hello every one
i had an issue while trying to install new rom after i formatted my phone and all system gone
i was shocked i can use my UTG cable to run new room or even i attached to my pc . its charging but not reading from pc
so i am stocked on the leeco logo without any os
is there any way to transfer a new rom wirelessly by twrp?
What twrp do you have installed.
Did you format your SD card never do that.
Try different USB cord.
Sent from my LEX720 using xda premium
Mybe same problem with me...
Transfer data not working...charging ok but very2 slow..
https://forum.xda-developers.com/le-pro3/how-to/help-to-stock-rom-port-usb-broken-t3725929
sa1wan said:
hello every one
i had an issue while trying to install new rom after i formatted my phone and all system gone
i was shocked i can use my UTG cable to run new room or even i attached to my pc . its charging but not reading from pc
so i am stocked on the leeco logo without any os
is there any way to transfer a new rom wirelessly by twrp?
Click to expand...
Click to collapse
Do have fastboot working.
Sent from my LEX727 using xda premium
sa1wan said:
hello every one
i had an issue while trying to install new rom after i formatted my phone and all system gone
i was shocked i can use my UTG cable to run new room or even i attached to my pc . its charging but not reading from pc
so i am stocked on the leeco logo without any os
is there any way to transfer a new rom wirelessly by twrp?
Click to expand...
Click to collapse
Unfortunately, you may have fried a component on the usb board.
This can happen if you have the usb c inserted in the phone and then plug the A side into the power block.
You can order a new card here: https://www.ebay.com/itm/162671342875?ul_noapp=true If you live near a large city you should be a to find a cell repair shop that can install it for you, should cost more then $50 to $60 dollars or you can send your phone to these guys for repair for probably close to the same price http://leecoservicecenter.com/
Perhaps you can get the usb to computer working by trying this: ( worked for me)
Make sure that your computer is up to date with its usb drivers.
shut down the computer and remove all peripherals, keep unplugged except for keyboard and mouse.
restart
Boot your phone into recovery, and plug your usb cable into one of the computers primary usb ports: usually in the back.
Wait to see if your computer recognises the device.
If it doesn't and you use Windows go to Device Manager
In the Start menu, right-click Computer | Manage, then expand Computer Management on the console tree and select System Tools | Device Manager
In the Start menu, right-click Computer Properties, then click Device Manager on the left pane
Control Panel | Device Manager
Control Panel | Hardware and Sound | Device Manager
Look for the usb card. see if your device is listed there, and update the drivers. Heres a step by step : https://www.drivereasy.com/knowledge/how-to-fix-unknown-devices/
Try multiple cords, and another computer if needed.
It's also possible that the board is temporarily disabled.
Since your phone still charges, the reverse polarity protection that is programmed into the chips have shut down certain components. Perhaps the phone is not actually damaged. But in a protection mode.
Try letting your battery go completely dead, use it until it shuts down, keep restarting it until it has no power left.
With all power removed from the battery, the reverse polarity protection should reset and your next charge and hopefully the phone will be back to normal.
I hope this helps.
Well, this is worrying news. I wonder how common this issue is, or what it's caused by--a bad non-Benson approved cable? A bad USB-C port? Cements the fact that it's safer to use a USB-C to USB-C cable (provided your computer has a USB-C port) rather than a USB-C to USB-A one... now I miss Micro USB's simplicity.
sk8223 said:
Well, this is worrying news. I wonder how common this issue is, or what it's caused by--a bad non-Benson approved cable? A bad USB-C port? Cements the fact that it's safer to use a USB-C to USB-C cable (provided your computer has a USB-C port) rather than a USB-C to USB-A one... now I miss Micro USB's simplicity.
Click to expand...
Click to collapse
its happen to me with orginal cable
tsongming said:
Unfortunately, you may have fried a component on the usb board.
This can happen if you have the usb c inserted in the phone and then plug the A side into the power block.
You can order a new card here: https://www.ebay.com/itm/162671342875?ul_noapp=true If you live near a large city you should be a to find a cell repair shop that can install it for you, should cost more then $50 to $60 dollars or you can send your phone to these guys for repair for probably close to the same price http://leecoservicecenter.com/
Perhaps you can get the usb to computer working by trying this: ( worked for me)
Make sure that your computer is up to date with its usb drivers.
shut down the computer and remove all peripherals, keep unplugged except for keyboard and mouse.
restart
Boot your phone into recovery, and plug your usb cable into one of the computers primary usb ports: usually in the back.
Wait to see if your computer recognises the device.
If it doesn't and you use Windows go to Device Manager
In the Start menu, right-click Computer | Manage, then expand Computer Management on the console tree and select System Tools | Device Manager
In the Start menu, right-click Computer Properties, then click Device Manager on the left pane
Control Panel | Device Manager
Control Panel | Hardware and Sound | Device Manager
Look for the usb card. see if your device is listed there, and update the drivers. Heres a step by step : https://www.drivereasy.com/knowledge/how-to-fix-unknown-devices/
Try multiple cords, and another computer if needed.
It's also possible that the board is temporarily disabled.
Since your phone still charges, the reverse polarity protection that is programmed into the chips have shut down certain components. Perhaps the phone is not actually damaged. But in a protection mode.
Try letting your battery go completely dead, use it until it shuts down, keep restarting it until it has no power left.
With all power removed from the battery, the reverse polarity protection should reset and your next charge and hopefully the phone will be back to normal.
I hope this helps.
Click to expand...
Click to collapse
thank you very much
i tried but it won't work
my phone is x727 the replacement part is for x720
is that working?
mchlbenner said:
Do have fastboot working.
Sent from my LEX727 using xda premium
Click to expand...
Click to collapse
nope whole USB data not working
but its charging only
sa1wan said:
thank you very much
i tried but it won't work
my phone is x727 the replacement part is for x720
is that working?
Click to expand...
Click to collapse
Have you try boot into Fastboot mode? Hold Power button + Volume down and connect phone to pc with type-c cable.
I have Le Max2 x829, Le Pro3 x720,x722 never have any issue, I bought phone from Bangood, x720 locally.
Moon75 said:
Have you try boot into Fastboot mode? Hold Power button + Volume down and connect phone to pc with type-c cable.
I have Le Max2 x829, Le Pro3 x720,x722 never have any issue, I bought phone from Bangood, x720 locally.
Click to expand...
Click to collapse
ts and my get production defects , not all....who know...all phone has shipment not 100% perfect
sa1wan said:
thank you very much
i tried but it won't work
my phone is x727 the replacement part is for x720
is that working?
Click to expand...
Click to collapse
Yes, the the X720 and the X727 are identical, the difference is the firmware.
So a board advertised as X720 will work.
---------- Post added at 08:15 AM ---------- Previous post was at 08:00 AM ----------
sa1wan said:
nope whole USB data not working
but its charging only
Click to expand...
Click to collapse
There is still hope: You haven't had the chance to retry once the battery is fully discharged, it may work.
I used to work for Apple Support and I have personally used that as a solution, many times to resolve open support cases. With iPhones that had the exact same issue.
After it's all sorted out. Be sure to buy high quality replacement cables that come with a warranty. I replaced all of the usb c cables my house with new ones that are IF certified. i read about others having this exact issue months ago and I procrastinated.
Hopefully, it works out.
What build twrp do you have?
You can reformat your twrp this fix your USB problem.
Fastboot on this phone volume down power down same time.
If you get fastboot working try this twrp.
https://mega.nz/#!YMojxQgI!Pa1kh_p2dRwTMdPPG-xEpCGeVdtqMvritlp8cH9zpp8
http://forum.xda-developers.com/showthread.php?p=72206979
Sent from my LEX727 using xda premium
mchlbenner said:
What build twrp do you have?
You can reformat your twrp this fix your USB problem.
Fastboot on this phone volume down power down same time.
If you get fastboot working try this twrp.
https://mega.nz/#!YMojxQgI!Pa1kh_p2dRwTMdPPG-xEpCGeVdtqMvritlp8cH9zpp8
http://forum.xda-developers.com/showthread.php?p=72206979
Sent from my LEX727 using xda premium
Click to expand...
Click to collapse
stiil not working
ajegile said:
stiil not working
Click to expand...
Click to collapse
If have experience building computers, or have ever replaced a broken lcd to screen you may consider replacing the board yourself.
Hers a video that shows how its done: https://www.youtube.com/watch?v=Y0oC4nPMXzM
Here is the teardown for our phone: http://www.myfixguide.com/manual/leeco-le-pro-3-teardown/
tsongming said:
If have experience building computers, or have ever replaced a broken lcd to screen you may consider replacing the board yourself.
Hers a video that shows how its done: https://www.youtube.com/watch?v=Y0oC4nPMXzM
Here is the teardown for our phone: http://www.myfixguide.com/manual/leeco-le-pro-3-teardown/
Click to expand...
Click to collapse
That video is for lg g6 not lecco pro 3.
Lg is easy I have many of them who know what is inside this phone.
Sent from my LEX720 using xda premium
My this
https://m.youtube.com/watch?v=QFH0z8DPd0o
mchlbenner said:
That video is for lg g6 not lecco pro 3.
Lg is easy I have many of them who know what is inside this phone.
Click to expand...
Click to collapse
Are you serious!
The point was to demonstrate how easy it is, with a high quality video. Next, anyone who's ever taken these phones apart knows the steps are similar, and opening the phone with a heat gun while not damaging anything, obviously crucial.
If you read the entire post you would had noticed the link for the LeEco? See we know what's inside now.... Pretty much the same layout.
Not only is the interior is very similar. The G6 and the x727/x720 have similar specs.
I am actually doing this repair myself on one of my Le pro 3s as soon as the board arrives.
But, I don't have the time or the motivation to make a video when plenty exist.
---------- Post added at 07:34 AM ---------- Previous post was at 07:28 AM ----------
ajegile said:
My this
https://m.youtube.com/watch?v=QFH0z8DPd0o
Click to expand...
Click to collapse
Nice find! Although also not the same phone, it's still virtually the same steps.
Go for it dude. It's not that hard as long as you are careful. Make sure you get the right sealant for resealing it back together.
You can also use double sided tape :https://www.amazon.com/Eco-Fused-Adhesive-Sticker-Phone-Repair/dp/B00BXYWXV6
tsongming said:
Are you serious!
The point was to demonstrate how easy it is, with a high quality video. Next, anyone who's ever taken these phones apart knows the steps are similar, and opening the phone with a heat gun while not damaging anything, obviously crucial.
If you read the entire post you would had noticed the link for the LeEco? See we know what's inside now.... Pretty much the same layout.
Not only is the interior is very similar. The G6 and the x727/x720 have similar specs.
I am actually doing this repair myself on one of my Le pro 3s as soon as the board arrives.
But, I don't have the time or the motivation to make a video when plenty exist.
---------- Post added at 07:34 AM ---------- Previous post was at 07:28 AM ----------
Nice find! Although also not the same phone, it's still virtually the same steps.
Go for it dude. It's not that hard as long as you are careful. Make sure you get the right sealant for resealing it back together.
You can also use double sided tape :https://www.amazon.com/Eco-Fused-Adhesive-Sticker-Phone-Repair/dp/B00BXYWXV6
Click to expand...
Click to collapse
Are you serious don't give people bad ideas phone are different inside I have done hundreds of repairs OK.
Some like lg are easy but are a pain to do.
If they that experience I say go for it .
That like giving a person a truing tools and say go for 9 out of 10 will mess up their wheels.
Sent from my LEX727 using xda premium
mchlbenner said:
Are you serious don't give people bad ideas phone are different inside I have done hundreds of repairs OK.
Some like lg are easy but are a pain to do.
If they that experience I say go for it .
That like giving a person a truing tools and say go for 9 out of 10 will mess up their wheels.
Click to expand...
Click to collapse
You obviously ignored all of the previous posts in which provided all of those caveats. I.E. using a local service provider, or the 3rd party LeEco service site that I provided the link for, among all of the other warnings that I provided in my multiple posts!
Understand, I am actually trying to help someone, and not simply waiting by to make a comment on post that I disagree with. No, I have better things to do.
By the way what valuable service did you provide ? You have repaired so many phones, why not offer your services to fix it for the OP. While you cannot solicit the OP in a post you could PM him.
We both have decades of experience, so what!
I do not provide 3rd party service, on phones.
But, I am willing to do is provide reasonable advice. Buts make it clear, anyone who has experience with component level repair and troubleshooting will understand that this is far from being difficult.
Disassemble the phone, disconnect the wires, insert new USB card, reassemble everything Honestly, my 13 year old daughter could do this. But, she did grow up in a technical environment.
As far as I can ascertain, an important aspect of XDA is sharing information and helping others. Is this why you sign in?
At the end of the day, I don't know you or your history. If you have a long posting history of being helpful and providing expert guidance then please accept my apologies, if I offended you.
I enjoy helping others, it's what I do for a living.
By the way, my answers was also intended as advice for Aegile
Related
If you are having problems getting to download mode, Use the Stock Captivate Cable Only when trying to access Download mode!
Story:
I have struggled with 2 captivates now to get into download mode. I have read tons of arguments back and forth from people that say it is easy to get into download mode, and people who say that it is impossible with their phones.
Well, for some history...On my first captivate, I bricked it and it refused to go into download mode...PERIOD. I proceeded to exchange it(I was within my 30 days), and didn't think much more about it. Well, I installed Cognition 2.2 recently and in the process realized that my new phone would go into download mode just fine by doing the standard process of:
1)remove battery, sim, microsim
2)reinserting battery only
3)holding down both volume buttons
4)inserting usb cable
No problems right? Well, I ended up "bricking" my phone by accidentally deleting my framework-res.apk file(don't ask) and lo and behold, I suddenly could not get it to go back into download mode. I was really pissed at this point and spent all night trying everything all over again.
Well, I decided to give up for the night and go to bed. As I was laying in bed a thought crossed my mind. I had purchased a second usb cable(from ATT) to use with the captivate, and the one time that download mode had worked, I was using the standard captivate cable that came in the box. However, every time it wasn't working I was using my second USB cable. So I got up out of bed to try the stock cable and, lo and behold, it works flawlessly every time.
I would venture to guess that this is what the problem is with most everyone else that can not get their captivates to go into download mode. So, if you haven't tried it give it a shot. And certainly tell everyone you know to use the stock cable only.
I just want to reiterate that the spare cable that would NOT work was purchased from ATT and is the cable that they recommend you purchase as a spare. It wasn't like I got it from ebay or something.
Using a usb cable I got from ebay, monoprice, htc, motorola, and stock samsung cable, I was able to get into download mode everytime...
... also, shouldn't this be in general and not in development?
No USB Hubs or Extenders
RECOMMENDED: Use your stock USB cable that came with the phone.
IMPORTANT: Plug the USB cable into your computers native motherboard USB port (the back of your computer). Plugging the cable into USB switches, extenders or external ports, does not allow the phone to enter download mode correctly.
Aerimus said:
I just want to reiterate that the spare cable that would NOT work was purchased from ATT and is the cable that they recommend you purchase as a spare. It wasn't like I got it from ebay or something.
Click to expand...
Click to collapse
I can confirm, although i found this out a whilllllle ago, just didnt think much of it lol
Just so you know. I found that in some cases certain USB cables just will not work with some devices. This has to do with the quality of the cable. I would avoid overly thin or flat cables because they tend to be cheaply made and won't be able to provide a stable power flow. The shorter the cable the better.
shinji257 said:
The shorter the cable the better.
Click to expand...
Click to collapse
The cable he/I bought from AT&T is shorter the the cable that comes in the box, and doesnt work, so im not sure if shorter is better
kkeo said:
Using a usb cable I got from ebay, monoprice, htc, motorola, and stock samsung cable, I was able to get into download mode everytime...
... also, shouldn't this be in general and not in development?
Click to expand...
Click to collapse
I can recreate this over and over again. The reason I put this here and not in general is because I, like many others, have struggled over and over with odin, and people had the attitude of "it works every time, you're just doing something wrong." The reality is that you're trying to prove that I'm just "doing something wrong" because all your cables work. I can recreate this over and over again. What do you want me to do, make a video of it in order for you to believe that there is an actual issue?
I think it's important for people to see this when trying all the roms and mods that are in the development section. In fact, I think it would be REALLY helpful if designgears would add this to the "how to get to download mode" section on the Odin thread. I can't tell you the amount of hours I have spent trying to get into download mode. It is incredibly frustrating to do everything right, and have others telling you that you are not doing it right.
I searched google endlessly looking for a solution to get into download mode, and no where did I see this as a possible solution. Also, as an FYI, when I plug in the other cable, it just goes straight to the battery screen no matter what I press. I can hold down the power and volume buttons to go into recovery mode, but it's impossible to get to download mode.
I have plugged mine into a usb port in the front of my computer as well as in my monitor. I have never had a problem with download mode or anything else.
Aerimus said:
I can recreate this over and over again. The reason I put this here and not in general is because I, like many others, have struggled over and over with odin, and people had the attitude of "it works every time, you're just doing something wrong." The reality is that you're trying to prove that I'm just "doing something wrong" because all your cables work. I can recreate this over and over again. What do you want me to do, make a video of it in order for you to believe that there is an actual issue?
I think it's important for people to see this when trying all the roms and mods that are in the development section. In fact, I think it would be REALLY helpful if designgears would add this to the "how to get to download mode" section on the Odin thread. I can't tell you the amount of hours I have spent trying to get into download mode. It is incredibly frustrating to do everything right, and have others telling you that you are not doing it right.
I searched google endlessly looking for a solution to get into download mode, and no where did I see this as a possible solution. Also, as an FYI, when I plug in the other cable, it just goes straight to the battery screen no matter what I press. I can hold down the power and volume buttons to go into recovery mode, but it's impossible to get to download mode.
Click to expand...
Click to collapse
While this is good to know...It is quite possible you got a faulty second cable, and some of the cables that do come in the box are faulty as well..
It's always a good reminder to try changing out cables if your having an issues. Same for downloading different things that work for a-lot of people and not for you/me..same too for hooking into the back of the computer and bypassing the external hub....Sometimes you get lucky and find the problem right away..sometimes you don't....It's called a process of elimination...
FWIW..I've never trusted cheap ass cables..in anything. Never have..Never will..but..JSYK..expensive cables go bad from time to time too
Thanks for the reminder
Mac
jromney said:
RECOMMENDED: Use your stock USB cable that came with the phone.
IMPORTANT: Plug the USB cable into your computers native motherboard USB port (the back of your computer). Plugging the cable into USB switches, extenders or external ports, does not allow the phone to enter download mode correctly.
Click to expand...
Click to collapse
I use the external ports on the front of my case without a problem...
jromney said:
RECOMMENDED: Use your stock USB cable that came with the phone.
IMPORTANT: Plug the USB cable into your computers native motherboard USB port (the back of your computer). Plugging the cable into USB switches, extenders or external ports, does not allow the phone to enter download mode correctly.
Click to expand...
Click to collapse
I've also noticed that, on my PC at least, my front case USB ports don't always reliably work with this procedure. I've been plugging the USB cable since into the USB ports on the motherboard.
Mac11700 said:
While this is good to know...It is quite possible you got a faulty second cable, and some of the cables that do come in the box are faulty as well..
It's always a good reminder to try changing out cables if your having an issues. Same for downloading different things that work for a-lot of people and not for you/me..same too for hooking into the back of the computer and bypassing the external hub....Sometimes you get lucky and find the problem right away..sometimes you don't....It's called a process of elimination...
FWIW..I've never trusted cheap ass cables..in anything. Never have..Never will..but..JSYK..expensive cables go bad from time to time too
Thanks for the reminder
Mac
Click to expand...
Click to collapse
The thing that throws me off is that this cable works for EVERYTHING else. Data transfer, media syncing, recovery mode, charging, etc... There was never anything that would indicate any issue with the cable. I just want to make sure everyone knows this, because when I was struggling to get into download mode, I didn't see anyone suggest that it could be the cable, even though the cable worked for everything else.
OP - thanks for posting this! It is at least another thing to keep in mind when troubleshooting. I was actually considering getting another cable to keep at work.....
P.S. would we get in trouble for quoting Michael Scott's favorite joke in response to post #6? Yea, I know. Little too obvious right. I'll restrain. Already made myself chuckle anyways
terrigan said:
I've also noticed that, on my PC at least, my front case USB ports don't always reliably work with this procedure. I've been plugging the USB cable since into the USB ports on the motherboard.
Click to expand...
Click to collapse
Um.. not true - Although I did use the stock USB Cable - I was flashing the night away (trying to recover my bricked phone) on my Win7 box using a USB hub that had a few other devices hooked into it.
Never had an issue getting to D/L mode.. and it found the phone again and again and again and again.... (go on for infinity).
I think it has more to do with the hardware your connecting it to and how the USB drivers loaded (i.e. XP=****e) and what type of OS your running more than anything. I had terrible luck with my work's XP rig... but my Win7 x64 rig found the device while in d/l mode - found the drivers?!?! and I was good to go.
Although - it is always a good rule of thumb IF you can't get the device to recognize on your computer to use the original cable and hook to the best source of power for your USB which is the back of your computer.
So.. this isn't a [FIX] - just a good tip. If you can't get into D/L mode by holding the volume button and jamming in the USB or using ADB -> Reboot Download command.. your pretty much fux0red.
I need original USB cable
I just wanted to throw in my $0.02 I needed to use the original USB cable and a port directly on my motherboard. The usb cable I bought from newegg does not work with my MSI X58 motherboard and my capitavate. The original cable does not work if I use a front usb port on my Antec P183 case. Strangly an identical usb cable from newegg that I ordered at the same time does work with my work computer, Dell X38 motherboard.
Ive had the same problem... only way i get it to download mode is via Terminal:
su
reboot download
I really cant get it to work no other way :s
jromney said:
RECOMMENDED: Use your stock USB cable that came with the phone.
IMPORTANT: Plug the USB cable into your computers native motherboard USB port (the back of your computer). Plugging the cable into USB switches, extenders or external ports, does not allow the phone to enter download mode correctly.
Click to expand...
Click to collapse
honestly, i have my phone cord that came into the box, connected to an extender cable, that's connected into a usb port hub so i don't agree with what you're saying here
mine works every single time
This method has been known for some time now, reading really helps...
http://forum.xda-developers.com/showthread.php?t=731989
designgears said:
This method has been known for some time now, reading really helps...
http://forum.xda-developers.com/showthread.php?t=731989
Click to expand...
Click to collapse
I appreciate all your hard work on everything. I read through that post and tried to search it several times... Believe me, I spent hours pouring through the pages looking for something that would work.
No where did I see anyone say to make sure you were using the stock cable because other cables might not work? Feel free to correct me if I'm wrong...there are a lot of pages after all.
Furthermore...I'm sorry to be new to Android and to flashing roms, but we are all new at some point. No one is born an expert.
edit: I'm guessing you misunderstood the post? I wasn't posting about the method...just about the fact that many usb cables, including the micro usb cable that ATT sells, do not work for getting to download mode. If I'm wrong about what you were posting, feel free to correct me. If i'm correct, your post is quite ironic
The first captivate I had WOULD NOT GO INTO DOWNLOAD mode regardless of cable or usb port. I tried every port and every cable including the stock one that came with the phone.
The replacement captivate ALWAYS goes into download mode regardless of cable or port.
It's a tip and thank you for the. But if your phone is one of those that does not have 3 button recovery then it will likely not work with the 2 button download trick either.
Well,
My Lepro 3 has a very very strange problem :
Everything started Monday : it was at 20% and he just switched off, and then did 0 sign of life for like 4 hours (it was charging, but no led, etc..). After those 4 hours, the red light started blinking but still. And after 1 hour, I was able to boot (he had 10%). I decided to reset the rom, however, there was no way to get the phone recognized by my computer. I then decided to go to sleep and to charge to 100% the phone. Of course, nothing changed. And i even realized something worst : it takes like 5-6 hours to get to 100%, and it was 1h30 before.
FURTHERMORE : my lepro 3 isnt recognized on any PC, and neither in fastboot mod.
PLUS :
- when switched off, he won't power ON if i plug him to usb/sector.
- when powered on, he will vibrate TWICE when plugged to usb/sector : charging for 1 sec, then not charging for one sec, and then charging (like if he was trying to fast-charge, fails, and then switched to low-speed-charging
- when switched off, i sometimes need to press power for 10sec+ to get him booting
- I tried different cables
- tried usb debugging on/off
I don't know what i can try.. the only way seems to reset it with adb-wireless by pushing him a new rom but well..
I think it is a problem with my USB-C port (lepro 3 side) and i guess it is not using fast charging anymore
However, my headphones (usb-c) still work
Thanks in advance...
PS : I forgot to mention that i am running with Cydras Google-like rom 0.20S
I would switch to see makes a difference I have used that ROM without issue
Sent from my LEX720 using xda premium
mchlbenner said:
I would switch to see makes a difference I have used that ROM without issue
Click to expand...
Click to collapse
Well I don't really know how to change the rom with no USB access.. Dunno if adb wireless is safe
Moreover, since the phone doesn't power up when off and plugged.. I guess the rom has nothing linked with this.. But maybe i'm wrong ! Could it be the kernel ?
Elerir9 said:
Well I don't really know how to change the rom with no USB access.. Dunno if adb wireless is safe
Moreover, since the phone doesn't power up when off and plugged.. I guess the rom has nothing linked with this.. But maybe i'm wrong ! Could it be the kernel ?
Click to expand...
Click to collapse
Have you installed USB drivers or have already did USB work before?
Sent from my LEX720 using xda premium
mchlbenner said:
Have you installed USB drivers or have already did USB work before?
Sent from my LEX720 using xda premium
Click to expand...
Click to collapse
Usb was working before
I just realized that when the phone is off :
if :
i plug it : nothing happen
i try to power it on : it vibrates one but doesnt boot
I need to unplug it and then to power it on
EDIT : I just managed to install twrp with flashify, but i would like to know if it will be useful to install a new rom or if it won't change anything....
Elerir9 said:
Usb was working before
I just realized that when the phone is off :
if :
i plug it : nothing happen
i try to power it on : it vibrates one but doesnt boot
I need to unplug it and then to power it on
EDIT : I just managed to install twrp with flashify, but i would like to know if it will be useful to install a new rom or if it won't change anything....
Click to expand...
Click to collapse
Do you have debugging click if so unclick it and if it works then.
Sent from my LEX720 using xda premium
mchlbenner said:
Do you have debugging click if so unclick it and if it works then.
Sent from my LEX720 using xda premium
Click to expand...
Click to collapse
I've already tried and nothing changed
EDIT : well i changed the rom.. and i still have the same problem (+ i had big issues insalling AICP 8.0 ... something was wrong with Error 7. I had to change the updater-script, that was scarry but i was kinda sure of what i was doing so.. i did it and the rom booted well)
Elerir9 said:
I've already tried and nothing changed
EDIT : well i changed the rom.. and i still have the same problem (+ i had big issues insalling AICP 8.0 ... something was wrong with Error 7. I had to change the updater-script, that was scarry but i was kinda sure of what i was doing so.. i did it and the rom booted well)
Click to expand...
Click to collapse
If could your USB cord but I would flash a different rom a see if problem persist.
Sent from my LEX720 using xda premium
mchlbenner said:
If could your USB cord but I would flash a different rom a see if problem persist.
Sent from my LEX720 using xda premium
Click to expand...
Click to collapse
Please read what I've already tried
You recommended a new rom : i said i already tried
You asked for debugging mod : i said i already tried
You asked for a different cable : i said i already tried
But still thanks for your help
EDIT : With the new rom (AICP 7.1.2) it's even worst : doesn't even charge when android booted, the only way to make it charging it to boot in recovery mod and to plug it
Elerir9 said:
Please read what I've already tried
You recommended a new rom : i said i already tried
You asked for debugging mod : i said i already tried
You asked for a different cable : i said i already tried
But still thanks for your help
Click to expand...
Click to collapse
Did you try different port or different computer if not this it is hardware issue.
Sent from my LEX720 using xda premium
mchlbenner said:
Did you try different port or different computer if not this it is hardware issue.
Sent from my LEX720 using xda premium
Click to expand...
Click to collapse
Yeah I tried..
It sounds like your usb card is fried.
I had this exact issue 2 months ago, I was lucky that the vendor exchanged it for a brand new phone.
It was probably fried by your usb cable. See if you can exchange the phone under warranty. Ask the vendor that you purchased it from, to honor the warranty, since contacting Leeco is difficult. Worst case, you will need to replace the USB card, its about $10.
VYeah, i guess it's the USB card... But there are two problems :
- its pretty Hard to disassemble a lepro 3
- i think that the original pro3 USB card comes with the vibrer, the speaker, and the microphone, and i didnt find any USB card with all of this on aliexpress...
He is no longer under warranty (15months vs 12)
Edit : another strange effect is that on cydras's ROM, the phone actually charges when powered on (but slow). On AICP 7.1.2, it juste says "plugged, not charging" when powered on
Elerir9 said:
VYeah, i guess it's the USB card... But there are two problems :
- its pretty Hard to disassemble a lepro 3
- i think that the original pro3 USB card comes with the vibrer, the speaker, and the microphone, and i didnt find any USB card with all of this on aliexpress...
He is no longer under warranty (15months vs 12)
Edit : another strange effect is that on cydras's ROM, the phone actually charges when powered on (but slow). On AICP 7.1.2, it juste says "plugged, not charging" when powered on
Click to expand...
Click to collapse
How long did you have it?
Sent from my LEX727 using xda premium
15 months
Elerir9 said:
15 months
Click to expand...
Click to collapse
If you bought new I through they a one warranty.
But no support by leeco.
I personal would not recommend any to buy from this crappy company.
Sent from my LEX727 using xda premium
I have exactly the same problem, you decribed it to the letter.
Did you ever found a way to fix it?
Or did you buy another usb card?
If so which one?
If any one has any information related to thsi case i really could use your help..
daatyson said:
I have exactly the same problem, you decribed it to the letter.
Did you ever found a way to fix it?
Or did you buy another usb card?
If so which one?
If any one has any information related to thsi case i really could use your help..
Click to expand...
Click to collapse
You are either bricked or its your battery, if bricked and the computer doesn't recognise the phone it still might recognise the port
Follow steps here to find out how: https://forum.xda-developers.com/le-pro3/how-to/unbrick-leeco-phones-leeco-variants-t3847220
tsongming said:
You are either bricked or its your battery, if bricked and the computer doesn't recognise the phone it still might recognise the port
Follow steps here to find out how: https://forum.xda-developers.com/le-pro3/how-to/unbrick-leeco-phones-leeco-variants-t3847220
Click to expand...
Click to collapse
Hey tsongming i have read quite a lot of posts from you in the last few days before commenting, i already tried before hand everything you said to get my phone detected by my computer and it still dosent get detected:
- tried multiple computers
- multiple cables
- and just in case, different driver versions.
Tried it all except the EDL Amazon cable you recommended in another one of your posts.
I have read that if i can't get it detected then theres nothing i can do.. which would suck.
ATM i have google pixel, beforehand i had AICP which worked really horrible on battery issues and would sometimes crash it. I have been using stock cable for 2 years which as i've read it the past few days is a terrible a ideia, and stock charger but as you say and qualcomm, i also believe its ok.
At this time i believe the problem might be a burned USB Card or the Battery itself bugging out(?) but since it charges when turned off (e.g: charged for 8 hours in supercharge to 84% =S), im clueless.
Since you said that you had the same issue on one of your Leeco, anything else you can recommend for me to try?
P.S: its worth noticing, i can Fastboot, Recovery to TWRP and turn it on, if indeed bricked i would call it a soft brick i guess..
daatyson said:
Hey tsongming i have read quite a lot of posts from you in the last few days before commenting, i already tried before hand everything you said to get my phone detected by my computer and it still dosent get detected:
- tried multiple computers
- multiple cables
- and just in case, different driver versions.
Tried it all except the EDL Amazon cable you recommended in another one of your posts.
I have read that if i can't get it detected then theres nothing i can do.. which would suck.
ATM i have google pixel, beforehand i had AICP which worked really horrible on battery issues and would sometimes crash it. I have been using stock cable for 2 years which as i've read it the past few days is a terrible a ideia, and stock charger but as you say and qualcomm, i also believe its ok.
At this time i believe the problem might be a burned USB Card or the Battery itself bugging out(?) but since it charges when turned off (e.g: charged for 8 hours in supercharge to 84% =S), im clueless.
Since you said that you had the same issue on one of your Leeco, anything else you can recommend for me to try?
P.S: its worth noticing, i can Fastboot, Recovery to TWRP and turn it on, if indeed bricked i would call it a soft brick i guess..
Click to expand...
Click to collapse
If you can boot to Fastboot and Recovery, Then its not bricked. Your software is probably corrupted from a power spike or short. Its possible that your issue is just the USB card, which you can find for under $10, on Alibaba, Ebay and even Amazon.
Note that when you remove the screen do not use a Hairdryer to heat up the glue, there is way too much glue! You will need to briefly use a heat gun , and the screen will slide off with ease, the display and battery connectors are the lego type.. There are demonstration videos on Youtube.
Since you are removing the screen, you might as well replace the battery while your at it ( It should not cost more than $12)
If you want to buy a Backup LCD they are about $18 to $25 . ( definitely, recommend since there is a good chance of breaking the LCD, that you currently have)
If you order the screen, remove your LCD screen first to make sure that you order the correct one. They come with either black or yellow Flex cables ( not sure why) But if you have yellow obviously order yellow.
Make sure that the USB card is all inclusive and includes the chips, you are better off to spend a few dollars more for the better quality board. Sometimes the cheap ones come with missing chips for quick charge and CDLA ( Read the reviews)
Good Luck.
If you don't feel comfortable doing this, you can find Leeco Repair with a Google Search, or you can use TaoBao to get a "guaranteed fix", for really cheap. ( Even if its the motherboard ) They replace components and resolder) I doubt its the motherboard, but it's possible. In my case, I fried the motherboard and the phone still came on , but would not boot to system, also the screen was very pixelated.
Hi all,
This thread is for all sorts of questions, from developing to general life.
I created this thread primarily to get rid of unrelated questions that are asked on various threads and to reduce clutter. So, if you got a question, ask here.
Note: everyone is encouraged to contribute to this thread.
Hi
You got your own thread that's fine
My IRULU,can't give me any sign of life
Is possibility I have destroyed it change wrong setting in BIOS?
And why laptop not have a battery pill on mainboard?
How to force BIOS to load default settings?
Have a China thl 5000 from 6 years and work wonderful, plastic body destroyed, fall from first floor crushed in the water, toilet but work
How possible but true
Bye and please help
landwinwand said:
Hi
You got your own thread that's fine
My IRULU,can't give me any sign of life
Is possibility I have destroyed it change wrong setting in BIOS?
And why laptop not have a battery pill on mainboard?
How to force BIOS to load default settings?
Have a China thl 5000 from 6 years and work wonderful, plastic body destroyed, fall from first floor crushed in the water, toilet but work
How possible but true
Bye and please help
Click to expand...
Click to collapse
The thread isn't mine, it's everyone's.
Okay, so the tablets don't have a cmos battery because of the form factor, instead their uefi firmware stores data on the chip itself. We need to trick the bios to make it appease corrupted so that the backup bios image gets restored. But we will need a photo of the bios chip to see what pins will be needed to short.
If your device has an hdmi port, then you can try connecting to a display, but i am not sure it will work.
Shorting the bios pins may not damage it if done correctly, but you take the risk.
And please, don't buy those chinese tablets, they will break down suddenly.
The chip with the green dot on it is the bios chip in my tablet. The alphanumerical code on it is what you'll need.
make screenshots of Motherboard
It has mini hdmi connector
Here we go
Thanks
landwinwand said:
make screenshots of Motherboard
It has mini hdmi connector
Here we go
Thanks
Click to expand...
Click to collapse
This is your bios chip (in the attachment). What does it read on it? Search google for the model of the chip like "winbond xxxxxxxxxx bios reset" (where xxxxxxx is your code on that chip).
Hi
I made with fino ....
Too little text but now can be reader
I have to search all the numbers?
Thanks
Hope for Victory
If you can't see well the screenshot
The info are
Winbond
25064FWIG
1532
6508
36800
Thanks much
landwinwand said:
If you can't see well the screenshot
The info are
Winbond
25064FWIG
1532
6508
36800
Thanks much
Click to expand...
Click to collapse
http://tricks10000.blogspot.com/2015/10/how-to-reset-ufei-cmos-of-windows.html?m=1
This site has some tips on what to short.
https://forums.tweaktown.com/gigabyte/33904-fix-dead-dual-bios-motherboard-flashing-failed.html
this site also has some tips, but not guaranteed to work.
just don't short wrong things, be careful
Nothing, happened, dead only CPU and coprocessor hot to cook eggs.
First irulu stop sign of life I see enter the BIOS without my needs,I see screen a white flash and after nothing.
I think the screen dead or coprocessor
Because when I put the charge the blue led is on.
But also when I connect the keyboard the power on led remain off.
If you want and have superpowers I send to you,and you can see if fix
Or I buy a cheap china chuwy 3g dual OS,win+android 7
And 2 years warranty.
What you think about
Bye
landwinwand said:
Nothing, happened, dead only CPU and coprocessor hot to cook eggs.
First irulu stop sign of life I see enter the BIOS without my needs,I see screen a white flash and after nothing.
I think the screen dead or coprocessor
Because when I put the charge the blue led is on.
But also when I connect the keyboard the power on led remain off.
If you want and have superpowers I send to you,and you can see if fix
Or I buy a cheap china chuwy 3g dual OS,win+android 7
And 2 years warranty.
What you think about
Bye
Click to expand...
Click to collapse
Your device is fine, just the bios needs to be reset or reflashed. Can you try entering DnX mode? But you'll need your firmware files (stock rom).
What's dnx mode
Explain me
I do short pin 2 with charge in no luck!
It has a reset button,but no luck,!
Where's the ground in my tablet
Different motherboard from the link you give
Want try again........
Bye
landwinwand said:
What's dnx mode
Explain me
I do short pin 2 with charge in no luck!
It has a reset button,but no luck,!
Where's the ground in my tablet
Different motherboard from the link you give
Want try again........
Bye
Click to expand...
Click to collapse
Dnx mode is like qualcomm's download mode, but on intel baytrail devices. On my tablet, you enter using pressing vol up + vol down + power.
This method will work IF you have stock firmware and ONLY IF the stock firmware has a bios image. If you don't have stock firmware or it doesn't contain bios image then don't bother.
What confusion
But why they do a reset button?
I press it but nothing happen
It's not equipped baytrail,want me send your house irulu,you can see if you can beat or use as
A floating disk.
I switch for a cheap chuwy tablet,I have no money
To spend for a trusted tablet.
Thank
I am the only one in this thread has encounter issues, but without fixed
See if Christpp are ready to trow us OREO for fino
Bye
---------- Post added at 05:15 PM ---------- Previous post was at 05:11 PM ----------
Has you got phone calls recording settled automated for every call you received.
Because I don't find a solution and every call I received have to record manually
And other recording apps don't work
Bye
landwinwand said:
What confusion
But why they do a reset button?
I press it but nothing happen
It's not equipped baytrail,want me send your house irulu,you can see if you can beat or use as
A floating disk.
I switch for a cheap chuwy tablet,I have no money
To spend for a trusted tablet.
Thank
I am the only one in this thread has encounter issues, but without fixed
See if Christpp are ready to trow us OREO for fino
Bye
---------- Post added at 05:15 PM ---------- Previous post was at 05:11 PM ----------
Has you got phone calls recording settled automated for every call you received.
Because I don't find a solution and every call I received have to record manually
And other recording apps don't work
Bye
Click to expand...
Click to collapse
That reset button resets OS, not the bios.
Keep that tablet, maybe you will solve the problem later. Give it to a PC repair store, tgey must have equipment to flash a damn bios chip.
About the call recording, tasker might help although i don't know how to manage it, so don't ask.
Hey strange things happened
Now I press on button
I put USB charger and my phone begin to charge
And I put in USB keyboard and charge work(I try to discarging irulu battery)
But the keyboard light off
If I press power on and hold 10 sec.the irulu shut down(and USB stop charge same keyboard USB,)
Now I got the problem, is possibility I have changed video to mini HDMI port
Or the screen glass is broken
I have do the short on USB ground
You have to help me more bro
I order a mini HDMI to HDMI to assure this too
Bye
landwinwand said:
Hey strange things happened
Now I press on button
I put USB charger and my phone begin to charge
And I put in USB keyboard and charge work(I try to discarging irulu battery)
But the keyboard light off
If I press power on and hold 10 sec.the irulu shut down(and USB stop charge same keyboard USB,)
Now I got the problem, is possibility I have changed video to mini HDMI port
Or the screen glass is broken
I have do the short on USB ground
You have to help me more bro
I order a mini HDMI to HDMI to assure this too
Bye
Click to expand...
Click to collapse
If you know how to enter the bios, then press F9 and enter to return to default settings.
Only both USB seem work and Bluetooth
Want pair
But keyboard lights off
Mean keyboard don't do anything because
Is off.
I try USB keyboard but off.
I hear no sounds .
Another hints?
Seem likely the irulu is possessed by an obscure presence
Only HDMI can do the clue.
But BIOS technically if I remove an hardware's don't seem to emits sounds.
I admitting no buy irulu tablet in future.
I want a tablet is easy to recovered even in BIOS corrupted situations.
Can you give me the name of a laptop fit this
Specs,strongly and easy .
Bye thank for supporting me in this adventure but with a dead ending.
Bye and go for fino now .
landwinwand said:
Only both USB seem work and Bluetooth
Want pair
But keyboard lights off
Mean keyboard don't do anything because
Is off.
I try USB keyboard but off.
I hear no sounds .
Another hints?
Seem likely the irulu is possessed by an obscure presence
Only HDMI can do the clue.
But BIOS technically if I remove an hardware's don't seem to emits sounds.
I admitting no buy irulu tablet in future.
I want a tablet is easy to recovered even in BIOS corrupted situations.
Can you give me the name of a laptop fit this
Specs,strongly and easy .
Bye thank for supporting me in this adventure but with a dead ending.
Bye and go for fino now .
Click to expand...
Click to collapse
Technically, it's not the tablet's fault, you changed some incompatible settings.
Yea, they compiled a ****ty bios, but chuwi won't be better. They're all the same, manufactured in a same place but with different branding.
I'd say, look for refurbished laptops or netbooks, like from asus, dell, hp, you get it. They will last longer than these chinese tablets. If you find one in a mint condition.
HDMI mini to HDMI cable when tomorrow I try
Tell me I remembered
I select under USB tab legacy on
What's and what do that
I also under screen have selected HDMI.
If I sure this,because,the tablet is on,screen is off
Usb charge only,keyboard is off
China tablet same china microsd card.
But THL is a China phone and work great and I have from 7 years paying $178,
But I don't love to loose, I wants revenge,i sell PC and repairs from 8 years, no one in my life I have destroyed.
Bye
Wondering where I was? me too.
Long time has passed since the start of this post (almost 4 years to be exact), so I decided to finalize this finally and release the fully fledged guide. Interesting how this all got here just because me, a dumbass, formatted his Lumia 920 in Mass-Storage Mode in 2016.
So let's start.
First of all, make sure your device isn't in QHSUSB_DLOAD. After all if it is, you can just flash with WDRT or Thor2, and not spend so much time on that (see my video on how to recover from QHSUSB_DLOAD).
Step 1
Disassemble your Lumia. You can use online video guides or just a service manual, doesn't really matter.
Step 2
Find the schematics of your device, most if not all are available online, afterwards, find R3209 resistor, yes, that legendary resistor which will force the device to QHSUSB_DLOAD.
Step 3
After finding it in schematics, find it on your device, approximately, since it is most likely under a metal shield, once found the approximate location, remove the shielding with heat, or if you are like me, start cutting it like death is coming.
Step 4
Now the interesting part, reconnect your phone's battery, this will ensure the phone isn't in any sort of state and is powered off. After, short the resistor to ground and connect your phone to PC while shorting, wait 2 seconds and remove the short.
Step 5
Voila!
Take a look at my video on how to recover from QHSUSB_DLOAD, and recover your Lumia using it.
Can you explain why you think this works?
I do this to Lumias that don't get detected but without cutting my USB cable. Pop the battery cable off the board and plug the cable into the phone. Then plug the battery cable ribbon back into the motherboard. Worked for me that way...
nate0 said:
Can you explain why you think this works?
I do this to Lumias that don't get detected but without cutting my USB cable. Pop the battery cable off the board and plug the cable into the phone. Then plug the battery cable ribbon back into the motherboard. Worked for me that way...
Click to expand...
Click to collapse
Sorry, but there are Lumias in the wild that doesn't support that way of connection.
They just don't get connected.
gmirz2005 said:
Sorry, but there are Lumias in the wild that doesn't support that way of connection.
They just don't get connected.
Click to expand...
Click to collapse
Right, I get that.
My question is more about if you understand what is happening when you trigger it to cycle on this way?
nate0 said:
Right, I get that.
My question is more about if you understand what is happening when you trigger it to cycle on this way?
Click to expand...
Click to collapse
When you make the edl cable and hold the button while turning the lumia on, the cable works like a short jig. As in every device, the CPU is "starting" first, there's command that is implemented in the CPU that switches the device to EDL mode but in this case, as the boot is dead, it switches to Qualcomm F006 Mode in other words, Qualcomm Modem Mode, which is normal for hard bricked devices.
I read a guide about unbricking a DragonBoard 410c but it's done using some base firmware files which we don't have.
gmirz2005 said:
When you make the edl cable and hold the button while turning the lumia on, the cable works like a short jig. As in every device, the CPU is "starting" first, there's command that is implemented in the CPU that switches the device to EDL mode but in this case, as the boot is dead, it switches to Qualcomm F006 Mode in other words, Qualcomm Modem Mode, which is normal for hard bricked devices.
I read a guide about unbricking a DragonBoard 410c but it's done using some base firmware files which we don't have.
Click to expand...
Click to collapse
Perfect! This is what I needed. Thanks.
My next question would be, how does this change for USB type c windows phone hardware or is it even applicable?
I'm assuming it should be in some way applicable, but it might depend on the device. So what might work for Lumias might not apply to Alcatel hardware etc. or vice versa.
I ask this because I have a few hard bricked devices either in QC USB modem mode or the like.
Another question would be can this method be used to boot a device into edl/USB modem mode even if it is not hard bricked yet?
nate0 said:
Perfect! This is what I needed. Thanks.
My next question would be, how does this change for USB type c windows phone hardware or is it even applicable?
I'm assuming it should be in some way applicable, but it might depend on the device. So what might work for Lumias might not apply to Alcatel hardware etc. or vice versa.
I ask this because I have a few hard bricked devices either in QC USB modem mode or the like.
Another question would be can this method be used to boot a device into edl/USB modem mode even if it is not hard bricked yet?
Click to expand...
Click to collapse
Answering to your Question 1:
No, this is not applicable for USB Type C hardware Windows Phones, as they run completely differently (which I didn't do research about).
Answering to your Question 2:
No, this only works with Lumias with Bootloader Spec A, and not with other brand manufactured Lumias.
Answering to your Question 3:
Yes you can enter the QHUSB_DLOAD mode if the device is not even bricked.
hi dude, i have a problem my computer detects the phone as QHSUSB_BULK, do you think this tutorial can work? regards
Finsther said:
hi dude, i have a problem my computer detects the phone as QHSUSB_BULK, do you think this tutorial can work? regards
Click to expand...
Click to collapse
I don't know at this moment as I really screwed up my Lumia (battery blown).
But I think it will...
Could this work without disconnecting the battery? What is the reason for that?
I have a Lumia 1020 with the problems listed in this link: https://forum.xda-developers.com/showpost.php?p=78640119&postcount=830
thor2 seems to be useless with the same "authentication error" and WDRT also doesn't work.
Edit: Also, why is your battery blown? Is it because of this process?
Tiago117 said:
Could this work without disconnecting the battery? What is the reason for that?
I have a Lumia 1020 with the problems listed in this link: https://forum.xda-developers.com/showpost.php?p=78640119&postcount=830
thor2 seems to be useless with the same "authentication error" and WDRT also doesn't work.
Edit: Also, why is your battery blown? Is it because of this process?
Click to expand...
Click to collapse
My Battery is blown due to incorrect removing (it was glued)
Yes you need to disconnect the battery so the device looses full power so then you can enter to DLOAD mode
gmirz2005 said:
My Battery is blown due to incorrect removing (it was glued)
Yes you need to disconnect the battery so the device looses full power so then you can enter to DLOAD mode
Click to expand...
Click to collapse
Do you happen to know how to get the RDC files for Lumia phones? It looks like if I get that, I can fix my 1020 without openning it up.
Tiago117 said:
Do you happen to know how to get the RDC files for Lumia phones? It looks like if I get that, I can fix my 1020 without openning it up.
Click to expand...
Click to collapse
Umm...
I don't know
gmirz2005 said:
Umm...
I don't know
Click to expand...
Click to collapse
This is as far as I've went: https://protobetatest.com/2018/08/2...ust-got-a-prototype-what-do-i-need-to-do-now/
Would my Lumia 1020 with JTAG eFuse blown and without RnD certification (UEFI secure boot is enabled) work with this method? Could this circumvent these issues and still flash my phone back to its original FFU?
Thanks.
Tiago117 said:
Would my Lumia 1020 with JTAG eFuse blown and without RnD certification (UEFI secure boot is enabled) work with this method? Could this circumvent these issues and still flash my phone back to its original FFU?
Thanks.
Click to expand...
Click to collapse
Yes
nate0 said:
few hard bricked devices
Click to expand...
Click to collapse
Ah, geez, man!.. No comment, heh; but, had to -just- comment!! Pfft.
kgbme said:
Ah, geez, man!.. No comment, heh; but, had to -just- comment!! Pfft.
Click to expand...
Click to collapse
[emoji16]
Not anymore though. Sold every one of them . Except one. Even sold all my prototypes...
Trying it but not working. Phone still boots to same message of "Unable to find a bootable option".
Laptop not recognizing anything. Maybe the cable connections aren't correct.
Will try to directly short the green and black cables to one another with hands.
Also bought a new battery so should probably charge it fully first.
Edit: not working. Phone continues to boot to "Unable to find a bootable option".
The only difference is that with the short circuit between green and black, the laptop doesn't detect the phone.
Flash efiesp.bin partition from another phone using wpinternals.
Hi all,
Have just started to connect my device so i can pull the patched boot image for my thread and it won't see the computer, tried on several laptops and nothing, no adb, no fastboot.
It charges just fine but does not show the android usb system notification.
Really annoyed by this as i'm kind of stuck.
I'm on 7.7 but on a custom ROM / Evo X 5.9.1, doesn't look like anyone else has this issue besides me, have seen the odd user complaining about the same thing but haven't seen any fixes come up], if anyone has any ideas then i'd be grateful to get your two cents.
Will test MSM but it's not looking good, fearing a return to oneplus as i do have a good unit with none of the issues anyones ever listed like green screen and overheating problems.
It's usually me helping others but this time i need you guys help
Check USB cable / clean the Charging port? sometimes it helps.
dewa5227 said:
Check USB cable / clean the Charging port? sometimes it helps.
Click to expand...
Click to collapse
Aye I've cleaned it up mate.
Tried different cables, I think EDL mode is working.
Means I could maybe return to OOS but it wouldn't let me back up..
Shame, I'm just downloading MSM now... Really annoyed..will give the usb socket another clean
dladz said:
Tried different cables, I think EDL mode is working.
Click to expand...
Click to collapse
well, it's a good sign , hopefully, it will be resolved out.
dewa5227 said:
well, it's a good sign , hopefully, it will be resolved out.
Click to expand...
Click to collapse
Yea I'm dreading it being hardware. Never had this issue on OOS.
I think it may be Evo X but I don't know.
Bad luck I guess
Cheers anyway.
So MSM did indeed work, it's booting now, obviously couldn't back up any of the info on the device so i'm super annoyed at that but so long as usb connectivity works then i'll be happy with that.
USB Connectivity does NOT work now so i CAN connect to EDL mode but not normal usb conenctivity.
Anyone have any ideas???
Cannot root, install anything via ADB or even delete apps via ADB. Shocking problem to have man
I'm RMA'ing my phone, just getting it set up now.
Very painful process, they absolutely need the purchase order for warranty, things have changed with 1+
3-10 days apparently, used to be 5 when i've sent it in the past.
On connecting a USB hub i can read USB sticks and i can control my phone with an xbox pad??
Am i missing something? How is all this working yet i can't mount my phone?
Best bet, probably you broke the charging port. did you by any chance use like force usb charging like that?
dewa5227 said:
Best bet, probably you broke the charging port. did you by any chance use like force usb charging like that?
Click to expand...
Click to collapse
I did use the force USB charging yes.. wishing I hadn't now..
I also connected to a usb-c to hub to connect a screen.
Issues kind of started after that.
Physically I haven't damaged it from movement. But could be from the forced charging
UPDATE:
Erm ok this is confusing???
I just connected my phone to a charger that is clearly not rated for it, in the hope it would shock the device, i then connected my phone and made a cup of tea, when i got back my phone showed me this (screenshot attached)
??? Lol what the hell? I've already booked my RMA lmfao
anyway, i shall keep an eye on it, i'll thoroughly test it and get it back up and running.
Strange, very strange.