I recently upgraded my laptop from Vista Home Premium to Business and now my M700 (flashed with Bepe's WM6 Rom) will not sync with it. It will connect via bluetooth or USB however upon connection the laptop tries to install a device driver, fails and then gives the message:
"The class installer has denied the request to install or upgrade this device"
I am pretty much without a clue as to how to solve this issue so any help would be appreciated.
Ta.
any ideas... anyone?
i had a problem like this
was my fire wall, had to turn it off
hope this helps
good luck
Related
Hi Guys
Lately i'm having this new trouble...upon connecting my device to work laptop it's connecting and while looking for changes it's popping up with following information:
"Synchronization cannot be completed successfully. Reconnect your device and try again. If the problem persists , see the Microsoft ActiveSync Troubleshooter in Microsoft ActiveSync Help on your desktop computer."
After this error popup only 'Explore' button is enabled on my laptop's ActivieSync......
Please help me what I should do now .... I strongly believe that i'll get solution in this forum rather than O2 Customer support.
Awaiting all your expert guidances/suggestions...
Thanks in advance
I also latley get this same problem, I just sync again and its OK, but it never used to do this
Anyone to help me please .................
Hi everybody!
Since a few days I have my new Qtek S200 with Windows Mobile 5.0. The problem is that I can't connect it to my desk computer. I downloaded the ActiveSync 4.1 from the "Getting started" CD and tryed to connect my Qtek via USB cabel. The computer sees my device and says that is working correctly. The programs from CD are downloaded correctly (I preinstalled them a couple of times). When I start the connection it says that every port is working correctly (included USB) but the device was not detected!. I use Windows XP with 2 Pack, firewall Kerio Personal 4 and antivirus Avast 4.7 Home Edition.
I really don't know what should I do to connect correctly my device.
Please, help me giving some ideas, maybe you had the same problems and you could share with me your experiences!
My best,
Marcin
I found the problem!! It was a firewall that was blocking the connection. After disabling the firewall everythink is functioning without problems!
lucky you.
I disabled everything possible and still my Prophet does not want to connect through the USB cable after the first time.
What drives me crazy is that the first time it works ok and fast.
I got the new SPV 5000 as upgrade on orange and the first thing i did was unlock it using the bootloader by BUZZ from this site. Once i unlocked the phone, it works fine, everything is great. But when i try to connect it to the PC, it gives me an error, saying download Active sync 4.1 for it, I downloaded the latest 4.2 and tried to connect my universal to it, but it isnt able to connect, i dont know why..
sometimes it just gives me an error and says, check/report error and does all the status reports and stuff, but still not luck. I connected once and then when i clicked the explore button everything was blank, cant see my device or folders and nothing at all.
Please help me if someone knows the solution to it.. Cheers
Do you have another PC with which to try it out? Maybe the activesync installation or the USB drivers got corrupt.
Also, try syncing thru Bluetooth if your PC has BT. This might isolate the problem.
hello Jorgee, thanks for the reply, Yes it did work on the other PC, so does it mean that my current Pc's USB drivers are corrupt, coz the other day my USB TV stopped working on this one too. hehehe.. any solution to this PC problem
cheers mate
I find that if I'm connected to work using the Cisco VPN Client then ActiveSync won't connect, not really a big deal I guess but annoying all the same!
I have been trying to sincronize my S200 Qtek but it is impossible. I have made several hard and soft resets and tried with three different computers. I have installed 4.1, 4.2 and 4.5 beta versions of ActiveSync, but it is always the same: ActiveSync seems to turn on but no sincronization initialize when I connect my S200 to the USB port.
I have also made a format and reinstall windows XP but I can't syncronize information... please help me!
I have also tried to install "USB killer" without success...
Did you disable Win XP firewall? You have to disable it or any other firewall that may be installed.
If that solves your problem search MS site for how to authorise ActiveSync for your firewall.
Yes, in fact when I reinstalled windows I didn't install Norton because of the firewall. I have also unactivated windows firewall... but no sincronization occurrs
Maybe you could try another USB Cable? Or try to sync using Bluetooth?
Can't sync my S200 either...
Don't think it's cable because it is brand new :'(
Have you tried to upgrade to the latest activesync right after the installation of windows? (found here)
And perhaps some overactive antivirus programs can bug up syncing too sometimes. Did the installation of new hardware go well after you plug in your device?
When you plug in, did nothing happen or was there a small screen saying it was getting information from the phone? If yes, were you able to setup a connection (guest etc) and after that it didn't want to sync?
Got this issue resolved the fault was some tweaking I did... See, I use fixed IP with my router so I disabled the DHCP client service on services.msc... So activesync could't get the right adress from the prophet... Still don't know how I manage to make that assumption about this problem, but gladly I did
Hope this help other people with similar problem...
Same issue
tonimacaya said:
I have been trying to sincronize my S200 Qtek but it is impossible. I have made several hard and soft resets and tried with three different computers. I have installed 4.1, 4.2 and 4.5 beta versions of ActiveSync, but it is always the same: ActiveSync seems to turn on but no sincronization initialize when I connect my S200 to the USB port.
I have also made a format and reinstall windows XP but I can't syncronize information... please help me!
I have also tried to install "USB killer" without success...
Click to expand...
Click to collapse
Did you manage to fix your USB problem?
I need some support with the same problem.
Regards,
h
Hi,
I'm new hereand this is my first post.
I bought me a HTC Touch HD and it had it's original ROM so I wanted to upgrade it. I read the TUT from this site but got an error message when I executed the HSPLWrapper_Blackstone_156Olinex.exe. Then I tried tu update the official Rom from the HTC site (1.56.404.1). This was OK. Then I tried again the Olinex and it seemed ok but it took just a few seconds to complete the update! I did it again and it was exactly the same: Updated within seconds. The only differece is when it boots, the D shows 1.56.00.00 ...
But after this action my laptop which I used to do all these, lost it's internet connection!!! I can receive mails but can't send them and can't connect to any website. I normally use a wifi connection and when I tried the LAN connection it is the same: No internet connection!?!
My modem is working because I can connect to the internet via wifi with my touch HD and my desktop.
I'm sure I didn't change any settings on my laptop. However I installed activesync and Windows Zune. But as soon as I saw that zune was downloading a bunch of **** I decided to uninstall this. The same thing I did with activesync4.5.
Then I started to search the internet but couldn't find anything like this. Then I started rereading all kind of manuals from this forum and then I realised I didn't install de .net software but in Softwar I can see there is .net framework3.5 SPI on my XP SP3 laptop. I'm not shure if that is what is wrong?
I also have to mention that I don't have the official CD's for the Touch HD. So I don't know if you need to install any usb drivers for the device in XP. I got sometimes error messages when connecting the HD with usb to the laptop like unknown usb device or this device can use a faster usb connection (something like that).
I'm so frustrated now! I'm afraid I have to reinstall XP because I can't find out why I lost my internet connection on my laptop?
Is there anybody out there? who can help me with this wierd problem?
Regards,
Carlo