Hi All
I am very new to the TF101, so please be gentle.
I was running "Revolution" on my TF101 and using pdanet to connect to my ZTE blade phone with no problems, but decided to update to "Liquidsmooth" and all the Apps I had previously used were OK except "Pdanet" which would not connect in any way, the messages on my 101 are
fail to establish VPN connection:java.lang.illegalStateException cannot create interface and
fail to connect Bluetooth Server(err=23)(java.io.IOException:unable to start server discovery
does anyone have any ideas please what is wrong.
Related
Hi everybody!
Since a few days I have my new Qtek S200 with Windows Mobile 5.0. The problem is that I can't connect it to my desk computer. I downloaded the ActiveSync 4.1 from the "Getting started" CD and tryed to connect my Qtek via USB cabel. The computer sees my device and says that is working correctly. The programs from CD are downloaded correctly (I preinstalled them a couple of times). When I start the connection it says that every port is working correctly (included USB) but the device was not detected!. I use Windows XP with 2 Pack, firewall Kerio Personal 4 and antivirus Avast 4.7 Home Edition.
I really don't know what should I do to connect correctly my device.
Please, help me giving some ideas, maybe you had the same problems and you could share with me your experiences!
My best,
Marcin
I found the problem!! It was a firewall that was blocking the connection. After disabling the firewall everythink is functioning without problems!
lucky you.
I disabled everything possible and still my Prophet does not want to connect through the USB cable after the first time.
What drives me crazy is that the first time it works ok and fast.
I recently upgraded to Vista. Prior to the upgrade, I had configured my 8525 to act as a modem and got very nice internet connectivity when tethered to my PC. After I upgraded to Vista, I had to load an update to the usb modem driver, but with that done, I again had no problem connecting to the phone as a modem when tethered. In both cases, I used the "Wireless Modem" program on the phone to allow my PC access to the internet through the phone.
Unfortunately, I could not get my device to sync under Vista. After a bit of research, I discovered that I needed to install the Microsoft update to the Windows Mobile Device Center. I installed the update and everything synced perfectly. However, now I cannot get the phone to work as a modem any more. It appears that my PC cannot communicate with the phone since it says it is attempting to dial, but never gets a response.
All suggestions and help welcome.
TIA,
Ira
Hm, That's akward. Did you update the drivers for the modem?
You can find the update right here : http://forum.xda-developers.com/showthread.php?t=288753
After uprading the drivers, everything worked dandy for me.
Let us know updates
I recently upgraded my laptop from Vista Home Premium to Business and now my M700 (flashed with Bepe's WM6 Rom) will not sync with it. It will connect via bluetooth or USB however upon connection the laptop tries to install a device driver, fails and then gives the message:
"The class installer has denied the request to install or upgrade this device"
I am pretty much without a clue as to how to solve this issue so any help would be appreciated.
Ta.
any ideas... anyone?
i had a problem like this
was my fire wall, had to turn it off
hope this helps
good luck
Hi,
I'm new hereand this is my first post.
I bought me a HTC Touch HD and it had it's original ROM so I wanted to upgrade it. I read the TUT from this site but got an error message when I executed the HSPLWrapper_Blackstone_156Olinex.exe. Then I tried tu update the official Rom from the HTC site (1.56.404.1). This was OK. Then I tried again the Olinex and it seemed ok but it took just a few seconds to complete the update! I did it again and it was exactly the same: Updated within seconds. The only differece is when it boots, the D shows 1.56.00.00 ...
But after this action my laptop which I used to do all these, lost it's internet connection!!! I can receive mails but can't send them and can't connect to any website. I normally use a wifi connection and when I tried the LAN connection it is the same: No internet connection!?!
My modem is working because I can connect to the internet via wifi with my touch HD and my desktop.
I'm sure I didn't change any settings on my laptop. However I installed activesync and Windows Zune. But as soon as I saw that zune was downloading a bunch of **** I decided to uninstall this. The same thing I did with activesync4.5.
Then I started to search the internet but couldn't find anything like this. Then I started rereading all kind of manuals from this forum and then I realised I didn't install de .net software but in Softwar I can see there is .net framework3.5 SPI on my XP SP3 laptop. I'm not shure if that is what is wrong?
I also have to mention that I don't have the official CD's for the Touch HD. So I don't know if you need to install any usb drivers for the device in XP. I got sometimes error messages when connecting the HD with usb to the laptop like unknown usb device or this device can use a faster usb connection (something like that).
I'm so frustrated now! I'm afraid I have to reinstall XP because I can't find out why I lost my internet connection on my laptop?
Is there anybody out there? who can help me with this wierd problem?
Regards,
Carlo
Hello,
a couple of days ago i updated my Galaxy S5 from rooted stock Kitkat (Touchwiz) to Cyanogenmod 12 (nightly 26.01. at the moment, recovery is TWRP).
I know CyanogenMod from using it on my Galaxy S2 already.
unfortunately i keep having some network problems..
At first the phone didn't connect to my Wifi. The Router assigns a fixed ip to the phone's MAC-address. I was able to fix that by configuring the Wifi-conection on the phone to the same IP instead of using DHCP.
Wifi works fine now.
Second: My ES-file-explorer FTP-Server isn't working. It starts well on the phone, but i can't access the IP ftp://192.168.178.xx like i was used to from my windows pc. Also if i ping the ftp://ip-address in the command promt i get a "couldn't find host"-error..
-------------------------------------
Third Problem Fixed!! (Had to re-enable "Allow programs on other systems to control XBMC")
Third: My Yatse XBMC / Kodi remote won't find the Host. it is active in the same network and i can controll it with my girlfriend's stock Galaxy S5, but i can't add the host to my Yatse.. Even if i enter IP and Webserver-Port directly the JSON-RPC check fails..
Any advice?
Thank you very much for your Help!!