Database Users

[Q] Confirm how to flash a ROM upgrade?

I have done a lot of searching on this topic, but as yet have not been able to find a specific answer for the SGTab. So I hope I am not asking for the obvious, even for a noob.
I have done a full flash with no trouble (thanks to the XDA guides and videos, and Roto's great ROMs), but now I want to install an upgrade.zip From what I have gathered, I can do this by copying the upgrade.zip to the SD card, and then accessing it through the tab's recovery mode (power+vol_down), rather than flashing through Odin.
I would very much like to confirm if I am on the right track, and also whether I put the .zip file on the SD card or the extracted file?
Thanks for your help.
_________________
Sorry - I think the recovery mode should be power + vol_up

What is the purpose of the upgrade.zip? Like a theme, or a rom upgrade?

It is Rotos JMI v2 upgrade.

I ran the upgrade with Odin as PDA. No pit file, No modem file, No repartition required.

I think what he wants to know isflashing ghe update on recovery mode instead of using odin for that instant.. well id like to know that too

The Roto upgrades are made for Odin, and not made to be ran as that type of upgrade. Roto said that down the road, using the recovery Chainfire was building, he would bundle his upgrades as an upgrade.zip, but not yet.

rangercaptain said:
The Roto upgrades are made for Odin, and not made to be ran as that type of upgrade. Roto said that down the road, using the recovery Chainfire was building, he would bundle his upgrades as an upgrade.zip, but not yet.
Click to expand...
Click to collapse
Thanks for the explanation, I now know why it didn't work. However, Odin did so I have got to where I wanted. Thanks.
However, if I was to be using that type of update, is the process I mentioned the way to do it, i.e. copy update.zip to the sdcard root and process through the tab recovery mode?

njackson said:
However, if I was to be using that type of update, is the process I mentioned the way to do it, i.e. copy update.zip to the sdcard root and process through the tab recovery mode?
Click to expand...
Click to collapse
Yes that is the process. It is the usual method to flash roms, modems, themes, etc. the time is very close for tab owners. I am trying a beta of this process when I finish my daily reading of xda.

HELP : accidentally uninstalled TouchWiz

I accidentally uninstalled Touchwiz using Titanium Backup. Since I already use ADW.Launcher, I thought its not a big deal, until I did a hard reset.
Upon hard reset, my Galaxy S tries to install Touchwiz, which of course fails, and the darn phone just crashes and hangs. I managed to get it to boot up eventually after some trouble, but I'll prefer not to have to do this everytime I hard reset.
Can someone please please send me the TouchWiz apk and odex files so that I can put them back in the system directory ? I'm using stock Froyo 2.2 ( Build FROYO.DXJPA, Kernel 2.6.32.9 ). Please email them to [email protected], or tell me where I can download them.
I know this would cease to be a problem if I just flash a custom rom, and I would love to try that in future, but not now.
Thanks so much in advance.

Easy way would be to go to the Rom Kitchin build update zip with only the Touchwizz in it and flash it from SD card via CWM.
http://romkitchen.org/sgs/?s=generator
APK might be in Perkas file stash from this forum ..###
jje

JJEgan said:
Easy way would be to go to the Rom Kitchin build update zip with only the Touchwizz in it and flash it from SD card via CWM.
http://romkitchen.org/sgs/?s=generator
APK might be in Perkas file stash from this forum ..###
jje
Click to expand...
Click to collapse
Thanks, but I'm on 2.2, which means I have the 3e loader which does not allow me to setup update.zips which are unsigned. For this reason, i was also not able to get CWM installed. I know there's a way to downgrade the loader to 2e, but I'll rather not try that at this moment.

I agree with jje. The best and probably easiest way would be to flash 2e recovery. Chainfire has created a kernel for that purpose and as long as you can access download mode you should be fine.
Sent from my GT-I9000 using XDA Premium App

chriszzz said:
Thanks, but I'm on 2.2, which means I have the 3e loader which does not allow me to setup update.zips which are unsigned. For this reason, i was also not able to get CWM installed. I know there's a way to downgrade the loader to 2e, but I'll rather not try that at this moment.
Click to expand...
Click to collapse
Flash SpeedMOD kernel with Odin and you'll get CWM.

Hi JJEgan, anfearg, Intratech
Thanks for the advice so far. But would it be possible for me to just simply use a file manager to copy the TouchWiz apk and odex files to my system/app directory ? My phone is rooted, so I know it's possible as long as I can get those files. I'm just not sure if there's anything else that needs to be configured to get Android to use those files during setup. If this is workable, this would be the easiest route. Now I just need to get my hands on those files.
I know Odin can fix this, but I'll rather just stick to the current stock rom for now, and just add the missing 2 files.
Intratech said:
Flash SpeedMOD kernel with Odin and you'll get CWM.
Click to expand...
Click to collapse

I'm going to take a look at Odin and see if its not too risky to flash my i9000. I've flashed my old WinMo phones in the past, so flashing is not new to me. But I've yet to try it for Android. Maybe I'll give it a go.
chriszzz said:
Hi JJEgan, anfearg, Intratech
Thanks for the advice so far. But would it be possible for me to just simply use a file manager to copy the TouchWiz apk and odex files to my system/app directory ? My phone is rooted, so I know it's possible as long as I can get those files. I'm just not sure if there's anything else that needs to be configured to get Android to use those files during setup. If this is workable, this would be the easiest route. Now I just need to get my hands on those files.
I know Odin can fix this, but I'll rather just stick to the current stock rom for now, and just add the missing 2 files.
Click to expand...
Click to collapse

OK, so I spent a couple of hours googling and downloaded Odin, a couple of stock ROMs, PIT files and USB drivers. Fired up Odin, followed instructions, and I'm now back to 2.1 with the 2e loader. Sweet. Had a heart stopping moment when Odin said "FAILED" in red, so i just reflashed another ROM and it went through successfully.
Looks like I'm in the ROM flashing crowd now.
Quick question : some ROMs ( like the one I flashed successfully with Odin ) contains just a few tars - 1 each for CODE/PDA, CSC and MODEM/Phone.
Others ( like the one that Odin failed to flash ) just contains a bunch of directories with files that have bin, rfs, lfs extensions.
Why are there 2 different types of ROM packaging ? Is the first one ( with the tar files ) specific to Odin ? How do I flash the other type then ? With ClockWorkMod ?
chriszzz said:
I'm going to take a look at Odin and see if its not too risky to flash my i9000. I've flashed my old WinMo phones in the past, so flashing is not new to me. But I've yet to try it for Android. Maybe I'll give it a go.
Click to expand...
Click to collapse

chriszzz said:
OK, so I spent a couple of hours googling and downloaded Odin, a couple of stock ROMs, PIT files and USB drivers. Fired up Odin, followed instructions, and I'm now back to 2.1 with the 2e loader. Sweet. Had a heart stopping moment when Odin said "FAILED" in red, so i just reflashed another ROM and it went through successfully.
Looks like I'm in the ROM flashing crowd now.
Quick question : some ROMs ( like the one I flashed successfully with Odin ) contains just a few tars - 1 each for CODE/PDA, CSC and MODEM/Phone.
Others ( like the one that Odin failed to flash ) just contains a bunch of directories with files that have bin, rfs, lfs extensions.
Why are there 2 different types of ROM packaging ? Does each ROM come in both forms ? Can they be converted from 1 form to the other ?
Click to expand...
Click to collapse
the .tar types are to be flashed via odin only whereas the ones with the directories are to be flashed via CWM(2e recovery).... mix them up and you'll be in trouble... ;-)

You only needed to flash the recovery 2e zip file through Odin from the forum .
jje

chriszzz said:
<snipped>.. Others ( like the one that Odin failed to flash ) just contains a bunch of directories with files that have bin, rfs, lfs extensions.
Why are there 2 different types of ROM packaging ? Is the first one ( with the tar files ) specific to Odin ? How do I flash the other type then ? With ClockWorkMod ?
Click to expand...
Click to collapse
The single .tar file with .rfs, .bin, etc. is a high-level package. It's sort of a firmware update and can only be flashed on top of an existing firmware. That is, you don't tick re-partition in odin. The ones that come with 3 separate files for CSC, PDA and MODEM are either medium or low-level packages. I think, the low-level ones come with bootloaders. These can be flashed with re-partition ticked.

Thanks guys.
Today I learned how to flash using ODIN (flashed a European 2.1 ROM onto my international i9000 originally with Asian ROM, and downgraded my 3e loader to 2e).
Then I learned to use ClockWorkMod, which I used to flash Darky's ROM 9.5 ( nice ROM, although booting up seems to take an usually long time. Not sure why ). Finally, I almost had a heart attack, twice, when my phone refused to boot after flashing. Nothing a 3 button combo to download mode couldn't fix though.
Fun fun fun. Thanks all.

need urget help!! stuck at bootscreen

i tried to put up a new gingerbeard theme on my i5801[india] but did something wrong and now my phone is stuck at boot screen....
i am a noob and need help in reflashing my phone....
i had 2.1 stock and now i am thinking of flashing with 2.2 or other rom??[suggestions needed]
i read that you need to factory reset before flashing??
links needed for complete guide to falshing for noob
and also links for the 2.2 rom for i5801??
pls help guys!!!

[email protected] said:
i tried to put up a new gingerbeard theme on my i5801[india] but did something wrong and now my phone is stuck at boot screen....
i am a noob and need help in reflashing my phone....
i had 2.1 stock and now i am thinking of flashing with 2.2 or other rom??[suggestions needed]
i read that you need to factory reset before flashing??
links needed for complete guide to falshing for noob
and also links for the 2.2 rom for i5801??
pls help guys!!!
Click to expand...
Click to collapse
just flash the stock 2.1 or 2.2 using odin ..

Don't panic !
You can get the most stable 2.2 firmware xxjpm as well as the flashing steps from here..
www.forum.xda-developers.com/showthread.php?t=778880
You can try flashing a custom rom as well..just browse the development section..

Rapier07 said:
Don't panic !
You can get the most stable 2.2 firmware xxjpm as well as the flashing steps from here..
www.forum.xda-developers.com/showthread.php?t=778880
You can try flashing a custom rom as well..just browse the development section..
Click to expand...
Click to collapse
whats the difference between jpm jpf etc....
which rom should i go for???[no bugs at all]

well XXJPM is latest firmware than XXJPF

I5801ZFJPE ##
I5801ZHJPF ##
these two are available at samfirmware,which one should i get??
and which rom is best and stable??

Download I5800XXJPM
remove boot.bin and sbl.bin (edit using winrar)
then select as one package and flash

i need a credible source about jpm...iam not sure its not even in i5801 section...

We flash 5800 firmware all the time, just be sure to check for the above mentioned boot files.

i cant wait for days,i need to do something today....so going for jpm
any precautions while flashing ??

it's not in 5801 b=coz it's a 5800 rom
both are same phone (there is no difference that i know) if u goto any phone specification websites, u'll not find any difference
5801 was first created for orange-europe similar to locked blackberry and i-phones of airtel and vodaphone
then they changed the whole production stream to I5801(changed stickers and boot screen only difference)

should sd card be inserted while flashing??

the first time it starts up after flashing it's gonna take a long time
DO NOT REMOVE DATA CABLE ON ANY CONDITION DURING FLASHING
if the boot logo (the samsung screen) stays for more than 15 min, remove battery, close&restart odin, goto download mode and flash again
be sure to remove the two files-(if they are not present then no problem)

that's not a problem but let it remain inside (custom rom using data2sd & app2sd must have sd card access during flashing)

My rom suggestion:
http://forum.xda-developers.com/showthread.php?t=986831
It also contains instructions on how to flash. You can use the instructions to flash JPM too (if you dont want a custom rom), just use the JPM onepackage file instead of the indroid.
Recommended JPM download:
http://www.filesonic.com/file/183636761/JPM.tar
or
http://www.fileserve.com/file/KJFSBBq/JPM.tar
After flashing I'd suggest enabling JIT (dunno if it works with JPM, pretty sure it does. It definitely works with indroid)
http://forum.xda-developers.com/showpost.php?p=12736421&postcount=2
You could also try out the fugumod BE kernel (with overclock), however it might not be stable so its up to you:
http://forum.xda-developers.com/showthread.php?t=997367

stubborn_d0nkey said:
My rom suggestion:
http://forum.xda-developers.com/showthread.php?t=986831
It also contains instructions on how to flash. You can use the instructions to flash JPM too (if you dont want a custom rom), just use the JPM onepackage file instead of the indroid.
Recommended JPM download:
http://www.filesonic.com/file/183636761/JPM.tar
or
http://www.fileserve.com/file/KJFSBBq/JPM.tar
After flashing I'd suggest enabling JIT (dunno if it works with JPM, pretty sure it does. It definitely works with indroid)
http://forum.xda-developers.com/showpost.php?p=12736421&postcount=2
You could also try out the fugumod BE kernel (with overclock), however it might not be stable so its up to you:
http://forum.xda-developers.com/showthread.php?t=997367
Click to expand...
Click to collapse
i already downloaded jpm [115 mb] from samfirmware but not yet started the flashing process...
edit:figured it out its 243 mb after extracting

where are these files and how to remove them "boot.bin and sbl.bin"
i can only see
1,cache.rfs
2,datafs.rfs
3,factoryfs.rfs
4,modem[bin file]
5,zimage

In what format did it come in? Odin accepts .tar and .tar.md5 files
1.If its a one package (one tar) first check if it (the tar file) contains boot.bin and sbl.bin, if so REMOVE THEM. If something goes wrong while flashing them it can "brick" your phone (make it unusable and unfixable by you)
To flash click on the link i posted above and follow flashing instructions on post 4 (or post 3/5 not sure which post it is)
2.If it comes in several packages (phone csc pda bootloader) flash phone csc and pda with odin, DO NOT FLASH BOOTLOADER, same reason as above for boot and sbl.
Flashing like this is quite similar to flashing a one package (instructions- first link of previous post). The difference is you dont tick/check one package in odin and you dont choose a onepacke file, but you choose phone, csc and pda to there respective places then flash
3.It might (but shouldn't) also come as a bunch of files, factory.rfs data.rfs etc, (if there are boot.bin and sbl.bin, REMOVE THEM)if so you have to .tar them. Google for a program that can make .tar files (like 7zip).
After making the .tar file flash as it by following the instructions in the link in my previous post (its a one package flash)
EDIT: just saw your post. those two files (boot and sbl) have already been removed. If the files you do have didnt come in a .tar use method 3 in this post, if they did come in a tar use method 1

stubborn_d0nkey said:
In what format did it come in? Odin accepts .tar and .tar.md5 files
1.If its a one package (one tar) first check if it (the tar file) contains boot.bin and sbl.bin, if so REMOVE THEM. If something goes wrong while flashing them it can "brick" your phone (make it unusable and unfixable by you)
To flash click on the link i posted above and follow flashing instructions on post 4 (or post 3/5 not sure which post it is)
2.If it comes in several packages (phone csc pda bootloader) flash phone csc and pda with odin, DO NOT FLASH BOOTLOADER, same reason as above for boot and sbl.
Flashing like this is quite similar to flashing a one package (instructions- first link of previous post). The difference is you dont tick/check one package in odin and you dont choose a onepacke file, but you choose phone, csc and pda to there respective places then flash
3.It might (but shouldn't) also come as a bunch of files, factory.rfs data.rfs etc, if so you have to .tar them. Google for a program that can make .tar files (like 7zip).
After making the .tar file flash as it by following the instructions in the link in my previous post (its a one package flash)
EDIT: just saw your post. those two files (boot and sbl) have already been removed. If the files you do have didnt come in a .tar use method 3 in this post, if they did come in a tar use method 1
Click to expand...
Click to collapse
i have jpm tar file [243 mb]

flash using these instructions:
rudolf895 said:
Procedure on how to install this rom:-
YOUTUBE VIDEO ON HOW TO INSTALL CLICK HERE​
Fire up odin (ODIN>http://goo.gl/nCxCw)
Select the ops (OPS FILE>http://goo.gl/ORin0)
Then Make sure to check one package
Click on one package
Select the .tar file from the pop up window
Turn off your phone
Go to download mode(here is how>http://goo.gl/byK8G)
Connect your phone to pc via USB
Hit START!
Finally after the process is complete you will get to your home screen!
Enjoy!
Click to expand...
Click to collapse

[HOWTO] Re-flash stock kernel, after your device is rooted

Hello everyone,
I saw this question over and over around so I decided to post a quick guide here.
After I installed the insecure kernel on my SGS2, to allow me to root, I did a series of quadrant tests. And after comparing 10 runs with the 10 runs I did prior to root, I ended up with the impression that I lost about 200-400 points per run. The tests were not entirely conclusive, since the margin is not big (compared with the total). Regardless, I still wanted to try to squeeze out every bit of performance I can out of this beast. That's when I decided to re-flash the original stock kernel.
What you will need, is basically the same thing you did to gain root, but with another kernel.
Make sure you know what you are doing. I am not responsible if you do it wrong and brick your phone.
1. First download the stock kernel:
You can find the stock kernels here: http://nma.usk.bz/sgs2.php
DO NOT UNTAR THE FILE. Leave it as it is.
2. Now open Odin and put your phone in Download mode
3. IMPORTANT: Make sure that "Auto Reboot" and "F.Reset Time" are check. And that EVERYTHING else is UNchecked.
4. Load the .tar file on the PDA field. Just click on "PDA" and open the file.
5. Click "Start"
Done, you are back to your stock kernel and will keep root. This does not revert what you already installed (su, SuperUser, busybox, etc).
If you have any questions, post it here.
UPDATES:
------------
- Added XWKE7 stock kernel (05/21/2011)

Hi uskr, I think this may be the same file in this top post in this thread which is what I just flashed to but thanks for this anyway.
http://forum.xda-developers.com/showthread.php?t=1056334&page=35
uskr said:
Hello everyone,
I saw this question over and over around so I decided to post a quick guide here.
After I installed the insecure kernel on my SGS2, to allow me to root, I did a series of quadrant tests. And after comparing 10 runs with the 10 runs I did prior to root, I ended up with the impression that I lost about 200-400 points per run. The tests were not entirely conclusive, since the margin is not big (compared with the total). Regardless, I still wanted to try to squeeze out every bit of performance I can out of this beast. That's when I decided to re-flash the original stock kernel.
What you will need, is basically the same thing you did to gain root, but with another kernel.
Make sure you know what you are doing. I am not responsible if you do it wrong and brick your phone.
1. First download the stock kernel: http://nma.usk.bz/files/I9100XWKDD_StockKernel.tar
DO NOT UNTAR THE FILE. Leave it as it is.
2. Now open Odin
3. IMPORTANT: Make sure that "Auto Reboot" and "F.Reset Time" are check. And that EVERYTHING else is UNchecked.
4. Load the I9100XWKDD_StockKernel.tar file on the PDA field. Just click on "PDA" and open the file.
5. Click "Start"
Done, you are back to your stock kernel and will keep root. This does not revert what you already installed (su, SuperUser, busybox, etc).
If you have any questions, post it here.
Click to expand...
Click to collapse

Thank you for pointing it out. I had a hard time finding it when I needed. Hope this helps more people out there.
This one is from the original stock rom downloaded from kies. I just extracted the zImage.

I no this is not relevant To stock kernel but if i update my phone to newest firmware this will work the same way,?
also there is a overclock kernel out if i want overclock kernel after i update to new firmware i would need to flash the root kernel then flash the overclock kernel to beable to have my phone run newest firmware with overclock kernel that is rooted.?
Thanks
Sent from my GT-I9100 using XDA App

When we update to XWKE1, flash the unsecure KDD Kernel, root, how do we get back to KE1 Kernel?
Can you point on how to extract it?

walda said:
When we update to XWKE1, flash the unsecure KDD Kernel, root, how do we get back to KE1 Kernel?
Can you point on how to extract it?
Click to expand...
Click to collapse
+1
How can we extract only the kernel from a stock firmware?

I googled a lot and figgured out that this way should be the right.
* Flash new Firmware via ODIN (.tar File)
* Root with old KDD Kernel
* Open the FW .tar File
* Delete all except "zImage"
* Flash new .tar file via Odin
That should it be. Am not sure but
Will try when i got 100% and backuped my sdcard

So we have to delete all the files in the tar, except "zImage". I found a guide to do it, but for the *.rar, I tried with the *.tar but it didn't work
http://xona.com/2006/07/05c.html

Thanks. The kernel I used to root I think introduced an intermittent mic issue during calls.. now I'm back to the standard kernel and no more issue.

Thanks dude

The warning triangle should be gone.
Try to reflash again and see if it helps. Did you flash anything else?
Lastly, which "brand" is your phone? This is for the XEU branded phone. If you have O2 or Korean versions, you will need a different stock kernel. I can get them for you.
To check your brand, type on your phone: *#272*<your IMEI>#
You can find your IMEI number on: Menu -> Settings -> About Phone -> Status .

hakkinenvthh said:
+1
How can we extract only the kernel from a stock firmware?
Click to expand...
Click to collapse
you can extract from the .tar and then tar it under linux use this command ：
Code:
tar -cf zImage filename.tar
or google "tar for windows" then you can run it under windows
and then ,you can get a tar contains zImage and you can flash it by odin

uskr said:
The warning triangle should be gone.
Try to reflash again and see if it helps. Did you flash anything else?
Lastly, which "brand" is your phone? This is for the XEU branded phone. If you have O2 or Korean versions, you will need a different stock kernel. I can get them for you.
To check your brand, type on your phone: *#272*<your IMEI>#
You can find your IMEI number on: Menu -> Settings -> About Phone -> Status .
Click to expand...
Click to collapse
I confirm, the warning triangle was gone

Updated with a link to the new firmware kernel XWKE1, in case you are running it.

Added the stock kernel for the new XWKE2 firmware.

uskr said:
Added the stock kernel for the new XWKE2 firmware.
Click to expand...
Click to collapse
Hi, thanks. But there's something wrong with the KE2 Kernel. In the zip there is only a zimage file. I tried converting this file to a tar archieve. However flashing the tar in Odin didn't work. Can someone please upload a working tar file?

paranoid2007 said:
Hi, thanks. But there's something wrong with the KE2 Kernel. In the zip there is only a zimage file. I tried converting this file to a tar archieve. However flashing the tar in Odin didn't work. Can someone please upload a working tar file?
Click to expand...
Click to collapse
The KE2 kernel file I downloaded was the tar itself rather than the tar contained in a zip.
Using the file as downloaded in odin worked fine.

uskr said:
The warning triangle should be gone.
Try to reflash again and see if it helps. Did you flash anything else?
Lastly, which "brand" is your phone? This is for the XEU branded phone. If you have O2 or Korean versions, you will need a different stock kernel. I can get them for you.
To check your brand, type on your phone: *#272*<your IMEI>#
You can find your IMEI number on: Menu -> Settings -> About Phone -> Status .
Click to expand...
Click to collapse
Hi, I checked my brand after flashing the insecure tar, and it shows DBT (it starts boot German ) so can you tell me what i need to download to get back to UK settings.
Thanks Brian.

Hi, i've just flashed the I9100XWKE1_I9100XXKDJ_I9100OXXKE1_HOME.TAR witch is on Samfirmware (for France)
But i don't have the original kernel to flash over the rom after the root.
I don't want to flash the Xeu kernel because it is for UK.
I tried to delete the winrar files to keep only the Zimage file on this rom, but I can't delete anything.
I would be happy to know how to create the kernel.tar for the different firmwares
Or if someone could do it for me ?
Link of the rom :
http://hotfile.com/dl/117595201/b729980/I9100XWKE1_OXXKE1_XXKDJ.rar.html
thanks a lot

syps54 said:
Hi, i've just flashed the I9100XWKE1_I9100XXKDJ_I9100OXXKE1_HOME.TAR witch is on Samfirmware (for France)
But i don't have the original kernel to flash over the rom after the root.
I don't want to flash the Xeu kernel because it is for UK.
I tried to delete the winrar files to keep only the Zimage file on this rom, but I can't delete anything.
I would be happy to know how to create the kernel.tar for the different firmwares
Or if someone could do it for me ?
Link of the rom :
http://hotfile.com/dl/117595201/b729980/I9100XWKE1_OXXKE1_XXKDJ.rar.html
thanks a lot
Click to expand...
Click to collapse
7zip can delete some files in the tar. Google for it, totally free
Sent from my GT-I9100 using XDA Premium App

[Q] Flash zip file ?

hallo im a newbie, want to upgrade to froyo, but when i was download this file http://forum.xda-developers.com/showthread.php?t=1036193 (Stock Deodexed KB5) odin dint read zip file, how to flash it? or i must convert zip to tar or md5?
help me, i tired to download again, its too big

download mini kies on ur pc and upgrade to 2.2 froyo that way, i did it very easily!

There are 2 downloads in that thread. The first download is a .zip that you flash in ClockwerkRecovery. The second is a .tar.MD5 that you would use in ODIN. Its all pretty straight forward read a little more in the guides and check out the Bible as well. Good luck!
*EDIT*
Be sure to thank @Whitehawkx for providing it