Related
Tomorrow I will have had my Evo for two weeks. Today the USB connector on the bottom is funky/loose, only goes to recharge if I push/hold it a little sideways. Even then no adb or drive connect. Arrgghhhhhh!!! Who wants to bet Sprint won't fix since it's rooted? How does rooting it make the connector work loose?
Sorry, just wanted to pitch a *****.
oldboynet said:
Tomorrow I will have had my Evo for two weeks. Today the USB connector on the bottom is funky/loose, only goes to recharge if I push/hold it a little sideways. Even then no adb or drive connect. Arrgghhhhhh!!! Who wants to bet Sprint won't fix since it's rooted? How does rooting it make the connector work loose?
Sorry, just wanted to pitch a *****.
Click to expand...
Click to collapse
Pull the file out of the stock exe and put it on your sd card then reflash it to root, you don't need the usb port to go back to root and get them to replace it. The exe is only a little program that pushs it onto the phone.
No I don't know which file you need i just know that it's possible, anyone care to elaborate?
http://forum.xda-developers.com/showthread.php?p=6783326
My brother had the same issue on his moment. He had to tightly wrap the cord around the phone to get it to charge. He had insurance on it, and they swapped it out for a new one for free.
did you charge using one from sprint or the one that came with the evo? The one i bought from sprint is a lot harder to put in on my phone =/
scev5 said:
did you charge using one from sprint or the one that came with the evo? The one i bought from sprint is a lot harder to put in on my phone =/
Click to expand...
Click to collapse
Yeah, it came with the phone from Sprint!
You're saying the aftermarket cable has a slightly bigger connector? I'll have to try it.
It does look like the "shell" of the female connector in the phone has spread a little, maybe a "vaginal tuck" will help.
Can someone who has both an HTC and aftermarket cable tell me how they differ dimensionally, especially WRT the positioner tab in the middle of the shell, it seems a little too thin to do its intended job on the HTC cable I have.
Dave2582 said:
My brother had the same issue on his moment. He had to tightly wrap the cord around the phone to get it to charge. He had insurance on it, and they swapped it out for a new one for free.
Click to expand...
Click to collapse
Was it rooted? I doubt they even know what is that. I mean, the people at the customer's desk.
baiatul said:
Was it rooted? I doubt they even know what is that. I mean, the people at the customer's desk.
Click to expand...
Click to collapse
Of course it was rooted! I'd also replaced the boot animation and removed the start up sound. Oh yeah, the recovery too. The boot sequence I can fix from the terminal, but I don't see how to get back both the stock ROM and stock recovery without having adb.
Anyway, I did do a little prying on the connector shell and no joy, at least not yet. It bends way too easily, like thick tinfoil, probably tears just as quick.
mrono said:
Pull the file out of the stock exe and put it on your sd card then reflash it to root, you don't need the usb port to go back to root and get them to replace it. The exe is only a little program that pushs it onto the phone.
No I don't know which file you need i just know that it's possible, anyone care to elaborate?
http://forum.xda-developers.com/showthread.php?p=6783326
Click to expand...
Click to collapse
When you use the stock RUU to unroot it removes everything and sets it back to stock. Recovery, boot anim, everything
mrono said:
When you use the stock RUU to unroot it removes everything and sets it back to stock. Recovery, boot anim, everything
Click to expand...
Click to collapse
Did I mention I have no system available that runs those wacky .EXE files (and no inclination to install one)? Besides, doesn't this require a USB connect?
Current status: it appears no amount of connector shell reforming is going to re-establish USB connectivity. I can charge, but that's it. I'll report back when I've tried another cable. In the meantime, be gentle with your USB connector!
oldboynet said:
Did I mention I have no system available that runs those wacky .EXE files (and no inclination to install one)? Besides, doesn't this require a USB connect?
Current status: it appears no amount of connector shell reforming is going to re-establish USB connectivity. I can charge, but that's it. I'll report back when I've tried another cable. In the meantime, be gentle with your USB connector!
Click to expand...
Click to collapse
mrono said:
Pull the file out of the stock exe and put it on your sd card then reflash it to root, you don't need the usb port to go back to root and get them to replace it. The exe is only a little program that pushs it onto the phone.
No I don't know which file you need i just know that it's possible, anyone care to elaborate?
http://forum.xda-developers.com/showthread.php?p=6783326
Click to expand...
Click to collapse
don't need to run the exe
oldboynet said:
Did I mention I have no system available that runs those wacky .EXE files (and no inclination to install one)? Besides, doesn't this require a USB connect?
Current status: it appears no amount of connector shell reforming is going to re-establish USB connectivity. I can charge, but that's it. I'll report back when I've tried another cable. In the meantime, be gentle with your USB connector!
Click to expand...
Click to collapse
If you can charge then something else is wrong. You are getting the connectors touching to create the charge.
If you are having problems getting to download mode, Use the Stock Captivate Cable Only when trying to access Download mode!
Story:
I have struggled with 2 captivates now to get into download mode. I have read tons of arguments back and forth from people that say it is easy to get into download mode, and people who say that it is impossible with their phones.
Well, for some history...On my first captivate, I bricked it and it refused to go into download mode...PERIOD. I proceeded to exchange it(I was within my 30 days), and didn't think much more about it. Well, I installed Cognition 2.2 recently and in the process realized that my new phone would go into download mode just fine by doing the standard process of:
1)remove battery, sim, microsim
2)reinserting battery only
3)holding down both volume buttons
4)inserting usb cable
No problems right? Well, I ended up "bricking" my phone by accidentally deleting my framework-res.apk file(don't ask) and lo and behold, I suddenly could not get it to go back into download mode. I was really pissed at this point and spent all night trying everything all over again.
Well, I decided to give up for the night and go to bed. As I was laying in bed a thought crossed my mind. I had purchased a second usb cable(from ATT) to use with the captivate, and the one time that download mode had worked, I was using the standard captivate cable that came in the box. However, every time it wasn't working I was using my second USB cable. So I got up out of bed to try the stock cable and, lo and behold, it works flawlessly every time.
I would venture to guess that this is what the problem is with most everyone else that can not get their captivates to go into download mode. So, if you haven't tried it give it a shot. And certainly tell everyone you know to use the stock cable only.
I just want to reiterate that the spare cable that would NOT work was purchased from ATT and is the cable that they recommend you purchase as a spare. It wasn't like I got it from ebay or something.
Using a usb cable I got from ebay, monoprice, htc, motorola, and stock samsung cable, I was able to get into download mode everytime...
... also, shouldn't this be in general and not in development?
No USB Hubs or Extenders
RECOMMENDED: Use your stock USB cable that came with the phone.
IMPORTANT: Plug the USB cable into your computers native motherboard USB port (the back of your computer). Plugging the cable into USB switches, extenders or external ports, does not allow the phone to enter download mode correctly.
Aerimus said:
I just want to reiterate that the spare cable that would NOT work was purchased from ATT and is the cable that they recommend you purchase as a spare. It wasn't like I got it from ebay or something.
Click to expand...
Click to collapse
I can confirm, although i found this out a whilllllle ago, just didnt think much of it lol
Just so you know. I found that in some cases certain USB cables just will not work with some devices. This has to do with the quality of the cable. I would avoid overly thin or flat cables because they tend to be cheaply made and won't be able to provide a stable power flow. The shorter the cable the better.
shinji257 said:
The shorter the cable the better.
Click to expand...
Click to collapse
The cable he/I bought from AT&T is shorter the the cable that comes in the box, and doesnt work, so im not sure if shorter is better
kkeo said:
Using a usb cable I got from ebay, monoprice, htc, motorola, and stock samsung cable, I was able to get into download mode everytime...
... also, shouldn't this be in general and not in development?
Click to expand...
Click to collapse
I can recreate this over and over again. The reason I put this here and not in general is because I, like many others, have struggled over and over with odin, and people had the attitude of "it works every time, you're just doing something wrong." The reality is that you're trying to prove that I'm just "doing something wrong" because all your cables work. I can recreate this over and over again. What do you want me to do, make a video of it in order for you to believe that there is an actual issue?
I think it's important for people to see this when trying all the roms and mods that are in the development section. In fact, I think it would be REALLY helpful if designgears would add this to the "how to get to download mode" section on the Odin thread. I can't tell you the amount of hours I have spent trying to get into download mode. It is incredibly frustrating to do everything right, and have others telling you that you are not doing it right.
I searched google endlessly looking for a solution to get into download mode, and no where did I see this as a possible solution. Also, as an FYI, when I plug in the other cable, it just goes straight to the battery screen no matter what I press. I can hold down the power and volume buttons to go into recovery mode, but it's impossible to get to download mode.
I have plugged mine into a usb port in the front of my computer as well as in my monitor. I have never had a problem with download mode or anything else.
Aerimus said:
I can recreate this over and over again. The reason I put this here and not in general is because I, like many others, have struggled over and over with odin, and people had the attitude of "it works every time, you're just doing something wrong." The reality is that you're trying to prove that I'm just "doing something wrong" because all your cables work. I can recreate this over and over again. What do you want me to do, make a video of it in order for you to believe that there is an actual issue?
I think it's important for people to see this when trying all the roms and mods that are in the development section. In fact, I think it would be REALLY helpful if designgears would add this to the "how to get to download mode" section on the Odin thread. I can't tell you the amount of hours I have spent trying to get into download mode. It is incredibly frustrating to do everything right, and have others telling you that you are not doing it right.
I searched google endlessly looking for a solution to get into download mode, and no where did I see this as a possible solution. Also, as an FYI, when I plug in the other cable, it just goes straight to the battery screen no matter what I press. I can hold down the power and volume buttons to go into recovery mode, but it's impossible to get to download mode.
Click to expand...
Click to collapse
While this is good to know...It is quite possible you got a faulty second cable, and some of the cables that do come in the box are faulty as well..
It's always a good reminder to try changing out cables if your having an issues. Same for downloading different things that work for a-lot of people and not for you/me..same too for hooking into the back of the computer and bypassing the external hub....Sometimes you get lucky and find the problem right away..sometimes you don't....It's called a process of elimination...
FWIW..I've never trusted cheap ass cables..in anything. Never have..Never will..but..JSYK..expensive cables go bad from time to time too
Thanks for the reminder
Mac
jromney said:
RECOMMENDED: Use your stock USB cable that came with the phone.
IMPORTANT: Plug the USB cable into your computers native motherboard USB port (the back of your computer). Plugging the cable into USB switches, extenders or external ports, does not allow the phone to enter download mode correctly.
Click to expand...
Click to collapse
I use the external ports on the front of my case without a problem...
jromney said:
RECOMMENDED: Use your stock USB cable that came with the phone.
IMPORTANT: Plug the USB cable into your computers native motherboard USB port (the back of your computer). Plugging the cable into USB switches, extenders or external ports, does not allow the phone to enter download mode correctly.
Click to expand...
Click to collapse
I've also noticed that, on my PC at least, my front case USB ports don't always reliably work with this procedure. I've been plugging the USB cable since into the USB ports on the motherboard.
Mac11700 said:
While this is good to know...It is quite possible you got a faulty second cable, and some of the cables that do come in the box are faulty as well..
It's always a good reminder to try changing out cables if your having an issues. Same for downloading different things that work for a-lot of people and not for you/me..same too for hooking into the back of the computer and bypassing the external hub....Sometimes you get lucky and find the problem right away..sometimes you don't....It's called a process of elimination...
FWIW..I've never trusted cheap ass cables..in anything. Never have..Never will..but..JSYK..expensive cables go bad from time to time too
Thanks for the reminder
Mac
Click to expand...
Click to collapse
The thing that throws me off is that this cable works for EVERYTHING else. Data transfer, media syncing, recovery mode, charging, etc... There was never anything that would indicate any issue with the cable. I just want to make sure everyone knows this, because when I was struggling to get into download mode, I didn't see anyone suggest that it could be the cable, even though the cable worked for everything else.
OP - thanks for posting this! It is at least another thing to keep in mind when troubleshooting. I was actually considering getting another cable to keep at work.....
P.S. would we get in trouble for quoting Michael Scott's favorite joke in response to post #6? Yea, I know. Little too obvious right. I'll restrain. Already made myself chuckle anyways
terrigan said:
I've also noticed that, on my PC at least, my front case USB ports don't always reliably work with this procedure. I've been plugging the USB cable since into the USB ports on the motherboard.
Click to expand...
Click to collapse
Um.. not true - Although I did use the stock USB Cable - I was flashing the night away (trying to recover my bricked phone) on my Win7 box using a USB hub that had a few other devices hooked into it.
Never had an issue getting to D/L mode.. and it found the phone again and again and again and again.... (go on for infinity).
I think it has more to do with the hardware your connecting it to and how the USB drivers loaded (i.e. XP=****e) and what type of OS your running more than anything. I had terrible luck with my work's XP rig... but my Win7 x64 rig found the device while in d/l mode - found the drivers?!?! and I was good to go.
Although - it is always a good rule of thumb IF you can't get the device to recognize on your computer to use the original cable and hook to the best source of power for your USB which is the back of your computer.
So.. this isn't a [FIX] - just a good tip. If you can't get into D/L mode by holding the volume button and jamming in the USB or using ADB -> Reboot Download command.. your pretty much fux0red.
I need original USB cable
I just wanted to throw in my $0.02 I needed to use the original USB cable and a port directly on my motherboard. The usb cable I bought from newegg does not work with my MSI X58 motherboard and my capitavate. The original cable does not work if I use a front usb port on my Antec P183 case. Strangly an identical usb cable from newegg that I ordered at the same time does work with my work computer, Dell X38 motherboard.
Ive had the same problem... only way i get it to download mode is via Terminal:
su
reboot download
I really cant get it to work no other way :s
jromney said:
RECOMMENDED: Use your stock USB cable that came with the phone.
IMPORTANT: Plug the USB cable into your computers native motherboard USB port (the back of your computer). Plugging the cable into USB switches, extenders or external ports, does not allow the phone to enter download mode correctly.
Click to expand...
Click to collapse
honestly, i have my phone cord that came into the box, connected to an extender cable, that's connected into a usb port hub so i don't agree with what you're saying here
mine works every single time
This method has been known for some time now, reading really helps...
http://forum.xda-developers.com/showthread.php?t=731989
designgears said:
This method has been known for some time now, reading really helps...
http://forum.xda-developers.com/showthread.php?t=731989
Click to expand...
Click to collapse
I appreciate all your hard work on everything. I read through that post and tried to search it several times... Believe me, I spent hours pouring through the pages looking for something that would work.
No where did I see anyone say to make sure you were using the stock cable because other cables might not work? Feel free to correct me if I'm wrong...there are a lot of pages after all.
Furthermore...I'm sorry to be new to Android and to flashing roms, but we are all new at some point. No one is born an expert.
edit: I'm guessing you misunderstood the post? I wasn't posting about the method...just about the fact that many usb cables, including the micro usb cable that ATT sells, do not work for getting to download mode. If I'm wrong about what you were posting, feel free to correct me. If i'm correct, your post is quite ironic
The first captivate I had WOULD NOT GO INTO DOWNLOAD mode regardless of cable or usb port. I tried every port and every cable including the stock one that came with the phone.
The replacement captivate ALWAYS goes into download mode regardless of cable or port.
It's a tip and thank you for the. But if your phone is one of those that does not have 3 button recovery then it will likely not work with the 2 button download trick either.
Last week when I plugged my USB cable into my phone, it acted normal. The screen where it asks me if I want to connect USB came up, and I said yes. Everything was normal. It was baller.
Today, that doesn't happen. The screen doesn't come up and all the USB cable does is charge my phone, much like the wall plug does.
I've tried to install USB drivers, but they always require me to find "Android" in Device Manager, and it's never in there. The USB cable is doing nothing but charging my phone.
I managed to add a few mp3s over wifi, just to make sure that was actually working.
The phone is not rooted, (I was actually just going to try to do that) and everything is stock aside from a few apps.
I would really like some insight on this, please.
Do I need to get the phone replaced? Am I doing something wrong?
OK, I new to this, but thought I'd comment. If USB debugging is turned on, my seems to do that.
Settings -> Applications -> Developement -> USB Debugging
Beowins said:
I would really like some insight on this, please.
Do I need to get the phone replaced? Am I doing something wrong?
Click to expand...
Click to collapse
Did you change your kernel recently?
Sent from my Nexus S using XDA Premium App
sagech said:
Did you change your kernel recently?
Sent from my Nexus S using XDA Premium App
Click to expand...
Click to collapse
I've done nothing to the phone. Only installed a few random apps.
sorry to hi-jack your thread!
mine does exactly the same, but all i've done is manually update to 2.3.4 and my usb hasn't worked since, like you i've tried installing the drivers and that's done nothing and its also in usb debugging.
i don't know what to do or how to get it to work again, all my searching on here and via Google don't bring up much
Beowins said:
Last week when I plugged my USB cable into my phone, it acted normal. The screen where it asks me if I want to connect USB came up, and I said yes. Everything was normal. It was baller.
Today, that doesn't happen. The screen doesn't come up and all the USB cable does is charge my phone, much like the wall plug does.
I've tried to install USB drivers, but they always require me to find "Android" in Device Manager, and it's never in there. The USB cable is doing nothing but charging my phone.
I managed to add a few mp3s over wifi, just to make sure that was actually working.
The phone is not rooted, (I was actually just going to try to do that) and everything is stock aside from a few apps.
Click to expand...
Click to collapse
Put your phone into bootloader mode and try whether it detect or not?
And also, see if there is two line of words written
USB init start
USB init end ;-)
Sent from my Google Nexus S using XDA Premium App
Try another usb cord, and especially if you're using the samsung cord.
I had the same issue but when I switched to my Htc cord and my blacbkberry cord, everything worked as it should.
Sent from my Nexus S 4G using Tapatalk
plmiller0905 said:
Try another usb cord, and especially if you're using the samsung cord.
I had the same issue but when I switched to my Htc cord and my blacbkberry cord, everything worked as it should.
Click to expand...
Click to collapse
ive just tried my works blackberry usb cable and it works fine now! very odd! thanks for your help
onslack said:
sorry to hi-jack your thread!
mine does exactly the same, but all i've done is manually update to 2.3.4 and my usb hasn't worked since, like you i've tried installing the drivers and that's done nothing and its also in usb debugging.
i don't know what to do or how to get it to work again, all my searching on here and via Google don't bring up much
Click to expand...
Click to collapse
Wow, this is my post, verbatim. Any ideas or fixes?
plmiller0905 said:
Try another usb cord, and especially if you're using the samsung cord.
I had the same issue but when I switched to my Htc cord and my blacbkberry cord, everything worked as it should.
Sent from my Nexus S 4G using Tapatalk
Click to expand...
Click to collapse
Wow, you're right. My HTC cord worked. Thanks a lot.
I have had this happen on to me and have determined that a) the long cable that came with the NS4G is unreliable when used for USB connectivity with my PC. Shorter cables (even the shorter Samsung cable that came with my Epic) work consistently. I am guessing that this is a USB Bus power issue and some people will have better mileage than others using the stock cable, depending on their PC.
b) on a few occasions, it seems I've somehow borked the PC's USB controller and the PC wouldn't recongnize anything until I rebooted it.
window7 said:
Put your phone into bootloader mode and try whether it detect or not?
And also, see if there is two line of words written
USB init start
USB init end ;-)
Click to expand...
Click to collapse
I am getting the
USB control init
USB control init end
when in bootloader and when doing the i press vol up and vol down (triangle with android in it" with downloading below).
I would like to flash my phone to factory using Samsung Simple downloader for NS4G.
Background, installed Ice Cream but didn't have radio.img so used an SU to downgrade back to 2.3, did that but no mobile network. Then the phone updated to 2.3.6 and now getting that error. Any help will be appreciated.
I searched a few times on this forum and on google.com no luck. tried to adding a recovery file manually and zip it as update.zip and install from bootloader no luck. (use file explorer and dropbox to get files on to phone).
Thanks
Amar Bar
i had this issue a few months ago, turns out the usb port on the phone got defective so i could only charge it but not use the mass storage function, had to get it replaced under warranty! hope this isnt the issue with you guys
innisdb said:
i had this issue a few months ago, turns out the usb port on the phone got defective so i could only charge it but not use the mass storage function, had to get it replaced under warranty! hope this isnt the issue with you guys
Click to expand...
Click to collapse
Was your phone rooted at any point before the issue? Not sure if they would fix it under warranty for me. I will call Samsung and see.
Thanks, I tried that but no luck. Still need to tried other cords. Also.
My phone developed this problem a couple days ago. I haven't done much to troubleshoot it...figured the port must be damaged.
(Not using the Samsung cable, btw)
AardvarkAdventure said:
My phone developed this problem a couple days ago. I haven't done much to troubleshoot it...figured the port must be damaged.
(Not using the Samsung cable, btw)
Click to expand...
Click to collapse
It might be the port. I will have to get a samsung cable and try it, but i doubt it will help. Plus i can tell Samsung I tried everything. (I looked a ticket, but they said get a samsung cord, they don't trust the Palm Pre cord i am using).
I had to downgrade to the HTC Hero until i get the phone fixed.
hello every one
i had an issue while trying to install new rom after i formatted my phone and all system gone
i was shocked i can use my UTG cable to run new room or even i attached to my pc . its charging but not reading from pc
so i am stocked on the leeco logo without any os
is there any way to transfer a new rom wirelessly by twrp?
What twrp do you have installed.
Did you format your SD card never do that.
Try different USB cord.
Sent from my LEX720 using xda premium
Mybe same problem with me...
Transfer data not working...charging ok but very2 slow..
https://forum.xda-developers.com/le-pro3/how-to/help-to-stock-rom-port-usb-broken-t3725929
sa1wan said:
hello every one
i had an issue while trying to install new rom after i formatted my phone and all system gone
i was shocked i can use my UTG cable to run new room or even i attached to my pc . its charging but not reading from pc
so i am stocked on the leeco logo without any os
is there any way to transfer a new rom wirelessly by twrp?
Click to expand...
Click to collapse
Do have fastboot working.
Sent from my LEX727 using xda premium
sa1wan said:
hello every one
i had an issue while trying to install new rom after i formatted my phone and all system gone
i was shocked i can use my UTG cable to run new room or even i attached to my pc . its charging but not reading from pc
so i am stocked on the leeco logo without any os
is there any way to transfer a new rom wirelessly by twrp?
Click to expand...
Click to collapse
Unfortunately, you may have fried a component on the usb board.
This can happen if you have the usb c inserted in the phone and then plug the A side into the power block.
You can order a new card here: https://www.ebay.com/itm/162671342875?ul_noapp=true If you live near a large city you should be a to find a cell repair shop that can install it for you, should cost more then $50 to $60 dollars or you can send your phone to these guys for repair for probably close to the same price http://leecoservicecenter.com/
Perhaps you can get the usb to computer working by trying this: ( worked for me)
Make sure that your computer is up to date with its usb drivers.
shut down the computer and remove all peripherals, keep unplugged except for keyboard and mouse.
restart
Boot your phone into recovery, and plug your usb cable into one of the computers primary usb ports: usually in the back.
Wait to see if your computer recognises the device.
If it doesn't and you use Windows go to Device Manager
In the Start menu, right-click Computer | Manage, then expand Computer Management on the console tree and select System Tools | Device Manager
In the Start menu, right-click Computer Properties, then click Device Manager on the left pane
Control Panel | Device Manager
Control Panel | Hardware and Sound | Device Manager
Look for the usb card. see if your device is listed there, and update the drivers. Heres a step by step : https://www.drivereasy.com/knowledge/how-to-fix-unknown-devices/
Try multiple cords, and another computer if needed.
It's also possible that the board is temporarily disabled.
Since your phone still charges, the reverse polarity protection that is programmed into the chips have shut down certain components. Perhaps the phone is not actually damaged. But in a protection mode.
Try letting your battery go completely dead, use it until it shuts down, keep restarting it until it has no power left.
With all power removed from the battery, the reverse polarity protection should reset and your next charge and hopefully the phone will be back to normal.
I hope this helps.
Well, this is worrying news. I wonder how common this issue is, or what it's caused by--a bad non-Benson approved cable? A bad USB-C port? Cements the fact that it's safer to use a USB-C to USB-C cable (provided your computer has a USB-C port) rather than a USB-C to USB-A one... now I miss Micro USB's simplicity.
sk8223 said:
Well, this is worrying news. I wonder how common this issue is, or what it's caused by--a bad non-Benson approved cable? A bad USB-C port? Cements the fact that it's safer to use a USB-C to USB-C cable (provided your computer has a USB-C port) rather than a USB-C to USB-A one... now I miss Micro USB's simplicity.
Click to expand...
Click to collapse
its happen to me with orginal cable
tsongming said:
Unfortunately, you may have fried a component on the usb board.
This can happen if you have the usb c inserted in the phone and then plug the A side into the power block.
You can order a new card here: https://www.ebay.com/itm/162671342875?ul_noapp=true If you live near a large city you should be a to find a cell repair shop that can install it for you, should cost more then $50 to $60 dollars or you can send your phone to these guys for repair for probably close to the same price http://leecoservicecenter.com/
Perhaps you can get the usb to computer working by trying this: ( worked for me)
Make sure that your computer is up to date with its usb drivers.
shut down the computer and remove all peripherals, keep unplugged except for keyboard and mouse.
restart
Boot your phone into recovery, and plug your usb cable into one of the computers primary usb ports: usually in the back.
Wait to see if your computer recognises the device.
If it doesn't and you use Windows go to Device Manager
In the Start menu, right-click Computer | Manage, then expand Computer Management on the console tree and select System Tools | Device Manager
In the Start menu, right-click Computer Properties, then click Device Manager on the left pane
Control Panel | Device Manager
Control Panel | Hardware and Sound | Device Manager
Look for the usb card. see if your device is listed there, and update the drivers. Heres a step by step : https://www.drivereasy.com/knowledge/how-to-fix-unknown-devices/
Try multiple cords, and another computer if needed.
It's also possible that the board is temporarily disabled.
Since your phone still charges, the reverse polarity protection that is programmed into the chips have shut down certain components. Perhaps the phone is not actually damaged. But in a protection mode.
Try letting your battery go completely dead, use it until it shuts down, keep restarting it until it has no power left.
With all power removed from the battery, the reverse polarity protection should reset and your next charge and hopefully the phone will be back to normal.
I hope this helps.
Click to expand...
Click to collapse
thank you very much
i tried but it won't work
my phone is x727 the replacement part is for x720
is that working?
mchlbenner said:
Do have fastboot working.
Sent from my LEX727 using xda premium
Click to expand...
Click to collapse
nope whole USB data not working
but its charging only
sa1wan said:
thank you very much
i tried but it won't work
my phone is x727 the replacement part is for x720
is that working?
Click to expand...
Click to collapse
Have you try boot into Fastboot mode? Hold Power button + Volume down and connect phone to pc with type-c cable.
I have Le Max2 x829, Le Pro3 x720,x722 never have any issue, I bought phone from Bangood, x720 locally.
Moon75 said:
Have you try boot into Fastboot mode? Hold Power button + Volume down and connect phone to pc with type-c cable.
I have Le Max2 x829, Le Pro3 x720,x722 never have any issue, I bought phone from Bangood, x720 locally.
Click to expand...
Click to collapse
ts and my get production defects , not all....who know...all phone has shipment not 100% perfect
sa1wan said:
thank you very much
i tried but it won't work
my phone is x727 the replacement part is for x720
is that working?
Click to expand...
Click to collapse
Yes, the the X720 and the X727 are identical, the difference is the firmware.
So a board advertised as X720 will work.
---------- Post added at 08:15 AM ---------- Previous post was at 08:00 AM ----------
sa1wan said:
nope whole USB data not working
but its charging only
Click to expand...
Click to collapse
There is still hope: You haven't had the chance to retry once the battery is fully discharged, it may work.
I used to work for Apple Support and I have personally used that as a solution, many times to resolve open support cases. With iPhones that had the exact same issue.
After it's all sorted out. Be sure to buy high quality replacement cables that come with a warranty. I replaced all of the usb c cables my house with new ones that are IF certified. i read about others having this exact issue months ago and I procrastinated.
Hopefully, it works out.
What build twrp do you have?
You can reformat your twrp this fix your USB problem.
Fastboot on this phone volume down power down same time.
If you get fastboot working try this twrp.
https://mega.nz/#!YMojxQgI!Pa1kh_p2dRwTMdPPG-xEpCGeVdtqMvritlp8cH9zpp8
http://forum.xda-developers.com/showthread.php?p=72206979
Sent from my LEX727 using xda premium
mchlbenner said:
What build twrp do you have?
You can reformat your twrp this fix your USB problem.
Fastboot on this phone volume down power down same time.
If you get fastboot working try this twrp.
https://mega.nz/#!YMojxQgI!Pa1kh_p2dRwTMdPPG-xEpCGeVdtqMvritlp8cH9zpp8
http://forum.xda-developers.com/showthread.php?p=72206979
Sent from my LEX727 using xda premium
Click to expand...
Click to collapse
stiil not working
ajegile said:
stiil not working
Click to expand...
Click to collapse
If have experience building computers, or have ever replaced a broken lcd to screen you may consider replacing the board yourself.
Hers a video that shows how its done: https://www.youtube.com/watch?v=Y0oC4nPMXzM
Here is the teardown for our phone: http://www.myfixguide.com/manual/leeco-le-pro-3-teardown/
tsongming said:
If have experience building computers, or have ever replaced a broken lcd to screen you may consider replacing the board yourself.
Hers a video that shows how its done: https://www.youtube.com/watch?v=Y0oC4nPMXzM
Here is the teardown for our phone: http://www.myfixguide.com/manual/leeco-le-pro-3-teardown/
Click to expand...
Click to collapse
That video is for lg g6 not lecco pro 3.
Lg is easy I have many of them who know what is inside this phone.
Sent from my LEX720 using xda premium
My this
https://m.youtube.com/watch?v=QFH0z8DPd0o
mchlbenner said:
That video is for lg g6 not lecco pro 3.
Lg is easy I have many of them who know what is inside this phone.
Click to expand...
Click to collapse
Are you serious!
The point was to demonstrate how easy it is, with a high quality video. Next, anyone who's ever taken these phones apart knows the steps are similar, and opening the phone with a heat gun while not damaging anything, obviously crucial.
If you read the entire post you would had noticed the link for the LeEco? See we know what's inside now.... Pretty much the same layout.
Not only is the interior is very similar. The G6 and the x727/x720 have similar specs.
I am actually doing this repair myself on one of my Le pro 3s as soon as the board arrives.
But, I don't have the time or the motivation to make a video when plenty exist.
---------- Post added at 07:34 AM ---------- Previous post was at 07:28 AM ----------
ajegile said:
My this
https://m.youtube.com/watch?v=QFH0z8DPd0o
Click to expand...
Click to collapse
Nice find! Although also not the same phone, it's still virtually the same steps.
Go for it dude. It's not that hard as long as you are careful. Make sure you get the right sealant for resealing it back together.
You can also use double sided tape :https://www.amazon.com/Eco-Fused-Adhesive-Sticker-Phone-Repair/dp/B00BXYWXV6
tsongming said:
Are you serious!
The point was to demonstrate how easy it is, with a high quality video. Next, anyone who's ever taken these phones apart knows the steps are similar, and opening the phone with a heat gun while not damaging anything, obviously crucial.
If you read the entire post you would had noticed the link for the LeEco? See we know what's inside now.... Pretty much the same layout.
Not only is the interior is very similar. The G6 and the x727/x720 have similar specs.
I am actually doing this repair myself on one of my Le pro 3s as soon as the board arrives.
But, I don't have the time or the motivation to make a video when plenty exist.
---------- Post added at 07:34 AM ---------- Previous post was at 07:28 AM ----------
Nice find! Although also not the same phone, it's still virtually the same steps.
Go for it dude. It's not that hard as long as you are careful. Make sure you get the right sealant for resealing it back together.
You can also use double sided tape :https://www.amazon.com/Eco-Fused-Adhesive-Sticker-Phone-Repair/dp/B00BXYWXV6
Click to expand...
Click to collapse
Are you serious don't give people bad ideas phone are different inside I have done hundreds of repairs OK.
Some like lg are easy but are a pain to do.
If they that experience I say go for it .
That like giving a person a truing tools and say go for 9 out of 10 will mess up their wheels.
Sent from my LEX727 using xda premium
mchlbenner said:
Are you serious don't give people bad ideas phone are different inside I have done hundreds of repairs OK.
Some like lg are easy but are a pain to do.
If they that experience I say go for it .
That like giving a person a truing tools and say go for 9 out of 10 will mess up their wheels.
Click to expand...
Click to collapse
You obviously ignored all of the previous posts in which provided all of those caveats. I.E. using a local service provider, or the 3rd party LeEco service site that I provided the link for, among all of the other warnings that I provided in my multiple posts!
Understand, I am actually trying to help someone, and not simply waiting by to make a comment on post that I disagree with. No, I have better things to do.
By the way what valuable service did you provide ? You have repaired so many phones, why not offer your services to fix it for the OP. While you cannot solicit the OP in a post you could PM him.
We both have decades of experience, so what!
I do not provide 3rd party service, on phones.
But, I am willing to do is provide reasonable advice. Buts make it clear, anyone who has experience with component level repair and troubleshooting will understand that this is far from being difficult.
Disassemble the phone, disconnect the wires, insert new USB card, reassemble everything Honestly, my 13 year old daughter could do this. But, she did grow up in a technical environment.
As far as I can ascertain, an important aspect of XDA is sharing information and helping others. Is this why you sign in?
At the end of the day, I don't know you or your history. If you have a long posting history of being helpful and providing expert guidance then please accept my apologies, if I offended you.
I enjoy helping others, it's what I do for a living.
By the way, my answers was also intended as advice for Aegile
Hi all,
Have just started to connect my device so i can pull the patched boot image for my thread and it won't see the computer, tried on several laptops and nothing, no adb, no fastboot.
It charges just fine but does not show the android usb system notification.
Really annoyed by this as i'm kind of stuck.
I'm on 7.7 but on a custom ROM / Evo X 5.9.1, doesn't look like anyone else has this issue besides me, have seen the odd user complaining about the same thing but haven't seen any fixes come up], if anyone has any ideas then i'd be grateful to get your two cents.
Will test MSM but it's not looking good, fearing a return to oneplus as i do have a good unit with none of the issues anyones ever listed like green screen and overheating problems.
It's usually me helping others but this time i need you guys help
Check USB cable / clean the Charging port? sometimes it helps.
dewa5227 said:
Check USB cable / clean the Charging port? sometimes it helps.
Click to expand...
Click to collapse
Aye I've cleaned it up mate.
Tried different cables, I think EDL mode is working.
Means I could maybe return to OOS but it wouldn't let me back up..
Shame, I'm just downloading MSM now... Really annoyed..will give the usb socket another clean
dladz said:
Tried different cables, I think EDL mode is working.
Click to expand...
Click to collapse
well, it's a good sign , hopefully, it will be resolved out.
dewa5227 said:
well, it's a good sign , hopefully, it will be resolved out.
Click to expand...
Click to collapse
Yea I'm dreading it being hardware. Never had this issue on OOS.
I think it may be Evo X but I don't know.
Bad luck I guess
Cheers anyway.
So MSM did indeed work, it's booting now, obviously couldn't back up any of the info on the device so i'm super annoyed at that but so long as usb connectivity works then i'll be happy with that.
USB Connectivity does NOT work now so i CAN connect to EDL mode but not normal usb conenctivity.
Anyone have any ideas???
Cannot root, install anything via ADB or even delete apps via ADB. Shocking problem to have man
I'm RMA'ing my phone, just getting it set up now.
Very painful process, they absolutely need the purchase order for warranty, things have changed with 1+
3-10 days apparently, used to be 5 when i've sent it in the past.
On connecting a USB hub i can read USB sticks and i can control my phone with an xbox pad??
Am i missing something? How is all this working yet i can't mount my phone?
Best bet, probably you broke the charging port. did you by any chance use like force usb charging like that?
dewa5227 said:
Best bet, probably you broke the charging port. did you by any chance use like force usb charging like that?
Click to expand...
Click to collapse
I did use the force USB charging yes.. wishing I hadn't now..
I also connected to a usb-c to hub to connect a screen.
Issues kind of started after that.
Physically I haven't damaged it from movement. But could be from the forced charging
UPDATE:
Erm ok this is confusing???
I just connected my phone to a charger that is clearly not rated for it, in the hope it would shock the device, i then connected my phone and made a cup of tea, when i got back my phone showed me this (screenshot attached)
??? Lol what the hell? I've already booked my RMA lmfao
anyway, i shall keep an eye on it, i'll thoroughly test it and get it back up and running.
Strange, very strange.