Database Users

[Q] Sound problem I9595 BlackEdition - Omega v33

Hello everybody,
i just put the a custom rom for the first time and i am actually really happy with this rom.
My friend called me 1h ago, so i noticed that i am hearing my friend fine, but the problem is that he cant hear me.
I tested it with the audio capture and it just sound messy.
Here are all the information:
Omega v33 - XXUGNF1
Android Version 4.4.2
Modellnummer: GT-19505 Black Edition
Basisbandversion I9505XXUGNF1
Kernel:3.4.0-talexop-2+-gb4fe160-dirty
[email protected]#4
I just tried it with the 3.4.0-Adam-2.3, but it is not working, too.
Did i install something wrong?
So which kernel is the right one for me to get the sound problem fixed?

varity said:
Hello everybody,
i just put the a custom rom for the first time and i am actually really happy with this rom.
My friend called me 1h ago, so i noticed that i am hearing my friend fine, but the problem is that he cant hear me.
I tested it with the audio capture and it just sound messy.
Here are all the information:
Omega v33 - XXUGNF1
Android Version 4.4.2
Modellnummer: GT-19505 Black Edition
Basisbandversion I9505XXUGNF1
Kernel:3.4.0-talexop-2+-gb4fe160-dirty
[email protected]#4
I just tried it with the 3.4.0-Adam-2.3, but it is not working, too.
Did i install something wrong?
So which kernel is the right one for me to get the sound problem fixed?
Click to expand...
Click to collapse
Hi ,
That problem most of the times is modem related , go Omega files /modem flash the same one again or upgrade it to the newest , follow instructions to do it
As shown in OP of Omega V33
Installation:
1. Backup your device (nadroid backup, titanium backup, efs backup ... etc) and save the backup to a safe place.
2. Flash the new bootloder and modems with odin
Bootloader -> BL_I9505XXUFNAD_481100_REV06_user_low_ship_MULTI_C ERT.tar.md5
If you already have the new Kit Kat bootloader there is no need to flash it again.
Modems XXUFNC9 -> I9505XXUFNC9_GSM_LTE_Modems.tar
Power off device completely, then boot to download mode and flash bootloader (if needed) and modems with odin
Then boot to android and check if the new modem XXUFNC9 flashed ok (if wifi is not working is normal)
3. Boot to Recovery --recommended TWRP, get the latest version from here -> http://teamw.in/project/twrp2/182--
and flash Omega and then boot to android.
You can flash without full wipe if you are coming from a previous Omega Kit Kat version, if not then flash with full wipe
PLEASE FOLLOW THE EASY INSTALLATION INSTRUCTIONS ELSE YOU WILL HAVE VARIOUS ISSUES!
BACKUP FIRST !!

I flashed the LTE_Modem_I9595XXUGNF1 again, but it is still the same problem.
Can i test an older one without any problems, or do you know anything else to solve my problem?

varity said:
I flashed the LTE_Modem_I9595XXUGNF1 again, but it is still the same problem.
Can i test an older one without any problems, or do you know anything else to solve my problem?
Click to expand...
Click to collapse
Mate ,
You have a I9505 or a I9595??

MAX 404 said:
Mate ,
You have a I9505 or a I9595??
Click to expand...
Click to collapse
pardon mistyped. I9505 is the right one.

varity said:
pardon mistyped. I9505 is the right one.
Click to expand...
Click to collapse
You can try with an older one if you wish and see if it helps , did you flash the GSM modem also?

MAX 404 said:
You can try with an older one if you wish and see if it helps , did you flash the GSM modem also?
Click to expand...
Click to collapse
Yes i installed both. I will try some of the LTE/GSM modems now.

I still have the microphone issue.
I Updated the baseband (GSM+LTE) to the newest I9505XXUGNF1, but i cant fix this microphone problem. It sounds like it is raining or something like the television where u cant get a programm.
I searched now about 5hours, but this is something i cant get fixed.
Please anyone here who can help with this issue?

[Q] Help Wifi Stuck turning on

Guys i having trouble with my note 3 wifi
i can tell that is stuck because it cant turn on
here is the problem
lately i was in flashing stockrom based NC1 from VN rom v14 because i was trying to
reset knox counter to 0 it did work , no problem at all even the knox is work perfectly. the problem start from auto
update software the samsung given, after update software the based change to NF1 so on NG1
there said to update again some security certificate.
arter that, buffff my phone cant turn on wifi
Please help i need to use wifi for my entire connection

stevensunshine said:
Guys i having trouble with my note 3 wifi
i can tell that is stuck because it cant turn on
here is the problem
lately i was in flashing stockrom based NC1 from VN rom v14 because i was trying to
reset knox counter to 0 it did work , no problem at all even the knox is work perfectly. the problem start from auto
update software the samsung given, after update software the based change to NF1 so on NG1
there said to update again some security certificate.
arter that, buffff my phone cant turn on wifi
Please help i need to use wifi for my entire connection
Click to expand...
Click to collapse
Wifi well get stuck or well refuse to turn on if you have the wrong radio installed. You'll need a firmware and baseband that works with each other for wifi/data/cellular to work. I would reflash the Baseband

Dizy801 said:
Wifi well get stuck or well refuse to turn on if you have the wrong radio installed. You'll need a firmware and baseband that works with each other for wifi/data/cellular to work. I would reflash the Baseband
Click to expand...
Click to collapse
hey thanks a lot for the answer, did you midn to teach me in tutorial please

Flash a fresh firmware using ODIN or Flash a rom of your choice in recovery. It should update your baseband. Make sure its region free or made for your region. I myself have never flashed it on my Note 3. But wifi being stuck has happened to me on countless different phones and it all points the the baseband/radio installed.

stevensunshine said:
Guys i having trouble with my note 3 wifi
i can tell that is stuck because it cant turn on
here is the problem
lately i was in flashing stockrom based NC1 from VN rom v14 because i was trying to
reset knox counter to 0 it did work , no problem at all even the knox is work perfectly. the problem start from auto
update software the samsung given, after update software the based change to NF1 so on NG1
there said to update again some security certificate.
arter that, buffff my phone cant turn on wifi
Please help i need to use wifi for my entire connection
Click to expand...
Click to collapse
Ah..Are you on vn rom v14? And then flashed stock rom?And which note3 do you have?
Sent from my SM-N900 using Tapatalk

Dizy801 said:
Flash a fresh firmware using ODIN or Flash a rom of your choice in recovery. It should update your baseband. Make sure its region free or made for your region. I myself have never flashed it on my Note 3. But wifi being stuck has happened to me on countless different phones and it all points the the baseband/radio installed.
Click to expand...
Click to collapse
i've done it, didnt work, any other ideas?

meetpatel said:
Ah..Are you on vn rom v14? And then flashed stock rom?And which note3 do you have?
Sent from my SM-N900 using Tapatalk
Click to expand...
Click to collapse
my note is sm-n900, indonesian region, did you have similar problem?
pls tell me how to fix it T.T
i've flashed the latest modem file, also didnt work
reflash with .pit file also didnt work
the last thing i wanna try is flashing JB rom and hope it fixed everything

stevensunshine said:
my note is sm-n900, indonesian region, did you have similar problem?
pls tell me how to fix it T.T
i've flashed the latest modem file, also didnt work
reflash with .pit file also didnt work
the last thing i wanna try is flashing JB rom and hope it fixed everything
Click to expand...
Click to collapse
Just flash N900_XXUENE1 modem file. 99% it will fix your problem. If you need that modem pm me.
Don't forget to hit tnx![emoji4]
Sent from my SM-N900 using Tapatalk

stevensunshine said:
my note is sm-n900, indonesian region, did you have similar problem?
pls tell me how to fix it T.T
i've flashed the latest modem file, also didnt work
reflash with .pit file also didnt work
the last thing i wanna try is flashing JB rom and hope it fixed everything
Click to expand...
Click to collapse
You can also flash your country's latest firmware.first try flashing latest firmware and if problem is still there then try flashing modem.
Sent from my SM-N900 using Tapatalk

my note 3 wifi and bluetooth is stuck on turning on
this afternoon i noticed that my wifi and bluetooth is stuck on turning on , i tried resetting it , doing a battery pull but the problem still happens , please can someone help me ? i am also trying to flash my phone to 5.0 firmware incase this is a bug but odin givens me an error saying NAND .write faied

N910g unresponsive after flashing Dr.Ketan ROM I N5 Port seandroid error

Hello,
I tried flashing my n910g with "Dr.Ketan ROM I N5 Port I Full Theme store support I S6 Edge features L12" ROM.
After flashing, I also flashed the bootloader and modem mentioned by Dr.Ketan. The phone is stuck at the bootscreen with an error seandroid.
RECOVERY BOOTING Recovery is NOT SEANDROID ENFORCING Set Warrenty Bit. I used cwm recovery before flashing my ROM and my phone was already rooted with cf autoroot before flashing this rom.
I wanted to try this rom in my phone and I'm a noob. Can somebody please help me with this ? It'd be a great favor.
I'm a noob, please help me with the appropriate files/instructions so that I can start using my phone. As of now, my phone is still stuck at the boot screen with that error.

Download Stock firmware from sammobile for your phone and flash it with ODIN.

dork997 said:
Download Stock firmware from sammobile for your phone and flash it with ODIN.
Click to expand...
Click to collapse
Does it mean I would not be able to use the N5 port rom?

I see many people using this rom for N910G in India. I've shared much detailed info about my issue. Somebody please help.

Funny Sykes said:
I see many people using this rom for N910G in India. I've shared much detailed info about my issue. Somebody please help.
Click to expand...
Click to collapse
i have no idea about note 5 port as i have never used it.

dork997 said:
i have no idea about note 5 port as i have never used it.
Click to expand...
Click to collapse
Alright, now that my n910g is stuck with that I tried installing some nameless rom and the screen doesn't really work. I need to use Spen always even to click on the dial button.
Can you suggest any good rom for Note 4 N910g?
I really need to give my phone a fresh start as this will be my first time to flash my phone.
Please help!!

Listen, Dr. Ketan's note 5 port L12 with S6 edge features is based on android 5.1.1 Australian "COH4" baseband version. So first download and install that stock firmware having COH4 baseband version using odin. Here's the link for that: www.sammobile.com/firmwares/download/56424/N910GDTU1COH4_N910GXSA1COH4_XSA/
And after installing this, root your phone, then install CWM recovery and install dr. Ketan's L12 version rom which you have downloaded. Your phone will work fine after that.
Baseband version of your phone plays a very important role in determining which rom you can install on your phone. For example if u liked and downloaded a samsung stock modified custom rom that has baseband version say "PQR" and suppose if your phone has baseband version "XYZ" then you cannot install that rom on your phone. To install that rom you will first need to flash the stock rom of PQR baseband version in Odin. To check which baseband version your phone is running, go to (settings >> about phone/device >> baseband version). Look at the last 3 or 4 alphabets.

Shane_Picardo said:
Listen, Dr. Ketan's note 5 port L12 with S6 edge features is based on android 5.1.1 Australian "COH4" baseband version. So first download and install that stock firmware having COH4 baseband version using odin. Here's the link for that: www.sammobile.com/firmwares/download/56424/N910GDTU1COH4_N910GXSA1COH4_XSA/
And after installing this, root your phone, then install CWM recovery and install dr. Ketan's L12 version rom which you have downloaded. Your phone will work fine after that.
Baseband version of your phone plays a very important role in determining which rom you can install on your phone. For example if u liked and downloaded a samsung stock modified custom rom that has baseband version say "PQR" and suppose if your phone has baseband version "XYZ" then you cannot install that rom on your phone. To install that rom you will first need to flash the stock rom of PQR baseband version in Odin. To check which baseband version your phone is running, go to (settings >> about phone/device >> baseband version). Look at the last 3 or 4 alphabets.
Click to expand...
Click to collapse
Alright, downloading the stock firmware and then will try flashing it with the kd.Ketan's L12 rom. I hope it works.

Funny Sykes said:
Alright, downloading the stock firmware and then will try flashing it with the kd.Ketan's L12 rom. I hope it works.
Click to expand...
Click to collapse
downloaded the mentioned stock rom and then tried flashing the dr.ketan rom.
It always kept saying android media stopped working and when i click ok, again the same pop up and nothing works.
No icons are displayed but the edge+ feature was showing.
What is the best way to have this rom ?

Funny Sykes said:
Alright, downloading the stock firmware and then will try flashing it with the kd.Ketan's L12 rom. I hope it works.
Click to expand...
Click to collapse
Did you try my method? Did it work?

Used coh4 baseband which you said. But could not find the proper root file. Please help with the root and cwm files for 910g which work. Then i will try flashing dr.ketan rom

Yes I tried, now I am using the same baseband you have mentioned which is Australian, now the touch doesn't work well but with s pen it works fine. What to do ?>

Shane_Picardo said:
Did you try my method? Did it work?
Click to expand...
Click to collapse
"Shane_Picard"
Downloaded the stock from from sammobile and my phone was able to boot successfully. But the problem is that ever since, I tried flashing twrp recovery to flash dr.ketan rom which did not work. My phone's touch is really not working well. I have enabled touches in developer options and confirm that my s-pen works fine but when I touch the phone, it gets detected 1 cm below where I actually touch. This problem might have been created when I flashed twrp recovery because that was the first time I saw this issue.
Please help how to fix this ?

SAMSUNG Blocked wifi on kitkat 4.4.2 stock roms???

Hello 2 all !
i use the stock roms for my S4 ,most offen i use kitkat 4.4.2 versions.Today i reflash my phone and i get this stupid msg on notification : '
""Security notice' stating - 'your device's security has blocked an action that is not permitted. No further action is required'"" .. and this one is blocking the wifi to off, and i cant get it to ON the button rest grey after rom booted. .
I reflash many time with diffrent roms versions (only kk 4 4 2 from sammobile) the probl is the same on every rom i flash !!
I think is releate with KNOX crap but im not sure ,The only way to have wifi on kitkat again is to flash another kernel after i flash the stock rom !!! I really need help with that because i need some stock version for daily use.
I try kies ....same results.... i try odin..same results ...wifi dont start ! I delete wpa_supplicant from data/misc/wifi ..nothing.... no wifi ! Most of all when i open kies to reflash new firmware it say kies NO SUPPORT for youre model any more !! whtf???? i use to reflash with kies many time for fix trubles,and now...no suppot this model ??
I so many users with this problem but NO FIX for it !
Pls... if anyone can fix this or post an solution, i really apreciate for it .
My phone is S4 GT-I9515 and i use the stock rom 4.4.2 - I9515XXU1AND3_I9515YJV1ANE1_XSG
Pls .....any help ??

Here's the stock i9515 firmware: http://www.sammobile.com/firmwares/database/GT-I9515/
Maybe try a stock 5.01 firmware?

audit13 said:
Here's the stock i9515 firmware: http://www.sammobile.com/firmwares/database/GT-I9515/
Maybe try a stock 5.01 firmware?
Click to expand...
Click to collapse
You miss my point ..is stock firmware kitkat who has this problem, i flash 4.4.2.KK .....5.01 LP ,all stock roms!,the wifi is still stuck on grey button and when i try to activate it come up that notification pop with : Your phones security has blocked an action that is not permitted. No further action is required.! ...

jean_pulbere said:
Hello 2 all !
i use the stock roms for my S4 ,most offen i use kitkat 4.4.2 versions.Today i reflash my phone and i get this stupid msg on notification : '
""Security notice' stating - 'your device's security has blocked an action that is not permitted. No further action is required'"" .. and this one is blocking the wifi to off, and i cant get it to ON the button rest grey after rom booted. .
I reflash many time with diffrent roms versions (only kk 4 4 2 from sammobile) the probl is the same on every rom i flash !!
I think is releate with KNOX crap but im not sure ,The only way to have wifi on kitkat again is to flash another kernel after i flash the stock rom !!! I really need help with that because i need some stock version for daily use.
I try kies ....same results.... i try odin..same results ...wifi dont start ! I delete wpa_supplicant from data/misc/wifi ..nothing.... no wifi ! Most of all when i open kies to reflash new firmware it say kies NO SUPPORT for youre model any more !! whtf???? i use to reflash with kies many time for fix trubles,and now...no suppot this model ??
I so many users with this problem but NO FIX for it !
Pls... if anyone can fix this or post an solution, i really apreciate for it .
My phone is S4 GT-I9515 and i use the stock rom 4.4.2 - I9515XXU1AND3_I9515YJV1ANE1_XSG
Pls .....any help ??
Click to expand...
Click to collapse
jean_pulbere said:
You miss my point ..is stock firmware kitkat who has this problem, i flash 4.4.2.KK .....5.01 LP ,all stock roms!,the wifi is still stuck on grey button and when i try to activate it come up that notification pop with : Your phones security has blocked an action that is not permitted. No further action is required.! ...
Click to expand...
Click to collapse
I do not think I missed the point. Your original post only mentions KK but not LP which is why I suggested LP. The last line of your original post even states the ROM in use on the phone.

audit13 said:
I do not think I missed the point. Your original post only mentions KK but not LP which is why I suggested LP. The last line of your original post even states the ROM in use on the phone.
Click to expand...
Click to collapse
Ok ,my engl is not so good so maibe i im not make my self clear .. I use the rom posted in the last line ,for daily use till now... today i wanted to relflash the same rom and surpeise ,it comme up with that problem . I reflash many time bot not working again...so i decide to reflash diffrent version of stocks rom....Kitkat and Lolipop... and with no succes because that erorre is still present and wifi is still stuck on any rom i flash! I

No worries. Thank you for clarifying the situation. Your English is fine.
I don't know which version of Odin you are using but I always use Odin 3.07 because I have never had a problem with 3.07.
Do you have a pit file for your phone? Flashing the pit file with the stock ROM in Odin might solve the problem.

jean_pulbere said:
Ok ,my engl is not so good so maibe i im not make my self clear .. I use the rom posted in the last line ,for daily use till now... today i wanted to relflash the same rom and surpeise ,it comme up with that problem . I reflash many time bot not working again...so i decide to reflash diffrent version of stocks rom....Kitkat and Lolipop... and with no succes because that erorre is still present and wifi is still stuck on any rom i flash! I
Click to expand...
Click to collapse
This is coz KNOX blocked the wifi access.
SOLUTION:
1. Flash via ODIN the latest android 4.4.2 version to your device: THIS ONE.
2. Root it via ODIN with CF-Autoroot.
3. Using Root Explorer (for example) delete all the KNOX entries: GUIDE.
4. Reboot your device. You should have wifi now. Install TRIANGLE AWAY and reset your flash counter to complete the job. Done.

Joku1981 said:
This is coz KNOX blocked the wifi access.
SOLUTION:
1. Flash via ODIN the latest android 4.4.2 version to your device: THIS ONE.
2. Root it via ODIN with CF-Autoroot.
3. Using Root Explorer (for example) delete all the KNOX entries: GUIDE.
4. Reboot your device. You should have wifi now. Install TRIANGLE AWAY and reset your flash counter to complete the job. Done.
Click to expand...
Click to collapse
I really apreciate your help,lets try to see what happen" )) In this moment the only way to use wifi is because i flash other kernel (Googy_max3 patched for my phone model) so...let"s try and i ll commeback with news,thx very much again!

Joku1981 said:
This is coz KNOX blocked the wifi access.
SOLUTION:
1. Flash via ODIN the latest android 4.4.2 version to your device: THIS ONE.
2. Root it via ODIN with CF-Autoroot.
3. Using Root Explorer (for example) delete all the KNOX entries: GUIDE.
4. Reboot your device. You should have wifi now. Install TRIANGLE AWAY and reset your flash counter to complete the job. Done.
Click to expand...
Click to collapse
And the answer is ......... NO ((( Same problem same notification NO WIFI ,the button is still grey (( it s start to make it me crazy this crap ..grrrr... is there any way to get ONLY the kernel ,stock kernel for my firmware ??? maibe if i flash separate will fix it ...i was think about that because if if flash the googy_max3 patched it works ...so may be an kernel probl ??? ((

jean_pulbere said:
And the answer is ......... NO ((( Same problem same notification NO WIFI ,the button is still grey (( it s start to make it me crazy this crap ..grrrr... is there any way to get ONLY the kernel ,stock kernel for my firmware ??? maibe if i flash separate will fix it ...i was think about that because if if flash the googy_max3 patched it works ...so may be an kernel probl ??? ((
Click to expand...
Click to collapse
Install this APP and add screenshots pls.

You mentioned that you tried kies in your post but Kies didn't support your phone. It could be that the updated ROM is supported in Samsung's smart switch.
http://www.samsung.com/us/smart-switch/

audit13 said:
No worries. Thank you for clarifying the situation. Your English is fine.
I don't know which version of Odin you are using but I always use Odin 3.07 because I have never had a problem with 3.07.
Do you have a pit file for your phone? Flashing the pit file with the stock ROM in Odin might solve the problem.
Click to expand...
Click to collapse
i try flashing with all odin version included 3.07 but is not odin probl...is something in my phone that bloked wifi in kernel or something..knox..security polices i dont have any clue how to fix it...i flash phone from years..many models..but never happen like this...i dont hv any explication. kies not support my phone model but till now it was supported.. i try it with the other soft recomandate from kies and surprise..not support for my model !! im really f..k up...pfff... what du you say about pit file??? i dont hv that file..where to search and how to use??

Joku1981 said:
Install this APP and add screenshots pls.
Click to expand...
Click to collapse
i know the apk for phone info...what do you want to see ?? i make the screenshot at ..what??

audit13 said:
You mentioned that you tried kies in your post but Kies didn't support your phone. It could be that the updated ROM is supported in Samsung's smart switch.
http://www.samsung.com/us/smart-switch/
Click to expand...
Click to collapse
i told you ..till now i repair my stock with kies or smart swich...many time i do that.so ..today when i instaled kies and open..surpriseeee..my model not suported!! i install smart swich..open...surpriseee..your device not supported!!..whtf !??

incredibile...i extracted modem.bin and wifi modem from stock firmware..flashed ...no success again....im in a point break...no clue what to do. i bet is something related to security ..but not sure..because of notificatiin mesage...security block bla bla...... triangleaway was reseting my flash counter knox disable delete..rooted...all works but not the damn wifi...samsung i hate you!! (

jean_pulbere said:
incredibile...i extracted modem.bin and wifi modem from stock firmware..flashed ...no success again....im in a point break...no clue what to do. i bet is something related to security ..but not sure..because of notificatiin mesage...security block bla bla...... triangleaway was reseting my flash counter knox disable delete..rooted...all works but not the damn wifi...samsung i hate you!! (
Click to expand...
Click to collapse
Try a custom rom.

Lennyz1988 said:
Try a custom rom.
Click to expand...
Click to collapse
Finnaly the probl is fixed !!!!! pffffff... i flash with odin 10.7 the lolipop stock rom 5.0 ,after full instal, go to recovery stock and wipe factory reset wipe chache ,reboot download mode and flash again 4.4.2 kit kat,roted instal twrp and ..gere you go all function back to normal ! ))) pfffhiuuu ... thx for helping me guys ! Btw ...i still search for stock 4.4.2 kernel ... pls post link if you know !

N9005 doesn't work with custom roms?

Hello,
I have a N9005 that I'm tryin to install a custom ROM (I have another one already with Norma v29 working perfectly). In this one I flashed the original 5.0 firware and then tried to root, isntall custom recover, custom rom, etc., as I normally do. With this phone I can root and install custom recovery but every custom ROM i tried I always have a bootloop on Galaxy Note 3 screen (tried Norma, Phonesis, etc.).
I can reflash to an original ROM but don't understand why it doesn't work with a custom ROM.
Can any one help me? I even tried to change bootloader on a specfific tutorial for Norma v29.
Thank you in advance!

Boot to download mode and check the model first .
Is this a used phone ??

Hello. Yes is a used phone. The model is a SM-9005. The roms I'm using are for this model. I tried again a Lolipop 5.0 stock rom, then root, then recovery (until here everything works). Then applied Norma V29 and i'm stuck again at the Galaxy Note 3 screen, the blue led starts to blink and then the phone restarts. Really can't understand. Even tried the same memory card from my Note. Well the only difference is that one is 16GB and this one is 32GB. Any stock rom work perfectly but didn't want to use them.

Can it be that the internal memory size is causing the issue? is the only difference....can someone help?

Well my original phone is a 32GB. Don't know why the hell I was thinking 16GB... so most weired. If someone could help will be great. It's working with the stock 5.0 and rooted with CM-AUTO.

before flashing custom firmware you should enter the recovey and make complete format for both cache and data partitions.
after the firmware install it might take the system up to 10 minutes to boot.

Thank you for the answer. i'm doing all the steps (I changed roms on Note 3 for some time now). This one startups on the Galaxy Note 3 Screen, the led starts to blink (like 4-5 times) and restarts himself. So is not waiting time. made factory resets, all the wipes, even a script I found for fixing EFS. When I flash a Android 4.4 or 5.0 stock from SamMobile just works.

hi note 3 users
I'm new here i trying to install twrp in my n9005 odin give me pass the flashing but when my phone restart i press power + volume up + home button my phone go to stock recovery im try also with philz but same result can somebody help me
** when i download twrp give me 2 choice... American OR Europe what the correct version for my n9005 im leaving in Saudi Arabia
and i use the original cable usb 3 or i can use the normal Samsung usb cable
THANKS

adel alsayed said:
hi note 3 users
I'm new here i trying to install twrp in my n9005 odin give me pass the flashing but when my phone restart i press power + volume up + home button my phone go to stock recovery im try also with philz but same result can somebody help me
** when i download twrp give me 2 choice... American OR Europe what the correct version for my n9005 im leaving in Saudi Arabia
and i use the original cable usb 3 or i can use the normal Samsung usb cable
THANKS
Click to expand...
Click to collapse
hala adel, recheck the twrp version you downloaded is for 9005? check the md5 of your download..
9005 is the international version so its europe, US phones are different..
hope it helps, I can't think of anything else.. read in twrp for note 3 thread also

Dan0v said:
hala adel, recheck the twrp version you downloaded is for 9005? check the md5 of your download..
9005 is the international version so its europe, US phones are different..
hope it helps, I can't think of anything else.. read in twrp for note 3 thread also
Click to expand...
Click to collapse
twrp is ok but i cant install nt ux 9.7 rom by twrp give me faild ... pleas hellllllp

adel alsayed said:
twrp is ok but i cant install nt ux 9.7 rom by twrp give me faild ... pleas hellllllp
Click to expand...
Click to collapse
Suggests you are using the wrong TWRP version .
Read the roms instructions/ search thread .

use TWRP version 2.8.7.0.
Most custom roms do not support v 3.x.x.x

golalmo said:
use TWRP version 2.8.7.0.
Most custom roms do not support v 3.x.x.x
Click to expand...
Click to collapse
i use it already but given faild my phone is n90005 32 gb I don't know what can I do for install ux 9.7 rom

Does any other rom install ??

JJEgan said:
Does any other rom install ??
Click to expand...
Click to collapse
Yes i can install ... Phronesis Rom as a normal install only facing faild and zip corrupt in UX9.7 ROM

adel alsayed said:
Yes i can install ... Phronesis Rom as a normal install only facing faild and zip corrupt in UX9.7 ROM
Click to expand...
Click to collapse
then check the md5 of magma nx9.7..!
read the how to install in tge magma rom.. sometimes something small will interrupt the flashing

fabio.teles said:
Hello,
I have a N9005...
Click to expand...
Click to collapse
I thought I'd clean up the phone.
I installed via ODIN official fw = Lollipop.
Then root + TWRP 3.1.1.
Next installing custom rom RR 7.1.
ERROR
I resolved as follows:
Installing "CP_N9005XXUGBPB1_MODEM.tar" + "BL_N9005XXUGBPB2_BOOTLOADER.tar"
Now RR installation is successful!
But "not SIM" (can not enter PIN)
Solution:
Override file "libsec-ril.so". Here is: Root / System / lib / libsec-ril.so
Done - it works!
Files here: https://ulozto.cz/!M6PZA7EKQHNe/xda-zip
It helped me. Will it help you too?
*******
Thanks @"Anon_Help_You" !!!
(https://forum.xda-developers.com/galaxy-note-3/help/solution-lineage-os-sim-t3640689)