Related
How to Flash Android 4.0.4 Firmware for Galaxy Note GT N7000
This Tutorial is Divided into 4 Parts:
1) People who are running Gingerbread who are not affected by the eMMC bug
2) People who are running IceCreamSandwich who dont have the eMMC bug
3) People who are running IceCreamSandwich who have the eMMC bug
4) People who are Running Gingerbread/Icecreamsandwich and have the Android 4.0.4 released for their region.(Currently Only Germany, Malasia, Singapore and South Africa)
Please Find Your Respective Section in the tutorial below!
For Current Gingerbread Users
Since Gingerbread is safe from the eMMC superbrick bug, you can directly go ahead and do a complete factory reset/wipe and clear cashe either from settings>privacy>factory reset OR via stock recovery. After the factory reset/wipe, you need to download the "zip" file from here: http://www.hotfile.com/dl/162875101/447fb8f/N7000XXLRG_N7000DBTLRG_DBT.zip.html
After the download is complete, open the zip file using WINRAR and you will see two files:
• A “.md5” file
• A “.dll” file
Unextract both to folder/desktop. Now you need to download ODIN and samsung drivers if you do not have them. For ODIN just download from here: https://www.dropbox.com/s/09glpz0zg7c2dpo/Odin3 v1.83.exe
For drivers just download & install the samsung kies from here:
http://www.samsungapps.com/about/onPc.as
After installing Kies you will have the drivers installed.(you may need restart for drivers to work) Then you will need to put your phone in download mode(Volume Down + Home + Power Button) and then press volume up to continue to enter the download mode. Then connect your Galaxy Note to PC using MicroUSB cable and open ODIN. In ODIN make sure that the box has turned yellow for this to work. If it does not then there is problem with the drives. You then need to select the PDA button and navigate to the ".md5" file that you unextracted and select it. Make sure only "Auto Reboot" & "F. Reset Time" are checked and then you can hit the start button. It should then start flashing. After flashing is done a box should turn green and the phone will automatically reboot. Flashing usually takes upto 10-15 mins.
For Current IceCreamSandwich(4.0.3) Users who DON’T have eMMC brickbug
First please check whether your device has the eMMC brick bug via chainfires app called “GotBrick?” If your device does not have the brick bug then simply factory reset it via settings and then you can download the Android download the "zip" file from here: http://www.hotfile.com/dl/162875101/447fb8f/N7000XXLRG_N7000DBTLRG_DBT.zip.html
After the download is complete, open the zip file using WINRAR and you will see two files:
• A “.md5” file
• A “.dll” file
Unextract both to folder/desktop. Now you need to download ODIN and samsung drivers if you do not have them. For ODIN just download from here: https://www.dropbox.com/s/09glpz0zg7c2dpo/Odin3 v1.83.exe
For drivers just download & install the samsung kies from here:
http://www.samsungapps.com/about/onPc.as
After installing Kies you will have the drivers installed.(you may need restart for drivers to work) Then you will need to put your phone in download mode(Volume Down + Home + Power Button) and then press volume up to continue to enter the download mode. Then connect your Galaxy Note to PC using MicroUSB cable and open ODIN. In ODIN make sure that the box has turned yellow for this to work. If it does not then there is problem with the drives. You then need to select the PDA button and navigate to the ".md5" file that you unextracted and select it. Make sure only "Auto Reboot" & "F. Reset Time" are checked and then you can hit the start button. It should then start flashing. After flashing is done a box should turn green and the phone will automatically reboot. Flashing usually takes upto 10-15 mins.
For Current IceCreamSandwich(4.0.3) Users who have eMMC brickbug
First please check whether your device has the eMMC brick bug via chainfires app called “GotBrick?” If your device has the brick bug then you cannot do a factory reset and directly install the new 4.0.4 firmware. You will first need to downgrade to a Gingerbread Firmware, then do a complete factory reset/wipe and clear cashe and then reflash the Android 4.0.4 firmware. So the first thing you need to do is download the Gingerbread Firmware from here: http://www.sammobile.com/firmware/?page=3&t=1&o=1&m=GT-N7000&r=1#regiona
(You will need to signup to download)
For Samsung Kies with drivers:
http://www.samsungapps.com/about/onPc.as
For ODIN:
https://www.dropbox.com/s/09glpz0zg7c2dpo/Odin3 v1.83.exe
After you have downloaded the zip file, unextract it and then flash the “.md5” in the PDA section of ODIN.
After flash you will have Gingerbread. In Gingerbread you have to do a wipe & clear cashe from the stock recovery(Volume Up + Home Button + Power Button). After the wipe, you need to download the Android 4.0.4 Firmware from here:
http://www.hotfile.com/dl/162875101/447fb8f/N7000XXLRG_N7000DBTLRG_DBT.zip.html
After the download is complete, open the zip file using WINRAR and you will see two files:
• A “.md5” file
• A “.dll” file
Unextract both to folder/desktop. Now you need to download ODIN and samsung drivers if you do not have them. For ODIN just download from here: https://www.dropbox.com/s/09glpz0zg7c2dpo/Odin3 v1.83.exe
For drivers just download & install the samsung kies from here:
http://www.samsungapps.com/about/onPc.as
After installing Kies you will have the drivers installed.(you may need restart for drivers to work) Then you will need to put your phone in download mode(Volume Down + Home + Power Button) and then press volume up to continue to enter the download mode. Then connect your Galaxy Note to PC using MicroUSB cable and open ODIN. In ODIN make sure that the box has turned yellow for this to work. If it does not then there is problem with the drives. You then need to select the PDA button and navigate to the ".md5" file that you unextracted and select it. Make sure only "Auto Reboot" & "F. Reset Time" are checked and then you can hit the start button. It should then start flashing. After flashing is done a box should turn green and the phone will automatically reboot. Flashing usually takes upto 10-15 mins.
People who are Running Gingerbread/Icecreamsandwich and have the Android 4.0.4 released for their region
For all users who have the Android 4.0.4 Firmware update released for their region (14/07/12 - Germany, Singapore and Malasia) can also use OTA , via Samsung Kies to update their phones. Just go into the settings>About Phone>Software Update to check for the update OR another method is to connect your Galaxy Note to the PC. Open Samsung Kies and check for the firmware update. If the update is available it should automatically ask you if you want to update. Confirm the update and it will do the flash automaticly and keep all your data as well.
For Samsung Kies:
http://www.samsungapps.com/about/onPc.as
Why wipe at all when upgrading form stock f/w?
I updated my Note from 2.3.6 to 4.0.3 (to speedmod K3-7 via CWM) to 4.0.4 all without a single wipe. Didn't experience any problems.
Randomwalker said:
Why wipe at all when upgrading form stock f/w?
I updated my Note from 2.3.6 to 4.0.3 (to speedmod K3-7 via CWM) to 4.0.4 all without a single wipe. Didn't experience any problems.
Click to expand...
Click to collapse
recomended by senior XDA members + a lot of apps kept crashing when i upgraded without wipe!
Very good initiative from you as I'm sure many NEW users will find it useful! Maybe you could also add the definition of the EMMC bug on the 1st line to explain it to them.
Hey
I flashed my phone with this : http://forum.xda-developers.com/showthread.php?p=28553042#post28553042
Does i still fall unedr third category, and do i have to do all step mentioned there. And does after flahing official ICS willl i have like touchwiz and snote premium suite preinstaled?
hey guys, i have a youtube tutorial on the same that i made yesterday but im trying to embedd it in the post but am unable to do so, anyone can help out on how to embedd the video in the original post?
endingcolt007 said:
recomended by senior XDA members + a lot of apps kept crashing when i upgraded without wipe!
Click to expand...
Click to collapse
Strange. Did you try fixing permissions?
Latvianization said:
I flashed my phone with this : http://forum.xda-developers.com/showthread.php?p=28553042#post28553042
Does i still fall unedr third category, and do i have to do all step mentioned there. And does after flahing official ICS willl i have like touchwiz and snote premium suite preinstaled?
Click to expand...
Click to collapse
hey man from the post there i see that you have the cm9 kernel installed over the stock Gingerbread ROM(Correct me if im wrong)!
So as far as i know you will fall under the first category because the eMMC_ERASE function has been disabled in the cm9 knightlies kernel. But just download chainfires app called "gotbrick?" to check if you have the bug. If you dont have the bug thenyou can do a wipe from any ROM/kernel and directly flash the new firmware.
And yes you will get SNote and the Touchwiz with the new firmware preinstalled.
endingcolt007 said:
am unable to do so, anyone can help out on how to embedd the video in the original post?
Click to expand...
Click to collapse
Done!
question
:victory:
Randomwalker said:
Why wipe at all when upgrading form stock f/w?
I updated my Note from 2.3.6 to 4.0.3 (to speedmod K3-7 via CWM) to 4.0.4 all without a single wipe. Didn't experience any problems.
Click to expand...
Click to collapse
hi thanks for the input. I have a question that the difference between version 4.0.4 ics 4.0.4 ics German and international? thank you very much, and thank you very much
endingcolt007 said:
hey man from the post there i see that you have the cm9 kernel installed over the stock Gingerbread ROM(Correct me if im wrong)!
So as far as i know you will fall under the first category because the eMMC_ERASE function has been disabled in the cm9 knightlies kernel. But just download chainfires app called "gotbrick?" to check if you have the bug. If you dont have the bug thenyou can do a wipe from any ROM/kernel and directly flash the new firmware.
And yes you will get SNote and the Touchwiz with the new firmware preinstalled.
Click to expand...
Click to collapse
Thnx for reply. I am not too experienced, but i think yes, i have CM9 installed over stock GB. So i am runing ICS, but first category goes for GB, does it realy is my case? I have checked gotbrick app and it said that i have that nasty bug. But i have still done some factory resets and wipes and so far so good, as i understand that because of safe kernel. So i am still in danger but in kernel the use of mmc has been disabled, if i follow the guide isnt the 3d category safer? Because its careful about brickbug?
sorry I'm wrong post
endingcolt007 said:
How to Flash Android 4.0.4 Firmware for Galaxy Note GT N7000
This Tutorial is Divided into 3 Parts:
1) People who are running Gingerbread who are not affected by the eMMC bug
2) People who are running IceCreamSandwitch who dont have the eMMC bug
3) People who are running IceCreamSandwitch who have the eMMC bug
Please Find Your Respective Section in the tutorial below!
For Current Gingerbread Users
Since Gingerbread is safe from the eMMC superbrick bug, you can directly go ahead and do a complete factory reset/wipe and clear cashe either from settings>privacy>factory reset OR via stock recovery. After the factory reset/wipe, you need to download the "zip" file from here: http://www.hotfile.com/dl/162875101/447fb8f/N7000XXLRG_N7000DBTLRG_DBT.zip.html
After the download is complete, open the zip file using WINRAR and you will see two files:
• A “.md5” file
• A “.dll” file
Unextract both to folder/desktop. Now you need to download ODIN and samsung drivers if you do not have them. For ODIN just download from here: https://www.dropbox.com/s/09glpz0zg7c2dpo/Odin3 v1.83.exe
For drivers just download & install the samsung kies from here:
http://www.samsungapps.com/about/onPc.as
After installing Kies you will have the drivers installed.(you may need restart for drivers to work) Then you will need to put your phone in download mode(Volume Down + Home + Power Button) and then press volume up to continue to enter the download mode. Then connect your Galaxy Note to PC using MicroUSB cable and open ODIN. In ODIN make sure that the box has turned yellow for this to work. If it does not then there is problem with the drives. You then need to select the PDA button and navigate to the ".md5" file that you unextracted and select it. Make sure only "Auto Reboot" & "F. Reset Time" are checked and then you can hit the start button. It should then start flashing. After flashing is done a box should turn green and the phone will automatically reboot. Flashing usually takes upto 10-15 mins.
For Current IceCreamSandwitch(4.0.3) Users who DON’T have eMMC brickbug
First please check whether your device has the eMMC brick bug via chainfires app called “GotBrick?” If your device does not have the brick bug then simply factory reset it via settings and then you can download the Android download the "zip" file from here: http://www.hotfile.com/dl/162875101/447fb8f/N7000XXLRG_N7000DBTLRG_DBT.zip.html
After the download is complete, open the zip file using WINRAR and you will see two files:
• A “.md5” file
• A “.dll” file
Unextract both to folder/desktop. Now you need to download ODIN and samsung drivers if you do not have them. For ODIN just download from here: https://www.dropbox.com/s/09glpz0zg7c2dpo/Odin3 v1.83.exe
For drivers just download & install the samsung kies from here:
http://www.samsungapps.com/about/onPc.as
After installing Kies you will have the drivers installed.(you may need restart for drivers to work) Then you will need to put your phone in download mode(Volume Down + Home + Power Button) and then press volume up to continue to enter the download mode. Then connect your Galaxy Note to PC using MicroUSB cable and open ODIN. In ODIN make sure that the box has turned yellow for this to work. If it does not then there is problem with the drives. You then need to select the PDA button and navigate to the ".md5" file that you unextracted and select it. Make sure only "Auto Reboot" & "F. Reset Time" are checked and then you can hit the start button. It should then start flashing. After flashing is done a box should turn green and the phone will automatically reboot. Flashing usually takes upto 10-15 mins.
For Current IceCreamSandwitch(4.0.3) Users who have eMMC brickbug
First please check whether your device has the eMMC brick bug via chainfires app called “GotBrick?” If your device has the brick bug then you cannot do a factory reset and directly install the new 4.0.4 firmware. You will first need to downgrade to a Gingerbread Firmware, then do a complete factory reset/wipe and clear cashe and then reflash the Android 4.0.4 firmware. So the first thing you need to do is download the Gingerbread Firmware from here: http://www.sammobile.com/firmware/?page=3&t=1&o=1&m=GT-N7000&r=1#regiona
(You will need to signup to download)
For Samsung Kies with drivers:
http://www.samsungapps.com/about/onPc.as
For ODIN:
https://www.dropbox.com/s/09glpz0zg7c2dpo/Odin3 v1.83.exe
After you have downloaded the zip file, unextract it and then flash the “.md5” in the PDA section of ODIN.
After flash you will have Gingerbread. In Gingerbread you have to do a wipe & clear cashe from the stock recovery(Volume Up + Home Button + Power Button). After the wipe, you need to download the Android 4.0.4 Firmware from here:
http://www.hotfile.com/dl/162875101/447fb8f/N7000XXLRG_N7000DBTLRG_DBT.zip.html
After the download is complete, open the zip file using WINRAR and you will see two files:
• A “.md5” file
• A “.dll” file
Unextract both to folder/desktop. Now you need to download ODIN and samsung drivers if you do not have them. For ODIN just download from here: https://www.dropbox.com/s/09glpz0zg7c2dpo/Odin3 v1.83.exe
For drivers just download & install the samsung kies from here:
http://www.samsungapps.com/about/onPc.as
After installing Kies you will have the drivers installed.(you may need restart for drivers to work) Then you will need to put your phone in download mode(Volume Down + Home + Power Button) and then press volume up to continue to enter the download mode. Then connect your Galaxy Note to PC using MicroUSB cable and open ODIN. In ODIN make sure that the box has turned yellow for this to work. If it does not then there is problem with the drives. You then need to select the PDA button and navigate to the ".md5" file that you unextracted and select it. Make sure only "Auto Reboot" & "F. Reset Time" are checked and then you can hit the start button. It should then start flashing. After flashing is done a box should turn green and the phone will automatically reboot. Flashing usually takes upto 10-15 mins.
Click to expand...
Click to collapse
hi thanks for the input.
I have a question that the difference between version 4.0.4 ics Germany and international?
thank you very much, and thank you very much
xtc218 said:
:victory:
hi thanks for the input. I have a question that the difference between version 4.0.4 ics 4.0.4 ics German and international? thank you very much, and thank you very much
Click to expand...
Click to collapse
What do you mean by 4.0.4 international? Also I think this is slightly OT, better ask in the main 4.0.4 open Germany thread.
Sent from my A510 using xda app-developers app
endingcolt007 said:
How to Flash Android 4.0.4 Firmware for Galaxy Note GT N7000
This Tutorial is Divided into 3 Parts:
...
Click to expand...
Click to collapse
As I understand, you have to be rooted to flash a ROM from GB to any other ROM using Odin, but your tutorial doesn't mention the need to be rooted. Am I mistaken?
Criskelo ICS LQ3 v8, LPT Modem, speedmod 3-7 kernel, Carrier: AT&T (US)
I'm at the 3rd section...but why flash gb rom??? You only need flash abyss kernel and do the wipes, and then continue to flash 4.0.4
Am i right or not?
Sent from my GT-N7000 using Tapatalk 2
astrologos said:
I'm at the 3rd section...but why flash gb rom??? You only need flash abyss kernel and do the wipes, and then continue to flash 4.0.4
Am i right or not?
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
you can also use abyss!
Nice thread and very useful....
I just want to make a sugestion, change the title or include the KIES method for users on german csc devices. I have a german csc, updated with KIES, no wipe no resets and all is ok (48H) no lags,no crashes just nice 4.0.4 (yep still unrooted and stock). It even restores all you apps and settings (except bluetooth devices)....
Like i said: Just a "safe" sugestion
becosemsaida
By using this guide (3 kategory) i managed to get my note to 4.0.4. Problem is phone got kinda slow.... benchcmarks was lower by 20% than on 4.0.3. and animations are very choppy. But i read, that this update should give better performance? Mybe i messed something up? Before that, i flashed my stock rom to cm9 using this guide: http://forum.xda-developers.com/showpost.php?p=26428986&postcount=1 and then used 3d kategory part from this guide. Please help... i want mu smooth note back
Latvianization said:
By using this guide (3 kategory) i managed to get my note to 4.0.4. Problem is phone got kinda slow.... benchcmarks was lower by 20% than on 4.0.3. and animations are very choppy. But i read, that this update should give better performance? Mybe i messed something up? Before that, i flashed my stock rom to cm9 using this guide: http://forum.xda-developers.com/showpost.php?p=26428986&postcount=1 and then used 3d kategory part from this guide. Please help... i want mu smooth note back
Click to expand...
Click to collapse
thats kinda wierd man! performance seems to have improved for me. cant really say if something went wrong!!! but if you want to go back to your 4.0.3 firmware then you can easily flash the 4.0.3 firmware via ODIN. To get the 4.0.3 fimrmware goto: www.samfirmware.com>firmwares>smartphones>android>GT N7000>(ur region)> and download the firmware for your region/country.
After download just unextract the .md5 file and flash via ODIN.
Does it have the same interface as Samsung Galaxy SIII ICS 4.0.4? I have done the upgrade but not much features change except the pop-up play..thats all .What a letdown!
i installed merruk technology kernel pre 2.0 final ... and now want to restore back to default kernel(stock) .. i have ddle1 stock rom running....
i tried restoring to stock kernel provided there on merruk kernels page but the kernel wont remove help me please
if i could get boot.img from ddle1 rom i would be greatful ...
or can someone tell me how to extract it from .md5 flashable rom i have ( through odin )
and when i try to flash a stock rom (ddle1 for instance ) through odin it shows this error.. the picture is attached below
chotu222 said:
i installed merruk technology kernel pre 2.0 final ... and now want to restore back to default kernel(stock) .. i have ddle1 stock rom running....
i tried restoring to stock kernel provided there on merruk kernels page but the kernel wont remove help me please
if i could get boot.img from ddle1 rom i would be greatful ...
or can someone tell me how to extract it from .md5 flashable rom i have ( through odin )
and when i try to flash a stock rom (ddle1 for instance ) through odin it shows this error.. the picture is attached below
Click to expand...
Click to collapse
You have to select Modem and CSC files too I guess
avinash9441 said:
You have to select Modem and CSC files too I guess
Click to expand...
Click to collapse
I tried with MODEM and CSC also i got FAIL !!!!! at top left box :crying::crying::crying:
here plz help
you sure you picked all 3 files? shud be ok by then .
Sent from my GT-S5360 using xda app-developers app
chotu222 said:
I tried with MODEM and CSC also i got FAIL !!!!! at top left box :crying::crying::crying:
here plz help
Click to expand...
Click to collapse
Download and flash through odin DDLC2_ODDLA2_DDLC2 or DDLE1_DDLD1_DDLE1. Even I had problem with DDLA3_DDLA2_DDLA2.
Hope it works now.
hmmm
Im really confused, because if you flashed merruk kernel and it did not work then just download recovery kernel..
put phone in download mode (power+home+volume down)
plug phone to pc while odin is open
choose recovery kernel on PDA option (don't check or uncheck anything)
flash it and it should work... lol
Stock : http://www.mediafire.com/?dzfcrhb8fj3s40x
Terma Kernel ; http://www.mediafire.com/?81d1acx1c19m9k5
Test Kernel ; http://www.mediafire.com/?0j6guwgg60opj7y
-----------------------------
iplaygalaxyy for android
chotu222 said:
i installed merruk technology kernel pre 2.0 final ... and now want to restore back to default kernel(stock) .. i have ddle1 stock rom running....
i tried restoring to stock kernel provided there on merruk kernels page but the kernel wont remove help me please
if i could get boot.img from ddle1 rom i would be greatful ...
or can someone tell me how to extract it from .md5 flashable rom i have ( through odin )
and when i try to flash a stock rom (ddle1 for instance ) through odin it shows this error.. the picture is attached below
Click to expand...
Click to collapse
It was happened to me before.. I have no choice but to flash to a fresh STOCK ROM with stock Kernel.
The SOLUTION would be ODIN. Go to Doky's thread and select the latest version of your firmware based on your country - download and extract.
Here's his thread : http://forum.xda-developers.com/showthread.php?t=1465800
Now, download ODIN if you're not having it yet. here's the thread - credits to OP : http://forum.xda-developers.com/showthread.php?t=1464775
Here's the instruction on how to flash to STOCK ROM and Kernel. http://forum.xda-developers.com/showpost.php?p=21846668&postcount=2
I did formatted my sd card extent that time too hope it helps.
anyone can help
Restore to Stock Kernel
Download the stock kernel ...
In Odin choose PDA and select the kernel
Flash it in Download Mode....
guys
i can only give you my solution....i was on hells kernel #50 and i wanted to revert to stock.....
i tried DOKY73 sirs stock roms but they didnt work.
thus, my and my friend YASH 98 modded it and now it works perfectly....
simply use these instead of the stock on DOKY73s thread.
http://d-h.st/tjd
[ Tested ] [ worked when sir dokys failed ]
how to remove meruuk kernel from g s5360[[[[[[samsung glaxy y]]]]]]]]
my build is GINGERBREAD.DDLF2
BASEBAND version isS5360DDLF1
KERNEL IS 2.6.35.7 Merruk [email protected]
I want to revert back to my stock kernel.please tell me how to do this.
I can't update my phone because of it.
Flash stock rom via odin. U can get all the requirements at sir doky73's thread.
What u need :
1. Odin
2. Your own country's firmware and totoro_0623.pit ( find it on the web. )
3. Usb drivers
4. A pc
5. Samsung usb cable
Extract the zip file u downloaded of your country's firmware. Open the odin.exe on your pc (windows ), then pit option choose totoro.pit, boot option choose boot, phone choose modem file, pda choose pda.
Finished press volume down + home button + power button to download mode on samsung galaxy y. Then screen turns on press volume up again. Connect the usb cable to your phone to pc.
Then odin recognises your phone and shows a yellow thing on the top. Then press start and wait for it to boot up !
Remember to press thanks ya !
Sent from my GT-S5360 using xda app-developers app
That ,or you can flash stock kernel via flashable zip. I remember seeing one in hells fusion thread.
A_Reloaded said:
That ,or you can flash stock kernel via flashable zip. I remember seeing one in hells fusion thread.
Click to expand...
Click to collapse
from where can i get a flashable zip of stock kernel??????
Idk. Search...
Try to get a boot.img of stock kernel.
Then search for Sgybicwm.zip in general section. Put the stock boot.img in root of your sdcard and flash sgybicwm.zip via cwm. You are done.
Any other boot.img flasher like faqbly wont work. I just tried it with hells fusion 50. it has a stock kernels boot.img inside stock folder of the kernels zip. Get that and sgybicwm.zip
[Bruce Wayne] said:
Idk. Search...
Try to get a boot.img of stock kernel.
Then search for Sgybicwm.zip in general section. Put the stock boot.img in root of your sdcard and flash sgybicwm.zip via cwm. You are done.
Any other boot.img flasher like faqbly wont work. I just tried it with hells fusion 50. it has a stock kernels boot.img inside stock folder of the kernels zip. Get that and sgybicwm.zip
Click to expand...
Click to collapse
PLEASE HELP ME. I TRIED TO INSTALL STOCK KENEL BY APPLYING ZIP IN CLOCKORKMOD.
THE SITE WAS GALAXY4GAMING.COM. IT TOLD ME TO WIPE DATA AND CACHE AND THEN INSTAAL ZIP. I DO THAT.IT SAYS INSTALLATION IS ABORTED. I GET BORED AND REBOOT MY PHONE. WHEN I REBOOT IT ,,IT ONLY SHOWS A BLOCK ELCOME SCREEN WIH GALAXY Y WRITTEN ON IT AND DOES NOT DO ANYHING.IT SHOWS IT FOR HOURS AND HOURS.PLESE HELP AND TELL ME WHAT TO DO.:crying::crying::crying:
YES He is right this is a good method of flashing the stock kernel instead of flashing the whole firmware again.
GT S5360
Rom - Jelly Blast v4.0.5
Kernel - Marroc v2.0 Final
Overclocked - 1.2 GHz
Undervolted - -100 mV
Battery - 3200 mAh
SD Card - 32 GB class 10
Swap - 256 MB
SD / EXT - 2 GB ext 3
apoorva.97 said:
PLEASE HELP ME. I TRIED TO INSTALL STOCK KENEL BY APPLYING ZIP IN CLOCKORKMOD.
THE SITE WAS GALAXY4GAMING.COM. IT TOLD ME TO WIPE DATA AND CACHE AND THEN INSTAAL ZIP. I DO THAT.IT SAYS INSTALLATION IS ABORTED. I GET BORED AND REBOOT MY PHONE. WHEN I REBOOT IT ,,IT ONLY SHOWS A BLOCK ELCOME SCREEN WIH GALAXY Y WRITTEN ON IT AND DOES NOT DO ANYHING.IT SHOWS IT FOR HOURS AND HOURS.PLESE HELP AND TELL ME WHAT TO DO.:crying::crying::crying:
Click to expand...
Click to collapse
Stop using all caps mate.
Keep kalm and use odin.
Can you go to recovery mode?
And download mode?
Try to give as much info as you can. So that people here can assist you better.
[Bruce Wayne] said:
Stop using all caps mate.
Keep kalm and use odin.
Can you go to recovery mode?
And download mode?
Try to give as much info as you can. So that people here can assist you better.
Click to expand...
Click to collapse
i dont know what is download mode. i cant go in recovery mode too. its my fisrtt mobile.only passed 3 months with it . o god i am crying:crying::crying::crying::crying::crying::crying:
Ok.
Here is what you need to do.
Download a stock rom from dock73's thread from dev section (its a sticky one, so no trouble in finding it).
Then download odin3 v1.85 from same thread.
Get samsung mobile device drivers.
Install drivers first.
Then extract all those zips (rom and odin ) in a separate folder.
Open odin.exe.
Then switch off your phone (pull battery if nothing works).
Press Volume down + Power + Home Buttons All at same time
You will be I'm download mode.
Press volume up and connect your phone to pc with data cable.
You will see a yellow signal on odin screen. Dont change anything and just add those files from the firmwares you extracted in the folder.
Csc.tar.md5 for csc
Modem.tar.md5 for phone
And
pda.tar.md5 for pda
Click on start and it will show a pass to you when completed.
Hope that complets all for you.
If you still dont get head over to docky thread.
And see 2nd post.
Hello everybody
My friend has a Samsung Galaxy Y GT-S5360 and since yesterday it won't start. It shows "Samsung Galaxy Y young" and doesn't start. So I decided to try to root it and install Jellyblast v3 but it's the same problem. I followed a tutorial and tried to wipe cache and data but still the same problem. So now I read that the people who had the same problem as me, resolved their problem by flashing the stock rom with odin. But I saw that we needed some information like PDA, PHONE and CSC but I can't have these informations as the phone won't start So I am going to follow a tutorial to flash it with odin. But I'm worried about bricking definitely her phone :s So I want to know if there is no risk to brick her phone if I try to flash a stock rom without knowing these information (PDA PHONE CSC).
Thanks for your help and sorry for my bad english °° !!
please look in my signature for easy flashguide,there is all info you need.its very newby friendly and believe me thats no problem,you just stuck on boot,its not so bad and easy to solve,you only need a uauable brain an eyes.i know u can do it.good luck
-CALIBAN666- said:
please look in my signature for easy flashguide,there is all info you need.its very newby friendly and believe me thats no problem,you just stuck on boot,its not so bad and easy to solve,you only need a uauable brain an eyes.i know u can do it.good luck
Click to expand...
Click to collapse
Thanks for your answer
I downloaded a package and indeed there are 3 files into the zip. But these file are PDA / CSC / MODEM and in your guide you mention a PHONE file, is that the MODEM file ?
EDIT: Sorry I found my answer ^^"
Maws59 said:
Thanks for your answer
I downloaded a package and indeed there are 3 files into the zip. But these file are PDA / CSC / MODEM and in your guide you mention a PHONE file, is that the MODEM file ?
EDIT: Sorry I found my answer ^^"
Click to expand...
Click to collapse
Don't say thanks buddy,,,,there is a thanks button already ,just press it to appriciate OP for the usefull post..:thumbup:
:thumbup: DON'T FORGET TO PRESS THANKS BUTTON IF I HAVE A BIT SUCCESS TO HELP YOU :thumbup:
Hello
We managed to install a package but there are no french language in the one we installed. But we have these information now:
PDA: S5360DXKJ3
PHONE: S5360DXKJ1
CSC : S5360OLBKJ2
Could you tell me which package we must install to have the french language please ?
Thanks a lot for your help !!
EDIT : If you saw my last edit I did a mistake when telling informations x)
EDIT : Problem solved : http://forum.xda-developers.com/picture.php?albumid=8046&pictureid=28987
problem persists
TECHNO_THUNDER said:
Don't say thanks buddy,,,,there is a thanks button already ,just press it to appriciate OP for the usefull post..:thumbup:
:thumbup: DON'T FORGET TO PRESS THANKS BUTTON IF I HAVE A BIT SUCCESS TO HELP YOU :thumbup:
Click to expand...
Click to collapse
odin doesnt show a yellow bar while i connect my device in download mode. what to do??
odin id not detecting my device
aditya22u said:
odin doesnt show a yellow bar while i connect my device in download mode. what to do??
odin id not detecting my device
Click to expand...
Click to collapse
try install sgy drivers http://forum.xda-developers.com/showthread.php?t=2327476 .
aditya22u said:
odin doesnt show a yellow bar while i connect my device in download mode. what to do??
odin id not detecting my device
Click to expand...
Click to collapse
You should install SGY driver first
gts5360
my phone is not starting after install cwm just showing samsung logo
help me i tryed to connect odin but not connect
heart428 said:
my phone is not starting after install cwm just showing samsung logo
help me i tryed to connect odin but not connect
Click to expand...
Click to collapse
you installed cwm how?
there is only to types of cwm for galaxy y
1 - tempory cwm zip - flashed in stock recovery to give you cwm - this zip must be flashed each time you enter recovery to bring up cwm
2 - perminant cwm - this is included in a custom kernel and replaces stock kernel and stock recovery with a custom kernel and recovery
if you flashed a kernel state which one it was
to use odin
download odin 3.07
download and install samsung usb drivers
put phone in download mode by pressing vol down home button power button until download screen appears
connect phone to pc via usb cable
press vol up to begin connection
wait for drivers to install
open odin
on the left hand side it should say under com:id com then a number in a coloured box if connected
then put
pda in pda
modem in phone
csc in csc
then start
Samsung Galaxy wont Start and cant acces the System recovery
Hi ! my Samsung Galaxy y young GT-s5360 wont start after my friend tried to Upgrade it,
After i've tried to open my phone, its Stuck on the Logo "Samsung Galaxy Y young GT-S5360"
i've tried to wait of almost 10 minutes but my phone still Freeze,I've also tried to Access the Samsung Sytem recovery but it wont appear on my Screen
pls. Help me
pls. Help me
Click to expand...
Click to collapse
u phone got brick. please read previous post. u problem can be solved by use Odin.
You can flash stock rom without odin..but you need CWM
shyamSGY said:
You can flash stock rom without odin..but you need CWM
Click to expand...
Click to collapse
no you cant flash stock "firmware" without odin
if you flash a so called stock firmware via cwm all you are doing is flashing a custom rom with no modifications - slight technically difference
marcussmith2626 said:
no you cant flash stock "firmware" without odin
if you flash a so called stock firmware via cwm all you are doing is flashing a custom rom with no modifications - slight technically difference
Click to expand...
Click to collapse
By keeping a Nandroid backup in sdcard and restoring with Cwm..
I have ddle1 backup
shyamSGY said:
By keeping a Nandroid backup in sdcard and restoring with Cwm..
I have ddle1 backup
Click to expand...
Click to collapse
wouldnt work though if you changed your file system to ext to use cm7/9/cyanmobile/pa
you can only restore a nandroid backup fully if you restore it on the kernel on which it was made and you are on the same file system as it was made although you can advanced restore if on different kernel and should work if it can verify md5 sum
hemmm
marcussmith2626 said:
you installed cwm how?
there is only to types of cwm for galaxy y
1 - tempory cwm zip - flashed in stock recovery to give you cwm - this zip must be flashed each time you enter recovery to bring up cwm
2 - perminant cwm - this is included in a custom kernel and replaces stock kernel and stock recovery with a custom kernel and recovery
if you flashed a kernel state which one it was
to use odin
download odin 3.07
download and install samsung usb drivers
put phone in download mode by pressing vol down home button power button until download screen appears
connect phone to pc via usb cable
press vol up to begin connection
wait for drivers to install
open odin
on the left hand side it should say under com:id com then a number in a coloured box if connected
then put
pda in pda
modem in phone
csc in csc
then start
Click to expand...
Click to collapse
what i should put at those pda,phone and csc ? sorry, i'm newbie
IsyrafSan said:
what i should put at those pda,phone and csc ? sorry, i'm newbie
Click to expand...
Click to collapse
Don't understand the question sorry
Like I said - download the firmware from my firmware thread & follow all the instructions
Pda goes in pda
Modem goes in phone
CSC goes in csc
Please follow all instructions on my firmware thread - links in signature
Hi all
I haves flash the 4.2.2 echo rom
Over the 4.3
And the phone had stock on the note 3 logo
He say u should flash the 4.2.2 Kitkat (custom) over the stock 4.2.2 note 3 rom
I had download the 4.2.2 bootloader and flash it in (((bootlaoder)) section in Odin then my phone had stock and restart by it self so what I want now !!
4.2.2 stock to flash it from Odin pls pls pls
And the bootlaoder
Pls guys and thnx
Because now I can't use my phone only in download mode
And thnx
Any links for the stock 4.2.2 to flash it by Odin and thnx
@me said:
Hi all
I haves flash the 4.2.2 echo rom
Over the 4.3
And the phone had stock on the note 3 logo
He say u should flash the 4.2.2 Kitkat (custom) over the stock 4.2.2 note 3 rom
I had download the 4.2.2 bootloader and flash it in (((bootlaoder)) section in Odin then my phone had stock and restart by it self so what I want now !!
4.2.2 stock to flash it from Odin pls pls pls
And the bootlaoder
Pls guys and thnx
Because now I can't use my phone only in download mode
And thnx
Any links for the stock 4.2.2 to flash it by Odin and thnx
Click to expand...
Click to collapse
Providing you mean 4.4.2:
http://forum.xda-developers.com/showpost.php?p=49526857&postcount=2
Nightmare79 said:
Providing you mean 4.4.2:
http://forum.xda-developers.com/showpost.php?p=49526857&postcount=2
Click to expand...
Click to collapse
Yes any help !!??
@me said:
Yes any help !!??
Click to expand...
Click to collapse
Well I thought I just did. If you want to install 4.4.2 stock. Then follow the guide.
- Downloaded official kitkat from this threads first page or mirrors here: https://mega.co.nz/#!jZYkyY5a!HfiJlXRgp_ZGWoQncFNWeEn5FnY_0i9iFb23EGfg2Nk
- Downloaded Odin v1.85 from here: http://www.modaco.com/topic/361399-...-183-all-versions-samsung-rom-flashing-tools/
- Fully wiped phone from settings>general>reset
- Run odin
- turn phone off
- put phone into downloading mode (Vol down + home + power)
- after warning notification, Vol up to continue
- Plug phone into PC with usb cable
- In Odin tick PDA checkbox and load extracted rom file
- In Odin tick Phone Bootloader Update (Auto Reboot and F. Reset Time are already default ticked aswell)
- Start
- After it rebooted it hung for a bit on splash screen saying it was loading recovery, then rebooted.
- After long reboot, it loaded to OS setup screen.
- Completed setup
Click to expand...
Click to collapse
Nightmare79 said:
Well I thought I just did. If you want to install 4.4.2 stock. Then follow the guide.
Click to expand...
Click to collapse
Ok bro I will try this and tell u thnx
Hello.
Please help me to unroot SM N9005 from Malaysia and please guide me how to install the Original ROM.
Thanks a lot.
I'm fully appreciate with your help.
Flashing a stock ROM with Odin will remove root; therefore, there is no need to unroot before flashing a stock ROM.
audit13 said:
Flashing a stock ROM with Odin will remove root; therefore, there is no need to unroot before flashing a stock ROM.
Click to expand...
Click to collapse
May i know what is the steps to do that ? I'm a newbie to this thingy. Thank you
ReuVerz said:
May i know what is the steps to do that ? I'm a newbie to this thingy. Thank you
Click to expand...
Click to collapse
https://forum.xda-developers.com/galaxy-note-3/general/samsung-galaxy-note-3-sticky-roll-t3237249
JJEgan said:
https://forum.xda-developers.com/galaxy-note-3/general/samsung-galaxy-note-3-sticky-roll-t3237249
Click to expand...
Click to collapse
i can't find any related topic there
Multiple posts on this topic.Search works.
Basics flash stock rom through odin .
Extract (unzip) the firmware file
Download Odin v3.09
Extract Odin zip-file
Open Odin v3.09
Reboot phone in Download Mode (press and hold Home + Power + Volume Down buttons)
Connect phone and wait until you get a blue sign in Odin
Add the firmware file to AP / PDA
Make sure re-partition is NOT ticked
Click the start button, sit back and wait a few minutes
JJEgan said:
Multiple posts on this topic.Search works.
Basics flash stock rom through odin .
Extract (unzip) the firmware file
Download Odin v3.09
Extract Odin zip-file
Open Odin v3.09
Reboot phone in Download Mode (press and hold Home + Power + Volume Down buttons)
Connect phone and wait until you get a blue sign in Odin
Add the firmware file to AP / PDA
Make sure re-partition is NOT ticked
Click the start button, sit back and wait a few minutes
Click to expand...
Click to collapse
normally how long should i wait until i get blue sign in Odin ?
Thanks a lot
ReuVerz said:
normally how long should i wait until i get blue sign in Odin ?
Thanks a lot
Click to expand...
Click to collapse
Instantly, or maybe a couple of seconds.
But make sure you installed "Samsung Mobile Devices USB Driver" before using Odin.