Database Users

[Q] Help I think I have bricked my LG E615. Scared. Bootloop

I think I have brick my LG-e615 L5(Dual)
Here's what wrong did I do to reach this situation:
I was happily running a jelly-bean BHEK BHEK rom that I flashed through CWM.
I don't what got into me and I downloaded MIUI ROM for L5 E612 and flashed it.
But before that I took I installed Rom manager ( for making a nandroid backup) which had one more CWM in it. I think it some how made to CWM's and that's where the problem started . I booted from the CWM of the ROM manager, because I couldn't load my earlier one, from the reboot menu and flashed the MIUI Rom .
Now whenever I start my phone it would dispaly the LG LOGO followed by MIUI Logo and It would show the Jelly bean shutting down screen and shut down.
I tried wipe through adb that too didn't helped. I think now I can't even connect adb.
Whenever I connect my phone through USB it would show a charging screen for 3 seconds then LG logo and this goes on forever.
What should I do. Please help. I am really scared . My parents are going to kill me..!!:crying::crying::crying::crying:

rahulraina7 said:
I think I have brick my LG-e615 L5(Dual)
Here's what wrong did I do to reach this situation:
I was happily running a jelly-bean BHEK BHEK rom that I flashed through CWM.
I don't what got into me and I downloaded MIUI ROM for L5 E612 and flashed it.
But before that I took I installed Rom manager ( for making a nandroid backup) which had one more CWM in it. I think it some how made to CWM's and that's where the problem started . I booted from the CWM of the ROM manager, because I couldn't load my earlier one, from the reboot menu and flashed the MIUI Rom .
Now whenever I start my phone it would dispaly the LG LOGO followed by MIUI Logo and It would show the Jelly bean shutting down screen and shut down.
I tried wipe through adb that too didn't helped. I think now I can't even connect adb.
Whenever I connect my phone through USB it would show a charging screen for 3 seconds then LG logo and this goes on forever.
What should I do. Please help. I am really scared . My parents are going to kill me..!!:crying::crying::crying::crying:
Click to expand...
Click to collapse
I cannot go into emergency mode too..

Reply
have you tried the hard reset mode?

Torres00 said:
have you tried the hard reset mode?
Click to expand...
Click to collapse
yes. doesn't work either

You try flashing stock rom on kdz updater?
Sent from my GT-P3100 using xda app-developers app

Volume down and plug usb
Sent from my GT-P3100 using xda app-developers app

[Q] Bricked Phone, need help

Hey all,
I recently was playing with some ROMs with my LG G2, seeing which was the best for me, and along the way, I messed up and now I am stuck in a fastboot screen, with nothing but a little bit of white text on a black background that says "Fastboot mode started, udc_start()". I have no clue what to do, and I really need some guidance. I played around for a bit and now I believe the phone is completely wiped. Can anyone help?

bump, can anyone help? Im dying here.

Hold down power for 15 seconds. Then hold power and volume down till white screen appears. Press power 3 times. Should be in recovery now if you had recovery installed.
Sent from my LG-D802 using Tapatalk

If this does not work you can revert to stock by downloading orginal firmware in .kdz format and flash it with Flashtool

Siinestar said:
Hey all,
I recently was playing with some ROMs with my LG G2, seeing which was the best for me, and along the way, I messed up and now I am stuck in a fastboot screen, with nothing but a little bit of white text on a black background that says "Fastboot mode started, udc_start()". I have no clue what to do, and I really need some guidance. I played around for a bit and now I believe the phone is completely wiped. Can anyone help?
Click to expand...
Click to collapse
help.. i tap something that i forgot in ... may be in "##4433386368# - Developer menu*" or somewhere(Sprint Dialer Codes) now i can't connect to my computer... i'm not allowed to post ... so ....anyone can help me ?

You need to first download the kdz and lg flash utility with drivers.
Install drivers
The factory reset deleting system, cache, internal sd.
Then shutdown your g2.
Start to downloaded mode connecting your g2
Flash kdz & voila... Done
I too bricked my phone before. My flashing stuck at 49%. Recovered using above method, all is well now
This works 1000%. I bet on it. Just remember to wipe the phone completely before flashing. You will return to stock with unrooted status in download mode. U will have your warranty back too
Sent from my LG-D802 using XDA Premium 4 mobile app
Sent from my LG-D802 using XDA Premium 4 mobile app

Boot Certification Verify?

Hi guys, need some help deperately please.
I've got an LG G2 D802 that has received the OTA update to 4.4 and is running fine.
I've since rooted it and i was looking at installing a custom recovery before flashing a new Rom......
I have tried to use Flashify after downloading TWRP recovery through Flashify but after rebooting it comes up with the following in the top left of a black screen;
Error: Boot Certification Verify
810 - secure booting error
860 - cause: boot certification verify
Then the screen goes off, ive left the phone and tried to reboot by just holding down the power button for 10 seconds but on boot i just get the same message then it dissapears and i get a black screen again
Any help or pointers would be great - thanks in advance

Try going to download mode and flash your kdz.
Sent from my LG-D802 using XDA Premium 4 mobile app

bender_007 said:
Try going to download mode and flash your kdz.
Sent from my LG-D802 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Thankyou for the reply - Any chance you could link or give me a quick tutorial on how to do this please?
I've connected the lg g2 up to my pc via usb and held down volume up and power to get into download mode - i get the screen on the lg with 'Firmware Update' on it and a bar with 0% on it and writing that says "DO not unplug the USB connection until the process is complete.
I've located the kdz for my particular device/model and downloaded it on my pc - how do i flash to my phone from here please - simple step by step instructions would be great thanks!

Of course. Please read this thread and if any troubles occure write here
P.S. disable Antivirus before proceeding.

bender_007 said:
Of course. Please read this thread and if any troubles occure write here
P.S. disable Antivirus before proceeding.
Click to expand...
Click to collapse
Thanks ever so much for your help - my phone is back alive but lost its root! But because the lg g2 is so easy to root its no problem!
Thanks again my friend - you are worth your weight in gold - all the best

wolverine73 said:
Thanks ever so much for your help - my phone is back alive but lost its root! But because the lg g2 is so easy to root its no problem!
Thanks again my friend - you are worth your weight in gold - all the best
Click to expand...
Click to collapse
Thank to the thread OP where all the infos are
Sent from my LG-D802 using XDA Premium 4 mobile app

bender_007 said:
Thank to the thread OP where all the infos are
Sent from my LG-D802 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Have done!
Well ive tried to root again using ioroot 25 like i did initially but my phone doesnt like it at all
I get the little green android with the spinning thing on him but it doesnt go any further than that when i run the Windows Batch File - so going to do the whole process again - frustrating to say the least :/

wolverine73 said:
Have done!
Well ive tried to root again using ioroot 25 like i did initially but my phone doesnt like it at all
I get the little green android with the spinning thing on him but it doesnt go any further than that when i run the Windows Batch File - so going to do the whole process again - frustrating to say the least :/
Click to expand...
Click to collapse
If you've just flashed the KDZ, do a factory reset instead of just booting to android. (hold volume down + power until you see the lg logo, release for a moment and continue holding the 2 buttons untill the factory reset appears). If you're on the new base with knock on and the ioroot issues the reboot to recovery command it has the same effect, your data is cleared. You have to retry the rooting process (the second time it should work).

bender_007 said:
If you've just flashed the KDZ, do a factory reset instead of just booting to android. (hold volume down + power until you see the lg logo, release for a moment and continue holding the 2 buttons untill the factory reset appears). If you're on the new base with knock on and the ioroot issues the reboot to recovery command it has the same effect, your data is cleared. You have to retry the rooting process (the second time it should work).
Click to expand...
Click to collapse
I've finally sorted it out now - on the first flash of the kdz my phone pretty much remained the same, it bought it back to life and it wasnt reset at all and i couldnt root it.
On the second flash of the kdz my phone went through the whole set up process again (enter google account, language etc) and i managed to root easily after that.
It's put me off installing a custom recovery now though Ive expereince with the htc one x, dell streak, zte blade ...... all fine but with this im worried about getting a recovery installed incase i mess up again!
I know there is TWRP recovery and Philz recovery available but using flashify was what got me into this mess - do you suggest i use the usb cable and connect to my pc and install a recovery that way?
Side note - ive downloaded TWRP and Phils recoveries but none of them have a Windows Batch File to run hence me using Flashify - ive put the question on both of those threads aswell - where is the BAT command to run?
Thanks for your help

Use autorec m8. First root, second download autorec and click flash. Done
Sent from my LG-D802 using XDA Premium 4 mobile app

i turn on my LG Li-ion and it just keeps saying boot certification verify

Rooted lg g2 not charging,no recovery,no booting

Hello everyone!! I really need your help....I have an LG G2 witch I rooted and flased Cloudy 2.2 a few months back.
Today I wanted to flash the new Cloudy 3.3 . I did the clasic steps, recovery, wipe and flash.
The thing is that I might chose the wrong Aroma because I didnt remember
Now it does not open, neither charge, cant get to recovery mode, prety match nothing.
When you press the power button there is a glimps of the LG logo and then nothing.
Please advice
Thanks in advance

troulen said:
Hello everyone!! I really need your help....I have an LG G2 witch I rooted and flased Cloudy 2.2 a few months back.
Today I wanted to flash the new Cloudy 3.3 . I did the clasic steps, recovery, wipe and flash.
The thing is that I might chose the wrong Aroma because I didnt remember
Now it does not open, neither charge, cant get to recovery mode, prety match nothing.
When you press the power button there is a glimps of the LG logo and then nothing.
Please advice
Thanks in advance
Click to expand...
Click to collapse
Can you access to download mode or fastboot mode? looks like qhsusb is corrupted. If that is the case you could try to follow this video tutorial to fix it. It is kind of the last resourse to fix a brick but it works, be patient I used this metod two days ago, bricked my lg g2 with simply rom v2 and my pc didn't recognized the phone, not even as an unknown device.
https://www.youtube.com/watch?v=E7zbs6of_4I

Does the led notification blinking when you put the charger on?
Sent from my LG-D802 using XDA-Developers mobile app

Thanks
No it doesnt blink.....but I will try the other guys think and see.....thanks for your interest

Please Help My Phone Bricked, showing white lines Due to Autorec

Hey Guys could someone please help me my phone is bricked i was trying to install a custom recovery through autorec hence when i pressed the reboot to recovery option my phone hanged and gone dead i cant see anything in my screen without that freaky whilte lines at the corner of screen i tried everything which i know could please someone here helps me that how i come out of this problem. Real Help will be appreciated. please am waiting for your replies.. i am using LG G2 LS980

please help me my phone is bricked i was trying to install a custom recovery through autorec hence when i pressed the reboot to recovery option my phone hanged and gone dead i cant see anything in my screen without that freaky whilte lines at the corner of screen i tried everything which i know could please someone here helps me that how i come out of this problem. Real Help will be appreciated. please am waiting for your replies.. i am using LG G2 LS980

luckyali4it said:
please help me my phone is bricked i was trying to install a custom recovery through autorec hence when i pressed the reboot to recovery option my phone hanged and gone dead i cant see anything in my screen without that freaky whilte lines at the corner of screen i tried everything which i know could please someone here helps me that how i come out of this problem. Real Help will be appreciated. please am waiting for your replies.. i am using LG G2 LS980
Click to expand...
Click to collapse
Does the download mode still work?
(turn off the smartphone, hold Vol. Up and plug in the usb cable Form PC)
If so, then simply flash the Stock-ROM with the LG-Servicetool.
I think your Downloadmode is bricked too. Right?
does the smartphone start in android and do you have root?
if so, you have to extract the laf.img from your firmware and install it via flash app as recovery.
Your Firmware?:
https://lg-firmwares.com/de/lg-ls980z-firmwares/
KDZ Extractor (WindowsLGFirmwareextract...):
https://forum.xda-developers.com/showthread.php?t=2600575
Watch this Video:
https://m.youtube.com/watch?v=M4s6wrpD2Gk
-> Rename the extracted laf12345.bin to laf.img !
Than the download mode should work again and you can reinstall your Stock-Rom with the LG servicetool and all work fine again.