guys pls help me, i try to install gingerxperiav12 with [META-INF,System,validate] inside the zip file it wont work i keep getting this message "this baseband is not compatible with this ROM update to baseband: M76XX-TSNCJOLYM-53404015"
but i have the same baseband
then i try to install XGin_5.0 and extracted it then XGin_5.0 folder comes and i put the folder inside xrecovery>backup in sdcard and XGin installed on my phone!
pls guys tell me why those roms with [META-INF,System,validate] inside the zip wont install? but the rom like XGin5.0 with 1 folder name XGin5.0 inside the zip can install
Jdionisio said:
guys pls help me, i try to install gingerxperiav12 with [META-INF,System,validate] inside the zip file it wont work i keep getting this message "this baseband is not compatible with this ROM update to baseband: M76XX-TSNCJOLYM-53404015"
but i have the same baseband
then i try to install XGin_5.0 and extracted it then XGin_5.0 folder comes and i put the folder inside xrecovery>backup in sdcard and XGin installed on my phone!
pls guys tell me why those roms with [META-INF,System,validate] inside the zip wont install? but the rom like XGin5.0 with 1 folder name XGin5.0 inside the zip can install
Click to expand...
Click to collapse
ok click here for a baseband collection. it might help you even though your baseband is xxx015 or higher. if you think you dont need to upgrade to another form of baseband then try booting into xrecovery and do a full wipe/factory reset.
hope it helped and i await any reply
wilbso said:
ok click here for a baseband collection. it might help you even though your baseband is xxx015 or higher. if you think you dont need to upgrade to another form of baseband then try booting into xrecovery and do a full wipe/factory reset.
hope it helped and i await any reply
Click to expand...
Click to collapse
hi sir i have xxx015 baseband so i think i dont need to update it, and i already did fullwipe/factory reset and still got the problem
Hello there,
As wilbso mentioned,you definitely need to upgrade your baseband, I think its matter of e15i, e16i compatibility, or theres certain slightly diff between within this 2 baseband, as I guess, both kernel is actually slghtly diff(w8 is made to play music longer-it did even with custom rom).. I got w8 and my gf is using x8.. I can see some diff..
Correct me if Im f**** wrong
Anyway bro, grab a flashtool, flash the x8(15i) baseband and you are ready to go!(since most rom are base on 15i and not very flexy excpt for gingerdx)
I did this, works flawlessly! xD
ok thank you for ur reply! im currently using XGin_5.0 android version 2.3.4 but the camera apps are bug, my baseband version M76XX-T5NCJOLYM-53404015 i already did the pc companion to update it by the way can you please guide me how to flash,thanks in advance!
Related
guys i really need help about my phone
Mobile number: SO-10B
Baseband 2.0.52 (i forgot sorry) im currently stock in se logo
everytime i root using flashtool 0.2.0.8 and install bussybox and xrecovery then flash JIT i always stock on SE logo even i try many times. im so sad this phone if i didn't install JIT. what wrong my device? it will need a right tool for rooting? everytime i root always they have a red message like didn't expect need to ro.build.prop ect. guys anyone here using my same device NTT docomo S0-10B from japan please tell me the right the right step
Maybe try flashing to a global generic firmware then install JIT? I'm not sure whether the JIT mod would work on the Japanese firmware.
aR_ChRiS said:
Maybe try flashing to a global generic firmware then install JIT? I'm not sure whether the JIT mod would work on the Japanese firmware.
Click to expand...
Click to collapse
i dont want to flash im afraid what causing my phone aside in stock in SE LOGO any suggestion?
EDIT: if i flash this using other firwmware what firmware should i choose? and even im on other firmware im able to updgrade to 2.3 this coming update form sony?
please anyone? or some help from pinoy, pilipino here.
When you install or add new tweaks to the phone.. first you should make a nand backup of the Rom. did you install the Xrecovery? because there are 2 .ZIP which allows you to install or remove the JIT. try to find thoose zip and remove to see if it works. and remember to always make a backup to prevent to flash the device again and loose everything
yes i install xrecovery the latest one. i do some search but i dont if this true JIT is not compatible with mobile number SO-10B is this true?
DO NOT install JiT if its already installed, it will break your FW and you will need to reflash. Flash global generic and try again. Only try and install one time, the only way you'll know its installed is by benchmark score improvements.
Sent From My *Super Fly X10*
If I (or anyone for that matter!) help you, dont be afraid to press THANKS!
"wipe dalvik cache" after installing jit.
thank you for reply sir CMoney87 and OmegaRED^ @OmegaRED but i did "wipe dalvik cache" right after i flash JIT.
@CMoney87 that my problem sir after i flash JIT im stock in SE logo and about flash i dont know what the right firmware for my device to flash without bricking or stock in SE LOGO again can you choose firmware for me in this thread? http://forum.xda-developers.com/showpost.php?p=10879519&postcount=2
sorry for my super newbie im new in xperia x10 i came from wildfire.
EDIT: X10i_2.1.A.435_GLOBAL-GGL GENERIC this one can flash in my device? or this? Generic version 2.1update1 build 2.0.2.A.0.24 please tell me if choose is wrong.
gAracUh said:
thank you for reply sir CMoney87 and OmegaRED^ @OmegaRED but i did "wipe dalvik cache" right after i flash JIT.
@CMoney87 that my problem sir after i flash JIT im stock in SE logo and about flash i dont know what the right firmware for my device to flash without bricking or stock in SE LOGO again can you choose firmware for me in this thread? http://forum.xda-developers.com/showpost.php?p=10879519&postcount=2
sorry for my super newbie im new in xperia x10 i came from wildfire.
EDIT: X10i_2.1.A.435_GLOBAL-GGL GENERIC this one can flash in my device? or this? Generic version 2.1update1 build 2.0.2.A.0.24 please tell me if choose is wrong.
Click to expand...
Click to collapse
well honestly i would choose this "2.1_2.0.2.A.0.24 with DualTouch already in HERE just need to flash once" and then install a custom firmware because i believe they already have jit installed (but please correct me if im wrong)..
http://forum.xda-developers.com/showthread.php?t=1085918
this is my personal favorite but look around see what u like.
gAracUh said:
thank you for reply sir CMoney87 and OmegaRED^ @OmegaRED but i did "wipe dalvik cache" right after i flash JIT.
@CMoney87 that my problem sir after i flash JIT im stock in SE logo and about flash i dont know what the right firmware for my device to flash without bricking or stock in SE LOGO again can you choose firmware for me in this thread? http://forum.xda-developers.com/showpost.php?p=10879519&postcount=2
sorry for my super newbie im new in xperia x10 i came from wildfire.
EDIT: X10i_2.1.A.435_GLOBAL-GGL GENERIC this one can flash in my device? or this? Generic version 2.1update1 build 2.0.2.A.0.24 please tell me if choose is wrong.
Click to expand...
Click to collapse
Definitely global generic 2.1.A.0.435. It is newer and has dualtouch, and you will be certain to get the official 2.3.3 Gingerbread update directly from PC Companion or SEUS when available.
On Japanese fw jit cant work correctly.
If you wanna use jit on Japanese fw,you must use goro's.
Search with google in Japanese.
Then you'll find it soon
Sent from my SO-01B using XDA App
no jit in japan?? bruutal
thank you all for reply and information this will help me a lot thanks again.
If your gonna flash new FW and root you might as well install a custom ROM. All custom ROMs have JiT enabled so if you go custom DO NOT, under any circumstance, try and install JiT.
Sent From My *Super Fly X10*
If I (or anyone for that matter!) help you, dont be afraid to press THANKS!
One more question about before flashing. my device is came form japan S0-10B and now im going to shop to unlock this to use my simcard because im here in philippines. after the unlocking this phone and flash the unlock will gone? or not?
gAracUh said:
One more question about before flashing. my device is came form japan S0-10B and now im going to shop to unlock this to use my simcard because im here in philippines. after the unlocking this phone and flash the unlock will gone? or not?
Click to expand...
Click to collapse
I think they are separate. You won't lost your sim-unlock once you have flashed your phone.
that's i think too thanks for info. thanks again.
right i have unlocked the bootloader and put on custom recovery but now i aint even had the chance to put on custom android and the usb wont reconise the sd card when plugged into the pc plus my camera dont work and now my market dont work help me out please i didnt think putting a custom recovery or unlocking the bootloader result in faulty cam etc . but sayng tht everything was working fine until i put the custom recovery onto the play
What recovery ( kernel ) did you flash and which version of Sony software are you on
Sent from my LT15i using XDA App
IF i were you I would FTF new firmware
and re-try
you probably made an mistake
hiya
Thanks for the reply yes I did do something wrong I've installed it fine now but the cam don't work everything else do. Is there a fix for this It says I've got a update but when I click on it my phone ain't. Listed
hiya heres whats on my system at the mo mate . kernel version 2.6.32.9fxp [email protected]#6. android version 2.3.7 mod version cyanogenmod 7.1.0.2 . build number 3.0.1.a.0.145 hope this helps mate as ive got it working but my cam dont work. and ive got a rom upgrade but everytime i click it its asking me for the model of the phone but my model aint in the list what do i do
Hello,
I own GT - I9000 with STOCK ROM exactly this one (2.3.6 TMZ - Baseband i9000XXJW4; and Build number - gingerbread.BOJW6)
And I wanna root and flash from stock to custom rom (CM9).
Before posting I tried to root my SGS by SuperOneClick 2.3.3, however it stopped in the step 7. And now I would like to use ODIN for this. But I will do this once and I dont want to make hard brick from my phone. I am confused in this terms like PDA,CSC atc. And I dont know where to find new ones.
It´s possible to join files to this thread for ODIN for rooting and flashing?
It´s needed to upload new kernel, baseband (PDA,CSC and so on) on the phone?
Please would you mind to clear this issue up for me?
Thank you very much.
MM
Please help me, I am beginner in this trouble...
user 1234 said:
Hello,
I own GT - I9000 with STOCK ROM exactly this one (2.3.6 TMZ - Baseband i9000XXJW4; and Build number - gingerbread.BOJW6)
And I wanna root and flash from stock to custom rom (CM9).
Before posting I tried to root my SGS by SuperOneClick 2.3.3, however it stopped in the step 7. And now I would like to use ODIN for this. But I will do this once and I dont want to make hard brick from my phone. I am confused in this terms like PDA,CSC atc. And I dont know where to find new ones.
It´s possible to join files to this thread for ODIN for rooting and flashing?
It´s needed to upload new kernel, baseband (PDA,CSC and so on) on the phone?
Please would you mind to clear this issue up for me?
Thank you very much.
MM
Please help me, I am beginner in this trouble...
Click to expand...
Click to collapse
I am in it too. Try this, it might help :
http://forum.xda-developers.com/showthread.php?t=1101534
Hello All,
I want install the BaseBand EPU93_U_00.59.01 on my Defy for star to unlock it, I have the EPU93_U_00.59.00 dhgt, If I am not wrong, just need put the baseband zip file on SdCard and reboot in recovery mode and install from SdCard ?
But I can only installing update.zip file from my sdcard and chose an other file ? like the picture, and I test to rename the BaseBand file to update file but not work ?
View attachment 1378400
where is my error pls ?
Best Regards,
Pedroleroi.
u need to root and use baseband switcher app
Sent from my MB526 using xda premium
Please ask all questions in Q&A. Thread moved there.
tks to all, there is the picture of my recovery mode :
View attachment 1379991
and I forget to give the information, but sure my phone is rooted,
@ nogoodusername
can you give me more information or link pls ?
Best Regards,
Pedroleroi.
if you want to flash a zip you have to reboot into custom recovery. you are in stock recovery.
if you didn't install cwm, you have to do that first. a start would be to read the beginners guide. (sticky in general section). good luck.
@ measel
can you give me more information pls ?
Best Regards,
Pedroleroi.
Read this for educational purposes (it explains about flashing, rooting and so on...):
ALLINONEBEGINERSGUIDE: http://forum.xda-developers.com/showthread.php?t=1216982
WIKI: http://forum.xda-developers.com/wiki/Motorola_Defy
especially here: http://forum.xda-developers.com/wik...rt_the_2ndinitdefy_bootloader.2Frecovery_menu
There you will most probably figure out how to install zips and stuff.
Baseband switching is an advanced task I'd say.
Things you probalby have to do first:
root > install 2ndinit > flash your zip and hope it's compatible
Good luck.
use defy baseband switcher
randolph2 said:
use defy baseband switcher
Click to expand...
Click to collapse
Does that work on stock roms as well? I don't think so.
Not everyone has CM or any other custom rom installed...
Hi guys! I have similar problem on my Defy+ (bl7), on every custom ROM I can make calls or use data for couple of hours, and then it suddenly stops. Only reboot helps, but not always. I tried switching basebands with bb switcher, not helping, also checked APN settings, tried flashing again and again and nothing helps.
Only thing i haven't tried is changing baseband version, from EPU93_U_00.60.00 (on custom ROM) to EPU93_U_00.60.03 (which i have on stock). But i have no idea how to do it! Any guesses?
Btw I'm from Croatia, mobile company VIP
Tnx
hey ,
i have i9500 galaxy s4 4.4.2 . yesterday i flashed by mistake [my stupidity...] the non latestest stock rom , with the maxfour v15 kernel - which went fine , but after that i had no signal.
now i flashed the latest stock rom which is - I9500XXUGNH4_I9500OJKGNI1_I9500JKUGNH1_HOME.tar.md5.
my imei match the imei number behaind the battery , and when i search for networks , i find my carrier , but i try to connect it says "not registered on network".
i had an imei not match problem in the past with the same current phone .
what do i need to do ?
flash a new model ? , what modem do i need ? [i from israel if it matters]
please help me ! im desperate!
Flash the same firmware again. Probably not all parts of the firmware were updated.
Sent from my black pearl using Tapatalk
I flashed the 4.4.2 newest stock kernel three times .
no change/...
please help !!! :crying::crying:
[email protected] said:
I flashed the 4.4.2 newest stock kernel three times .
no change/...
please help !!! :crying::crying:
Click to expand...
Click to collapse
bro first of all relax and download any custom rom and flash it via recovery say cynogenmod etc..then let it start and check whether you can connect to network if its fine then your hardware is perfectly safe and goahead with flashing the stock rom you downloaded (consider redownloading it to be sure) and flash it and you would be fine
Kushan02 said:
bro first of all relax and download any custom rom and flash it via recovery say cynogenmod etc..then let it start and check whether you can connect to network if its fine then your hardware is perfectly safe and goahead with flashing the stock rom you downloaded (consider redownloading it to be sure) and flash it and you would be fine
Click to expand...
Click to collapse
how will flashing a costum cynogenmod rom will fix this problem?
[email protected] said:
how will flashing a costum cynogenmod rom will fix this problem?
Click to expand...
Click to collapse
because installing a custom rom by fully formatting phone will delete any corrupted files that are causing the error and when you will flash the official rom it will intsall as a new clean rom and will work without any problem
Kushan02 said:
because installing a custom rom by fully formatting phone will delete any corrupted files that are causing the error and when you will flash the official rom it will intsall as a new clean rom and will work without any problem
Click to expand...
Click to collapse
i installed the cynogenmod rom [now i have 4.4.4] . problem NOT resolved.
my imei is good . i really dont know what is the problem ... please help me !