What I did is I rooted by ZTE blade with z4root's permanent root option. Then I installed ROM Manager and downloaded CM7 for ZTE Blade. I selected the CM7 from SD Card and the process started. After somewhile the startup screen appeared and it got stucked up there. Now I think my phone is bricked. Please help me to unbrick it HELP!!!!
Try using a cm7 tpt, it solves the problem. Once u get a tpt image, put it into ur sd card....switch on phone by pressing menu+volume up +power on
Sent from my BLADE using xda app-developers app
NidalPawne said:
What I did is I rooted by ZTE blade with z4root's permanent root option. Then I installed ROM Manager and downloaded CM7 for ZTE Blade. I selected the CM7 from SD Card and the process started. After somewhile the startup screen appeared and it got stucked up there. Now I think my phone is bricked. Please help me to unbrick it HELP!!!!
Click to expand...
Click to collapse
Firstly dont get panicked... Your cell isn't bricked permanently... Ans these quest first...
Where does it gets stuck? Is it at the CyanogenMod Animatiom? Which Rom version? Does FTM shows up (Press Power=Vol down key)?
Related
need assistance ---defy just rebooting and rebooting
i installed the rom amanger premium
after that i installed the 2ndInit from market for android and installed the latest version .....and after that i uncheck the usb debugging and restarted the defy
since then its auto rebooting from logo to black screen and back to logo ....
please help me i am new to this and really pissed off .......
Flash stock sbf using RSD lite.
Sent from my MB525 using Tapatalk
jassi32 said:
need assistance ---defy just rebooting and rebooting
i installed the rom amanger premium
after that i installed the 2ndInit from market for android and installed the latest version .....and after that i uncheck the usb debugging and restarted the defy
since then its auto rebooting from logo to black screen and back to logo ....
please help me i am new to this and really pissed off .......
Click to expand...
Click to collapse
Check if the blue led comes on during boot and press down volume button then check the settings if not you gotta install a another rom I suggest nordic ii with cm7 cant go wrong
Sent from my MB525 using xda premium
Thank you guyszzzzzzzzzzz:d:d:d:d:d:d:d:d
hey guys,my first post here....
i am stuck with the infinite reboot loop from moto logo after i tried the 2ndinit install.my phones just a month old and i can use it now
i can get into the stock recovery menu by pressing -vol while booting,nothing is making any difference there.
if i press the +vol key while booting,it goes into bootloader menu,but it says battery low,cannot program. i had just rooted my phone and was trying to take a nandroid backup when this happened.
please help save my defy :-s
BUMP................
Im not a expert nor its will be t best solution, Recharge your battery on another device.. Next , try first turn on defy with vol press down, when android signal logo appears, its not boot logo..., press up & down at same time, then wipe data.. It will reset your data. Another solution its flash any sbf of your taste with rsd lite. There is a tutorial for defy beginers on stickies & defy wiki , its contain all info you will need
Giuliano
Sent from my MB525 using XDA Premium App
i update to cm 7.1 a month ago and i added my phone number in settings.....
and when flashed the sea15 froyo of my country , the phone number is still there .....any help on how to remove it stock rom or else have flash back cm7.1 to erase it ....
i want help i need to send defy for service repair .....please help .....
and thanks in advance ......
im having the same problem month ago i cant figure it out , after installing 2ndinit and the led turn into blue i reboot my device but it keeps rebooting over and over iv been searching xda fourms for one month now for a solution but all in vain , im stuck with 2.2.2 froyo i can't install CM7 or MS2Ginger , i've heard that i have to install bootmenu or something but im not sure how to !! btw once i click install recovery in 2ndinit it says success but i still can read 2ndinit recovery NOT currently installed and when i try to press uninstall it says there is nothing to do!!
please if some 1 can help me it would be a life saver for me
Closed at OP request
My phone might be bricked. After many failed attempts to flash a custom rom (I really believe there is a hardware problem since I am a flashaholic since 2009), I managed to flash stock recovery (using cwm 6) so that I could go back to bootloader and flash original ZTE rom.
Now, I can boot to stock recovery, but not to the bootloader.
When pressing Vol+ with Power, instead of going to FTM mode, it shows a white screen with ZTE logo and then reboots back to recovery.
Unfortunately, /system is corrupt with no working rom.
Any ideas?
jastonas said:
My phone might be bricked. After many failed attempts to flash a custom rom (I really believe there is a hardware problem since I am a flashaholic since 2009), I managed to flash stock recovery (using cwm 6) so that I could go back to bootloader and flash original ZTE rom.
Now, I can boot to stock recovery, but not to the bootloader.
When pressing Vol+ with Power, instead of going to FTM mode, it shows a white screen with ZTE logo and then reboots back to recovery.
Unfortunately, /system is corrupt with no working rom.
Any ideas?
Click to expand...
Click to collapse
Seriously... I FIXED IT.
But seriously... I was "Fighting" to solve this for 24 hours. The moment I make this post, I do some magic and phone works....
I really did some magic here I think
: o
jastonas said:
Seriously... I FIXED IT.
But seriously... I was "Fighting" to solve this for 24 hours. The moment I make this post, I do some magic and phone works....
I really did some magic here I think
Click to expand...
Click to collapse
What did you do ?
Blazed2 said:
What did you do ?
Click to expand...
Click to collapse
It's a while back to remember exactly but I think my Blade had a hardware problem with it's internal storage. It just worked after doing the steps correctly after a while and then it went back to be replaced....!
What problems are you having?
jastonas said:
It's a while back to remember exactly but I think my Blade had a hardware problem with it's internal storage. It just worked after doing the steps correctly after a while and then it went back to be replaced....!
What problems are you having?
Click to expand...
Click to collapse
Same as you, can't launch into FTM mode, just to stock CMW mode and can't install any ROM.
Blazed2 said:
Same as you, can't launch into FTM mode, just to stock CMW mode and can't install any ROM.
Click to expand...
Click to collapse
What happens when you try to install a ROM?
jastonas said:
What happens when you try to install a ROM?
Click to expand...
Click to collapse
Just can't! It starts unpacking and then aborts with normally error 0 or 7.
Edit: Check thread [Q] ZTE Blade 2 - Bricked ? Or something You are subscribed to this thread if you can, I state there everything.
Thanks for your time
I think I have brick my LG-e615 L5(Dual)
Here's what wrong did I do to reach this situation:
I was happily running a jelly-bean BHEK BHEK rom that I flashed through CWM.
I don't what got into me and I downloaded MIUI ROM for L5 E612 and flashed it.
But before that I took I installed Rom manager ( for making a nandroid backup) which had one more CWM in it. I think it some how made to CWM's and that's where the problem started . I booted from the CWM of the ROM manager, because I couldn't load my earlier one, from the reboot menu and flashed the MIUI Rom .
Now whenever I start my phone it would dispaly the LG LOGO followed by MIUI Logo and It would show the Jelly bean shutting down screen and shut down.
I tried wipe through adb that too didn't helped. I think now I can't even connect adb.
Whenever I connect my phone through USB it would show a charging screen for 3 seconds then LG logo and this goes on forever.
What should I do. Please help. I am really scared . My parents are going to kill me..!!:crying::crying::crying::crying:
rahulraina7 said:
I think I have brick my LG-e615 L5(Dual)
Here's what wrong did I do to reach this situation:
I was happily running a jelly-bean BHEK BHEK rom that I flashed through CWM.
I don't what got into me and I downloaded MIUI ROM for L5 E612 and flashed it.
But before that I took I installed Rom manager ( for making a nandroid backup) which had one more CWM in it. I think it some how made to CWM's and that's where the problem started . I booted from the CWM of the ROM manager, because I couldn't load my earlier one, from the reboot menu and flashed the MIUI Rom .
Now whenever I start my phone it would dispaly the LG LOGO followed by MIUI Logo and It would show the Jelly bean shutting down screen and shut down.
I tried wipe through adb that too didn't helped. I think now I can't even connect adb.
Whenever I connect my phone through USB it would show a charging screen for 3 seconds then LG logo and this goes on forever.
What should I do. Please help. I am really scared . My parents are going to kill me..!!:crying::crying::crying::crying:
Click to expand...
Click to collapse
I cannot go into emergency mode too..
Reply
have you tried the hard reset mode?
Torres00 said:
have you tried the hard reset mode?
Click to expand...
Click to collapse
yes. doesn't work either
You try flashing stock rom on kdz updater?
Sent from my GT-P3100 using xda app-developers app
Volume down and plug usb
Sent from my GT-P3100 using xda app-developers app
Hello !
I am very new on android and my lg g2 is bricked !
I was rooted, and with es explorer, i mad a wrong manipulation and delete this apk (yes I'm stupid...)
/system/framework/framework-res.apk
then, my phone show a lot of problemes message and shut down
I try to make a recovery, so I went on recovery mode (volume down + power)
the recovery started but never ended, the screen was black and the led was showing different coulour, the phone was really warm
after 20 min, I shutted down the phone
what do do now ?
please help me
thank you in advance
Ps: I'm rooted and my computer run on window 7
Use adb push stock Rom zip'
Then go recovery and flash zip
Sent from my LG-D802 using xda app-developers app
I solve my problem !
I solve my problem with this
http://forum.xda-developers.com/showthread.php?t=2432476
thank you
Hi,
As you'll no doubt be able to tell, I'm a noob with custom ROM's. .
I have an LG P999 on Wind Mobile in Canada.
I have:
Rooted the device with SuperOneClick
Installed Super User (The Clockworkmod Version)
Installed Clockwork ROM Manager
Followed Instructions to flash Cyanogenmod 7.
Rebooted.
The phone now hangs as soon as the loading screen appears. The screen with the LG logo and blu-ish shapes.
I have tried Removing the battery and replacing it, then restarting the phone holding PWR and - Volume key.
This appears to run the vanilla recovery with very limited options. No sign of Clockworkmod Manager.
LG Support Tool cannot communicate with the device once it starts trying to update ( or perform update recovery).
I have a copy of Miui G2x 1.8.19, but cannot do anything with it.
Can anyone help me identify where I zigged when I should have zagged?
Thanks in advance.
IridianDesigns said:
Hi,
As you'll no doubt be able to tell, I'm a noob with custom ROM's. .
I have an LG P999 on Wind Mobile in Canada.
I have:
Rooted the device with SuperOneClick
Installed Super User (The Clockworkmod Version)
Installed Clockwork ROM Manager
Followed Instructions to flash Cyanogenmod 7.
Rebooted.
The phone now hangs as soon as the loading screen appears. The screen with the LG logo and blu-ish shapes.
I have tried Removing the battery and replacing it, then restarting the phone holding PWR and - Volume key.
This appears to run the vanilla recovery with very limited options. No sign of Clockworkmod Manager.
LG Support Tool cannot communicate with the device once it starts trying to update ( or perform update recovery).
I have a copy of Miui G2x 1.8.19, but cannot do anything with it.
Can anyone help me identify where I zigged when I should have zagged?
Thanks in advance.
Click to expand...
Click to collapse
Well for starters, you zigged into the wrong forum. This forum is for the LG G2(2013).
http://forum.xda-developers.com/lg-g2x
Is that the device you're looking for?
edit
don't have the time ore energy to explain
Koopa777 said:
Well for starters, you zigged into the wrong forum. This forum is for the LG G2(2013).
http://forum.xda-developers.com/lg-g2x
Is that the device you're looking for?
Click to expand...
Click to collapse
My apologies. I searched lg p999, and this was the forum which returned. Guess I'll keep looking.