell which version you have when in recovery mode....it shows it on top. If you have 3e just flash cf root with odin. After all is working you can select the rom on your sd card from cwm recovery and flash it. I always download roms from my phone and flash with it as well. Haven't had to use a pc or odin fir months now. I'm currently on Doc's rom JPY but who knows about tomorrow
Sent from my GT-I9000 using XDA App
sxi200 said:
Cwm files are flashed from the phone. Just put the file on your sd card. Then download rom manager from the market and from it flash cwm recovery. Then boot into recovery mode. Might need to boot into recovery a second time for the cwm recovery version to show. Note that this only works if you have recovery mode 2e. You can tell which version you have when in recovery mode....it shows it on top. If you have 3e just flash cf root with odin. After all is working you can select the rom on your sd card from cwm recovery and flash it. I always download roms from my phone and flash with it as well. Haven't had to use a pc or odin fir months now. I'm currently on Doc's rom JPY but who knows about tomorrow
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
Does cf root work with xwjs3? I have zip file, do I unzip or leave it ziped when putting on SD?? Does the file need a name??? might give it a go!
So first
1.flash cf root
2.put ziped file on sd card (asuming)
3.install clockworkmod
4.flash clockworkmod recovery, boot into recovery.
Once in recovery what do I do in recovery?
5.select rom and flash
cheers!
Really need to know which is the best modem and CSC for us Aussies. I'm on an Optus reseller here up in Brisbane and get pretty shocking reception most of the time.
wow..i didn't noe dat we hv an Aussie Thread Here..its Cool..Niwae Juz Wanna Share Wif Ya Dat I've Upgrade Mine Using Darky's Rom 2.2.1..but it seems like its sucking up my batt..& wen I run up the Quadrant benchmark,my device end up in either 3rd or 4th..unlike the others on 2.2.1 ending theirs up on the top..Juz Nt sure wer it when Wrong..But Overall Its Still cool..
prana_Sky said:
Does cf root work with xwjs3? I have zip file, do I unzip or leave it ziped when putting on SD?? Does the file need a name??? might give it a go!
So first
1.flash cf root
2.put ziped file on sd card (asuming)
3.install clockworkmod
4.flash clockworkmod recovery, boot into recovery.
Once in recovery what do I do in recovery?
5.select rom and flash
cheers!
Click to expand...
Click to collapse
You've pretty much got it. But in number 3. it's actually install 'rom manager' However not sure if cf root works on js3. I'm currently using jpy but it may work. It's just a kernal so if it doesn't just flash another compatible kernal. You will know if it works by using the 3 button method to enter recovery. If you see 2e at the top then all good.
For the zipped file you don't need to unzip. Just leave it as is. CWM recovery has an added option which allows you to select zip file from sd. you to select zip file you want to flash and you don't need to change the name. My files are names darkys...., docs... etc. You can rename them if you want.
When you flash cwm recovery from rom manager it creates an update.zip file on your sd card which normal 2e recovery uses to get you onto the cwm recovery version. And then yes, just select rom, theme, or anything else you want and all done. I currently have a folder on sd named 'flash' with subfolders for firmwares, kernals, themes, apps and other.
I just flash away anytime anywhere I like and if I'm not happy I just flash back. CWM also has a backup function which is literally a life saver. Titanium is good for apps but rom manager / cwm backs up everything. I've had problems before and from cwm recovery selected restore and all good again.
For anyone with a Telstra SGS i suggest having a look at this ROM http://forum.xda-developers.com/showthread.php?t=907149.
Been using it for about 2 weeks now and seems to give reasonable battery life compaired to stock Telstra ROM.
Can somebody explain to me why is Wi-Fi connection so unreliable? I've recently upgraded to 2.2. release, which made the Wi-Fi connectivity worse. It got that bad that I can't connect to the Wi-Fi network in my office, but my other phone (iPhone 4) deosn't have any issues connecting. Samsung has spent too much developing their 3d TV's instead improving their mobile phones quality.
Here's what I did to get JVH (with 850mhz band) and CSC for Canada on my phone. It worked for me at least
Files:
SpeedmodK15E_withLoaders.tar.md5 (8.38 MB)
http://www.multiupload.com/SRVH1BTK8R
JVH_KC1_BMC.zip (169.32 MB)
http://www.multiupload.com/1FHETKJOWA
StockJVH_Kernal_noLoaders.tar.md5 (5.47 MB)
http://www.multiupload.com/PM3AXR7JFG
**************Disclaimer:***************
I'm not responsible if this bricks your phone, as "the boss" said if I break mine, she'll break me... or I get a $20 replacement phone
Backup your /efs folder, backup EVERYTHING, just in case... I'm paranoid so I did it all
ROM NOTES:
Got deodexed from here:
http://forum.xda-developers.com/showpost.php?p=11256520&postcount=1
Modem:
KC1
Busybox:
1.18.4
Hosts file updated for ad blocking using:
http://winhelp2002.mvps.org/hosts.htm
Here's the steps I followed:
Save all files to folder/desktop
Connect phone via usb and copy JVH_KC1_BMC.zip to root of sdcard
Restart phone in download mode
Open Odin and click PDA
Select Speedmod tar file
Uncheck Auto-Reboot
Check F.Reset Time (I don't know what it does, but it's always checked)
Flash the tar.
Once complete and the box says "PASS" in green, unplug your phone and pull the battery (I was told it's safe, as it's in the MIUI instructions as well)
Put battery back in and start phone in recovery with VOL UP+HOME+POWER
In recovery choose to update from zip
Choose file from sdcard
Choose the JVH_KC1_BMC zip file and update
The phone will restart/install.
Once it's started up for the first time I recommend restarting in download mode and flashing the stock JVH kernal
You can also use any kernal you want.
Let me know if I can help at all. I was trying to make a completely odin flashable tar for this but failed miserably :9
I'll do my best to answer any questions however this is my first time making something to flash for you all
Note:
I'm not sure where to put this, sorry to mods/admins if it's in the wrong spot, please let me know
Hi,
I saw your thread, and I found it very interesting for people who own a Bell SGS 9000m Vibrant and wanna upgrate to Gingerbread.
So I decided to flash the Gingerbread JVH ROM just like you did, but I need to know a few things:
1. Will I be able to downgrade to my original stock froyo after this flash ?
2. Will I be able to update via Kies in case Bell release an official gingerbread update ?
3. Right now my phone is SIMUnlocked, will I lose my SIMunlockation after the flash ?
4. And is my actual configuration right to excecute this flash or should I flash something else before ?
My configuration is the following:
Baseband version
I9000UGJL2
Firmware
2.2
Kernel
2.6.32.9
[email protected] #3
Build number
FROYO.UGJL2
galaxy s vibrant bell
gt-i9000m
Thanks for your hard work, I hope to read back from you soon.
I have exact same configuration and exact same questions as poster above!!!
Still no answer... Guess we'll have to try if wanna know...
nguetto said:
Hi,
I saw your thread, and I found it very interesting for people who own a Bell SGS 9000m Vibrant and wanna upgrate to Gingerbread.
So I decided to flash the Gingerbread JVH ROM just like you did, but I need to know a few things:
1. Will I be able to downgrade to my original stock froyo after this flash ?
2. Will I be able to update via Kies in case Bell release an official gingerbread update ?
3. Right now my phone is SIMUnlocked, will I lose my SIMunlockation after the flash ?
4. And is my actual configuration right to excecute this flash or should I flash something else before ?
Click to expand...
Click to collapse
1. yes, it's possible
2. yes, but you would either need to downgrade first or do a kies hack
3. no
4. you can do it straight
Thanks zorxd.
I am going to try. So there is no need for me to select any Pit file or did the guy forget to mention it ? Also can we tick the repartition option in Odin?
Sorry if I ask usekess question I am used to flash android but new to the SGS flashing...
when you repartition you need a PIT file.
My advice is to not repartition unless you need it.
Too late... I did it got stuck into bootloop. I had an error when I tried to install the zip from the recovery (I had recovery 3e) : E : Short write of /tmp/sideload/package.zip (No space left on device) . However, I flashed the back eclair JHL and went back to the stock eclair rom. I am going to restart from there following your intructions. I now have recovery 2e ( Somehow I can't get ClockWorkMod Recovery to load directly; it always send me to recovery 2e and there I apply update.zip to go to CWM recovery)
Thanks for your help, I'll let you know if I manage to get it done.
Still get the error E:Short write of/tmp/sideload/package.zip (No space left on device) when try to install JVH_KC1_BMC.zip from the recovery 3e ( this recovery comes right after I flash SpeedmodK15E_withLoaders.tar ...
Don't know what else to try... Help please..
I did it a slightly different way. From 2.2, I flashed a stock 3 part gingerbread rom (phone, PDA, CSC) with bootloader update using ODIN 1.82. I then flashed CF root gingerbread kernel for CWM3 and then flashed the KC1 modem from clockwork recovery for the 850 band.
Could you please show me the exact files you used so I can try to do the same ?
Aren't there at least a couple threads on how to install jvh/jvp on an i9000? Its the exact same process as those you just have to flash the kc1 modem via cwm after you are done. It sounds like you guys are experimenting too much.
Sent from my Darky's i9000m
nguetto said:
Could you please show me the exact files you used so I can try to do the same ?
Click to expand...
Click to collapse
Our canadian phone is not really different from all the other ones, so you don't need a special "Bell Canada" installation.
If you want JVH, you can follow this thread:
http://forum.xda-developers.com/showthread.php?t=818556
You don't have to do everything like fugumod, etc. I would flash JVH via odin and then flash CF root kernel via odin so you get CWM3.
There's also leaked 2.3.4 JVP gingerbread out, if you feel inclined:
http://forum.xda-developers.com/showthread.php?t=1102881
There's a way to enable 850 band on the different gingerbread modems, but i never bothered, I just flashed the KC1 modem for Bell which has the band (via CWM3). Search for I9000UGKC1
http://forum.xda-developers.com/showpost.php?p=9874879&postcount=1
Okay I am really starting to freak out now...
I am stuck in bootloop, I can't get out og it. I tried flash Back the Stock Bell Firmware but it keeps boot looping. Download mode is okay. But it started doing this I had a message like sd could not be mounted in recovery 3e. Now I can't even access recovery after I flash Eclair but Download mode is still okay...
Aby ideas ?
Have you tried flashing back the stock JL2 firmware from bell? (found on samfirmware.com)
I've never encountered this error before, I wonder if it is a problem with the bootloaders, as the official froyo firmware from bell had a secondary bootloader and gingerbread has its own bootloaders as well.
nguetto said:
Okay I am really starting to freak out now...
I am stuck in bootloop, I can't get out og it. I tried flash Back the Stock Bell Firmware but it keeps boot looping. Download mode is okay. But it started doing this I had a message like sd could not be mounted in recovery 3e. Now I can't even access recovery after I flash Eclair but Download mode is still okay...
Aby ideas ?
Click to expand...
Click to collapse
I imagine you'll need the stock bell firmware as said above and also the proper PIT file to go along with it.
Sent from my Darky's i9000m
Also if you repartitioned it when you tried to flash the whatever it was when you tried you will also have to repartition it when going back down to froyo.
2.2 and 2.3 use different bootloaders therefore if you try to mix and match rom's without the bootloaders and repartioning you will get a ****y phone.
Sent from my Darky's i9000m
Thanks for your help guys. I didn't solve it yet, but i will open a new thread to prevent this one from getting to messy.
Here is the 100% working method. No chance to fail. Unless you make a mistake somewhere.
Download Stock ROM from below link. (thanks to Chainfire)
With bootloaders: http://www.multiupload.com/IZLCKQ3VJC
Extract the zip file to a folder. There after extract the .tar file to a folder.
Open Heimdall (you should know the drill how it works) place the files from extracted folder in respective fields .
At the place of modem, do not use the one from extracted folder. Use the link below for JPZ modem
http://www.multiupload.com/F9Z64KG9XO
unzip the file and extract modem.bin, copy in phone.
Now hit START.
After completion, reboot & immediately go to ODIN 3.1.7 download mode Oops! that’s how I worked (Heimdall & then odin ). Flash dbdata.tar as PDA (NO repartition) found in the below link.
http://forum.xda-developers.com/showthread.php?t=1073854
Reboot and relax a little. As you over worked
It will boot to Ginger 2.3.3
Still you cannot flash custom ROM’s for that you got to reboot in Odin one’s again.
Kernel for clockwork recovery (custom ROM flashable) (thanks to Chainfire)
http://forum.xda-developers.com/showthread.php?t=885734
download the last file from the list. i.e.
CF-Root-TAB7_XX_OXA_JQ1-v3.3-CWM3RFS.zip
Put in PDA and start. It will reboot and there you are ready with your flashable Gingerbread SGT.
For OVERCOME ROM 2.0 beta (Thanks to Sir Alterbridge) download the below file
http://www.multiupload.com/QW65A4Q794
copy the zip to internal SD
go to recovery, choose zip from internal SD …. Flash!
I’m waiting for BoyPPC ROM as he might probably come out with the MIUI Rom. As Mr. Alterbridge is not into eye candy stuff his work is too serious.
Is this for all verions of the SGT? IE sprint/verizon/gsm?
Odin works for me for all flash, i.e. Main rom and dbdata
Sent from my GT-P1000 using XDA Premium App
I would like to know the same also, can this be flashed with cdma version galaxy tab?
Sent from my SCH-I800 using XDA App
Would be better to title the topic better. If you was browsing teh list it would look like you was asking for help in flashing. It would be much better to make title more descriptive and tag it with [GUIDE] and take away the "??" from the end.
Probably best tu number or bullet point, make paragraphs to separate steps etc, would give it more structure.
btw, you do know that the overcome rom that is linked to in this guide comes with a very complete and precise guide to follow itself anyway?
gshadow325 said:
Is this for all verions of the SGT? IE sprint/verizon/gsm?
Click to expand...
Click to collapse
only for GSM. havn't tried on others
TheATHEiST said:
Would be better to title the topic better. If you was browsing teh list it would look like you was asking for help in flashing. It would be much better to make title more descriptive and tag it with [GUIDE] and take away the "??" from the end.
Probably best tu number or bullet point, make paragraphs to separate steps etc, would give it more structure.
btw, you do know that the overcome rom that is linked to in this guide comes with a very complete and precise guide to follow itself anyway?
Click to expand...
Click to collapse
I felt it is quiet confusing when it says there are fifteen steps to follow when actually they aren't
jacktackle said:
I felt it is quiet confusing when it says there are fifteen steps to follow when actually they aren't
Click to expand...
Click to collapse
.......................?
jacktackle said:
I felt it is quiet confusing when it says there are fifteen steps to follow when actually they aren't
Click to expand...
Click to collapse
That depends on if you want to back uo your apps or not, but for most people/everyone else it was clear instructions.
| Don't Revive Me Bro! |
GANJDROID said:
That depends on if you want to back uo your apps or not, but for most people/everyone else it was clear instructions.
| Don't Revive Me Bro! |
Click to expand...
Click to collapse
there was much more then just backup like rooting and stuff. i believe people who jump to ginger all ready went through all that process. i think Appbackup is working like charm plus you can save the apk's and flash to any device. or may be titanium is better not much into it though.
Ganjdroid, i was going through your Miui post. it's not that simple to get them working you know? i wish if some one can incorporate those files in a ROM and make it as a ready made dish Ginger without MIUI is like nothing but Froyo.
Sorry but there just isnt any need for this guide really. The overcome one isnt complicated at all and you can just skip past backup up upps section if you need to.
Plus you have no need to use heimdall and then Odin, you can just use Odin.
You also say to use a specific modem file but dont explain what version of tab that file is for, somebody may be using this "guide" that doesnt want/need that file.
If you want to successfully and accurately flash to GB stock or Overcom custom you should follow the proper guide in the Overcome thread.
TheATHEiST said:
Sorry but there just isnt any need for this guide really. The overcome one isnt complicated at all and you can just skip past backup up upps section if you need to.
Plus you have no need to use heimdall and then Odin, you can just use Odin.
You also say to use a specific modem file but dont explain what version of tab that file is for, somebody may be using this "guide" that doesnt want/need that file.
If you want to successfully and accurately flash to GB stock or Overcom custom you should follow the proper guide in the Overcome thread.
Click to expand...
Click to collapse
The reason behind this post was, i shared what iv'e experienced and there are many who could not successfully port through Odin even i faced a problem with one of the tab. i feel Heimdall for flashing Stock ROM's is more friendly then Odin.
jacktackle said:
The reason behind this post was, i shared what iv'e experienced and there are many who could not successfully port through Odin even i faced a problem with one of the tab. i feel Heimdall for flashing Stock ROM's is more friendly then Odin.
Click to expand...
Click to collapse
I kind of understand, im having the oposite experience though. I'm trying to get CM7 on my tab using heimdall but cant seem to get it to boot
tutorial needed
Hi,
For those who have flashed the JQ1 successfully using Odin3 v1.70, can you please advise the full procedure/config for an Android noob?
Understand that it should be:
- Repartition Enabled
- Shall I click "phone bootloader Update"?
- Pit: gt-p1000_mr.pit provided by Chainfire in the JQ1 Thread.
- PDA: P1000XXJQ1_P1000XXJQ1_P1000XXJPZ_HOME.tar
- Phone: Pls advise how to use the JPZ-Modem.zip on the first post.
Edit: found the how to for the modem
- CSC: ¿?
Thanks and pls bear with me.
ypsmav said:
Hi,
For those who have flashed the JQ1 successfully using Odin3 v1.70, can you please advise the full procedure/config for an Android noob?
Understand that it should be:
- Repartition Enabled
- Shall I click "phone bootloader Update"?
- Pit: gt-p1000_mr.pit provided by Chainfire in the JQ1 Thread.
- PDA: P1000XXJQ1_P1000XXJQ1_P1000XXJPZ_HOME.tar
- Phone: Pls advise how to use the JPZ-Modem.zip on the first post.
Edit: found the how to for the modem
- CSC: ¿?
Thanks and pls bear with me.
Click to expand...
Click to collapse
No need to explain anything. Its already all documented in teh custom GB rom thread. here. Just download guide and read.
TheATHEiST said:
I kind of understand, im having the oposite experience though. I'm trying to get CM7 on my tab using heimdall but cant seem to get it to boot
Click to expand...
Click to collapse
well, i use heimdall only for stock ROM's for rest i mean for Custom Rom's they made Clockwork.
partition check and un check play's important role also. people just ignore it sometimes while flashing Kernel's with Odin.
jacktackle said:
Here is the 100% working method. No chance to fail. Unless you make a mistake somewhere.
Download Stock ROM from below link. (thanks to Chainfire)
With bootloaders: http://www.multiupload.com/IZLCKQ3VJC
Extract the zip file to a folder. There after extract the .tar file to a folder.
Open Heimdall (you should know the drill how it works) place the files from extracted folder in respective fields .
At the place of modem, do not use the one from extracted folder. Use the link below for JPZ modem
http://www.multiupload.com/F9Z64KG9XO
unzip the file and extract modem.bin, copy in phone.
Now hit START.
After completion, reboot & immediately go to ODIN 3.1.7 download mode Oops! that’s how I worked (Heimdall & then odin ). Flash dbdata.tar as PDA (NO repartition) found in the below link.
Click to expand...
Click to collapse
<< Now that I successfully completed the above steps, my tab is no longer connecting with ODIN, no COM connected (used to see COM4 before) >> old
I rebooted while connecting to the PC and tab was then detected by Windows then back to download mode > ODIN > dbdata.tar > wipe everything > reboot
and guess what nothing more than a Samsung logo when I boot the T
jacktackle said:
Here is the 100% working method. No chance to fail. Unless you make a mistake somewhere.
Download Stock ROM from below link. (thanks to Chainfire)
With bootloaders: http://www.multiupload.com/IZLCKQ3VJC
Extract the zip file to a folder. There after extract the .tar file to a folder.
Click to expand...
Click to collapse
dbdata.rfs is missing in the tar file, where can I get it? Can I use dbdata.rfs from another package? thx in advance
DinoZ1 said:
<< Now that I successfully completed the above steps, my tab is no longer connecting with ODIN, no COM connected (used to see COM4 before) >> old
I rebooted while connecting to the PC and tab was then detected by Windows then back to download mode > ODIN > dbdata.tar > wipe everything > reboot
and guess what nothing more than a Samsung logo when I boot the T
Click to expand...
Click to collapse
this is simple and for all those who think their tab/phone do not connect to Odin.
plug in your usb to the pc. go to device manager. uninstall the samsung driver which is already there. refresh the drivers or unplug and replug the usb cable. will search for the driver and install it again. there u r connected to the ODIN.
have a nice day!
jacktackle said:
Here is the 100% working method. No chance to fail. Unless you make a mistake somewhere.
Download Stock ROM from below link. (thanks to Chainfire)
With bootloaders: http://www.multiupload.com/IZLCKQ3VJC
Extract the zip file to a folder. There after extract the .tar file to a folder.
Open Heimdall (you should know the drill how it works) place the files from extracted folder in respective fields .
At the place of modem, do not use the one from extracted folder. Use the link below for JPZ modem
http://www.multiupload.com/F9Z64KG9XO
unzip the file and extract modem.bin, copy in phone.
Now hit START.
After completion, reboot & immediately go to ODIN 3.1.7 download mode Oops! that’s how I worked (Heimdall & then odin ). Flash dbdata.tar as PDA (NO repartition) found in the below link.
http://forum.xda-developers.com/showthread.php?t=1073854
Reboot and relax a little. As you over worked
It will boot to Ginger 2.3.3
Still you cannot flash custom ROM’s for that you got to reboot in Odin one’s again.
Kernel for clockwork recovery (custom ROM flashable) (thanks to Chainfire)
http://forum.xda-developers.com/showthread.php?t=885734
download the last file from the list. i.e.
CF-Root-TAB7_XX_OXA_JQ1-v3.3-CWM3RFS.zip
Put in PDA and start. It will reboot and there you are ready with your flashable Gingerbread SGT.
For OVERCOME ROM 2.0 beta (Thanks to Sir Alterbridge) download the below file
http://www.multiupload.com/QW65A4Q794
copy the zip to internal SD
go to recovery, choose zip from internal SD …. Flash!
I’m waiting for BoyPPC ROM as he might probably come out with the MIUI Rom. As Mr. Alterbridge is not into eye candy stuff his work is too serious.
Click to expand...
Click to collapse
Hi,
i've downloaded "http://www.multiupload.com/IZLCKQ3VJC" but there is not "dbdata.rfs", only a "hidden.rfs". What file i've to put into database.data ?
Many thanks
Hi, I have android 2.3.5 and I would like to go to 4.0, but do not know where and how to choose the rom and cf-root (I've read that I need to be matched to each other)
Maybe they are in a safe and reliable sets?
If you got example: xxjvt. Then you flash the xxjvt cf root kernel, you will find them all in cf root thread.
Sent from my GT-I9000 using Tapatalk 2
Here xxjvt http://db.tt/sJ2uJB3F
And the cf root http://db.tt/9jugXMKM
Or search cf root for your rom here http://forum.xda-developers.com/showthread.php?t=788108
Donovan662 said:
Here xxjvt http://db.tt/sJ2uJB3F
And the cf root http://db.tt/9jugXMKM
Or search cf root for your rom here http://forum.xda-developers.com/showthread.php?t=788108
Click to expand...
Click to collapse
cf root link is broken
I download this, and i see 4 files, normal need 3.
i have x2 csc
GT-I9000-CSC-HOME-MULTI-OXAJVT.tar 9 mb
GT-I9000-CSC-MULTI-OXAJVT.tar 86mb
hat to do with it ??
ElectroByMe4 said:
cf root link is broken
I download this, and i see 4 files, normal need 3.
i have x2 csc
GT-I9000-CSC-HOME-MULTI-OXAJVT.tar 9 mb
GT-I9000-CSC-MULTI-OXAJVT.tar 86mb
hat to do with it ??
Click to expand...
Click to collapse
Cf root http://db.tt/9jugXMKM
i used the 86 MB the other one u can delete it
when I will install this rom mark re-partition options?
ElectroByMe4 said:
when I will install this rom mark re-partition options?
Click to expand...
Click to collapse
Go to download mode first
Yeah tick it and the 2 next to it also
Here is An example where to put the files in
PDA, select CODE_I9000XXJVS_CL565837_REV03_user_low_ship.tar
Phone, select MODEM_I9000XXJVS_REV_00_CL1059471.tar )
CSC, select GT-I9000-CSC-MULTI-OXAJVS.tar
PIT, select s1_odin_20100512.pit
After it Will say pass and reboots automaticly, installing the rom
When everything is installed go into download mode again and flash kernel
thanks !
Last question
when I will install "gapps" then install it as update.zip ? yes?
ElectroByMe4 said:
thanks !
Last question
when I will install "gapps" then install it as update.zip ? yes?
Click to expand...
Click to collapse
May I know which custom rom u chose? U can try x-bean 3.0 + Semaphore 2.5.0s it got gapps included http://forum.xda-developers.com/showthread.php?t=1829256
It may be that u have 2 flash custom 2 or 3 times
Otherwise flashing gapps is the same way u flash a rom. Think it was install from sd card then choose from sd card something like that and navigate to it
Hi guys! This is a noob-proof guide on how to flash stock samsung firmware on your i9300. Whether you have bricked it or just want the stock firmware back. Here's how to do it (detailed explaination)
WARNING! : This is only for the GT i9300 (international version) , Check your device before proceeding. Also you might lose all your data. So backup! i am not responsible if you brick your phone(although very unlikely) by not following the guide properly
Also you will lose your custom recovery, Custom ROM and will not longer have root
Ok lets begin!
1. Make sure you have the samsung drivers installed on your pc (http://bit.ly/SDaIIE)
2. Your device should have at least 80% battery left
3. Enable USB Debugging by going to Settings>Developer Options>Tick the Usb debugging tick box!
Files needed :
1. Android 4.1.2 I9300XXEMC3 for Galaxy S3 I9300 - http://www.hotfile.com/dl/202240205/4dcf384/I9300XXEMC3_I9300NEEEMC1_NEE.zip.html
2. Odin 3.07 - http://bit.ly/16aRzF4
Extract The firmware Zip file until you get a file with a .tar extension and some other files. Do not extract furthur
Extract odin zip file till you get Odin3 v3.07.exe
Now here comes the actual flashing part
1. Power off your smartphone. Wait 5-6 seconds for vibration to confirm complete switch off.
2. Now, get into Download Mode by pressing and holding Volume Down, Home and Power button simultaneously until Samsung Galaxy logo appears in phone screen. Wait few seconds and your phone will be in download mode.
3.Open odin as administrator and connect your s3 to your computer with usb cable
4. You will get a message "Added" in the message box in odin and You should also see COM port with a number in Yellow if you successfully added your device.
if you don't get this , try another usb port.. if it still doesn't come , reinstall drivers.
5. Select these files from I9300XXEMC3 folder in Odin at respective buttons:
Click the PDA Button, and select the .tar.md5 file here with *code* appearing in its name
Click the Phone Button, and select file with *modem* in its name (leave if there is no such file)
Click the CSC Button, and select file with *csc* in its name (leave if there is no such file)
Click the PIT Button, and select the .pit file. Use only if you got it while extracting , otherwise ignore it.
6. make sure Auto Reboot and F. Reset Time checkboxes are selected. Also, make sure that Re-Partition checkbox is selected, only if you are using a .pit file
7. Double check everything above and hit start!
8. once flashing is complete the phone will reboot automatically and soon you will see a PASS message with green background in the left-most box at the very top of the Odin. You can then unplug the USB cable to disconnect your device from computer.
After completing these steps, Make sure to wipe the cache and do a factory reset in clockworkmod recovery if you do happen to find yourself in a bootloop (phone rebooting continuously) Or just do it anyways to prevent a bootloop from occurring.
congrats! , you have just restored your i9300!
If this has helped you make sure to hit the thanks button!
should be in General
We already have this exact same topic posted .
jje
Deleted OS
Please Help me this is important i had Galaxy s3 cyanogen mod 10.1 and i wanted to get back to stoke firmware i get to CWM and i did this:
wiped cash
wiped divlyk
format system
format data
actually i format the phone to Zero i tried to flash stoke firmware with odin but it's not installing it get to NAND Write Start!!
and stop please help me !!!!
Great simple procedure.. it seems as I never tried... I entered Android world recently..
Just wanted to know few things..
I bought S3 with ICS. upgraded to 4.1.2 but I feels some lagging after upgrade.
So questions are :
1. Can I get back to ICS without voiding my warranty?
2. Can I use this method to install 4.1.2 which may have no lagging issues.?
Help much appreciated..!
Thank you in advance..!
Thread Moved to General.
Bad_boy46 said:
Please Help me this is important i had Galaxy s3 cyanogen mod 10.1 and i wanted to get back to stoke firmware i get to CWM and i did this:
wiped cash
wiped divlyk
format system
format data
actually i format the phone to Zero i tried to flash stoke firmware with odin but it's not installing it get to NAND Write Start!!
and stop please help me !!!!
Click to expand...
Click to collapse
Make sure you don't attach the USB cable into a hub.
Sent from Hell thanks to Android
---------- Post added at 01:41 PM ---------- Previous post was at 01:39 PM ----------
amit3880 said:
Great simple procedure.. it seems as I never tried... I entered Android world recently..
Just wanted to know few things..
I bought S3 with ICS. upgraded to 4.1.2 but I feels some lagging after upgrade.
So questions are :
1. Can I get back to ICS without voiding my warranty?
2. Can I use this method to install 4.1.2 which may have no lagging issues.?
Help much appreciated..!
Thank you in advance..!
Click to expand...
Click to collapse
Yes and no... You must reformat partitions and upload an ICS bootloader. Not for the regular user i'm afraid
Sent from Hell thanks to Android
amit3880 said:
Great simple procedure.. it seems as I never tried... I entered Android world recently..
Just wanted to know few things..
I bought S3 with ICS. upgraded to 4.1.2 but I feels some lagging after upgrade.
So questions are :
1. Can I get back to ICS without voiding my warranty?
2. Can I use this method to install 4.1.2 which may have no lagging issues.?
Help much appreciated..!
Thank you in advance..!
Click to expand...
Click to collapse
Yup you can use this method to restore to ICS...
Download ICS Firmware - Click here
Now flash this firmware...
Hit Thanks if i helped
Bad_boy46 said:
Please Help me this is important i had Galaxy s3 cyanogen mod 10.1 and i wanted to get back to stoke firmware i get to CWM and i did this:
wiped cash
wiped divlyk
format system
format data
actually i format the phone to Zero i tried to flash stoke firmware with odin but it's not installing it get to NAND Write Start!!
and stop please help me !!!!
Click to expand...
Click to collapse
This normally happens when the partitions on the embedded multi media card gets corrupted for whatever reason, also known as the emmc.
The phone can be revived by flashing a pit file to repartition the emmc in order so it can be written to.
Download and unzip this file and you will have a .pit file which you put in the tab marked PIT in Odin
GT-I9300_mx_20120220.pit = Galaxy S3 of 16 Gb
GT-I9300_mx_20120322.pit = Galaxy S3 of 32 Gb
GT-I9300_mx_20120329.pit = Galaxy S3 of 64 Gb
(Just google the one that you need and download it)
Next make sure > r partition, f /reset, and auto reboot are ticked in options in Odin.
Next put the stock rom in the tab marked PDA, if flashing a custom rom then flash a rooted kernel first in PDA together with the pit file, hit start and start the flashing process, afterwards this will also give you the option of flashing the rom from recovery, next, flash the custom rom from Odin or from recovery
When finished the phone should reboot and start up.
Hit the thanks button if i helped
TechMasta said:
This normally happens when the partitions on the embedded multi media card gets corrupted for whatever reason, also known as the emmc.
The phone can be revived by flashing a pit file to repartition the emmc in order so it can be written to.
Download and unzip this file and you will have a .pit file which you put in the tab marked PIT in Odin
GT-I9300_mx_20120220.pit = Galaxy S3 of 16 Gb
GT-I9300_mx_20120322.pit = Galaxy S3 of 32 Gb
GT-I9300_mx_20120329.pit = Galaxy S3 of 64 Gb
(Just google the one that you need and download it)
Next make sure > r partition, f /reset, and auto reboot are ticked in options in Odin.
Next put the stock rom in the tab marked PDA, if flashing a custom rom then flash a rooted kernel first in PDA together with the pit file, hit start and start the flashing process, afterwards this will also give you the option of flashing the rom from recovery, next, flash the custom rom from Odin or from recovery
When finished the phone should reboot and start up.
Hit the thanks button if i helped
Click to expand...
Click to collapse
Thanks my friend But it still have the same problem It's get to NAND Write Start!!! and on my s3 the blue line in download mod freeze i still can get to CWM i tried to install cyanogen mod rom Zip file but it's not booting please any Other ideas
Enabling USB debugging is completely useless and a waste of time
Bad_boy46 said:
Thanks my friend But it still have the same problem It's get to NAND Write Start!!! and on my s3 the blue line in download mod freeze i still can get to CWM i tried to install cyanogen mod rom Zip file but it's not booting please any Other ideas
Click to expand...
Click to collapse
Try Re-partitioning your phone.. Put the .pit file in the repartition section , Tick that re-partition checkbox in odin and hit start.. after re-partition try to flash the .tar file again :good:
Hit thanks if i helped
TechMasta said:
Yup you can use this method to restore to ICS...
Download ICS Firmware - Click here[/URL]
Now flash this firmware...
Hit Thanks if i helped
Click to expand...
Click to collapse
Thanks for replying!
Last question.. does flashing the stock ICS firmware voids my warranty??
Thx
If it is an official ROM package, it shouldn't trigger yellow triangle.
Even in that case, you can use Triangle Away app from Chainfire and see how it comes to zero
Sent from Hell thanks to Android
Glebun said:
Enabling USB debugging is completely useless and a waste of time
Click to expand...
Click to collapse
EXACTLY, Ho coulld you do that when you have a bricked phone.
it doesn't matter if you can do it - it's as useless as changing the wallpaper before flashing
TechMasta said:
Try Re-partitioning your phone.. Put the .pit file in the repartition section , Tick that re-partition checkbox in odin and hit start.. after re-partition try to flash the .tar file again :good:
Hit thanks if i helped
Click to expand...
Click to collapse
i did flash the GT-I9300_mx_20120220.pit file but same problem but when i flash it the CWM goes from the phone so i tried to flash the cf-root file but it stop at NAND write start!!! so i flashed the mx.pit file and after that i tried to flash the cf-root file and i managed to flash it and my custom binary Counter Increases but when i try for the firmware it get stuck in NAND write start!!! (im GONE crazy)
guys please i need help where are the developers ?!
I don't know much of what you two talked about because i am a noob too. You should make a topic about it man!