Related
Hello Guys,
i have a question about problem i have with my DEsire HD.
I've turned my device of last night and i tryed to put it on this morning, but its freezes at the white Backround Green "HTC" screen. I've taken out the battery and gave it another try, but it still freezes the same way.
I thought i can fix the problem by Updating from revolution hd 6.1.0 to 6.1.1 but at the installation with recovery mode over boot laoder ( power on + vol down ), i get an error Status 7.
I've searched google and found you have to super wipe your device and wipe the cache, ive done this and now i only can acces the Bootloader if i try to get to recovery mode, the recov mode loops.
Is there a way to unbrick my dive over H-Boot USB Plug?
Get the sdk, go bootloader, and do 'flash recovery recovery name.img'
Sent from HydrOG3N MOD DHD.
Technology Evolves, Android Evolves.
HydrOG3N is THE Revolution.
If that doesnt work, you could always redownload the stock 1.32 rom [Download link here http://forum.xda-developers.com/showthread.php?t=905003] and paste it onto the SD card. When booting into bootloader it should re-install the stock rom. You'll have to re-root and install recovery again.
It s not a brick for sure...
Think I've bricked mine, when I attempt to power on, nothing happens except for 5 short battery vibrations, black screen, green battery light stays on. I have a back up but cant acces recovery to install it. Please HELP!!
Id reckon its hard to brick them nowadays
Sent from my HTC Desire HD using XDA App
Does it respond on your USB connection ? Take out your SD card... Most unlikely it became trash what were you doing before it went black ?
Sent from my HTC Desire HD using xda premium
zadok1873 said:
Think I've bricked mine, when I attempt to power on, nothing happens except for 5 short battery vibrations, black screen, green battery light stays on. I have a back up but cant acces recovery to install it. Please HELP!!
Click to expand...
Click to collapse
This has happened to me a couple of times, remove the battery and leave it out for a couple of minutes, reboot and voila (although it might not boot to OS, you should at least be able to access recovery)
Hi. DId you fix the issue. I have 2 devices with the same simptoms, i flashed stock rom, custom roms, but nothing helps. I think problem is in radio, cause even if i flash it from fastboot and it gives me that ok is OK, radio version didn't change.
is there any update abt ur problem
zadok1873 said:
Think I've bricked mine, when I attempt to power on, nothing happens except for 5 short battery vibrations, black screen, green battery light stays on. I have a back up but cant acces recovery to install it. Please HELP!!
Click to expand...
Click to collapse
Dear zadok1873, i have the same problem like you, dont know what to do..
guys is there anyone have any idea how to resolve from this problem.
download a stock rom(like this http://hotfile.com/dl/122907083/4aeb4fa/RUU_Ace_Gingerbread_S_HTC_WWE_2.50.405.2_Radio_12.)
go to bootloader and run .exe file
the rom will be install
re-root your device
enjoy
shafaet said:
Dear zadok1873, i have the same problem like you, dont know what to do..
guys is there anyone have any idea how to resolve from this problem.
Click to expand...
Click to collapse
Probably your vol+ button is stuck.
I do what i want, because I can.
Dear Flussen,
Thanks a lot Buddy, it worked, i just amazed seems My desire was gone. but after applying your Method it brought into Life.
Thanks Again you guys are Rock....
Solution was so Simple but yes you're right have to know how to solve...
---------- Post added at 01:52 PM ---------- Previous post was at 01:51 PM ----------
Dear Flussen,
Thanks a lot Buddy, it worked, i just amazed seems My desire was gone. but after applying your Method it brought into Life.
Thanks Again you guys are Rock....
Solution was so Simple but yes you're right have to know how to solve...
That's not a brick either
Sent from my Inspire 4G using xda premium
Hi,
1. I rooted my phone successfully.
2. I installed droid2recovery.apk
3. Restarted. Installed CM10 and Gaaps (wrong version)
4. Reboot. Everything was normal with some annoyances due to the wrong version of Gaaps.
5. Checked and the phone was already rooted in CM10. Installed droid2recovery.apk again. Reboot.
6. Trapped in bootloop.
7. Reboot and enter in system recover.
8. Tried to install CM10 and correct Gaaps. Not possible due to failed to verify whole-file signature.
9. Discover that official recover mode doesn't install unofficial roms.
10. Searched for official roms of Milestone 2 BR. All links are broken.
11. I flashed downgrade_for_bl_3 with RSD Lite. Everything was ok. PASS.
12. Still bootloop. Enter in recover mode. Black screen. Can't see the android icon with exclamation mark.
Is my phone a paper holder now? Please advise.
I'm really without luck today.
I manage to flash a SBF with Android 2.3.6, exactly like the one I had. But then I couldn't root, not with the same method I rooted mine, not with any other method.
Then I downloaded another SBF and used RSD Lite to flash it, and the phone completely died. RSD reported everything OK, PASS, Finished, perfect.
Now nothing happens. The phone is off, black screen. Completely dead. But if I hit Power + Vol - + Camera, the computer recognize. But nothing on the screen. I'm re-flashing the same SBF again.
Why different thing happen when I proceed the same way as I did in the past?
Why can't I just flash a recover boot that accepts direct installation of Cyanogen Mod 10???
douglasrac said:
I'm really without luck today.
I manage to flash a SBF with Android 2.3.6, exactly like the one I had. But then I couldn't root, not with the same method I rooted mine, not with any other method.
Then I downloaded another SBF and used RSD Lite to flash it, and the phone completely died. RSD reported everything OK, PASS, Finished, perfect.
Now nothing happens. The phone is off, black screen. Completely dead. But if I hit Power + Vol - + Camera, the computer recognize. But nothing on the screen. I'm re-flashing the same SBF again.
Why different thing happen when I proceed the same way as I did in the past?
Why can't I just flash a recover boot that accepts direct installation of Cyanogen Mod 10???
Click to expand...
Click to collapse
You have to flash that same Android 2.3.6 SBF file, you can't use any more that "another sbf". For rooting that 2.3.6 use this http://forum.xda-developers.com/showthread.php?t=1750277
http://forum.xda-developers.com/showthread.php?t=1758271 this can help too
After you get CM10 back running, do not use droid2recovery.apk anymore!
Thank you. That really helped.
After you get CM10 back running, do not use droid2recovery.apk anymore!
Click to expand...
Click to collapse
Why not?
Odp: [Q] Black screen and bootloop
douglasrac said:
Thank you. That really helped.
Why not?
Click to expand...
Click to collapse
Because you already have recovery and you don't need it... doing this you can destroy something (maybe 2-init or 2-boot), and you will need to recover your phone using RSD Lite.
via tapatalk
henediac said:
Because you already have recovery and you don't need it... doing this you can destroy something (maybe 2-init or 2-boot), and you will need to recover your phone using RSD Lite.
via tapatalk
Click to expand...
Click to collapse
Hi Douglas, did you get the milestone working again? I'm stucked with the same problem, the rsdlite recognize my cellphone I can flash it but the screen is black. Anything works
How do you fix it?
You can still flash other sbfs, but when do turn on, you need to go in recovery mode, than clear cache and data. It will start normally again.
To go to stock recovery hold when turn on "@" or "x", than when show the "android with ! " you hold volume - and foto or volume + and foto or the volume + and -, than you are in recovery.
Sorry about my English
I am showing all the option because I do not remember perfect what to do... But it works
Sent from my A953 using xda app-developers app
cant get it to work..anyone got a link to a froyo stock sbf?
@Yostarone
http://sbf.droid-developers.org/umts_milestone2/list.php
i don't know what froyo rom you want, so I put link to whole list. (build number for eu froyo is MILS2_U6_2.4.24).
paulimbr said:
Hi Douglas, did you get the milestone working again? I'm stucked with the same problem, the rsdlite recognize my cellphone I can flash it but the screen is black. Anything works
How do you fix it?
Click to expand...
Click to collapse
I didn't get it working. Did you?
douglasrac said:
I didn't get it working. Did you?
Click to expand...
Click to collapse
boot into stock recovery and do a full wipe. This will solve your problem.
Press Power and x (on your Hardwarekeyboard) for several seconds. Release the buttons and you will see a yellow triangle with an exclamationmark in it. Now press vol up and down key together. voilla you got it
lulli1 said:
boot into stock recovery and do a full wipe. This will solve your problem.
Press Power and x (on your Hardwarekeyboard) for several seconds. Release the buttons and you will see a yellow triangle with an exclamationmark in it. Now press vol up and down key together. voilla you got it
Click to expand...
Click to collapse
I wish it was that simple. After flashing the phone is completely dead. And now I cant even go to bootloader anymore.... :crying:
could your problem be battery related? do you have a chance to try using another battery?
lulli1 said:
could your problem be battery related? do you have a chance to try using another battery?
Click to expand...
Click to collapse
Hi,
Sorry for the late reply. I was charging the battery
No, the problem is not the battery. Nothing works anymore. The phone doesn't even turn ON. All Black screen, not even boot loop.
So I get into the bootloader and flash new room. I can see the SN Updated text. But that is it. After it doesn't work.
I flashed DOWNGRADE BL =3 and then I flashed MILA2_U6_3.12.0_SIGNED_US1MILESTONE2PERARB125LA016.0R_GSXMILETPERARLA_P022_A013_M006_HWp2a_WIG142538_Service1FF
Nothing. Black Screen.
Then I flash M2L_U6_4.5.2_51-27_R01_SIGNED_US1MILA2GBPERARB125LA001.0R_STABLE45LAMILETPERLA_P013_A028_M001_HWp2a_Service1FF.
Then I get boot loop.
:S
I have an ideos x5 pro, I wipe boot and my smartphone wouldn't startup. :crying:
can you help me please?
Sahsinho said:
I have an ideos x5 pro, I wipe boot and my smartphone wouldn't startup. :crying:
can you help me please?
Click to expand...
Click to collapse
just put back boot in pink screen
but I don't have a pink screen or anything, and pc don't detect it
Flash step 2 of the official rom you had before!!
pikachukaki said:
Flash step 2 of the official rom you had before!!
Click to expand...
Click to collapse
I find the original rom (froyo 2.2) but what do you mean by flash step 2 (sorry but i'm beginner)
Sahsinho said:
I can't find the original rom (froyo 2.2) and what do you mean by flash step 2 (sorry but i'm beginner)
Click to expand...
Click to collapse
Download the froyo image folder from here: http://www.mediafire.com/?b3qkwulqemswxfq (thanks to gkalenis).
Then power off your phone, pull of the battery, insert it again and press volume up, volume down and power button at the same time until you see a pink screen on your phone. Connect it to pc.
Now your pc recognises a new drive with a folder named image.
You have to replace this folder with the one you downloaded before.
Unplug usb, pull off the battery, insert it again and power up your device.
Sent from my U8800pro using Tapatalk 2
TUPAC_RIP said:
Download the froyo image folder from here: http://www.mediafire.com/?b3qkwulqemswxfq (thanks to gkalenis).
Then power off your phone connect it to pc and press volume up, volume down and power button at the same time until you see a pink screen on your phone.
Now your pc recognises a new drive with a folder named image.
You have to replace this folder with the one you downloaded defore.
Unplug usb, pull off the battery and insert it again and power up your device.
Sent from my U8800pro using Tapatalk 2
Click to expand...
Click to collapse
thank you very much, but like I tell before, the pc can't detect the phone, and when pushing power and any other button nothing change :/
Sahsinho said:
thank you very much, but like I tell before, the pc can't detect the phone, and when pushing power and any other button nothing change :/
Click to expand...
Click to collapse
First press vol+,vol- and power button and then connect your device to pc.
What do you mean ''nothing changes''? What do you see when you press all three buttons together?
Install drivers to your pc so it can detect your device.
Sent from my U8800pro using Tapatalk 2
TUPAC_RIP said:
First press vol+,vol- and power button and then connect your device to pc.
What do you mean ''nothing changes''? What do you see when you press all three buttons together?
Install drivers to your pc so it can detect your device.
Sent from my U8800pro using Tapatalk 2
Click to expand...
Click to collapse
I mean that the phone don't startup, it can't find anything to boot with
Sahsinho said:
I have an ideos x5 pro, I wipe boot and my smartphone wouldn't startup. :crying:
can you help me please?
Click to expand...
Click to collapse
Sahsinho said:
I find the original rom (froyo 2.2) but what do you mean by flash step 2 (sorry but i'm beginner)
Click to expand...
Click to collapse
How did you wipe boot????
Explain please, what did you done.
What rom you had before? ??
Ofiicial froyo 2.2 or what? ??
Sent from my U8800Pro using xda premium
gkalenis said:
How did you wipe boot????
Explain please, what did you done.
What rom you had before? ??
Ofiicial froyo 2.2 or what? ??
Sent from my U8800Pro using xda premium
Click to expand...
Click to collapse
ok
I had the official rom froyo 2.2.2, I download an official rom (2.3) from the official website, but I can't updating my phone because it stopped in the half of the progress bar with a failed error, I tried many time but the same error, so I search in google and I find that I have to wipe data, wipe system, wipe cash and to wipe boot, and then I restart the operation of updating, but it stop in the same position with the same error, and after that the phone wouldn't startup and it don't respond to any command (power+ volume up and/or down ...) and the pc can't detect it.
I think that the problem is the boot but I can't fix it
Sahsinho said:
ok
I had the official rom froyo 2.2.2, I download an official rom (2.3) from the official website, but I can't updating my phone because it stopped in the half of the progress bar with a failed error, I tried many time but the same error, so I search in google and I find that I have to wipe data, wipe system, wipe cash and to wipe boot, and then I restart the operation of updating, but it stop in the same position with the same error, and after that the phone wouldn't startup and it don't respond to any command (power+ volume up and/or down ...) and the pc can't detect it.
I think that the problem is the boot but I can't fix it
Click to expand...
Click to collapse
Once it happend to me. If it is not booting and there is no huawei logo, you have to change the motherboard. If there is Huawei logo you are luckey enough, do the update without battery. A bad flash vanish my huawei logo. I approch the serivec center, and the motherboard has been replaced. So check once if there is huawei logo on screen and do the same update with dload folder without attery
Sahsinho said:
ok
I had the official rom froyo 2.2.2, I download an official rom (2.3) from the official website, but I can't updating my phone because it stopped in the half of the progress bar with a failed error, I tried many time but the same error, so I search in google and I find that I have to wipe data, wipe system, wipe cash and to wipe boot, and then I restart the operation of updating, but it stop in the same position with the same error, and after that the phone wouldn't startup and it don't respond to any command (power+ volume up and/or down ...) and the pc can't detect it.
I think that the problem is the boot but I can't fix it
Click to expand...
Click to collapse
Ok, that's good explanation.
You brick your phone.
As you cannot see huawei's flower or anything then you brick it.
Go to service , you don't have any other option right now.
And please after you get back your phone, DO NOT DO ANYTHING, before ask first.
You follow a completely wrong procedure, so when you get your phone back from service, everyone in this forum can help you on anything you want to do, but now you cannot do anything, sorry ...
Sent from my U8800Pro using xda premium
what about a Jtag or pinout or something like that ??? do you have an idea ???
Sahsinho said:
what about a Jtag or pinout or something like that ??? do you have an idea ???
Click to expand...
Click to collapse
I'm sorry, you don't have other solution, except service.
Sent from my U8800Pro using xda premium
Jtag officially supports our phone though..if u have knowledge you can do it but if u dont..u will destroy it more
-Rik[Rittik]
Alternative: check if can be recognize it via USB in Linux environment.(Linux doesn't need any appropriate drivers)
Sent from my U8800pro using xda app-developers app
Hi. I think I bricked my phone...... All I get now is Black screen, nothing happens when I try to start the Bootloader , and also nothing happens when I try to start the hard reset (holding the volume + and power button) ... All i get is a black screen , my phone is recognized by the RTD Lite, I tried flashing stock software but I still get the same Black screen , and the thing is that I also get a white LED when i connect it to RTD Lite , after I finish my flashing ( I tried many stock softwares) the RTD says that the phone is rebooting but the screen just turns off and remains black , that's it..... I tried removing the battery and such, I have 2 batteries both of them are fully charged... I have all the drivers installed on my pc , I think that how this happened is I flashed by mistake a DEFY + stock soft... is there and hope ??
Thank you.
looperman said:
Hi. I think I bricked my phone...... All I get now is Black screen, nothing happens when I try to start the Bootloader , and also nothing happens when I try to start the hard reset (holding the volume + and power button) ... All i get is a black screen , my phone is recognized by the RTD Lite, I tried flashing stock software but I still get the same Black screen , and the thing is that I also get a white LED when i connect it to RTD Lite , after I finish my flashing ( I tried many stock softwares) the RTD says that the phone is rebooting but the screen just turns off and remains black , that's it..... I tried removing the battery and such, I have 2 batteries both of them are fully charged... I have all the drivers installed on my pc , I think that how this happened is I flashed by mistake a DEFY + stock soft... is there and hope ??
Thank you.
Click to expand...
Click to collapse
anyone???
Flash dfp 231 sbf. If stuck on Motorola logo wipe data from stock recovery
Sent from my MB526 using xda premium
thekguy said:
Flash dfp 231 sbf. If stuck on Motorola logo wipe data from stock recovery
Sent from my MB526 using xda premium
Click to expand...
Click to collapse
where can I find this sbf ?
looperman said:
where can I find this sbf ?
Click to expand...
Click to collapse
I hope this helps http://forum.xda-developers.com/showthread.php?t=966537
Before I bricked my phone , I think I flashed a SBF for Defy+ ......
is there still any hope ?
Looks like you're trying to flash an sbf with a bootloader version lower than the one you had. Flash the DFP 231 CEE sbf as suggested above. That should work.
Root it and flash one of the custom kernel builds. Hope this helps.
Sent from my MB526 using xda premium
heip me
Hai guys, i am currently using defy+ mb 526 2.3.6. it is rooted but not installed cmw. it is stuck with logo M. its loading boot. suggest me some custom sbf stack to flash
I tried to install Cyanogenmod ROM on my nexus 4 with Cyanogenmod installer... When installing process finished my phone bricked...
When I want to boot my phone it turns screen lights but nothing happens... I tried to enter recovery and fastboot but it wont happen... Only screen lights on and nothing on screen... Is there fix for this problem?! What should I do?
Press and hold the power button for 20 seconds. Then try to get into the bootloader
Are you sure the version of cm you flashed was for the n4?
Sent from my Nexus 5 using XDA Free mobile app
jd1639 said:
Press and hold the power button for 20 seconds. Then try to get into the bootloader
Are you sure the version of cm you flashed was for the n4?
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
Yes... But problem is that i can turn on the phone... But nothing happens on the screen... It just turn on screen brightness...
But when I connect phone to PC it start to install drivers (see attached pic)...
Installed driver successfully... Now I will try to install new ROM with NEXUS TOOLKIT. If anyone have different idea please tell me
****!!! I cant fix phone this way... PC recognize phone but problem is that i cant access phone... Pls help someone!!!
http://forum.xda-developers.com/nexus-4/general/tutorial-how-to-unbrick-n4-t2347060
follow that, the only thing you want to skip would be putting the phone into download mode, since yours already is (full jellybean on mako = lgnpst download mode, or qnpst mode, it depends)
opssemnik said:
http://forum.xda-developers.com/nexus-4/general/tutorial-how-to-unbrick-n4-t2347060
follow that, the only thing you want to skip would be putting the phone into download mode, since yours already is (full jellybean on mako = lgnpst download mode, or qnpst mode, it depends)
Click to expand...
Click to collapse
Thanks man, i will try this... I will come back later with feedback.... Thank you very much...
Thank you man!!! You saved my phone... My phone is working... I cant believe it... THANK YOU AGAIN!!!
AljosaXXX said:
Thank you man!!! You saved my phone... My phone is working... I cant believe it... THANK YOU AGAIN!!!
Click to expand...
Click to collapse
glad its working now