Database Users

error 155 during update

after reboot and sending the new rom i got this error, the device restart and the update is not applied
any hint?

error 155 during install update HTC Hero
I got the same message 155 during the ROM update for my HTC Hero. It should be a flash issue. The space for install the Image on the flage should be too low. I don't understand this, because the space on my flash (after a hard reset) is 155Mb. The downloaded file is 103Mb. Enough I think.

I have 489 MB free on the card, if a minimum space is needed htc should write it on the read me...I don't think this is the problem (but I'll try with another card tonight)
from HTC support only say to re download and reinstall, I've done this many time on my pc (XP sp3) and a couple of time at work (on Vista)
I'm happy I'm not the only one with this issue , so keep in touch!

confirmed: with empty 8GB sd card, same results
nobody else with this error?

same problem here... but this this worked for me (got it from another thread):
-------------------------------
Install HTC-sync
Connect the phone with the cable with the pc
Select on the dropdown-screen : sync --- THIS IS THE IMPORTANT STEP
Install the firmware update
---------------------------------
Also, note that I formatted the micro sd card before starting the installation.
After I got a successful installation message on the PC, my phone didn't restart. I got out the battery, reinstalled and everything is fine.... installed with the new version.

still doesn't work for me. But i also noticed i've got a problem the syncing my phone with HTC sync. I use HTC sync 2.0.4 and before i tried to update i,ve never used HTC sync before on my android
I mailed HTC and the told me the would have a look at this problem.

i've solved too, is not a problem of htc update software
the first owner of my hero negate that the phone is rooted, but i've found installed an SPL, so I think this cause the problem
i could restore the orginal one, but meantime i'm playing with the last modaco
hope can help

I know for sure my phone isn't rooted. And i have the same problem. I even called the htc helpdesk and the also could not help me. Htc offert me to colect the phone and install the update themselve

c3k said:
i've solved too, is not a problem of htc update software
the first owner of my hero negate that the phone is rooted, but i've found installed an SPL, so I think this cause the problem
i could restore the orginal one, but meantime i'm playing with the last modaco
hope can help
Click to expand...
Click to collapse
how did you restore the hero to the original one? I've been trying to do that for months and I'm getting frustated, would you please help me...

i've never did it (modaco custom rom worked fine form me), I think you can try restoring the original recovery:
download from here and put it in the tools folder of sdk
then launch:
Code:
fastboot boot cm-hero-recovery.img
hope this solve the problem, good luck
source

[Q] hyperdroid - cant dowload apps with market through wifi ?

hey all...
i flashed hyperdroid for about a month ago now, and i really like it. but from the day i flashed the rom there have been one issue; wen i enter the market through wifi, (have only tried through my home router) and click to download an app, it tells me that it has started the download, but then it just stuck there. but if i try the same on 2g/3g everything works perfect.
i have now done a task29 and flashed everything again but i still have this market/wifi issue, does anyone have clue on how to fix this ?

[Q] Weird x5 Model

Hello everyone.
Well I bought the x5 last week and I got a serious problem.
So I rooted my phone and installed the Clockwork Recovery but for some reason I can only use the Clockwork 3.0.0.28 when I try to use the Clockwork 4 It doesn't go to the Recovery menu so here comes the problem. I tried to install multiple ROOM's with the Clockwork 3 just to see which one would work but it seems that none of them works on my phone because it doesn't seem to flash. I did the installation multiple times but when it comes to the Boot it just froze's there and keeps restarting my phone. Does anyone know if this problem can be solved ? I tried to exchange my phone I told them that it was slow sometimes and it didn't work right just to see if they would exchange for another model but they didn't because they didn't find any anomaly of course. Does anyone know if there's any solution for this ?
Thanks in advance.

Deloxic said:
Hello everyone.
Well I bought the x5 last week and I got a serious problem.
So I rooted my phone and installed the Clockwork Recovery but for some reason I can only use the Clockwork 3.0.0.28 when I try to use the Clockwork 4 It doesn't go to the Recovery menu so here comes the problem. I tried to install multiple ROOM's with the Clockwork 3 just to see which one would work but it seems that none of them works on my phone because it doesn't seem to flash. I did the installation multiple times but when it comes to the Boot it just froze's there and keeps restarting my phone. Does anyone know if this problem can be solved ? I tried to exchange my phone I told them that it was slow sometimes and it didn't work right just to see if they would exchange for another model but they didn't because they didn't find any anomaly of course. Does anyone know if there's any solution for this ?
Thanks in advance.
Click to expand...
Click to collapse
Not sure, is it C8800, the C8800 looks identical to the U8800.

It's the U8800

Never mind I found a tweak that might change their mind on giving me another phone. I found out that if you replace the boot.img with the superuser the Cam stays upside down and since we can't configure it he will have to assume that it is an anomaly. Weee xD

[Q] Just flashed my nexus 4 with Paranoid Android and problems ensued

http://forum.xda-developers.com/showthread.php?t=2020336 This is where i got all the zip which i flashed (radio, bootloader, PA ROM, and GApps)
So there are two problems I have noticed after flashing my nexus with paranoid android.
The biggest one is that my phone cannot get any cellular service. The phone just shows No Service, and when i tried to set mobile network manually it told me to insert sim and restart while already having a sim card in the phone. I tried removing and inserting it again to no avail.
The second one is that I can't use my camera, it opens the app for like half a second then it shows "Can't connect to camera" and quit abruptly.
Everything works just fine when I flashed the backup stock ROM, including the mobile data and camera
Are there known solutions to these problems?

wolverine060 said:
http://forum.xda-developers.com/showthread.php?t=2020336 This is where i got all the zip which i flashed (radio, bootloader, PA ROM, and GApps)
So there are two problems I have noticed after flashing my nexus with paranoid android.
The biggest one is that my phone cannot get any cellular service. The phone just shows No Service, and when i tried to set mobile network manually it told me to insert sim and restart while already having a sim card in the phone. I tried removing and inserting it again to no avail.
The second one is that I can't use my camera, it opens the app for like half a second then it shows "Can't connect to camera" and quit abruptly.
Everything works just fine when I flashed the backup stock ROM, including the mobile data and camera
Are there known solutions to these problems?
Click to expand...
Click to collapse
Same here... can't get SIMcard working and camera is indeed showing "Can't connect to camera"
I'm on cwm recovery
using PA3.99 downloaded from http://goo.im/devs/paranoidandroid/roms/mako/pa_mako-3.99-RC2-20130920.zip
and gapps downloaded from http://goo.im/devs/paranoidandroid/roms/gapps/pa_gapps-full-4.3-20131024-signed.zip
I had PA on my (now sold) I9000, I like PA to feel @home on my brand new Nexus 4
so, any hints would be welcome... :fingers-crossed:
[edit]
on TWRP it's working...

[edit]
on TWRP it's working...
Click to expand...
Click to collapse
Oh my god. Did you flash radio and bootloader as well?

[Q] No network service GT-S7710 after installing CM10.1, 10.2 or 11

Hi peoples!
I’ve recently installed Cyanogenmod on my Samsung galaxy Xcover 2 (GT-S7710). But when I was done installing my phone couldn’t get any data (H/2G/3G) or call and receive calls. Could someone tell me what I did wrong or forgot whilst or after I installed Cyanogenmod? I would like to know because I’ve read other threads where people with a GT-S7710 do have a working network service on their phone with CM. And I also would like to know the solution to this problem because I can’t take a beating .
I apologize for the length of this first post . I just want to be totally complete about what I’ve done and tried so far to get CM to work with network service. I posted all this information to inform you all and so you could stripe a lot of questions off your list for finding the solution. Also I think this thread may be very useful for other Samsung Android users as well.
Kind regards,
Rick Willems
The problem
So the problem is that when I’ve installed CM10.1 or 10.2 or 11 to my GT-S7710, I don’t have any network service anymore. I tried to install CM using the following method: http://blog.arinium.fi/2014/07/howto-fix-samsung-xcover-2-issues-old-android-low-memory-slow-ui/. I installed CWM 6.0.4.6, wiped cache and installed CM10.2. After this it got stuck in a bootloop. Using the advice of this page: http://forum.xda-developers.com/showthread.php?t=2084905 which was to also wipe data/factory reset and wipe dalvik using CWM it worked!! YES!! But **** no service.
Used Files to install
Links I used to download CWM, CM and Gapps come from these pages:
http://forum.xda-developers.com/showthread.php?t=2384015&highlight=no+network, http://forum.xda-developers.com/showthread.php?p=43294839#post43294839,
CWM: http://www.adriadata.net/xda/skomer/
CM: http://www.adriadata.net/xda/skomer/
Gapps: https://itvends.com/gapps/
What I’ve done and tried
I tried to get network service back when I installed CM10.1 and CM11. In both cases I did a full wipe of data/factory reset, cache and dalvik then installed the latest stock rom/firmware 4.1.2 and do the instructions over again form the chosen method. I did notice that my phone does have network service when I have installed the stock rom/firmware downloaded from this link: http://www.mrcrab.net/down-firmware/14362/Samsung-Galaxy-Xcover-2-GT--S7710.html, My device also has got service when CWM 6.0.4.6. is flashed over the stock rom/firmware. Just not when I installed CM. CM10.1 was running more smoothly than CM10.2 and CM11 was running a little less smooth than CM10.2.
Attempt to solve the problem
I’ve brainstormed the following pages to get to the point of giving up .
http://forum.xda-developers.com/showpost.php?p=35600769&postcount=2
http://forum.xda-developers.com/showthread.php?t=1205439
http://forum.xda-developers.com/showthread.php?t=2448246&page=2
http://forum.xda-developers.com/showthread.php?t=1304258
http://android.stackexchange.com/questions/39076/sim-card-failed
http://forum.cyanogenmod.org/topic/63816-network-problem-with-cyanogenmod-101-1218/
http://forum.cyanogenmod.org/topic/85051-no-service-cant-calltextnetwork-after-flashing-cm11-nightly-on-i9305/
The most pages are threads for other devices, but I thought I just read it anyway, maybe I could get some useful information out of it. Some pages talk about CDMA/RUIM that you can find under network setting in settings, but I’ve not been able to find it on my GT-S7710. Other data found in these pages are also not corresponding with my device.
What I did notice and learned was that information in the EFS folder like Imei, Baseband etc. are used to find and recognize the simcard and thus enable data usage and be able to call and receive calls. So I thought why not backup a copy the EFS folder and place it in CM’s EFS folder after install, so I did. I installed stock firmware where my network service works following the same steps I took that I described earlier, backup the EFS folder to sdcard1, install CWM and CM10.1 and tried to copy the backed-up EFS folder to CM root. But no way would it replace the CM EFS folder, CM simply blocks the copied EFS folder from stock rom/firmware.
I am just out of ideas now and am requesting your aid. Please help me .

Got the same problem here,unfortunately no fix yet

Try this:
kadooosh said:
For those trying to install this or another rom and having the no signal(no smallband) problem. This worked for me on 2 xcovers.
Install cmw: http://theunlockr.com/2014/02/27/install-clockworkmod-recovery-samsung-galaxy-xcover-2-gt-s7710/
Root it: http://theunlockr.com/2014/02/27/root-samsung-galaxy-xcover-2-gt-s7710/
Now normally you can install the custom rom now(vanir). If you do you probably get no signal.
Start odin and flash this file : S7710XXAMB6_S7710OXEAMB3-20130713.tar.md5
I found it on this site: http://www.ulozto.cz/xHADj5PD/samsung-7z
If its dead you can pm me and I can send it.
After I flashed this the phone would just go in a bootloop.
Don't be afraid this is normal.
Now install the vanir rom in the cmw recover mode.
After this it should work fine.
Add a microsd card with 2 partitions and install mount2sd and you have a fully working phone with(almost) unlimited space.
I'm using if for an year now and it works great.
Better then most €500 phones which break after 1 fall .
Click to expand...
Click to collapse

With skomer it is definitely a baseband problem. Changing baseband solves the network signal.

ViktorDelta said:
With skomer it is definitely a baseband problem. Changing baseband solves the network signal.
Click to expand...
Click to collapse
because i have the same problem, i installed cm10.2 and everything were fine for a week and then no signal, i tried to install all the available firmwares out there, the closest i got was to find network and 3g i made a successfull call then i shut it off. At the next boot nothing again. My baseband is xxxx. What do i have to do to change baseband? My IMEI is correct.
does anyone have a /modemfs and /efs folder available to try or/and a modem file to flash?

Odin flash
Go to this page https://boycracked.com/2016/09/11/official-samsung-galaxy-xcover-2-gt-s7710-stock-rom/ and download stock rom labeled "oxeamb3". Put your phone on download mode and connect to odin. Flash this rom with it.
After that, flash your clockworkmod and custom rom. Vanir or CM.
If you still lose signal, try with AND2 stock rom. It's been a while since I did this so I don't remember exactly, but I think AND2 had problems with signal and AMB3 didn't.