hi everyone, need your help here.
I got RIL(Network and Data) not working after a successul TPT of Amphoras method. I've use the GEN2v2a since my blade is a GEN2 blade as mr.pigfish said.
My steps was as follows:
1. Downloaded GEN2 v2a.
2. Checked md5.
3. Did the TPT, and was successful.
4. Flashed the ROM(CM10-20121010 and its Gapp).
5. Rebooted to system.
6. Does a normal things and everything was fine except that signal icon in the status bar doesnt fills out that means no signal or i can't detect radio signal and i noticed it right after the phone was configured with personal google info and finished the setup. And SIMTOOLKIT is missing from the APPDRAWER but is the APPS list. I tried to repeat the process with some wipes and formats before installing the ROMs(cm9 amd cm10) but gives me the same result. What should i do now? Does revertig back to stock GEN2 solves my problem?
Thanks.
I have faced that problem once when I try to flash V880 TPT to my chinese blade,
it can only be fixed after flashing V880 firmware with zte flash tool (debricking tutorial from burstlam in modaco)
maybe you should use that debricking tutorial
Hi buddy, try to Install the simtoolkit . Good luck
Sent from my ZTE N881E using xda premium
Related
Hi everyone !
2 issues
Issues 1 : I flashed Markinux HD Extra Clean 1.5
seems great works great However I I am unable to download from market when I try it says your item will be downloaded and never does
I bought this phone as a project from a previous owner when I slip a tmobile sim all seems to work fin internet access etc still unable to download from market.
Issue number 2
I have clockworkmod and when I flash any other rom it goes into boot loop tried wiping everthing formating card etc
I tried to flash cm7 and Miui
Included a pic of my software setup
snipestech said:
Hi everyone !
2 issues
Issues 1 : I flashed Markinux HD Extra Clean 1.5
seems great works great However I I am unable to download from market when I try it says your item will be downloaded and never does
I bought this phone as a project from a previous owner when I slip a tmobile sim all seems to work fin internet access etc still unable to download from market.
Issue number 2
I have clockworkmod and when I flash any other rom it goes into boot loop tried wiping everthing formating card etc
I tried to flash cm7 and Miui
Included a pic of my software setup
Click to expand...
Click to collapse
For the market issue try this:- http://forum.xda-developers.com/showpost.php?p=11003567&postcount=2118
Thanks will try that great!!!
resolved
Installed 1. 6 version of the Rom markinux. And it now works
Hello there. I was wonder about about Darkys ROM so I have installed 9.5 successfully (thanks to noobish giude).
1) I have upgraded from official Samsung I9000 galaxy S (2.2) to 9.5 ROM + Dark core 1.4.
It gave perfect result - fast and stable.
2) then I did upgrade to ROM 10.1 with help of noob guide (recovery mode, no clean, update via zip file as before, disabled lag etc.). It was successfull too, BUT after install I restarted as in last instruction of upgrade and it has come:
Look at this screen in ATTACH please.
If I let it be it will boot up fine but:
1) it appears randomly inside of system (mostly when sliding notification bar up and down).
2) I cannot see recovery mode (its in there but it looks like it cannot work with display until initialization of system)
Anyone can help me please?
Then
So its solved thanks to user ceriko on official darkyrom.com.
//sorry for unfinished name of post (I am unable to edit it)
Bootloader problem. I had the same thing when I first flashed GB.
Hi ..
I had updated defy to the latest cnmod nighty version. ( 110410 ). Eveerything was working fine. i played with the phone for the entire day. video acceleration was awesome and played gt racing.
Suddenly there was problem with wifi connection. I decided to restart the phone. Choose the reboot menu . and now the phone is stuck with the moto logo on startup. Nothing happens after that.
When the bluelight blinks after the android menu , when I press the down button , I get android bootmenu v1.0.5 (By cynongen defy team and galaxy) ,
i was not able to do anything from here. It has these menus :
1)Boot : boot is set to 2nd init
2)cpu settings
3)recovery : in the recovery menu , If i choose latest recovery or stable recovery , I get error in /system/bootmenu/script/recovery.sh (Result: no such file or directory) , and when I choose stock recovery , the phone restarts and is stuck with an exclamation mark )
4)tools: I could understand what to do here.
When nothing did work , I pressed both up and down button after changing boot to normal. there i cleared some cache or something , cleared everything that I could.
After all this my phone is in the same place. A moto logo on startup.
Please can someone help me . This is my first android phone and also the first costly phone I bought and I did something nasty on the first day itself.
i am a normal end user who knows nothing more than gui.
thanks in anticipation
hey
flash a stock 2.2.2 with RDS from bootloader
you gonna need latest defy drivers for windows plus a stable froyo i guess
google this "how to unblick a bricked defy"
let us know what you do and what changes
are you sure this is a case of bricked defy. I had read in many places it is very difficult to brick defy.
its not bricked
but that is what you need to search for to get the solution
i did so too
What "Natsikap" said.
Clear Data/Cache.
Flash Official Froyo 2.2.2 using RSDLite, Use your region correct Froyo (If you are from India use SEA15 Stock ROM -Get it here http://forum.xda-developers.com/wiki/index.php?title=Motorola_Defy). Everything will be Stock normal. Read everything in the wiki before you flash anything, esp read the "How to get back to Normal in case things go awry" part you will save yourself the High BP!
thanks all for your support.
i have installed the orginal manufactuer android froyo
and flashed it later with cynogenmod 7.1 for defy. The latest stable one that was released yesterday
One more question:
Should I unroot this cynogenmod .. so that I don't mess something.
congratulations
you sorta came from behind and am sorta left behind
question: does the 7.1 have any wifi issues? working properly?
tell me so i can make the jump too
thanks bro
sorry for the late reply..
no it does not have any issues.. at least i could'nt find any.
wifi was working like a charm. used it for around 2 hours ..
Couple of questions..
1) i don't lke the menus flying into the screen. How can i change this animation to the normal fade animation that came with original os.
2)should i unroot my cynogenmod should that i don't cripple it while playing with settings or someother way.
Do not unroot CM7. Make site you make a backup in recovery, that way if you mess something up you can just restore it. As for animations, go to settings> cyanogen settings> display, you should be able to change the animations. If not try spare parts app.
Swyped from my MIUI Defy
i have defy plus.....i havnt rooted it ...its working on original 2.3.6
my phone is starting but power button not working.....when i put it on charing lock screen comes to life but touch not working..
sometimes it remains on moto logo
please help
Tried searching the forum but couldn't find anything similar.
I rooted my ideos x5 with super one click, installed clockwork mod (perfect recovery by genekolar) and then installed genekolar's newest cyanogenmod [unofficial]. Tried installing 2 times with different downloads, wiping everything both times but I get no service or battery status. I checked my sim card, battery, booted the phone multiple times and checked my APN settings, the phone just doesn't find anything.
I would like to have gingerbread on my phone without installing the official one.
I also tried the MIUI rom but it stuck to the booting screen blasting that welcome jingle full volume every 3 seconds.
Any solutions?
Thanks!
This has been written for 1000000 times. You must update to official 2.3.5 if you want to use .35 kernel ROMs. If locked bootloader is what scares you then you dont need to worry because blefish already found a way to unlock it (http://forum.xda-developers.com/showthread.php?t=1457490). If you still dont want to update to offcial 2.3.5 then you can use .32 kernel ROMs
Oh, my search-fu wasn't good enough this time. Being noob 'n all. Thank you for informing me! I'll change this to solved and leave it here if anyone else is having the same problem
Thank you!!
Hi peoples!
I’ve recently installed Cyanogenmod on my Samsung galaxy Xcover 2 (GT-S7710). But when I was done installing my phone couldn’t get any data (H/2G/3G) or call and receive calls. Could someone tell me what I did wrong or forgot whilst or after I installed Cyanogenmod? I would like to know because I’ve read other threads where people with a GT-S7710 do have a working network service on their phone with CM. And I also would like to know the solution to this problem because I can’t take a beating .
I apologize for the length of this first post . I just want to be totally complete about what I’ve done and tried so far to get CM to work with network service. I posted all this information to inform you all and so you could stripe a lot of questions off your list for finding the solution. Also I think this thread may be very useful for other Samsung Android users as well.
Kind regards,
Rick Willems
The problem
So the problem is that when I’ve installed CM10.1 or 10.2 or 11 to my GT-S7710, I don’t have any network service anymore. I tried to install CM using the following method: http://blog.arinium.fi/2014/07/howto-fix-samsung-xcover-2-issues-old-android-low-memory-slow-ui/. I installed CWM 6.0.4.6, wiped cache and installed CM10.2. After this it got stuck in a bootloop. Using the advice of this page: http://forum.xda-developers.com/showthread.php?t=2084905 which was to also wipe data/factory reset and wipe dalvik using CWM it worked!! YES!! But **** no service.
Used Files to install
Links I used to download CWM, CM and Gapps come from these pages:
http://forum.xda-developers.com/showthread.php?t=2384015&highlight=no+network, http://forum.xda-developers.com/showthread.php?p=43294839#post43294839,
CWM: http://www.adriadata.net/xda/skomer/
CM: http://www.adriadata.net/xda/skomer/
Gapps: https://itvends.com/gapps/
What I’ve done and tried
I tried to get network service back when I installed CM10.1 and CM11. In both cases I did a full wipe of data/factory reset, cache and dalvik then installed the latest stock rom/firmware 4.1.2 and do the instructions over again form the chosen method. I did notice that my phone does have network service when I have installed the stock rom/firmware downloaded from this link: http://www.mrcrab.net/down-firmware/14362/Samsung-Galaxy-Xcover-2-GT--S7710.html, My device also has got service when CWM 6.0.4.6. is flashed over the stock rom/firmware. Just not when I installed CM. CM10.1 was running more smoothly than CM10.2 and CM11 was running a little less smooth than CM10.2.
Attempt to solve the problem
I’ve brainstormed the following pages to get to the point of giving up .
http://forum.xda-developers.com/showpost.php?p=35600769&postcount=2
http://forum.xda-developers.com/showthread.php?t=1205439
http://forum.xda-developers.com/showthread.php?t=2448246&page=2
http://forum.xda-developers.com/showthread.php?t=1304258
http://android.stackexchange.com/questions/39076/sim-card-failed
http://forum.cyanogenmod.org/topic/63816-network-problem-with-cyanogenmod-101-1218/
http://forum.cyanogenmod.org/topic/85051-no-service-cant-calltextnetwork-after-flashing-cm11-nightly-on-i9305/
The most pages are threads for other devices, but I thought I just read it anyway, maybe I could get some useful information out of it. Some pages talk about CDMA/RUIM that you can find under network setting in settings, but I’ve not been able to find it on my GT-S7710. Other data found in these pages are also not corresponding with my device.
What I did notice and learned was that information in the EFS folder like Imei, Baseband etc. are used to find and recognize the simcard and thus enable data usage and be able to call and receive calls. So I thought why not backup a copy the EFS folder and place it in CM’s EFS folder after install, so I did. I installed stock firmware where my network service works following the same steps I took that I described earlier, backup the EFS folder to sdcard1, install CWM and CM10.1 and tried to copy the backed-up EFS folder to CM root. But no way would it replace the CM EFS folder, CM simply blocks the copied EFS folder from stock rom/firmware.
I am just out of ideas now and am requesting your aid. Please help me .
Got the same problem here,unfortunately no fix yet
Try this:
kadooosh said:
For those trying to install this or another rom and having the no signal(no smallband) problem. This worked for me on 2 xcovers.
Install cmw: http://theunlockr.com/2014/02/27/install-clockworkmod-recovery-samsung-galaxy-xcover-2-gt-s7710/
Root it: http://theunlockr.com/2014/02/27/root-samsung-galaxy-xcover-2-gt-s7710/
Now normally you can install the custom rom now(vanir). If you do you probably get no signal.
Start odin and flash this file : S7710XXAMB6_S7710OXEAMB3-20130713.tar.md5
I found it on this site: http://www.ulozto.cz/xHADj5PD/samsung-7z
If its dead you can pm me and I can send it.
After I flashed this the phone would just go in a bootloop.
Don't be afraid this is normal.
Now install the vanir rom in the cmw recover mode.
After this it should work fine.
Add a microsd card with 2 partitions and install mount2sd and you have a fully working phone with(almost) unlimited space.
I'm using if for an year now and it works great.
Better then most €500 phones which break after 1 fall .
Click to expand...
Click to collapse
With skomer it is definitely a baseband problem. Changing baseband solves the network signal.
ViktorDelta said:
With skomer it is definitely a baseband problem. Changing baseband solves the network signal.
Click to expand...
Click to collapse
because i have the same problem, i installed cm10.2 and everything were fine for a week and then no signal, i tried to install all the available firmwares out there, the closest i got was to find network and 3g i made a successfull call then i shut it off. At the next boot nothing again. My baseband is xxxx. What do i have to do to change baseband? My IMEI is correct.
does anyone have a /modemfs and /efs folder available to try or/and a modem file to flash?
Odin flash
Go to this page https://boycracked.com/2016/09/11/official-samsung-galaxy-xcover-2-gt-s7710-stock-rom/ and download stock rom labeled "oxeamb3". Put your phone on download mode and connect to odin. Flash this rom with it.
After that, flash your clockworkmod and custom rom. Vanir or CM.
If you still lose signal, try with AND2 stock rom. It's been a while since I did this so I don't remember exactly, but I think AND2 had problems with signal and AMB3 didn't.