Hi, All
I have a VPN problem that is strange. Here goes:
I have my Nexus One two days ago. It's not rooted and no APK installed on it.
At that time, the VPN worked very well.
Then, I unlocked and rooted it. Then I flashed a Pandora Firmaware. The firmware is here.
://d.epis.me/Pandora%20N%201.1%20for%20nexus.zip
After that, the VPN didn't work. I must wait for a long time after I started to connect, and an error message came out like this: "Can not connect to the server". If I use a wrong password, the VPN will tell me the pssword is wrong. The same VPN server can be connected by same username and password on my laptop, but not Nexus One. It is very strange.
Then I restored the original shipping firmware. It didn't work too. The reply of the VPN is the same as above.
The server is uk.focusvpn.com, and VPN type is PTPP. Encryption type I selected encryped and not encrypted, it didn't work on both.
Now the VPN on my Nexus One is totally broken. Can any good guy help me?
apango said:
Hi, All
I have a VPN problem that is strange. Here goes:
I have my Nexus One two days ago. It's not rooted and no APK installed on it.
At that time, the VPN worked very well.
Then, I unlocked and rooted it. Then I flashed a Pandora Firmaware. The firmware is here.
://d.epis.me/Pandora%20N%201.1%20for%20nexus.zip
After that, the VPN didn't work. I must wait for a long time after I started to connect, and an error message came out like this: "Can not connect to the server". If I use a wrong password, the VPN will tell me the pssword is wrong. The same VPN server can be connected by same username and password on my laptop, but not Nexus One. It is very strange.
Then I restored the original shipping firmware. It didn't work too. The reply of the VPN is the same as above.
The server is uk.focusvpn.com, and VPN type is PTPP. Encryption type I selected encryped and not encrypted, it didn't work on both.
Now the VPN on my Nexus One is totally broken. Can any good guy help me?
Click to expand...
Click to collapse
oh well on focusvpn, u just need uncheck enable encryption , and save , reboot then it will work. if it still not work, u can try type 8.8.8.8 for dns address on vpn setting section..
i just noticed android doesn't support mppe encryption 2 days ago, so if there is any vpn need ppptd+mppe vertify then i won't work. that's all. u can try to diag by using ddms
Thank u very much. I just find the reason as you said. So I have no way to solve it unless google let android support it.
Are you looking to connect ?????
Are you looking to connect to your corporation or institution's VPN connection on your Google Nexus One mobile phone?
Hi,
Is there any way to enable or hack in the advanced IPSEC VPN option on stock firmware for S2? I really need to be able to define Aggressive mode VPN in order to connect to PFSense but... even 2.3.4 Sammy firmware does not have it.
Also, did anyone ever manage to get OpenVPN running with stock 2.3.4 FW? I could never get it to work. Rooting, installation (via OpenVPN Installer) goes fine, then even connection can be established but routes to remote networks are not propagated.
Thanks!
hello friends
today i m showing you a 100 percent working wpa_supplicant for galaxy s2 gingerbread rom for ad hoc network. yes it is test by me and also this is modified by me too. no one is responcible and cant take credit for developing it. currently i m using and testing on litening rom 6.1 and it works flawlessly. so no more wait for new wpa supplicant. becoz wait is over now. use it and reply me about ny bugs. i will try to revamp it. bye
download attachment and use it
if u like my work then plz donate me on my paypal account
[email protected]
and plz reply thanks
This is great!!! Tested on my galaxy SGS1 and works perfectly!
Thanks!!!
Edit: i can connect only if i set my ad-hoc network unproteced. If i add wpa2 or even wep security the phone gets stuck on "Obtaining IP address...", but it could be my ubuntu notebook.
Awsome sauce!!! Been waiting for this. Downloading and testing it now on my SG1.
Thanks
edit: just realised it is not a CWM flashable zip. Where do I put this?
edit2: figured out where to put it so dont worry. Cannot obtain IP address though on an unsecured ADHOC network.
what is this ?
It alows your phone to use your laptop/desktops internet connection. Create an ad-hoc wireless network on your laptop/desktop and then search for that network on your phone connect and voila your phone should now use the interent through your laptop/desktop.
I like it cos it means I can use my internet connection at work instead of 3g.
SGS2 on lite'ning v4.2 (2.3.4)
Open: 'obtaining IP' loop
WEP: 'obtaining IP' loop
WPA: [no connection]
it is not cwm file. first u have to unzip it then copy and paste this on system/bin folder on ur rooted gs1 and gs2.but this will work perfectly on gingerbread 2.3.4
hi haymzee
you should use litening rom ver 6.1 not 4.2 otherwise it will not work correctly.so first update ur rom in 6.1 and then use this wpa file ok
OH YES! will test and report; long awaited!
I can connect in the morning but after turn airplane mode on-off, then I can't connect till now.
It shows obtaining IP address, even I try to re-boot both phone. T_T
Hello everyone,
I finally managed to solve the problem of connections
thanks
hi to everybody,
thank you for your work!!!!!!! is perfect!!!!
hi,
i'm running LeoMar75 Revolution 2.6, and this wpa_ did not pass obtainig ip loop.
neither wit unprotected or wep protected adhoc network
guidox79 said:
Hello everyone,
I finally managed to solve the problem of connections
thanks
Click to expand...
Click to collapse
Hello, how did you manage to solve the looping 'Obtaining IP address.." problem ?
Also got the same problem of Obtaining IP address. I tried many configurations of changing the ip address manually with static ip address settings
Its working perfectly on our rom.
10 char will b built in in the next release
For all noobs:
Use root explorer
Unzip and put the file in system/bin
Reboot
Done.
Now test
Sent from my GT-I9100 using XDA App
I use LogMeIn.apk
any solution for GB 2.3.5 ???
I've tried ad hoc on 4 different laptops and it only worked on the newer ones
I can confirm this works 100%. I tethered the internet connection on my Macbook Air with the phone using AdHoc Wifi successfully.
Hello.
I recently updated my Galaxy S4 I-9505 from 4.2.2 to Kitkat thru Kies. I have a VPN subscription with Boxpn.com. Before updating to 4.4.2 the VPN used to work flawlessly. But after the update the VPN connects but no bytes get transferred. I cannot browse at all. I have tried stock browser, Chrome and Firefox. I've checked the settings. They are same as before when it was working on 4.2.2. I have tried different servers provided by BoxPN but all f them end up in getting connected but no browsing takes place.
I'm banging my head here guyz any help would be deeply appreciated.
Thanks.
Try entering your dns manually.
Or you can use the dns of opendns or google
google = 8.8.8.8
Forgot to mention. I have tried 3 DNS. Mine(Dubai), BoxPN DNS and Google DNS. But still the same.
Gets connected, Doesnt browse. Even performed a factory reset ( VPN is that important to me) but still no use
Any result ?
Tapnięte z mojego S Advance ☺
Hello, everybody,
I've been trying to control my home ftp via mobile phone for ages. For this I use Andftp on my Galaxy S8. Via filezilla from any other PC everything works perfectly. Only on the mobile phone (both over 4G and WLAN) it wont work. Settings are identical and I can successfully connect to the server. Unfortunately the directory is not displayed. Filezilla Server ends with the log: 425 Can't open data connection for transfer of "... Does anyone of you experienced this or can help me?
Thank you
St.eVe