Hi, All
I have a VPN connection problem that is strange. Here goes:
I have my Nexus One two days ago. It's not rooted and no APK installed on it.
At that time, the VPN worked very well.
Then, I unlocked and rooted it. Then I loaded the Modaco ROM.
http://android.modaco.com/content/g...odaco-com/299300/08-01-1-1-modaco-custom-rom/
After that, the VPN didn't work. I must wait for a long time after I started to connect, and an error message came out like this: "Can not connect to the server". If I use a wrong password, the VPN will tell me the pssword is wrong. The same VPN server can be connected by same username and password on my laptop, but not Nexus One. It is very strange.
Then I restored the original shipping firmware. It didn't work too. The reply of the VPN is the same as above.
Encryption type I selected encryped and not encrypted, it didn't work on both.
Now the VPN on my Nexus One is totally broken. Can any one help me?
I have the same issue on the latest Cyanogen ROM. (5.0.4.1)
hi
vpn can be connected in revolution 6.1.4 but i can not get into any site....
what's the problem????
It could be a dns related problem, as a start try to connect remote site using ip address. Btw. are you using your phone's vpn client or something else?
jms-xda said:
It could be a dns related problem, as a start try to connect remote site using ip address. Btw. are you using your phone's vpn client or something else?
Click to expand...
Click to collapse
I made a L2TP Connection which i use for my pc without any problem....
hello
I havent received any answer yet.....
VPN on Android 2.3.5 ARDH 6.1.5
I managed to get PPTP working on my android phone running 2.2
I used the stock VPN settings screen to do this.
1. Settings->Wireless and Network-> VPN Settings.
2. Add VPN
3. Add PPTP VPN
4. VPN Name - whatever
5. Set VPN server: (or whichever server you want to use)
6. Enable Encryption: UnCheck
Then save and you'll be brought back to the VPN settings screen. Select the newly created VPN entry, and you'll be prompted for your username and password. Be careful about typing your password in, its difficult with the onscreen keyboard.
Mine connects after that.
L2TP doesn't work for me though.
K73
ARHD 6.1.5
bmojtaba said:
hi
vpn can be connected in revolution 6.1.4 but i can not get into any site....
what's the problem????
Click to expand...
Click to collapse
Try ARHD 6.1.5 , maybe more luck...
http://forum.xda-developers.com/showthread.php?t=840040
Hello,
a couple of days ago i updated my Galaxy S5 from rooted stock Kitkat (Touchwiz) to Cyanogenmod 12 (nightly 26.01. at the moment, recovery is TWRP).
I know CyanogenMod from using it on my Galaxy S2 already.
unfortunately i keep having some network problems..
At first the phone didn't connect to my Wifi. The Router assigns a fixed ip to the phone's MAC-address. I was able to fix that by configuring the Wifi-conection on the phone to the same IP instead of using DHCP.
Wifi works fine now.
Second: My ES-file-explorer FTP-Server isn't working. It starts well on the phone, but i can't access the IP ftp://192.168.178.xx like i was used to from my windows pc. Also if i ping the ftp://ip-address in the command promt i get a "couldn't find host"-error..
-------------------------------------
Third Problem Fixed!! (Had to re-enable "Allow programs on other systems to control XBMC")
Third: My Yatse XBMC / Kodi remote won't find the Host. it is active in the same network and i can controll it with my girlfriend's stock Galaxy S5, but i can't add the host to my Yatse.. Even if i enter IP and Webserver-Port directly the JSON-RPC check fails..
Any advice?
Thank you very much for your Help!!
hello all!
i managed to do do the rooting thing by myself (thats what i think) and i just need u guys to tell me if i did right
1- i followed this guide : https://forum.xda-developers.com/shield-tv/development/how-to-root-android-pie-8-0-1-nvidia-t3982709
2- my shield is now showing that error message at the start telling its unlocked,
3- i have now magisk and twrp installed and i can see the root directory.
Now to the things that i need to understand here is what do i need the rooted image from nvidia for? and why cant i access the root from ftp ? only my usb drive and sd card is showing but root not accessed from ftp.
MY android is: 8.1
Thanx in advance for all help.
2- it's not an error, but a warning.
Don't worry about it
The development image from nvidia is running a developer build of android which is prerooted and in theory su's like magisk should be easier to install.
The stock ota/recovery images comes with more protection which makes them harder to root and to do changes to the system, but thanks to people like @rootfan it's pretty much painless.
Are you sure it's ftp and not smb?
Smb just shows the internal and external drives.
If you are using an ftp server app on the shield you need to setup the paths yourself within that app.
Thanx for clearifying this, so in my case i dont need any image cuz i alredy done it i guess.
I tried to set up the ftp server to point to the root directory in my nvidia shield but i could not find any app that can point the root. All apps seems old.
How do you guys fix this?
I'm using servers ultimate.
I also think the app just called ftp server can do it.
Solid explorer might also be able to.
Atleast in servers ultimate I have to manually type in the path which is just "/" that should bring you to the root folder.
I use server ftp and server ultimate. The first one works flowless but no root. The second one that you said have root access but i cant connect to the server for unkbown reason. Could be the port
mLgz0rn said:
I'm using servers ultimate.
I also think the app just called ftp server can do it.
Solid explorer might also be able to.
Atleast in servers ultimate I have to manually type in the path which is just "/" that should bring you to the root folder.
Click to expand...
Click to collapse
I tried that ultimate one and it says its runing but i cant connect to it from pc. My unrooted ftp server app works without problems. Any other apps out there that i can try?
Edit: after testing few things i managed to run ftp from browser bytyping ftp:// my external ip : port
But this doesnt work from an ftp client from my pc at the same netwrok. Even if i give the box internal ip.
aricemax said:
I tried that ultimate one and it says its runing but i cant connect to it from pc. My unrooted ftp server app works without problems. Any other apps out there that i can try?
Edit: after testing few things i managed to run ftp from browser bytyping ftp:// my external ip : port
But this doesnt work from an ftp client from my pc at the same netwrok. Even if i give the box internal ip.
Click to expand...
Click to collapse
Which one of the ftp servers within servers ultimate are you running?
I can only get "ftp server" to work and not the native one.
mLgz0rn said:
Which one of the ftp servers within servers ultimate are you running?
I can only get "ftp server" to work and not the native one.
Click to expand...
Click to collapse
i found the problem, it was network problem, not ftp server, all worked fine, when i changed to another ftp client (total commander) instade of (winscp) it worked, i guess its has something to do with passive or active mod in the connection. now when i connect from pc i can run ftp root ( / ). thanks alot for helping me out.
i know its not so big thing rooting the shield cuz these days u can allmost do anything by sideloading apps or games but do you guys have any tips what do to with rooted box that cant be done with sideloading?
As in beta, you still can't connect to Wi-Fi in official Oxygen OS 10. Network reset did not help
OP 6T has no IP address.
Anyone have any ideas?
..
I had a Bet 10 v.17 phone also had no Wi-Fi connection.
After returning to Android 9, IP appeared again and there were no connection problems.
This is not an issue with Oxygen OS 10. It is a feature of Android 10 called mac randomize. Your mac will be changed randomly when you connect to wifi network. This is for security purpose. If you enabled mac filter in your router then while connecting to your wifi network in your mobile go to advanced options choose Use device mac under the privacy option.
Note: after you upgrade to Android 10 you device mac will be changed. Don't forget to updated your new mac in you router mac filter settings.
Azar_k said:
This is not an issue with Oxygen OS 10. It is a feature of Android 10 called mac randomize. Your mac will be changed randomly when you connect to wifi network. This is for security purpose. If you enabled mac filter in your router then while connecting to your wifi network in your mobile go to advanced options choose Use device mac under the privacy option.
Note: after you upgrade to Android 10 you device mac will be changed. Don't forget to updated your new mac in you router mac filter settings.
Click to expand...
Click to collapse
I have turned off all filters on the router.
I changed to MAC of device, to randomized MAC. Nothing new.
Still can't connect to Wi-Fi.
This is insane! New system and connection problems?
Instead of getting better, it's getting worse.
Bluetooth issues on my phone
I can't even enable wifi connection
Reflash the official update zip....worked for me
I have exactly the same issue.
After upgrading to Oxygen OS 10.0 on my OnePlus 6, connecting to my router with a password became impossible.
The only option is to connect via a guest connection, without a password (hardly a viable option).
All other devices connect properly.
Setting the MAC address to "device MAC" rather than "random MAC" does not solve the problem.
Resetting the phone's wireless settings does not solve the problem.
Factory resetting the smartphone (the only solution suggested by OnePlus support) has not solved the problem.
Resetting the router (Netgear Nighthawk RAX40) has not solved the problem.
SOLUTION !!!
justforkix said:
I have exactly the same issue.
After upgrading to Oxygen OS 10.0 on my OnePlus 6, connecting to my router with a password became impossible.
The only option is to connect via a guest connection, without a password (hardly a viable option).
All other devices connect properly.
Setting the MAC address to "device MAC" rather than "random MAC" does not solve the problem.
Resetting the phone's wireless settings does not solve the problem.
Factory resetting the smartphone (the only solution suggested by OnePlus support) has not solved the problem.
Resetting the router (Netgear Nighthawk RAX40) has not solved the problem.
Click to expand...
Click to collapse
I FOUND A SOLUTION !!!
The router had previous security: WPA2 (very secure).
Android 9 in OP 6T worked with them, but not Android 10.
I have reduced security to: WPA / WPA2 (secure).
Currently, Android 10 connects to a Wi-Fi network without a problem.
You should write the patch in Android 10.
Does this mean that everyone under Oxygen OS 10 should downgrade their Wi-Fi security in order to connect with it?
Is your OnePlus font italic?
Have you used Magisk Canary?
justforkix said:
Does this mean that everyone under Oxygen OS 10 should downgrade their Wi-Fi security in order to connect with it?
Click to expand...
Click to collapse
Haven't yet tried, but it seems to be a solution.. I couldn't understand, WHY it works with all other WiFis and doesn't work with my, but WPA2 looks like answer.
Has somebody reported this bug to OP?
drozel said:
Haven't yet tried, but it seems to be a solution.. I couldn't understand, WHY it works with all other WiFis and doesn't work with my, but WPA2 looks like answer.
Has somebody reported this bug to OP?
Click to expand...
Click to collapse
Until yesterday, were I messed up with root/magisk, everything (including WPA2) was working well for me.
Now I can'T turn on WIFI anymore.
WPA/WPA2 helped for me... OP can't connect to only-WPA2 networks after Android 10 update.
Installed via OxygenUpdater, no root, no unlocked bootloader, full stock
Alex_H_H said:
I FOUND A SOLUTION !!!
The router had previous security: WPA2 (very secure).
Android 9 in OP 6T worked with them, but not Android 10.
I have reduced security to: WPA / WPA2 (secure).
Click to expand...
Click to collapse
many, many thanks!
I can still connect to my existing network, I just had to update my MAC filters.
I really advise against using WPA at all - see if there is firmware update for your router.
Are you using Magisk Canary?
Roll back to Stable and reinstall oos
firegate22 said:
Until yesterday, were I messed up with root/magisk, everything (including WPA2) was working well for me.
Now I can'T turn on WIFI anymore.
Click to expand...
Click to collapse
I had the same issue, flashing a custom kernal (Omega) fixed the problem. Why ? Idk
change private DNS to automatic
changing my DNS from cloudflare to automatic helped me (after also switching to device MAC)
dbarrett480 said:
Reflash the official update zip....worked for me
Click to expand...
Click to collapse
Did you flash the full zip or incremental? From TWRP? Is any wipe necessary after flashing?