Database Users

My U8800 pro Bricked

Hi i tried to install custom rom so renamed recovery.img to icsrecovery.img and put Custom roms recovery .img and restarted the phone . But now my phone is gone . It showing
"
Image signature verify fail!
Your boot/recovery image may have an incorrect signature.
Please update your image to a signature official one.
You can remove battery for power down."
Please help me :crying:

Gajanana said:
Hi i tried to install custom rom so renamed recovery.img to icsrecovery.img and put Custom roms recovery .img and restarted the phone . But now my phone is gone . It showing
"
Image signature verify fail!
Your boot/recovery image may have an incorrect signature.
Please update your image to a signature official one.
You can remove battery for power down."
Please help me :crying:
Click to expand...
Click to collapse
This is a problem I had once too and I was like "OMG I [email protected] up my phone!!!" but it's not a big deal fixing it at all. Just go to huaweidevice.com download official ICS from there and then format your sd card. Open the rar file you downloaded and copy the dload folder that you will find in folder step 1. Put your sd card on your phone, connect it to your charger and press vol + vol- and power button at the same time. When update complete(step one takes 4-5 seconds) format your sd card again and do the same with step 2 and step 3. Step 2 takes about 5 minutes so no need to worry. Let the recovery wipe cache when you finish step 3 and then it will reboot 2-3 times. Then go to official ICS thread by pikachukaki and unlock pink screen. Through pink screen replace the recovery.img with the recovery made by ivan or geno and then reboot your phone. Flash a custom rom of your liking doing wipe cache, format factory reset, wipe dalvik, format system and install zip from sd card. PROFIT :good:

Thank you my phone worked fine . Only step2 is enough. But to unlock pinkscreen only pow+vol++vol- is enough or anything more to do. Coz my pc is not detecting any media in pinkscreen.pls post the link if u have:thumbup:
Sent from my U8800Pro using xda premium

hi
SvTeam said:
This is a problem I had once too and I was like "OMG I [email protected] up my phone!!!" but it's not a big deal fixing it at all. Just go to huaweidevice.com download official ICS from there and then format your sd card. Open the rar file you downloaded and copy the dload folder that you will find in folder step 1. Put your sd card on your phone, connect it to your charger and press vol + vol- and power button at the same time. When update complete(step one takes 4-5 seconds) format your sd card again and do the same with step 2 and step 3. Step 2 takes about 5 minutes so no need to worry. Let the recovery wipe cache when you finish step 3 and then it will reboot 2-3 times. Then go to official ICS thread by pikachukaki and unlock pink screen. Through pink screen replace the recovery.img with the recovery made by ivan or geno and then reboot your phone. Flash a custom rom of your liking doing wipe cache, format factory reset, wipe dalvik, format system and install zip from sd card. PROFIT :good:
Click to expand...
Click to collapse
I was trying to follow your steps beacose i have the same problem but i dont know how to format and how to find my sd card how that is posible to find it ? when i start my phone i find only 1 folder that name is (Image) that's all :/ and inside of this file i have only 1 file that name is (recovery.img) any way plis help me how to find or open my sd card???

signature verification failed
pls ....say how to unbrick...my u8800 pro also....it also show signature verification failed....

[fix] Huawei Honor 4x (CHE-L04) stucked at Honor logo { RECOVERY FIX FOR HONOR 4X }

Recently there was an issue with Honor 4x users who updated from KitKat (emui 3.0) --> Lollipop (emui 3.1) version due to some server issues(might be too many downloads at same time because of many many users of Honor4X in India) This is actually due to a corrupted recovery and flashing a new recovery might solve the issue.
To solve the issue HONOR 4X stucked at Honor logo ,i have an easy solution for all those users: Please download and extract the software package from below official path(around 35MB file)
https://drive.google.com/folder/d/0ByJkSOohdNz_Wnd6cVQ3Nlh1am8/edit
Requirements:
1) Make sure that the Micro SD card is available with enough free space(atleast 200MB) and can be read and write. It is recommended that The Micro SD card is made by Sandisk, Kingstone, or Kingmax.
2) Make sure that the power of the battery is enough to run the process. It is recommended that the power of the battery is more than 50%.
Procedure:
Step 1. Format the Micro SD card (This operation is OPTIONAL ).
Step 2. Copy the entire dload folder (with UPDATE.APP in it) contained in the file we downloaded to the root directory of the Micro SD card.
Step 3. Shut down the phone.
Step 4. Press the VOLUME UP + VOLUME DOWN + POWER Key(simultaneously for few seconds) to power on the phone and enter the Software Upgrade Mode begins automatically. This will start the FIX process on your device.
Step 5. When the progress bar stops(100% upgrade successful), the phone will automatically power OFF and restart.
:fingers-crossed::good: Your device should be working fine now. :good::fingers-crossed:

software upgrade mode not working
my software upgrade mode does not working, it always goes straight to the TWRP recovery mode

Ruisu23 said:
my software upgrade mode does not working, it always goes straight to the TWRP recovery mode
Click to expand...
Click to collapse
Upgrade needs stock recovery to be installed and I don't think tha TWRP is stock

booted to twrp instead of the stock emergency recovery? try using huawei update extractor and get all the .img files and fastboot flash all the .img files. the method is pretty much the same as fixing my own Che2-L11. once you flashed all the .img files, yes. it will not boot. but, you can access the emergency recovery menu (the menu that allows you to scan and would allow reparing via wifi). IF you can get to this menu, then youre ok good to go for forced upgrade via microsd. just make sure you are using the latest version available your your region. IF it didnt work, you have to fallback by fastboot flash the kitkat version of update.app and force upgrade with that kitkat update.app file. then when its fully booted to language screen, proceed normally as you would a hard reset all phone, then use the usual lolipop, next mellow official update.app file. then, your typical twrp, magisk, and more.

honor_ninja95 said:
Recently there was an issue with Honor 4x users who updated from KitKat (emui 3.0) --> Lollipop (emui 3.1) version due to some server issues(might be too many downloads at same time because of many many users of Honor4X in India) This is actually due to a corrupted recovery and flashing a new recovery might solve the issue.
To solve the issue HONOR 4X stucked at Honor logo ,i have an easy solution for all those users: Please download and extract the software package from below official path(around 35MB file)
https://drive.google.com/folder/d/0ByJkSOohdNz_Wnd6cVQ3Nlh1am8/edit
Requirements:
1) Make sure that the Micro SD card is available with enough free space(atleast 200MB) and can be read and write. It is recommended that The Micro SD card is made by Sandisk, Kingstone, or Kingmax.
2) Make sure that the power of the battery is enough to run the process. It is recommended that the power of the battery is more than 50%.
Procedure:
Step 1. Format the Micro SD card (This operation is OPTIONAL ).
Step 2. Copy the entire dload folder (with UPDATE.APP in it) contained in the file we downloaded to the root directory of the Micro SD card.
Step 3. Shut down the phone.
Step 4. Press the VOLUME UP + VOLUME DOWN + POWER Key(simultaneously for few seconds) to power on the phone and enter the Software Upgrade Mode begins automatically. This will start the FIX process on your device.
Step 5. When the progress bar stops(100% upgrade successful), the phone will automatically power OFF and restart.
:fingers-crossed::good: Your device should be working fine now. :good::fingers-crossed:
Click to expand...
Click to collapse
plz resend link

Soft brick CAN-L11 / Really need help

Hi everybody, i soft bricked my lovely Nova, here is the situatiuon :
- I tried to update the phone with the Emui 5 OTA zip but the phone turned off and now won't boot anymore
- When i try to boot normaly, it show the Huawei eRecovery and fail to recover the phone
- I can boot on fastboot mode / rescue mode
- I have TWRP installed and can boot on it but when i try to flash the can-L11c432.zip supplied by MORPH, it says "Failed to mount '/cust'" and stops here.
I really don't know what to do, moreover i lost the backup i made with TWRP.
If someone can help me i'll offer him a meal (paypal)
Sorry for my bad english and have a nice day everyone.

Hi Keezle,
here is the recovery.img from the EMUI5 Beta Update. Flash it with fastboot and apply the update once again (Boot with Power + Vol down + Vol up) After the Update is complete make a full wipe in the stock recovery.
You need a external SD Card with the dload folder thats include the Update.

Keezle said:
Hi everybody, i soft bricked my lovely Nova, here is the situatiuon :
- I tried to update the phone with the Emui 5 OTA zip but the phone turned off and now won't boot anymore
- When i try to boot normaly, it show the Huawei eRecovery and fail to recover the phone
- I can boot on fastboot mode / rescue mode
- I have TWRP installed and can boot on it but when i try to flash the can-L11c432.zip supplied by MORPH, it says "Failed to mount '/cust'" and stops here.
I really don't know what to do, moreover i lost the backup i made with TWRP.
If someone can help me i'll offer him a meal (paypal)
Sorry for my bad english and have a nice day everyone.
Click to expand...
Click to collapse
I came to a similar situation. The CUST supplied by Morph seems not to be flashable. Untick the CUST when flashing the NANDROID. It will go through the process and the phone will eventually boot again.

-=MoRpH=- said:
Hi Keezle,
here is the recovery.img from the EMUI5 Beta Update[/URL]. Flash it with fastboot and apply the update once again (Boot with Power + Vol down + Vol up) After the Update is complete make a full wipe in the stock recovery.
You need a external SD Card with the dload folder thats include the Update.
Click to expand...
Click to collapse
Si, i put the C432B320 update.zip in dload folder on an external SD Card, i flashed the Emui 5 beta update recovery successfully, but when i boot with Power + Vol down + Vol up it starts the installation and stops at 5% saying "Software install failed !". Should i use another update.zip file ?
Thank you MORPH

Keezle said:
Si, i put the C432B320 update.zip in dload folder on an external SD Card, i flashed the Emui 5 beta update recovery successfully, but when i boot with Power + Vol down + Vol up it starts the installation and stops at 5% saying "Software install failed !". Should i use another update.zip file ?
Thank you MORPH
Click to expand...
Click to collapse
Maybe unpack the C432B320 until you have an update.app in dload folder. I did that and flashed the ROM. The first try was a failure and I had to restore a NANDROID (bootloop). Currently, I'm trying to flash it again but now with the EMUI5 recovery morph has supplied.

System of a pWne!^ said:
Maybe unpack the C432B320 until you have an update.app in dload folder. I did that and flashed the ROM. The first try was a failure and I had to restore a NANDROID (bootloop). Currently, I'm trying to flash it again but now with the EMUI5 recovery morph has supplied.
Click to expand...
Click to collapse
I'll try this now thank you

Keezle said:
I'll try this now thank you
Click to expand...
Click to collapse
But be careful and have a backup. I just flashed it and it seems not to work again :/ It just keeps on sitting on the Huawei logo for minutes now. That's it.

System of a pWne!^ said:
But be careful and have a backup. I just flashed it and it seems not to work again :/ It just keeps on sitting on the Huawei logo for minutes now. That's it.
Click to expand...
Click to collapse
So now, it start installing update and says "installation failed !" at 50%

Keezle said:
So now, it start installing update and says "installation failed !" at 50%
Click to expand...
Click to collapse
What OTA do you currently try to flash? I currently try to give my luck to CAN-L11C432B320 even though I have a L01 device. http://update.hicloud.com:8180/TDS/data/files/p3/s15/G79/g0/v71311/f1/full/update.zip

If needed, i updated the link for the cust img...
http://forum.xda-developers.com/showthread.php?p=70294269

Same isseu with other update files, i think i have to wait for the full EMUI 5 firmware..

Keezle said:
Same isseu with other update files, i think i have to wait for the full EMUI 5 firmware..
Click to expand...
Click to collapse
hello I have the problem Software install failed! can you help me thanks in advance

better work with ADB and flash 3 main imgs....recovery,boot,system images...then reboot...then do the 3 buttons update

need help
Hello dear friends
Do not be tired
I need a dump file Huawei Can l11
The ears are burned and their hard drive is changed
If there is someone else's phone root, please give me a dummy file
thanks to everyone

Hardest Bricked my P10 Plus. Can't even turn my phone off.

However, if you are watching this, it means ur phone is bricked with huawei p10 lite/p10/p10 plus
Read the replies and follow the instruction noted by @Blackball and his links.
Then you will find you self a way to restore the phone.
Thanks again to @Blackball and rest of you guys, much appreciated for your help.

What on earth is Yoroot?

So, You can't enter fastboot mode am i right ?
Do you connect usb cable to your devices before press Vol- and Power button ?

Current Situation
After the battery was dead, i actually can enter the fastboot and i used TWRP 3.1.1 for huawei P10 Plus from github. double wiped my device and by far i have entered the system normally.
However, the ROM wasn't official and i lost my warranty for unlock my huawei phone. And the custom service from Huawei said that they don't provide any official ROM Since it's Android 7.0 .
This ROM is really crappy that i can't delete/uninstall any Application i installed.(It gets reboot everytime i try to and the Application is still there even i just tried to Delete/Uninstall).
Worst of all, some options does not work properly in "Option" menu . (For example i can't access to "Developer mode" that everytime i press it it tabbed back to the former menu.)
I really hate this crappy menu so i tried to search on the internet for P10 Plus ROM so far i get B133 update ROM i can find and i tried to install it from SDcard by pressing VOL - and VOL + and Power buttom.
It says failed to update system at 5% while updating/recoverying the system.
and the ROM which i'm using was found in HUAWEI's official fan forum from Club.Huawei.com a forum belongs in china.(Rooted rom B140).
Right now seems the only option for me is to find a better ROM than this .(At least won't get me so many bugs like this one .:crying: )
and Thanks for your comment "Bigbearxl" it worked as normally it should after the battery was dead then i recharged it.
Yet Right now the PC doesn't recognize the device though Via-Usb because it's not Huawei official ROM and Hisuite helper only recognize their own ROM and the rest Phone helper or ADB can't recognize the device while The Phone is Booting normal .
And Reply to "Craphead" Yoroot is a special Root tool for Huawei P10/P10 plus made by chinese from Huawei Fan Club forum.

New Update
After rewrited boot.img though fastboot mode from https://forum.xda-developers.com/p10/help/root-huawei-p10-p10-t3589946 thanks to "yury_z, " i can start to delete files with current system, but it's still crappy that it doesn't even have camera
So i think i will try dload method to recovery my phone with firware that i found in forum.

Failed
Looks like i have to stock with that bit longer
dload with update.app method failed. and recovery TWRP install missing md5.
Unless i get System.img or i guess i can't get another system.:crying:

This work for P10plus too
https://forum.xda-developers.com/mate-9/how-to/guide-mate-9-flash-update-package-t3593108

WackyJoker said:
Looks like i have to stock with that bit longer
dload with update.app method failed. and recovery TWRP install missing md5.
Unless i get System.img or i guess i can't get another system.:crying:
Click to expand...
Click to collapse
Maybe you could also try installing stock firmware with funkyhuawei, it's not for free though. But dload method never works on P10/plus unfortunately.

thanks @Blackball and @Craphead. i checked both of your method but didn't work and this new twrp 3.1.0 i downloaded displayed sd card 0mb. and i followed poster's step and missing one file.
However i might found a useful Thead that might work and i'm gonna try tonight.
http://www.stechguide.com/huawei-p10-plus-b133-nougat-update/

That is what I wrote.
It seems that firmware finder work for P10/plus now.
https://play.google.com/store/apps/details?id=com.teammt.gmanrainy.huaweifirmwarefinder

@Blackball not sure you what you mean by that, do you mean that you can actually use it to install firmware on p10/p10 plus now? If so how did they manage to get around the authentication issue?

I debranded my phone from L09 to L29 DualSim with this guide. It work with moded stock recoverys.

Blackball said:
That is what I wrote.
It seems that firmware finder work for P10/plus now.
https://play.google.com/store/apps/details?id=com.teammt.gmanrainy.huaweifirmwarefinder
Click to expand...
Click to collapse
well i tried your method but there were some file that can't be downloaded from that post so i used another and,eventhough with complete files, the method i posted and i was going to use it tonight. Failed.
did all the steps from update.bat indicated and all worked fine till the last step that it says " automaticly install system" and the phone shows error at recovery.(similar to dload method because it automaticly create dload and exact those ROM files)
it indicates a big red " ! " sign and stopped. basicly i'm back to "No System Status"
The only method wowrks for my "P10 Plus" is " flash system system.img " method.
yet i don't know how to exact system.img boot.img recovery.img etc from those stock firmware like those chinese.
i have some of their rewrote roms (it's crappy because i has no default camera and it's for chinese P10 Plus A.K.A VKY_L29) .
Yet i can't find any System.img on google by far.

Blackball said:
I debranded my phone from L09 to L29 DualSim with this guide. It work with moded stock recoverys.
Click to expand...
Click to collapse
I haven't tried your Firmware Finder method , i think i can install crappy system.img then try your Firmware Finder method.
Because right now i wiped my system and i'm without system :crying:

Guys This Thead https://forum.xda-developers.com/showthread.php?t=2315547
tells you how extract flashable rom files from firmware update.app.
It should work but i only made to Unknownfile XX .img and i can't download his script "HuaweiFinder" from his google drive.

Holy Crap it worked, i Extracted system.img and other img from update.app by some Chinese scripted unpack script. and I'm trying to restore my device though fastboot mode with adb.

Blackball said:
That is what I wrote.
It seems that firmware finder work for P10/plus now.
https://play.google.com/store/apps/details?id=com.teammt.gmanrainy.huaweifirmwarefinder
Click to expand...
Click to collapse
well just tried your method and at last step it says installing failed. then i reboot entered rec mode choose wipe/factory reset
wiped till 50% and stopped, it can't factory reset.
Before this method fastboot mode was " Phone unlock " " Bootloader unlock."
Now it's just "Phone unlock"

now i'm stuck at boot loop "your device is booting now" then it rebooted and back to "your device is booting now" again then automaticly goes to Erecovery mode. I have to shutdown device for now and hope i can find some solution tomorrow :S

When you try this :
https://forum.xda-developers.com/showthread.php?t=3593108
It's important that you have the 3 zip files from your wanted firmware and rename them correctly. Don't mix with another firmwares.

Blackball said:
When you try this :
https://forum.xda-developers.com/showthread.php?t=3593108
It's important that you have the 3 zip files from your wanted firmware and rename them correctly. Don't mix with another firmwares.
Click to expand...
Click to collapse
i did this method yesterday and, well, i can't get update_full_VKY-L09_hw_eu.zip from the link : http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1475/g104/v85029/f1/full/filelist.xml . only Update.zip and Update_full_data.zip . the other one "update_full_VKY-L09_hw_eu.zip" i had to get it from another webside (it's also b133)
it shows a big "!" sign at the last step . i did everything it tells and tried both sdcard&script way to flash twice both rebrand&same brand update.
after the failure i can't enter "Vol +" and "Vol -" and "Power button" to do dload method . When i try to do that it just goes in Recovery mode.
In recovery mode i tried to wipe data/factory reset. It stopps at 50% which is after wipe and starting to factory reset at 50% it failed.
i try to flash in system.img and boot.img yet i still can not enter the system and stuck at bootloop.

Zenfone 3 Laser Updatıng Androıd 7 Problem

I have an android 6.0.1 on my zen 3 laser.i want to back to android 7.1 but my phone is unlocked and i cant get the update on Fota and i download the lastest firmware on asus website and try to do update on recovery but i try to flash it it gives me this error ; cant install this n package when m image is builded earlier 20170201 how can i fixed this ?

Dark_Nephew said:
I have an android 6.0.1 on my zen 3 laser.i want to back to android 7.1 but my phone is unlocked and i cant get the update on Fota and i download the lastest firmware on asus website and try to do update on recovery but i try to flash it it gives me this error ; cant install this n package when m image is builded earlier 20170201 how can i fixed this ?
Click to expand...
Click to collapse
What Marshmallow firmware are you running on? I possible, send the screenshot here. I can help you to update

firmware
Saktis_Impreza said:
What Marshmallow firmware are you running on? I possible, send the screenshot here. I can help you to update
Click to expand...
Click to collapse
Thanks my phone running on WW-13.40.104.1 firmware

Dark_Nephew said:
Thanks my phone running on WW-13.40.104.1 firmware
Click to expand...
Click to collapse
1) Download the files I've attached below and put the .zip file on the root of your SD card.
*Download and install one by one
a)http://dlcdnet.asus.com/pub/ASUS/ZenFone/ZC551KL/UL-Z01B_1-WW-14.40.144.29-user.zip
b)http://dlcdnet.asus.com/pub/ASUS/ZenFone/ZC551KL/UL-Z01B_1-WW-14.40.144.37-user.zip
c)http://dlcdnet.asus.com/pub/ASUS/ZenFone/ZC551KL/UL-Z01B_1-WW-20.40.8.58-user.zip
d)http://dlcdnet.asus.com/pub/ASUS/ZenFone/ZC551KL/UL-Z01B_1-WW-30.42.31.1-user.zip
e)http://dlcdnet.asus.com/pub/ASUS/ZenFone/ZC551KL/UL-Z01B_1-WW-31.40.13.50-user.zip
f)http://dlcdnet.asus.com/pub/ASUS/ZenFone/ZC551KL/UL-Z01B_1-WW-32.40.106.23-user.zip
g)http://dlcdnet.asus.com/pub/ASUS/ZenFone/ZC551KL/UL-Z01B_1-WW-32.40.106.41-user.zip
h)http://dlcdnet.asus.com/pub/ASUS/ZenFone/ZC551KL/UL-Z01B_1-WW-32.40.106.43-user.zip
2) After that, power off your phone and enter recovery mode by pressing Power Button + Volume Down Button.
3) Navigate to 'apply update via microSD card' by using volume keys and select it by using Power Button.
4) Select the update .zip file and wait 5-10 minutes
5) After updating, navigate to 'reboot'
Hope this helps

Saktis_Impreza said:
1) Download the files I've attached below and put the .zip file on the root of your SD card.
*Download and install one by one
a)http://dlcdnet.asus.com/pub/ASUS/ZenFone/ZC551KL/UL-Z01B_1-WW-14.40.144.29-user.zip
b)http://dlcdnet.asus.com/pub/ASUS/ZenFone/ZC551KL/UL-Z01B_1-WW-14.40.144.37-user.zip
c)http://dlcdnet.asus.com/pub/ASUS/ZenFone/ZC551KL/UL-Z01B_1-WW-20.40.8.58-user.zip
d)http://dlcdnet.asus.com/pub/ASUS/ZenFone/ZC551KL/UL-Z01B_1-WW-30.42.31.1-user.zip
e)http://dlcdnet.asus.com/pub/ASUS/ZenFone/ZC551KL/UL-Z01B_1-WW-31.40.13.50-user.zip
f)http://dlcdnet.asus.com/pub/ASUS/ZenFone/ZC551KL/UL-Z01B_1-WW-32.40.106.23-user.zip
g)http://dlcdnet.asus.com/pub/ASUS/ZenFone/ZC551KL/UL-Z01B_1-WW-32.40.106.41-user.zip
h)http://dlcdnet.asus.com/pub/ASUS/ZenFone/ZC551KL/UL-Z01B_1-WW-32.40.106.43-user.zip
2) After that, power off your phone and enter recovery mode by pressing Power Button + Volume Down Button.
3) Navigate to 'apply update via microSD card' by using volume keys and select it by using Power Button.
4) Select the update .zip file and wait 5-10 minutes
5) After updating, navigate to 'reboot'
Hope this helps
Click to expand...
Click to collapse
Thanks but non of works i tried all of them tomorrow i send my phone to the Asus to replace the new motherboard hope they cant find i unlocked the phone