i was following a video tutorial on youtube trying to upgrade my defy 2.2 to 2.3.7, while following the process i made a mistake and from that moment my mobile is continually restarting .......... plz any one help me with this problem !
Try to go to the Recovery again (Volume Button) and flash the ROM again after deleted all data and cache and dalvik cache. Afterwards delete the dalvik cache again.
If you're stuck on the red Motorola Logo you have to flash a sbf with your computer.
Hi,
i have a defy +, rooted and installed the last quarx cm10 nightly for the defy+ (not the second boot version, latest version from 24 sep). everything worked, had it in use for 2 days. then out of a sudden (can't remember really what i was using at that moment) the phone rebooted. not it is stuck at the cyanogenmod spinning circle logo with the led flashing red every 5 secs or so. i can get into recovery with vol down when led is blue at start.
i guess i could flash the stock rom (don't have my nandroid backup on card) but perhaps someone has a solution. already wiped cache and dalvik cache, didn't help.
try this
-Mount the SD card and upload the lasted cm 10 quarx build
-First Wipe data , cache , dalvik
-Format /system is very important with this removes the old ROM totally (DON'T REBOOT THE PHONEEE !!! )
-Flash the ROM and try if works
lexer98 said:
try this
-Mount the SD card and upload the lasted cm 10 quarx build
-First Wipe data , cache , dalvik
-Format /system is very important with this removes the old ROM totally (DON'T REBOOT THE PHONEEE !!! )
-Flash the ROM and try if works
Click to expand...
Click to collapse
thx, had to reflash in the end, root again... no card reader for microsd..
Hello, I recently bought a used working perfectly defy +
after a couple of days I root it, 2ndinit installed, backup of my rom, and put the latest version of CM10 quarks ...
I tried it a bit and I did not like, so I have downloaded a cm7.2 and tried to flash following the guides, restart, locks on the red motorola logo .... retested with different wipe, nothing to do
I try to flash a wiui but with the same result ....
i do a restore of my rom, but when I reboot always hangs on the motorola logo red
Now I tried to flash using RSD Lite the DEFYPLUS_U3_4.5.1-134_DFP-139_ _Service1FF .... reboot and unfortunately the phone goes in loop, turn on, motorola logo appears with the animation, the animation ends and restarts ....
the battery was charged to 90% before these operations now i want to be sure of what I have to do
Help me
toroloco73 said:
Hello, I recently bought a used working perfectly defy +
after a couple of days I root it, 2ndinit installed, backup of my rom, and put the latest version of CM10 quarks ...
I tried it a bit and I did not like, so I have downloaded a cm7.2 and tried to flash following the guides, restart, locks on the red motorola logo .... retested with different wipe, nothing to do
I try to flash a wiui but with the same result ....
i do a restore of my rom, but when I reboot always hangs on the motorola logo red
Now I tried to flash using RSD Lite the DEFYPLUS_U3_4.5.1-134_DFP-139_ _Service1FF .... reboot and unfortunately the phone goes in loop, turn on, motorola logo appears with the animation, the animation ends and restarts ....
the battery was charged to 90% before these operations now i want to be sure of what I have to do
Help me
Click to expand...
Click to collapse
I think your problem can be the filesystem format.
If you were o last Qarx Rom that is on 2ndboot and this use the EXT4 format for filesystem.
If you wanna install CM7.2. WIUI or Stock ROMs, you need get back to the EXT3 FS.
For that to work, is good that from recovery format data/cache and dalvik on ext3 followed by WIPEs,
then, flash the custom CM7.2 WIUI or other non 2nd Boot ROM.
To format, you need go to your BootMenu and select Tools ===> File System Tools and
Format DATA and CACHE in ext3 :> This erase your data and apps but you can back to whatever non 2nd Boot ROM for your phone.
I hope this help U.
(Sorry my bad English, in beginner on 2nd language)
R: brick my defy+ ???? help me
Thank you for your help but my defy+ now is in bootloop....
No rom inside
Inviato dal mio GT-I8150 con Tapatalk 2
Have you tried one of the methods from this thread under "Common problems/questions"? Good luck
toroloco73 said:
Thank you for your help but my defy+ now is in bootloop....
No rom inside
Inviato dal mio GT-I8150 con Tapatalk 2
Click to expand...
Click to collapse
If you have bootloop then wipe data/cache and dalvik from recovery. If problem persist re-flash the sbf after a total wipe.
after a wipe data/cache now my defy+ works with stock rom......
but why can't i install cm7 after install cm10....
toroloco73 said:
after a wipe data/cache now my defy+ works with stock rom......
but why can't i install cm7 after install cm10....
Click to expand...
Click to collapse
because of different form format of partitions you need to wipe data/cache and dalvik from stock recovery! just before flashing and for safety is good to do even after flash
pgreed said:
because of different form format of partitions you need to wipe data/cache and dalvik from stock recovery! just before flashing and for safety is good to do even after flash
Click to expand...
Click to collapse
first i rooted my defy+, then installed 2ndinit, than into cwm wiped data/wipe cache, wipe davil cache, then i flashed cm10.1
after 2 days i wiped data/wipe cache and the i flashed cm7.2..... bootloop
wiped data/cache and tried to restore my rom.... bootloop...
flash sbf.... bootloop
wipe cache.... ok
toroloco73 said:
first i rooted my defy+, then installed 2ndinit, than into cwm wiped data/wipe cache, wipe davil cache, then i flashed cm10.1
after 2 days i wiped data/wipe cache and the i flashed cm7.2..... bootloop
wiped data/cache and tried to restore my rom.... bootloop...
flash sbf.... bootloop
wipe cache.... ok
Click to expand...
Click to collapse
when you passed from CM10 to CM7.2 you must format data/cache to ext3 and that can be done from STOCK recovery and not from custom
pgreed said:
when you passed from CM10 to CM7.2 you must format data/cache to ext3 and that can be done from STOCK recovery and not from custom
Click to expand...
Click to collapse
or just follow the steps that Anarkista7 mentioned above (his English ain't that bad )
R: brick my defy+ ???? help me
pgreed said:
when you passed from CM10 to CM7.2 you must format data/cache to ext3 and that can be done from STOCK recovery and not from custom
Click to expand...
Click to collapse
Ok and then? Flash sbf with pc ?
Inviato dal mio GT-I8150 con Tapatalk 2
edit: fixed it. went into custom recovery with pressing volume down when the blue light turns on and reflashed everything
hi
my name is jason and i own a defy+. i flashed a few devices over the last 2 years (2x i9000, i9001, 2x i9100, Defy+, Desire HD, ...)
but now im stuck.
i tried to install cm10.1-20130415 nightly from http://forum.xda-developers.com/showthread.php?t=1768702
i also downloaded gapps-jb20121011 for jb4.1.2
i booted into custom recovery and did a wipe data and wipe cache and wipe dalvik cache.
then i flashed the ROM and after that i flashed Gapps.
then i rebooted and i have to unlock my sim card.
after that the process gapps and the setup wizard stops working and crashes.
i only know how to go into the stock(?) recovery (volume down + power until android symbol, then vol up+down)
i did a wipe data and wipe cache. no changes.
i can't install zip from sd through this recovery.
please help me
Hi!
Im still in problem.
When flash any mod or theme or give a change, before i wipe dalvik cache i have a lot of bootloop.
Starts the couting update of aplicattions that occurs rapidly and before ending restarts again.
Can anyone help me?
Im in g900m with omega rom.
Sorry for my bad english