Database Users

U8800 Pro Upgrade

Hello everybody,
I bought today a U8800 Pro.It has Froyo installed and i'm trying to install official GB before upgrading to ICS.I' m following the official procedure with the pink screen and the file i'm using is the HUAWEI_U8800P_Android_2.3_V100R001C00B521.The procedure starts normally with unpacking but later i get the error message that Upgrade failed.
What am i doing wrong?

There was step1, step2 and step3? I think no... you must find the official gb version with all steps and flash it how is written in instructions.
Eclair and gb has different file systems and step1 is changing them. Step1 from ics is enlarging system partition, the file system of gb and ics is the same. If you buy this phone already, have a good luck with it
P.S. this is Q/A section?
Sent from my ragelis

Thanks bronxitas.
I'll start searching.

Placed Update.app in the dload folder in SD Card
Vol + + Vol - + Power.
Restart the phone.
Plz note that you have 512Mb available in SD card.

It's very hard to find the files.
I downloaded some files from here: http://forum.xda-developers.com/showthread.php?t=1366420&page=2
I completed step1 but now i cannot enter upgrade mode.
When holding Vol+ + Vol- and Power On i only get the pink screen.No upgrade mode.
Heeeeeelp!!!!!

giorgoslouk said:
It's very hard to find the files.
I downloaded some files from here: http://forum.xda-developers.com/showthread.php?t=1366420&page=2
I completed step1 but now i cannot enter upgrade mode.
When holding Vol+ + Vol- and Power On i only get the pink screen.No upgrade mode.
Heeeeeelp!!!!!
Click to expand...
Click to collapse
Try ones with official update with out battery using data cable or charger
Sent from my U8800Pro using xda app-developers app

giorgoslouk said:
It's very hard to find the files.
I downloaded some files from here: http://forum.xda-developers.com/showthread.php?t=1366420&page=2
I completed step1 but now i cannot enter upgrade mode.
When holding Vol+ + Vol- and Power On i only get the pink screen.No upgrade mode.
Heeeeeelp!!!!!
Click to expand...
Click to collapse
I wrote that you mus do exactly what is written in flashing instructions and what have you done? 2.2 -> 2.3 must be flashed with step1 and step2 renamed file. Both at the same time in the dload directory. Why you don't read the instructions??? An we must read you're crying?
If you finished with step1, you now must have different file system and theoreticaly you must flash only step2 and maybe step3. But i don't know if you will pass it ok. Becouse everybody can read and they done upgrade from 2.2 to 2.3 with 2 files in dload at the same time.
Have a good time by creating you're own methods of doing something, that can brick you're phone!
Sent from my ragelis

Hi,
I tried to upgrade u8800pro from Froyo 2.2.2 to Gingerbread, but I didn't successeded.
Here are the steps I've made:
1. I downloaded HUAWEI Ideos firmware(U8800Pro,Android 2.3,V100R001C00B521,Oversea Normal) from download-c. huawei. com/download/downloadCenter?downloadId=13574&version=14620&siteCode=worldwide
2. I erased all data from SD card.
3. I copied downloaded dload folder containing UPDATE.APP to SDcard.
4. In Settings->Privacy->Factory data reset I erased all data from phone. During this process, phone was restarted and set to initial factory state.
5. I turned off the phone.
6. I held Vol + + Vol - + Power.
7. On phone was displayed "Firmware update step 1/2 Unpacking"
8. "Update failed" appeared on next window.
Can someone advice me, what did I wrong? These steps are include more as is needed according Upgrade Guideline, but anyway it doesn't work.
Than You.

plz help yoga 2 830l boot failed. efi hard drive

hi
how are you
I have a big problem
When you update a device error occurred ( fastboot failde)
Then the machine continues to this situation
Video demonstrates the problem
youtube.com/watch?v=E8k0KOQF8p0&feature=youtu.be
I do not know how to solve the problem
is there a solution?​

you tried to flash a kitkat rom over an existing lollipop and the files flashed cannot be loaded by the lollipop bios (that one remained the same) you need to flash a lollipop stock rom instead
1. download and extract this file someplace on your pc
2. uninstall your existing Phone Flash Tool and from the drivers folder install both files (Intel Phone Flash Tool and Android Driver accepting defaults) reboot pc when finished
3. place your tab in DNX mode (from power off press and hold both volume keys then press pwr to start, in a few you screen will show "Fastboot starting..." message and hang on that. you must get that message on your tab screen, restart from power off until you have it)
4. start the installed Phone Flash Tool and load flash.xml from the extracted YT2-830L... folder then Start Flashing, it will reboot when done

ionioni said:
you tried to flash a kitkat rom over an existing lollipop and the files flashed cannot be loaded by the lollipop bios (that one remained the same) you need to flash a lollipop stock rom instead
1. download and extract someplace on your pc
2. uninstall your existing Phone Flash Tool and from the drivers folder install both files (Intel Phone Flash Tool and Android Driver accepting defaults) reboot pc when finished
3. place your tab in DNX mode (from power off press and hold both volume keys then press pwr to start, in a few you screen will show "Fastboot starting..." message and hang on that. you must get that message on your tab screen, restart from power off until you have it)
4. start the installed Phone Flash Tool and load flash.xml from the extracted YT2-830L... folder then Start Flashing, it will reboot when done
Click to expand...
Click to collapse
Really I do not know how to thank
But how Mark device receives calls​

sayyid haroun said:
Really I do not know how to thank
But how Mark device receives calls​
Click to expand...
Click to collapse
download extract and flash this using the same procedure (from DNX load and flash using flash.xml)

ionioni said:
download extract and using the same procedure (from DNX load and flash using flash.xml)
Click to expand...
Click to collapse
very good Everything is just fine.
Thank you very much
I want custom rom Lollipop for
The device phone lenovo s856​

please
I have a question you can download Windows 8 on the tablet

I have same problem on Lenovo yoga 1050L... any help?

ionioni said:
you tried to flash a kitkat rom over an existing lollipop and the files flashed cannot be loaded by the lollipop bios (that one remained the same) you need to flash a lollipop stock rom instead
1. download and extract "this file" someplace on your pc
2. uninstall your existing Phone Flash Tool and from the drivers folder install both files (Intel Phone Flash Tool and Android Driver accepting defaults) reboot pc when finished
3. place your tab in DNX mode (from power off press and hold both volume keys then press pwr to start, in a few you screen will show "Fastboot starting..." message and hang on that. you must get that message on your tab screen, restart from power off until you have it)
4. start the installed Phone Flash Tool and load flash.xml from the extracted YT2-830L... folder then Start Flashing, it will reboot when done
Click to expand...
Click to collapse
Hi ionioni,
I have the same problem with Yoga tablet 830LC, would you please re-upload the file, i cannot get it because it is removed.
Thanks!

hi dear ionioni
the link you provided "flash this" is dead. can you please upload it again?
Thanks

How to easy root your NOTE EDGE 915G MARSHMALLOW 6.0/6.0.1

I leave the download link contains TWRP and rooting SuperSU for 915G 6.0 / 6.0.1
It cost me quite get compatible files . But after all this we can rootearlo smoothly.
INSTALL TWRP
1- Open Odin
2- Select "AP" and open the archive"twrp_3.0-915F-915FY-915G-915V"
3- TURN OFF YOUR NOTE EDGE.
4- POWER ON PRESS "VOL DOWN + POWER + HOME", in the first menu press "VOL. UP" and connect via USB
5- SELECT "START" in the ODIN.
EXECUTE SUPERSU
then tell the program "pass" in the last step , we just need move the file "BETA-SuperSU-v2.71-20160331103524" to the internal phone memory.
Now... POWER OFF the note edge... and POWER ON PRESS "VOL UP+ POWER + HOME".
In the new menu touch in "INSTALL" and select the SUPER SU ARCHIVE.
just need scroll the inferior bar.
WE ARE ROOT.
FILES: mega.nz/#!flEy1AbB!xEHo5lLZ6RpIW9DJiqA7YXZNOZN3Dwx4cXPAaI9oS9w
NOTE: I just try in this version SM N915G MARSHMALLOW 6.0.1

Download Link
You haven't provided download link

ChandravadanR said:
You haven't provided download link
Click to expand...
Click to collapse
I only seek help new people on this issue.
It is a small guide, is not spam , is not advertising or anything malicious.
It would have liked to say thank people who was useful this material and not be checking whether one can or can not put a link , as I said before , it's nothing bad.

https://mega.nz/#!flEy1AbB!xEHo5lLZ6RpIW9DJiqA7YXZNOZN3Dwx4cXPAaI9 oS9w
Enter decryption key
To access this folder/file, you will need its Decryption key.
If you do not have the key, contact the creator of the link.

when i try dont tellme that, is a direct link up by me.

Can you unroot to get OTA updates, then root again?

odin shows PASS but when i reboot agaib to install SUPERSU , it again starts android recovery... what should i do know??:

oren_b said:
Can you unroot to get OTA updates, then root again?
Click to expand...
Click to collapse
Yes you can.

faridfox said:
Yes you can.
Click to expand...
Click to collapse
Will I loose TWRP if I do upgrade via OTA?

RobbieJeiter said:
I leave the download link contains TWRP and rooting SuperSU for 915G 6.0 / 6.0.1
It cost me quite get compatible files . But after all this we can rootearlo smoothly.
INSTALL TWRP
1- Open Odin
2- Select "AP" and open the archive"twrp_3.0-915F-915FY-915G-915V"
3- TURN OFF YOUR NOTE EDGE.
4- POWER ON PRESS "VOL DOWN + POWER + HOME", in the first menu press "VOL. UP" and connect via USB
5- SELECT "START" in the ODIN.
EXECUTE SUPERSU
then tell the program "pass" in the last step , we just need move the file "BETA-SuperSU-v2.71-20160331103524" to the internal phone memory.
Now... POWER OFF the note edge... and POWER ON PRESS "VOL UP+ POWER + HOME".
In the new menu touch in "INSTALL" and select the SUPER SU ARCHIVE.
just need scroll the inferior bar.
WE ARE ROOT.
FILES: mega.nz/#!flEy1AbB!xEHo5lLZ6RpIW9DJiqA7YXZNOZN3Dwx4cXPAaI9oS9w
NOTE: I just try in this version SM N915G MARSHMALLOW 6.0.1
Click to expand...
Click to collapse
Hi,
1- what is the dic code for the link ?
2-There is a newer version of twrp , TWRP-3.1.0-for_915F_915FY_915G.zip , is that ok to use this one? why you used the "twrp_3.0-915F-915FY-915G-915V" ?
thanks

no reply ??
so much for a dead thread

I need the original boot.img for the very first firmware on asus zenfone 3 520kl.

I have twrp flashed on my phone, and so cant get the oreo update. The phone had been stuck in the bootloop recently, and the guy at the service centre flashed the first available version of the firmware, but how he did it without removing the custom recovery, i dunno. So now i need the boot.img for this firmware: (WW_Phone-13.16.5.33). Thanks in advance.

Ashbor said:
I have twrp flashed on my phone, and so cant get the oreo update. The phone had been stuck in the bootloop recently, and the guy at the service centre flashed the first available version of the firmware, but how he did it without removing the custom recovery, i dunno. So now i need the boot.img for this firmware: (WW_Phone-13.16.5.33). Thanks in advance.
Click to expand...
Click to collapse
1) Follow the steps provided https://www.asus.com/zentalk/thread-196287-1-1.html
2) After updating, download last Nougat firmware here:
ZE520KL:
http://dlcdnet.asus.com/pub/ASUS/Ze...96.337208848.1517300772-1193861605.1517300772
ZE552KL:
http://dlcdnet.asus.com/pub/ASUS/Ze...96.337208848.1517300772-1193861605.1517300772
3) Download this firmware and put it on the root of SD card
4) After downloading, power off your phone and enter recovery mode by pressing Power button + Volume Down
5) And then navigate to 'apply update via microSD' by using volume button
6) Select by using power button and apply the update you've downloaded
7) Wait 5-10 minutes
8) After updating, select "reboot now"
Your device has been updated to last Nougat build
To update your device to Android Oreo ;
Download Oreo firmware here:
ZE520KL:
http://dlcdnet.asus.com/pub/ASUS/ZenFone/ZE520KL/UL-ASUS_Z017D_1-WW-15.0410.1712.31-user.zip
ZE552KL:
http://dlcdnet.asus.com/pub/ASUS/ZenFone/ZE552KL/UL-ASUS_Z012D-WW-15.0410.1712.31-user.zip
Follow steps (3-8) And your device will be updated to Android Oreo
Join our Telegram Group here:
MOD EDIT: LINK REMOVED
The distribution of social media links is no longer allowed on XDA. Please refer to the thread linked below:
Telegram and Whatsapp Channels - Going Forward

It says the stock firmware is for nougat, i myself am currently running marshmallow. I had tried to flash nougat through the custom recovery, ( when the thing was stuck in a bootloop) and it said something like only versions upto *some serial no.* can be updated.
Anyway, thanks for the links, will try it.:good:

Hello, I own the ZE552KL (Z012), but when I saw your question I was able to find a link containing what you need for your model. Take a look, I did not download but I believe it contains the necessary files.
1) download firmware files :
https://tinyurl.com/y863uw7y
-save UL-ASUS_Z017D_1-WW-13.16.5.33-user.zip to SD card / insert card in phone.
- under the folder ''boot recovr z017dww13.16.5.33''
2) Go to fastboot mode (power + vol up)
- flash recovery.img (command: fastboot flash recovery recovery.img)
- flash boot.img (command: fastboot flash boot boot.img)
3) reboot to recovery (power + vol down)
4) install update form micro sd card. set the file UL-ASUS_Z017D_1-WW-13.16.5.33-user.zip that you saved earlier
5) wipe cache
6) factory reset
Originally posted at this linkhttps://tinyurl.com/y6v7m2pq
All credits: haithem gs
I hope you can solve your problem.

How to Install Update Using Local Upgrade or Recovery

Hey Folks, i know it is basic stuff but it can helps new users here.
Method 1: Install Update Using Local Upgrade in Phone Settings
First Download Proper ROM package for OnePlus 5 and 5T.
Connect your device to the PC or MAC using the USB cable.
Now, Transfer the Downloaded ROM file to the root of the device's Internal Storage. ( Don't put in any folder )
Disconnect the smartphone from the MAC or PC.
Now Go to the phone's Settings >> System Updates. Then tap on the gear icon on the top-right corner of the display.
Now Select the Local Upgrade*Option.
The Phone system will bring the OTA Update ROM file from the Internal Storage.
Select the file name, then tap on the Upgrade Now button to start installation process.
Method 2: Install OTA Update Using TWRP Recovery
First Download Proper ROM package for OnePlus 5 and 5T.
Connect your device to the PC or MAC using the USB cable.
Now, Transfer the Downloaded ROM file to the root of the device's Internal Storage. ( Don't put in any folder )
Disconnect the smartphone from the MAC or PC.
Now Go to the phone's Settings >> System Updates. Then tap on the gear icon on the top-right corner of the display.
Now Select the Local Upgrade*Option.
The Phone system will bring the OTA Update ROM file from the Internal Storage.
Select the file name, then tap on the Upgrade Now button to start installation process.
Once the process of Installation is complete.
Turn off the Device and boot into recovery mode. to do so Press and hold Volume up + Power Button until your device boot into Recovery mode.
Go to Wipe data and cache. ( You can use Volume buttons to navigate and power button to select.)
The Press Erase everything( Pics, Music, etc) and then select ok to process.

Is method 1 working for updating from rooted official 5.1.7 to OB20? I am on stock recovery and would uninstall magisk first.

McFlypants said:
Is method 1 working for updating from rooted official 5.1.7 to OB20? I am on stock recovery and would uninstall magisk first.
Click to expand...
Click to collapse
Now you need to follow method 2 for rooted device. if you follow 1st method you may see some app crash and other problems.