Hello All,
I want install the BaseBand EPU93_U_00.59.01 on my Defy for star to unlock it, I have the EPU93_U_00.59.00 dhgt, If I am not wrong, just need put the baseband zip file on SdCard and reboot in recovery mode and install from SdCard ?
But I can only installing update.zip file from my sdcard and chose an other file ? like the picture, and I test to rename the BaseBand file to update file but not work ?
View attachment 1378400
where is my error pls ?
Best Regards,
Pedroleroi.
u need to root and use baseband switcher app
Sent from my MB526 using xda premium
Please ask all questions in Q&A. Thread moved there.
tks to all, there is the picture of my recovery mode :
View attachment 1379991
and I forget to give the information, but sure my phone is rooted,
@ nogoodusername
can you give me more information or link pls ?
Best Regards,
Pedroleroi.
if you want to flash a zip you have to reboot into custom recovery. you are in stock recovery.
if you didn't install cwm, you have to do that first. a start would be to read the beginners guide. (sticky in general section). good luck.
@ measel
can you give me more information pls ?
Best Regards,
Pedroleroi.
Read this for educational purposes (it explains about flashing, rooting and so on...):
ALLINONEBEGINERSGUIDE: http://forum.xda-developers.com/showthread.php?t=1216982
WIKI: http://forum.xda-developers.com/wiki/Motorola_Defy
especially here: http://forum.xda-developers.com/wik...rt_the_2ndinitdefy_bootloader.2Frecovery_menu
There you will most probably figure out how to install zips and stuff.
Baseband switching is an advanced task I'd say.
Things you probalby have to do first:
root > install 2ndinit > flash your zip and hope it's compatible
Good luck.
use defy baseband switcher
randolph2 said:
use defy baseband switcher
Click to expand...
Click to collapse
Does that work on stock roms as well? I don't think so.
Not everyone has CM or any other custom rom installed...
Hi guys! I have similar problem on my Defy+ (bl7), on every custom ROM I can make calls or use data for couple of hours, and then it suddenly stops. Only reboot helps, but not always. I tried switching basebands with bb switcher, not helping, also checked APN settings, tried flashing again and again and nothing helps.
Only thing i haven't tried is changing baseband version, from EPU93_U_00.60.00 (on custom ROM) to EPU93_U_00.60.03 (which i have on stock). But i have no idea how to do it! Any guesses?
Btw I'm from Croatia, mobile company VIP
Tnx
Related
guys pls help me, i try to install gingerxperiav12 with [META-INF,System,validate] inside the zip file it wont work i keep getting this message "this baseband is not compatible with this ROM update to baseband: M76XX-TSNCJOLYM-53404015"
but i have the same baseband
then i try to install XGin_5.0 and extracted it then XGin_5.0 folder comes and i put the folder inside xrecovery>backup in sdcard and XGin installed on my phone!
pls guys tell me why those roms with [META-INF,System,validate] inside the zip wont install? but the rom like XGin5.0 with 1 folder name XGin5.0 inside the zip can install
Jdionisio said:
guys pls help me, i try to install gingerxperiav12 with [META-INF,System,validate] inside the zip file it wont work i keep getting this message "this baseband is not compatible with this ROM update to baseband: M76XX-TSNCJOLYM-53404015"
but i have the same baseband
then i try to install XGin_5.0 and extracted it then XGin_5.0 folder comes and i put the folder inside xrecovery>backup in sdcard and XGin installed on my phone!
pls guys tell me why those roms with [META-INF,System,validate] inside the zip wont install? but the rom like XGin5.0 with 1 folder name XGin5.0 inside the zip can install
Click to expand...
Click to collapse
ok click here for a baseband collection. it might help you even though your baseband is xxx015 or higher. if you think you dont need to upgrade to another form of baseband then try booting into xrecovery and do a full wipe/factory reset.
hope it helped and i await any reply
wilbso said:
ok click here for a baseband collection. it might help you even though your baseband is xxx015 or higher. if you think you dont need to upgrade to another form of baseband then try booting into xrecovery and do a full wipe/factory reset.
hope it helped and i await any reply
Click to expand...
Click to collapse
hi sir i have xxx015 baseband so i think i dont need to update it, and i already did fullwipe/factory reset and still got the problem
Hello there,
As wilbso mentioned,you definitely need to upgrade your baseband, I think its matter of e15i, e16i compatibility, or theres certain slightly diff between within this 2 baseband, as I guess, both kernel is actually slghtly diff(w8 is made to play music longer-it did even with custom rom).. I got w8 and my gf is using x8.. I can see some diff..
Correct me if Im f**** wrong
Anyway bro, grab a flashtool, flash the x8(15i) baseband and you are ready to go!(since most rom are base on 15i and not very flexy excpt for gingerdx)
I did this, works flawlessly! xD
ok thank you for ur reply! im currently using XGin_5.0 android version 2.3.4 but the camera apps are bug, my baseband version M76XX-T5NCJOLYM-53404015 i already did the pc companion to update it by the way can you please guide me how to flash,thanks in advance!
Hi to all,
I am posting the link for a cwm as closest to stock for the european atrix (nordics greece), with bootloader unlocked, rooted, mem and battery fix. It's as close to stock with the aforementioned modifications. I thought this cwm
may be helpful to fruitcakes (they were missing the european ones) or anybody who want to revert to unlocked,rooted stock.
The process I followed was the following:
1. Flash from 2.3.6 based rom to stock 2.3.4 of the european sbf (nordics and greece) 1FF-olympus_emara-user-2.3.4-4.5.2A-74_OLE-31.20-release-keys-signed-NonEFIGSRetail-EU (kindly uploaded by haki.gr)
2. unlock (intl fix 1)
3. install romracer's cwm
4. rooting with root_cwm.img
5. memory fix with ramfix.img, and
6. battery fix with jug6 fix2.img
7. cwm full backup (including webtop) and upload
Information (reading from the phone)
System version 45.31.20.MB860.NonEGIGSRetail.en.EU
Android version 2.3.4
Baseband N_01.100.00R
Webtop WT-1.2.0-133_38
Kernel 2.6.32.9
Build number 4.5.2A-74_OLE-31.20
I can't post the link normally because I haven't reached 8 messages, but it is
at filefactory file 24tzdjygmy3z n Cwm-marmoras-stage1-2_3_4-en-eu_zip
(put www and com before and after filefactory and replace spaces with /)
Hope it is helpful
Hi, thanks for this. I tried installing using Koush CWM 5.0.2.0 and I get:
"Finding update package...
Opening update package...
Installing update package...
Installation aborted."
I'm running a euro atrix (originally t-mobile) SIM unlocked, rooted, currently on CM9 ROM.
Any ideas?
Thanks.
Hi Appy,
I tried to flash back, there was a system error, I think I messed up the recovery process. Just to be safe, I will remove the file, redo it, and post an MD5 (just in case of corrupt files).
I don't know if it makes any difference that I used the romracers.
brilliant. thanks a lot!
Hi
Could you send me this fruitcake?
thx
marmoras said:
Hi to all,
I am posting the link for a cwm as closest to stock for the european atrix (nordics greece), with bootloader unlocked, rooted, mem and battery fix. It's as close to stock with the aforementioned modifications. I thought this cwm
may be helpful to fruitcakes (they were missing the european ones) or anybody who want to revert to unlocked,rooted stock.
The process I followed was the following:
1. Flash from 2.3.6 based rom to stock 2.3.4 of the european sbf (nordics and greece) 1FF-olympus_emara-user-2.3.4-4.5.2A-74_OLE-31.20-release-keys-signed-NonEFIGSRetail-EU (kindly uploaded by haki.gr)
2. unlock (intl fix 1)
3. install romracer's cwm
4. rooting with root_cwm.img
5. memory fix with ramfix.img, and
6. battery fix with jug6 fix2.img
7. cwm full backup (including webtop) and upload
Information (reading from the phone)
System version 45.31.20.MB860.NonEGIGSRetail.en.EU
Android version 2.3.4
Baseband N_01.100.00R
Webtop WT-1.2.0-133_38
Kernel 2.6.32.9
Build number 4.5.2A-74_OLE-31.20
I can't post the link normally because I haven't reached 8 messages, but it is
at filefactory file 24tzdjygmy3z n Cwm-marmoras-stage1-2_3_4-en-eu_zip
(put www and com before and after filefactory and replace spaces with /)
Hope it is helpful
Click to expand...
Click to collapse
download link not working
hi and thank you,
You did an excellent thing for lots of European atrix users!
I'd really like to downoad and install your ROM but the link is not working.
Could you please reupload and post the new link, using the same method, with spaces?
Thank you and best regards!
marmoras said:
Hi to all,
I am posting the link for a cwm as closest to stock for the european atrix (nordics greece), with bootloader unlocked, rooted, mem and battery fix. It's as close to stock with the aforementioned modifications. I thought this cwm
may be helpful to fruitcakes (they were missing the european ones) or anybody who want to revert to unlocked,rooted stock.
The process I followed was the following:
1. Flash from 2.3.6 based rom to stock 2.3.4 of the european sbf (nordics and greece) 1FF-olympus_emara-user-2.3.4-4.5.2A-74_OLE-31.20-release-keys-signed-NonEFIGSRetail-EU (kindly uploaded by haki.gr)
2. unlock (intl fix 1)
3. install romracer's cwm
4. rooting with root_cwm.img
5. memory fix with ramfix.img, and
6. battery fix with jug6 fix2.img
7. cwm full backup (including webtop) and upload
Information (reading from the phone)
System version 45.31.20.MB860.NonEGIGSRetail.en.EU
Android version 2.3.4
Baseband N_01.100.00R
Webtop WT-1.2.0-133_38
Kernel 2.6.32.9
Build number 4.5.2A-74_OLE-31.20
I can't post the link normally because I haven't reached 8 messages, but it is
at filefactory file 24tzdjygmy3z n Cwm-marmoras-stage1-2_3_4-en-eu_zip
(put www and com before and after filefactory and replace spaces with /)
Hope it is helpful
Click to expand...
Click to collapse
Plse repost file somewhere
laurnem said:
hi and thank you,
You did an excellent thing for lots of European atrix users!
I'd really like to downoad and install your ROM but the link is not working.
Could you please reupload and post the new link, using the same method, with spaces?
Thank you and best regards!
Click to expand...
Click to collapse
Please Repost or contact I also neeed this urgently
EU fruitcake available here since three months ago: http://forum.xda-developers.com/showthread.php?t=1926072
I am have rooted my phone installed 2init i tried installing cm7 update-cm-7.1.0-jordan-signed but wen i get into custom recovery and select install from ad card i get an error sayin cannot mount sd card. Wats wrong am i doin it wrong...plz help
Sent from my MB525 using XDA
Same issue here...(although I think I have a red lens defy).
Here are the specs of my phone:
System version: Moto_version.2.51.1.MB525.Retail.en.GB
Model number: MB525
Firmware version: 2.1-update
Baseband version: EPU93ST2_U_03.0A.01
Kernel version: 2.6.29 [email protected] #1
BPflex version: UCAJRDNEMARAB1B80AA030.0R
APflex version: GAS_EMEA_UCAJORDANRTEU_P048
Build number: JRDNEM_U3_2.51.1
A clue can be found here: http://forum.xda-developers.com/showthread.php?t=1032212
Q: I can't flash from recovery, I get an sdcard mount error.
A: It seems to be related with phone's who are using version 2.51. To solve, try to flash any recent SBF file. If you want to do a nandroid first, check if SD Recovery works for you.
Click to expand...
Click to collapse
So the SDcard problem seems to originate from the version. The solution which has been provided is to flash any recent SBF file. This is where I am stuck at present.
1)What SBF file is recommendable?
2) is it really required to do take a nandroid image?
Perhaps something to mention: I am working without phone SIM and with a 2 GB Kingston SD card.
Flash a froyo ROM, root and instal 2nt init. Best a non blur ROM (then you don't have to register)
If you don't want to go to eclair (void warranty, official upgrade for your country) you don't have use nand. Nordic is a good choose.
Sent from my MB525 using XDA
Hi,
thanks for the reply, greatly appreciated. No, I don't want to go back to eclair, since I do not have any warranty anymore....
Where can the ROMs be obtained? I stumbled onto the website as provided by Moto defy a beginners guide (grrr, I cannot provide URL's here) where a whole list of SBFs are given.
However, Nordic seems to be a Gingerbread SBF? Which one to pick in order to get CM working?
Thanks! TY
Problem has been solved.
I updated the phone with Motorola update manager to version 2.2.1.
After the update, the installation of CM worked perfect.
Regards, TY
Hello,
I own GT - I9000 with STOCK ROM exactly this one (2.3.6 TMZ - Baseband i9000XXJW4; and Build number - gingerbread.BOJW6)
And I wanna root and flash from stock to custom rom (CM9).
Before posting I tried to root my SGS by SuperOneClick 2.3.3, however it stopped in the step 7. And now I would like to use ODIN for this. But I will do this once and I dont want to make hard brick from my phone. I am confused in this terms like PDA,CSC atc. And I dont know where to find new ones.
It´s possible to join files to this thread for ODIN for rooting and flashing?
It´s needed to upload new kernel, baseband (PDA,CSC and so on) on the phone?
Please would you mind to clear this issue up for me?
Thank you very much.
MM
Please help me, I am beginner in this trouble...
user 1234 said:
Hello,
I own GT - I9000 with STOCK ROM exactly this one (2.3.6 TMZ - Baseband i9000XXJW4; and Build number - gingerbread.BOJW6)
And I wanna root and flash from stock to custom rom (CM9).
Before posting I tried to root my SGS by SuperOneClick 2.3.3, however it stopped in the step 7. And now I would like to use ODIN for this. But I will do this once and I dont want to make hard brick from my phone. I am confused in this terms like PDA,CSC atc. And I dont know where to find new ones.
It´s possible to join files to this thread for ODIN for rooting and flashing?
It´s needed to upload new kernel, baseband (PDA,CSC and so on) on the phone?
Please would you mind to clear this issue up for me?
Thank you very much.
MM
Please help me, I am beginner in this trouble...
Click to expand...
Click to collapse
I am in it too. Try this, it might help :
http://forum.xda-developers.com/showthread.php?t=1101534
Q&A for [ROM][I9505][XXUGNH7][18/09][SLIM][FAST] ► BHP ROM - V12 Q7 ◄
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][I9505][XXUGNH7][18/09][SLIM][FAST] ► BHP ROM - V12 Q7 ◄. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
cmkmagic said:
i have a slow charging problem using this rom
Click to expand...
Click to collapse
Go in Kernelsettings and change to 1900 mah:good:
same questions as any others rom freaks, when will new updates be released, want to know if this rom will get updates before i will first install it.
Bhp espelho
I love your ROM being, however the server drive always gives error when downloading, upa by MEGA or another server. Sorry my English'm BRAZIL and Usso the google translator. Congratulations on your work!
Download BHP
I can never download the rom by this provider, kindly upa by MEGA! congratulations for the work!
thnx bro ^_^
5.0
BHP 2.0 TDI
Quote:
Originally Posted by jomar_uk
Same problem sadly. @ISF
I noticed before I had a chance to select language it defaulted to german and the sim pin code option. I could not enter anything at all. Pressing back space did not take me to the language option just the sim code option appeared to be in a translucent box but not able to input anything.
Full wipe again and left options at default in aroma, same outcome. Jumped straight over language sekection to sim pin selection. Perhaps will try later on another version.
I had the same problem download the rom again and flash it and everything is working fine.
Ps I Kant reply in a developer forum jet
edp_ said:
BHP 2.0 TDI
Quote:
Originally Posted by jomar_uk
Same problem sadly. @ISF
I noticed before I had a chance to select language it defaulted to german and the sim pin code option. I could not enter anything at all. Pressing back space did not take me to the language option just the sim code option appeared to be in a translucent box but not able to input anything.
Full wipe again and left options at default in aroma, same outcome. Jumped straight over language sekection to sim pin selection. Perhaps will try later on another version.
I had the same problem download the rom again and flash it and everything is working fine.
Ps I Kant reply in a developer forum jet
Click to expand...
Click to collapse
Thanks for noticing me!
Sent from my GT-I9505 using Tapatalk
UPSM
@ISF Will you add UPSM in your 4.4.4 rom?
tooomins said:
@ISF Will you add UPSM in your 4.4.4 rom?
Click to expand...
Click to collapse
I will try, mate.
bhp rom 3.0 final
The best rom .. only thing i am missing are profiles .. )
Thanks for the great work!
Well, I already have the previous version installed on my device, I install this update with factory reset?
maxov777 said:
The best rom .. only thing i am missing are profiles .. )
Click to expand...
Click to collapse
https://www.dropbox.com/sh/dfxkt7d1dogv1xl/AACwgQfO61k4KnI-lH52ENnna?dl=0
Copy these 3 profiles into sdcard KTweaker/Profiles folder.
---------- Post added at 02:14 AM ---------- Previous post was at 02:12 AM ----------
manoelnsn said:
Thanks for the great work!
Well, I already have the previous version installed on my device, I install this update with factory reset?
Click to expand...
Click to collapse
Hello, thank you for the feedback!
Well, not really. You can flash it without Full Wipe.
I do recommend a Full Wipe since it fixes a lot of bugs and it's better to start with a clean everytime.
SD card , internal storage
Hello ..
i hope that this is stupid question .. but .. when i create folder in titanium backup on sd card , to store the backup apk , i can not see this folder in my computer when i use the stupid samsung access .. but i can see the folder with ES file explorer ..
what might be the problem ??
folder is readable, writable , no hidden ,
maxov777 said:
Hello ..
i hope that this is stupid question .. but .. when i create folder in titanium backup on sd card , to store the backup apk , i can not see this folder in my computer when i use the stupid samsung access .. but i can see the folder with ES file explorer ..
what might be the problem ??
folder is readable, writable , no hidden ,
Click to expand...
Click to collapse
Well, check if the folder has got a dot in front of it like so : .TitaniumBackup . If it does, delete the point by renaming the folder and you will be able to see it. BTW, I use Wi-Fi File Explorer to transfer files from my phone to pc. It's faster and more stable.
Here you got the app. Sorry for late reply, I'm busy with the high school. I would also like to thank you for your donation!
https://play.google.com/store/apps/details?id=com.dooblou.WiFiFileExplorer
all ok now
Somehow , somewhere ,, the folders started to appear on computer .. i tell you this Samsung .. crazy people ..
thanks for reply .. and good luck in school ..
No Network Signal after flashing
Hi good day!
Im a new user of SGS4 i9505.
My set-up before flashing this ROM is this:
MIUI 4.11.3 (4.4.2)
Original CSC: BTU
Firmware's CSC: TGY
Active CSC: BTU/TGY
CSC Country: Hongkong
Bootloader: I9505XXUFNAD
Baseband: I9505ZHUFNB3
PDA Version: I9505ZHUFNB3
Build number: KOT49H.I9505ZHUFNB3
On aroma installer, I selected XTE (Philippines) as CSC.
After flashing the rom and rebooting, I didn't have any network signal and the menu on Settings is greyed out.
Does it have something to do with the CSC I selected? Sorry for the noob question but I cant seem to figure it out.
arvinqd061914 said:
Hi good day!
Im a new user of SGS4 i9505.
My set-up before flashing this ROM is this:
MIUI 4.11.3 (4.4.2)
Original CSC: BTU
Firmware's CSC: TGY
Active CSC: BTU/TGY
CSC Country: Hongkong
Bootloader: I9505XXUFNAD
Baseband: I9505ZHUFNB3
PDA Version: I9505ZHUFNB3
Build number: KOT49H.I9505ZHUFNB3
On aroma installer, I selected XTE (Philippines) as CSC.
After flashing the rom and rebooting, I didn't have any network signal and the menu on Settings is greyed out.
Does it have something to do with the CSC I selected? Sorry for the noob question but I cant seem to figure it out.
Click to expand...
Click to collapse
Good day to you too. You have to update your bootloader to latest one, I think it's NK4, and also flash the latest modem. I have a tutorial on YouTube on how to update the modem. It's called how to fix Galaxy s4 Wi-Fi on my channel down below in my signature.
Updating the bootloader will most likely wipe all your SD card and data, so make a backup first.
You can get the latest bootloader and modem by searching on Google, Galaxy S4 Modem and enter the first link and find the latest one of them out there with a simple thread search. Flashing bootloader has the same process in Odin as the modem, but instead of selecting the. Tar in Phone section you put it on BL or Bootloader, it depends on your Odin version.
If you have further questions please let me know.
No Network Signal
ISF said:
Good day to you too. You have to update your bootloader to latest one, I think it's NK4, and also flash the latest modem. I have a tutorial on YouTube on how to update the modem. It's called how to fix Galaxy s4 Wi-Fi on my channel down below in my signature.
Updating the bootloader will most likely wipe all your SD card and data, so make a backup first.
You can get the latest bootloader and modem by searching on Google, Galaxy S4 Modem and enter the first link and find the latest one of them out there with a simple thread search. Flashing bootloader has the same process in Odin as the modem, but instead of selecting the. Tar in Phone section you put it on BL or Bootloader, it depends on your Odin version.
If you have further questions please let me know.
Click to expand...
Click to collapse
Even if the wifi is working, is that still my problem?