Database Users

[Q] need assistance ---defy just rebooting and rebooting after 2ndinit install

need assistance ---defy just rebooting and rebooting
i installed the rom amanger premium
after that i installed the 2ndInit from market for android and installed the latest version .....and after that i uncheck the usb debugging and restarted the defy
since then its auto rebooting from logo to black screen and back to logo ....
please help me i am new to this and really pissed off .......

Flash stock sbf using RSD lite.
Sent from my MB525 using Tapatalk

jassi32 said:
need assistance ---defy just rebooting and rebooting
i installed the rom amanger premium
after that i installed the 2ndInit from market for android and installed the latest version .....and after that i uncheck the usb debugging and restarted the defy
since then its auto rebooting from logo to black screen and back to logo ....
please help me i am new to this and really pissed off .......
Click to expand...
Click to collapse
Check if the blue led comes on during boot and press down volume button then check the settings if not you gotta install a another rom I suggest nordic ii with cm7 cant go wrong
Sent from my MB525 using xda premium

Thank you guyszzzzzzzzzzz:d:d:d:d:d:d:d:d

hey guys,my first post here....
i am stuck with the infinite reboot loop from moto logo after i tried the 2ndinit install.my phones just a month old and i can use it now
i can get into the stock recovery menu by pressing -vol while booting,nothing is making any difference there.
if i press the +vol key while booting,it goes into bootloader menu,but it says battery low,cannot program. i had just rooted my phone and was trying to take a nandroid backup when this happened.
please help save my defy :-s

BUMP................

Im not a expert nor its will be t best solution, Recharge your battery on another device.. Next , try first turn on defy with vol press down, when android signal logo appears, its not boot logo..., press up & down at same time, then wipe data.. It will reset your data. Another solution its flash any sbf of your taste with rsd lite. There is a tutorial for defy beginers on stickies & defy wiki , its contain all info you will need
Giuliano
Sent from my MB525 using XDA Premium App

i update to cm 7.1 a month ago and i added my phone number in settings.....
and when flashed the sea15 froyo of my country , the phone number is still there .....any help on how to remove it stock rom or else have flash back cm7.1 to erase it ....
i want help i need to send defy for service repair .....please help .....
and thanks in advance ......

im having the same problem month ago i cant figure it out , after installing 2ndinit and the led turn into blue i reboot my device but it keeps rebooting over and over iv been searching xda fourms for one month now for a solution but all in vain , im stuck with 2.2.2 froyo i can't install CM7 or MS2Ginger , i've heard that i have to install bootmenu or something but im not sure how to !! btw once i click install recovery in 2ndinit it says success but i still can read 2ndinit recovery NOT currently installed and when i try to press uninstall it says there is nothing to do!!
please if some 1 can help me it would be a life saver for me

Closed at OP request

[Q] stuck in google logo

Hi,
I am using cynogenmod 7.1.0 RC 1.5 -jordan
I am stuck in Google logo why playing with recovery.
I read that I need to flash with sbf in boot to get back to normal
I have a problem since I am in 2.3.5 how can flash
with JRDNEM_U3_3.4.3-36-1.7.sbf
This isn't the above sbf is 2.3.4 ?? or I am missing something ?
I have got this sbf from defy wiki
http://forum.xda-developers.com/showthread.php?t=1093352
I have another question how can I CG version ?

sparkriver said:
Hi,
I am using cynogenmod 7.1.0 RC 1.5 -jordan
I am stuck in Google logo why playing with recovery.
Click to expand...
Click to collapse
Do these steps:
Auris 1.6 vvt-i said:
You are stuck in bootloop since you didn't do a clean wipe before flashing the SBF.
Press and hold Vol- and Power button. When you get to the android with yellow exclamation mark, press Vol- and Vol+ simultaneously and then wipe data/cache.
Done!
If I was getting a dime every time I have given this solution, I'd be driving a Ferrari by now
Click to expand...
Click to collapse
sparkriver said:
I have a problem since I am in 2.3.5 how can flash
with JRDNEM_U3_3.4.3-36-1.7.sbf
Click to expand...
Click to collapse
You can't. 2.3.5 is BL6 (I believe) and you want to go back to a BL4 sbf - no way.

did all you have said .
cleared cache and clear data still not booting beyond google logo
what to do now ?
"I have pressed stock recovery when I end up like this"

one more thing blue light appears and than all the below touch button flash once..
Since I can't go back and flash above sbf.
with what can I flash ??

Questions go in the Q&A section

sparkriver said:
one more thing blue light appears and than all the below touch button flash once..
Since I can't go back and flash above sbf.
with what can I flash ??
Click to expand...
Click to collapse
2.3.5 is Gingerbread kernel based and CM 7.1 - Froyo-based (as far as I can remember). Since you see the blue light, this means you have access to the boot menu and recovery mode, so just flash a GB kerne-based ROM and your phone will be fine. You can flash MS2Ginger by Walter79, for example, or you can flash Quarx's CM9 ICS builds (follow my tutorial in Defy General section)

Struck at the google logo. Nothing works after that. Tried with rsd but battery went down and unable to load Sbf.
Please help out

sunil_defy said:
Struck at the google logo. Nothing works after that. Tried with rsd but battery went down and unable to load Sbf.
Please help out
Click to expand...
Click to collapse
I too have this problem few weeks ago when I try about 6 ROMs.
I remember I forgot to wipe data and dalvik at the time of installing WIUI ROM and I have different recovery play with.
So just do one ... 1. In the recovery section go to the custom recovery and try wipe cache, and dalvik and them reboot.
2. If above step doesnt work them at the time when mobile starts .. then you see blue light glowing for some seconds ,,, when you see it press " volume down button ". you see again a stock recovery menu. In that do wipe cache and dalvik and then reboot.
In the 2nd method at the time of recovery if you see cant mount cache before wiping then may be you have to do RSD Lite procedure.
RSD lite and SBF :- http://forum.xda-developers.com/showthread.php?t=1093352
it a simple procedure. Just follow steps and you come with your official foryo 2.2.2
After that you can again install custom ROM.
Because it happens to me also. My phone shows me that there is no space in my mobile i.e phone memory is full.
So so RSD lite procedure and again back to froyo and then again install 4.1.1. jelly bean and now everything work good.

[Q] bricked defy

Yesterday I accidentaly removed some files in /data and the phobe immediately freezed.
When i tried to power on the phone i got a boot loop but i was still able to get in bootmenu and recovery mode.
Then i flashed several roms but still i got a boot loop.
then i used rds lite with various sbf including
JORDN_U3_97.21.51
3.4.2_177-005_NORDIC
but the situation is even worse because now the phone shows always a black screen

I guess you forgot to factory reset. Get into the stock recovery (power off >> hold power + up >> at the screen with android press up + down, wipe everything), reboot.

pepcisko said:
I guess you forgot to factory reset. Get into the stock recovery (power off >> hold power + up >> at the screen with android press up + down, wipe everything), reboot.
Click to expand...
Click to collapse
after flashing JORDN_U3_97.21.51, when i hold power (or power + vol up) the phone seems dead, the display remains dark.

The phone goes directly into bootloader mode even if don't hold vol up.
The screen blacklight is off but RDS lite recognize my defy.

dicktracypa said:
The phone goes directly into bootloader mode even if don't hold vol up.
The screen blacklight is off but RDS lite recognize my defy.
Click to expand...
Click to collapse
i think you flashed an wrong sbf ..... find ur stock sbf from here and flash it
and then try whatever you like

dicktracypa said:
The phone goes directly into bootloader mode even if don't hold vol up.
The screen blacklight is off but RDS lite recognize my defy.
Click to expand...
Click to collapse
You have to hold power + vol down to get into stock recovery,
Power + vol up is for bootloader mode.

whatever combination of buttons i hold, the phone goes into bootloader mode
the screen backlight turns on only while flashing.
Also i've trayed dozens of SBFs but still my defy won't resuscitate

Have the screen after flashing looked like this:
http://forum.xda-developers.com/showpost.php?p=27590063&postcount=4

dicktracypa said:
whatever combination of buttons i hold, the phone goes into bootloader mode
the screen backlight turns on only while flashing.
Also i've trayed dozens of SBFs but still my defy won't resuscitate
Click to expand...
Click to collapse
1.First check if your battery is charged. Is it charging when charger plugged in? (battery icon with percentage). If not try to charge it with other defy or external charger.
2. If u flashed nothing higher then CG5 then flash chinese eclair (first one u mentioned in the 1st post) then go to this thread, part Common Problems/Questions, use method 2. with slight modification.
1st sbf is just this eclair u mentioned - then u r done for item 1.
For item 5. choose this CM7 (do not flash maniac's CM7 - because of lack of space in the phone)
The modification is do not perform item 6. - simply do not reboot but go to 7. - wiping in CWM.
After u go to point 9. start the system. Now u can flash any CM7 or 9 from CWM

corrinti said:
1.First check if your battery is charged. Is it charging when charger plugged in? (battery icon with percentage). If not try to charge it with other defy or external charger.
2. If u flashed nothing higher then CG5 then flash chinese eclair (first one u mentioned in the 1st post) then go to this thread, part Common Problems/Questions, use method 2. with slight modification.
1st sbf is just this eclair u mentioned - then u r done for item 1.
For item 5. choose this CM7 (do not flash maniac's CM7 - because of lack of space in the phone)
The modification is do not perform item 6. - simply do not reboot but go to 7. - wiping in CWM.
After u go to point 9. start the system. Now u can flash any CM7 or 9 from CWM
Click to expand...
Click to collapse
First of all thank you for your reply.
Step 2 says: "Root your phone." The problem is that the phone can't boot up after the first step . So how am i supposed to root it?

dicktracypa said:
First of all thank you for your reply.
Step 2 says: "Root your phone." The problem is that the phone can't boot up after the first step . So how am i supposed to root it?
Click to expand...
Click to collapse
So most probably it means that u don't fulfill condition of my 2, point & your phone was flashed with full sbf with CG higher then 5.
Then hope that your defy is either red lens or plus, otherwise u lost your camera.
Here u can find sbfs with download links
This post by walter79 will give u some advice which sbf u can use and which to avoid

corrinti said:
So most probably it means that u don't fulfill condition of my 2, point & your phone was flashed with full sbf with CG higher then 5.
Then hope that your defy is either red lens or plus, otherwise u lost your camera.
Here u can find sbfs with download links
This post by walter79 will give u some advice which sbf u can use and which to avoid
Click to expand...
Click to collapse
I've tryed almost every sbf in that page but my defy is still not working.
Is there any chance to fix it or i definitely bricked it?

Do u know if u have a red lens or green lens
Sent from my MB525 using xda premium

dicktracypa said:
I've tryed almost every sbf in that page but my defy is still not working.
Is there any chance to fix it or i definitely bricked it?
Click to expand...
Click to collapse
Can you please show us what SBF's you flashed?
By what i see you probably bricked your phone.. next time you get bootloops dont flash all sbf's you see with panic, come here and you will get help

Cman41 said:
Can you please show us what SBF's you flashed?
By what i see you probably bricked your phone.. next time you get bootloops dont flash all sbf's you see with panic, come here and you will get help
Click to expand...
Click to collapse
Exactly. Unfortunately there are some posts which say 'try all sbfs untill u r lucky' instead of 'read first to understand sometimes there is no way back'
@Dicktracypa - hope it is still a chance to bring your defy back to life, but give us info colleagues above aksed for

krkdesigns said:
Do u know if u have a red lens or green lens
Sent from my MB525 using xda premium
Click to expand...
Click to collapse
It's a green lens device
Cman41 said:
Can you please show us what SBF's you flashed?
By what i see you probably bricked your phone..
Click to expand...
Click to collapse
The first sbf I flashed was the first one in this page http://sbf.droid-developers.org/umts_jordan/list.php
The phone got struck on motorola logo. Then I flashed other sbf in that page with the same result.
After flashing JORDN_U3_97.21.51 my defy seems dead: the backlight remains off when i hold the power button.
next time you get bootloops dont flash all sbf's you see with panic, come here and you will get help
Click to expand...
Click to collapse
next time I'm not buying another motorola phone, that's for sure!

corrinti said:
Exactly. Unfortunately there are some posts which say 'try all sbfs untill u r lucky' instead of 'read first to understand sometimes there is no way back'
Click to expand...
Click to collapse
That's exactly what happened. :crying: Anyway I should have read more thread before doing anything. I can't blame no one, that's only my fault
@Dicktracypa - hope it is still a chance to bring your defy back to life, but give us info colleagues above aksed for
Click to expand...
Click to collapse
Thank you for your help guys

dicktracypa said:
It's a green lens device
The first sbf I flashed was the first one in this page
The phone got struck on motorola logo. Then I flashed other sbf in that page with the same result.
After flashing JORDN_U3_97.21.51 my defy seems dead: the backlight remains off when i hold the power button.
next time I'm not buying another motorola phone, that's for sure!
Click to expand...
Click to collapse
hehe agreed, same here P:
After reviewing the list you showed us here this are all froyo/eclair SBF's means their CG's are not higher than 4, means you could even flash the great clear cee nordic to revive your defy(dont try it now though after the JORDN_U3_97.21.51). Thats really weird that your phone died after JORDN_U3_97.21.51, maybe out of battery? could you try to get another battery? maybe load it in an external charger? i dont see any reason for the phone not to boot up normally.

Cman41 said:
hehe agreed, same here P:
After reviewing the list you showed us here this are all froyo/eclair SBF's means their CG's are not higher than 4, means you could even flash the great clear cee nordic to revive your defy(dont try it now though after the JORDN_U3_97.21.51). Thats really weird that your phone died after JORDN_U3_97.21.51, maybe out of battery? could you try to get another battery? maybe load it in an external charger? i dont see any reason for the phone not to boot up normally.
Click to expand...
Click to collapse
I cant check now but maybe someone knows which CG is the first sbf in the list? I mean JORDN_U3_6.36.0_SIGNED_USAJRDNTMOB1B4B5DE1028.0R_JORDANTMO_P022_HWp3_Service1FF.sbf.gz
Is it a limit or the one mentioned already in the first post i.e. JORDN_U3...51 which is CG5?

corrinti said:
I cant check now but maybe someone knows which CG is the first sbf in the list? I mean JORDN_U3_6.36.0_SIGNED_USAJRDNTMOB1B4B5DE1028.0R_JORDANTMO_P022_HWp3_Service1FF.sbf.gz
Is it a limit or the one mentioned already in the first post i.e. JORDN_U3...51 which is CG5?
Click to expand...
Click to collapse
i already checked it its CG 4, all of the page you showed me are CG 4
But since you already flashed the chinese eclair rom which is CG 5 dont try to flash anything else but that, your phone should be able to boot just fine with that one.
Is your battery charged?

[Q] It hangs on a log "M"

Hi this is my first post on this forum, sorry for my bad English because I'm Polishman
Well, everything was nicely foaming, "I sat" on the CM10 installed the Pie controll and just had fun this application that has become so sensitive to where it was not to use the entire screen. It took out the batteries and wanted to enter in CWM to do a wipe, and there still stands on the log "M". So I took RSD and flashed stock. Still hanging on the log, and to stock recovery also can not enter because the log M.
What to do in this situation?
I installed this:
JRDNEM_U3_3.4.2_177-005_NORDIC_SIGN_SIGNED_UCAJRDNEMARAB1B80AA03A.0R_PDS03C_USAJRDNFRYORTNORD_P003_A001_HWp3_Service1FF.sbf.gz
this:
JRDNEM_U3_3.4.2_179-002_DEBLUR_SIGN_SIGNED_UCAJRDNEMARAB1B80AA03A.0R_PDS03C_USAJRDNFRYORTCEE_P016_A016_HWp3_Service1FF
and this:
JRDNEM_U3_3.4.3-36-1_CHINESE_SIGN_SIGNED_UCAJRDNEMARAB1B80AA03A.0R_PDS03C_USAJRDNFRYOVODAC_P005_A001_M002_HWp3_Service1FF
it's not working
I have normal Defy

Atom2000 said:
Hi this is my first post on this forum, sorry for my bad English because I'm Polishman
Well, everything was nicely foaming, "I sat" on the CM10 installed the Pie controll and just had fun this application that has become so sensitive to where it was not to use the entire screen. It took out the batteries and wanted to enter in CWM to do a wipe, and there still stands on the log "M". So I took RSD and flashed stock. Still hanging on the log, and to stock recovery also can not enter because the log M.
What to do in this situation?
I installed this:
JRDNEM_U3_3.4.2_177-005_NORDIC_SIGN_SIGNED_UCAJRDNEMARAB1B80AA03A.0R_PDS03C_USAJRDNFRYORTNORD_P003_A001_HWp3_Service1FF.sbf.gz
this:
JRDNEM_U3_3.4.2_179-002_DEBLUR_SIGN_SIGNED_UCAJRDNEMARAB1B80AA03A.0R_PDS03C_USAJRDNFRYORTCEE_P016_A016_HWp3_Service1FF
and this:
JRDNEM_U3_3.4.3-36-1_CHINESE_SIGN_SIGNED_UCAJRDNEMARAB1B80AA03A.0R_PDS03C_USAJRDNFRYOVODAC_P005_A001_M002_HWp3_Service1FF
it's not working
I have normal Defy
Click to expand...
Click to collapse
WIPE VIA STOCK RECOVERY. While phone is powered down hold vol-dow & power, when triangle will appear press volup+down buttons & wipe data...

I wrote I can't enter to stock recovery

So, nobody help me??

Is your defy red or green lense camera ,aka Bayer or SOC? If your camera is red you can try to install BL5 GB from Defy+ (4.5.1-134_DFP-82). If green - DON'T TRY THAT METHOD...

I have green lens

Atom2000 said:
I have green lens
Click to expand...
Click to collapse
When try 3.4.2-179-6.1 T-mobile germany rom from SBF files thread. It's BL4 so you wont screw anything with CG/BL version.

I's ok, I repair this

my defy is die after I reflash original sbf.

Hi guy,
does any one know how to back to original defy wtih sbf files? because my defy stop at Android logo. In addition, I think my problem at MIUI defy V5 because after I installed V5. I dont like it, so I use RLDs to recover my defy with SBF.
Environment and duplicate steps
MB525 (green camera)
1 - Reboot the phone when you see the blue LED volume press the button below to enter the bootmenu.
2 - Now we enter the Custom recovery
Custom recovery:
A - Wipe data
B - Wipe cache
C - install the rom and Reboot (MIUI V5 Defy/Defy+ 17.5.2013 Quarx Based on 11.5.2013 /Miui Defy/Defy V5 Optimization)
3 - Use one or two hour, then I dont like MIUI v5, so I go to wipe date and cache again under recovery mode, then defy stop at Moto's logo.
4 - I used JRDNEM_U3_3.4.3-36-1.7_CHINESE_SIGN...to reflash by RSD lite.
5 - The Defy stop at Android logo. ( I dont have any idea now. because usually reflash SBF is work for me.)

Can you take any screenshot? I cant imagine what android logo are you thinking .....
Sorry for my English

yzeroy said:
Can you take any screenshot? I cant imagine what android logo are you thinking .....
Sorry for my English
Click to expand...
Click to collapse
Thank you Yzeroy,
Android logo is second picture when you power on defy. (ex: first picture is Moto logo. second logo is Android logo)

Ok, as you said you came from MIUI v5 ( whitch is CM10) it uses EXT4 as primary partition format for data and cache ... solution si simple and easy ....
1. Turn off you mobile ....
2. Boot up Defy with POWER button and VOLUME down button pressed together
3. DO factory reset and reboot
Now it should boot

haha, I fixed this problem now, and I know the root cause. anyway, thank you very much
the root cause:
should be need to wipe date and cache again.

shoumin said:
haha, I fixed this problem now, and I know the root cause. anyway, thank you very much
the root cause:
should be need to wipe date and cache again.
Click to expand...
Click to collapse
Bro
Press thanks button if someone helped you
Sent from my Motorola Electrify using Tapatalk 2