I tried to repair a friends 5360L because it stopped reading the SD cards sometimes, however now the signal is always 1 bar and it wont show 3g or EDGE.
The FW i used was downloaded from SAMfirmware and the same model I had. 5360L from movistar latin america.
After a lot of researching I've tried more than 10 different firmware and the signal is still the same. I know is the modem file that was wrong for my country, but I cannot find the right one.
Please Help.
wtfwtflol said:
I tried to repair a friends 5360L because it stopped reading the SD cards sometimes, however now the signal is always 1 bar and it wont show 3g or EDGE.
The FW i used was downloaded from SAMfirmware and the same model I had. 5360L from movistar latin america.
After a lot of researching I've tried more than 10 different firmware and the signal is still the same. I know is the modem file that was wrong for my country, but I cannot find the right one.
Please Help.
Click to expand...
Click to collapse
its not the modem file.i have german with asian mixed on my phone and there was never any fail.what is your provider?
I have the same problem, but mine was that I flashed my s5360L with DXLC1 from Asia (Indonesia, Malaysia, Philippines, Singapore, Vietnam) and had almost no signal, one bar occasionally, I flashed it because with the stock ROM (UHKJ2_UUBKJ1_UHKJ2) restarts on standby, now I have UHKJ2 again but it keeps resetting so I would like to install the DXLC1 again maybe with the UHKJ2 modem or csc I don't know. But I don't know if it's possible without problems.
I solved my problem installing S5360B_UTLC2_ZTOLC1_UTLC1_by_Doky from brazil, and I'm from VNZ
Related
I have the i9000T HKTTT version of the Galaxy S.
In KIES, the original firmware was JG5/JG7/JG4.
After a stupid action, I bricked it but managed to get it in Download mode but flashed it with the wrong firmware. I am currently using the European firmware and got the CODE and CSC consistent with the default one but the European firmware has the PHONE version of jg1.
Where can I find jg7? Would piecing together these firmwares essentially get me back to the original factory settings? How do I set my CSC?
Thanks
take look at
http://www.samfirmware.com
you have to register (its free) there to have access to the firmware section.
regards
I have already been there. Either I don't know how to read the labels or they aren't present.
I am also stuck with a half-bricked i9000T... my carrier is Telcel, from Mexico. Does anyone know if there are any proper firmwares for latin american i9000T's?
Hey! I´m from mexico too. I have a i9000T with TELCEL and I have the firmware XXJVS from samfirmware working without problems, everything work fine, also 3G.
And I have tried a lot of Roms from the I9000 forums and almost everyone works fine too.
My phone came from vietnam and its stock rom is from vietnam when im using the phone on internet 3g etc it doesn't get hot at all..
after upgrading and testing from other Region firmware... my phone gets too hot..
Anyone... whats the difference on different region firmware? except the csc...
cause if its only the csc is different then... United Kingdom gets xxlj4 then other countries should get LJ4 but not ... others get LIH and LJ1
why is that so?
Anyone?
Guess not?
another difference is the modem that gets flashed with the firmware.
hence maybe try a different modem to start with, not sure if it will work out your heat issue though. you can find a modem collection here
Hello.
I need help with my i9505 phone. This phone was for france but i am living in greece and i could have very good signal (3g and lte) while it was on stock firmware. One day i decided to flash custom rom (cm11). Since then i have disconnections for my signal (even gsm only) with message no service. I tried to roll back to stock firmware using odin but i have the same results. I think my problem is csc because i cannot change with csc select. I am having an erro from csc select "does not support single csc".... Or something like that. Could someone help with this annoying situation? I would appreciate any advice or help..
aspros21 said:
Hello.
I need help with my i9505 phone. This phone was for france but i am living in greece and i could have very good signal (3g and lte) while it was on stock firmware. One day i decided to flash custom rom (cm11). Since then i have disconnections for my signal (even gsm only) with message no service. I tried to roll back to stock firmware using odin but i have the same results. I think my problem is csc because i cannot change with csc select. I am having an erro from csc select "does not support single csc".... Or something like that. Could someone help with this annoying situation? I would appreciate any advice or help..
Click to expand...
Click to collapse
Dial *#1234# if you are using stock rom and add the result here.
I am not using stock rom now. I am using cm11. I cannot use ussd codes.
I think You have to install proper modem for Your region.
Does modem is indepentent from hw and it has to do only with region..... Or i have to find a modem which is for my phone and my region???
When saying for my phone i mean that my phone is supposed that was for french market but i live in greece. This means that i have to find a french modem with multi csc so i can select eur csc?? Can someone help me which modem i have to flash?? There are a lot of them out there.....
Hi guys,
I am new to Samsung but like many I was tempted by the Note 4. I bought my Note 4 in Dubai (unlocked and not tied to any provider) but when I tried using it in the UK with a UK SIM (EE) I am not able to make/receive calls when set on LTE/WCDMA/GSM but I can when I select GSM Only. Samsung UK is not interested, Samsung Dubai poit me towards Samsung Egypt (because apparently this is an Egypt region phone) and Samsung Egypt do not understand what my problem is and keep sending my region unblock codes when the phone is not region locked.
Has anyone had this before and if yes what did you do to fix this?
AP: N910CXXU1ANK5
CP: N910CXXU1ANK5
CSC: N910COJV1ANK5
I have been reading a lot about rooting and flashing ROMs but being new to this I am not confident enough to get into all that. I hope there is a solution without the need for rooting !!!
KK2244 said:
Hi guys,
I am new to Samsung but like many I was tempted by the Note 4. I bought my Note 4 in Dubai (unlocked and not tied to any provider) but when I tried using it in the UK with a UK SIM (EE) I am not able to make/receive calls when set on LTE/WCDMA/GSM but I can when I select GSM Only. Samsung UK is not interested, Samsung Dubai poit me towards Samsung Egypt (because apparently this is an Egypt region phone) and Samsung Egypt do not understand what my problem is and keep sending my region unblock codes when the phone is not region locked.
Has anyone had this before and if yes what did you do to fix this?
AP: N910CXXU1ANK5
CP: N910CXXU1ANK5
CSC: N910COJV1ANK5
I have been reading a lot about rooting and flashing ROMs but being new to this I am not confident enough to get into all that. I hope there is a solution without the need for rooting !!!
Click to expand...
Click to collapse
There's recent update for dubai region, u can update & try may they resolved this problem. R u sure your Service provider supporting 4g for your sim?
jdomadia said:
There's recent update for dubai region, u can update & try may they resolved this problem. R u sure your Service provider supporting 4g for your sim?
Click to expand...
Click to collapse
SIM works on my HTC One and 4G signal here good so I do not think it is the SIM. I updated firmware two days ago using Kies but no change. I am starting to suspect some sort of network blacklisting by Samsung but not sure. I also spoke to my network provider and problem not with them.
I want to test the phone in Middle East first to make sure that it is not some hardware fault bit if not my only option may be rooting and flashing different ROMs. I am also hoping that Lollipop may solve it but no way to get it now as I am not rooted yet.
KK2244 said:
SIM works on my HTC One and 4G signal here good so I do not think it is the SIM. I updated firmware two days ago using Kies but no change. I am starting to suspect some sort of network blacklisting by Samsung but not sure. I also spoke to my network provider and problem not with them.
I want to test the phone in Middle East first to make sure that it is not some hardware fault bit if not my only option may be rooting and flashing different ROMs. I am also hoping that Lollipop may solve it but no way to get it now as I am not rooted yet.
Click to expand...
Click to collapse
Download Samsung phone info from play store, check your region, also you can check knox warranty is void? U can also check refurbishment check from same app, seems to me u purchased online, not from authorised store of dubai.
KK2244 said:
SIM works on my HTC One and 4G signal here good so I do not think it is the SIM. I updated firmware two days ago using Kies but no change. I am starting to suspect some sort of network blacklisting by Samsung but not sure. I also spoke to my network provider and problem not with them.
I want to test the phone in Middle East first to make sure that it is not some hardware fault bit if not my only option may be rooting and flashing different ROMs. I am also hoping that Lollipop may solve it but no way to get it now as I am not rooted yet.
Click to expand...
Click to collapse
This are the mine screen shot for dubai rom, u can compare.
Thanks for the screenshots. I compared with yours and it is now even more clear that mine is an Egypt phone. Do you know if I can flash the UAE firmware on my phone with or without rooting and if that would work so that the CP, SP and CSC are the same as yours rather than the Egypt ones?
KK2244 said:
Thanks for the screenshots. I compared with yours and it is now even more clear that mine is an Egypt phone. Do you know if I can flash the UAE firmware on my phone with or without rooting and if that would work so that the CP, SP and CSC are the same as yours rather than the Egypt ones?
Click to expand...
Click to collapse
Yes root is not required to flash U.A.E firmware, u will get all as mine, u need to clear cache & data before & after flashing through odin.
---------- Post added at 02:05 PM ---------- Previous post was at 02:02 PM ----------
KK2244 said:
Thanks for the screenshots. I compared with yours and it is now even more clear that mine is an Egypt phone. Do you know if I can flash the UAE firmware on my phone with or without rooting and if that would work so that the CP, SP and CSC are the same as yours rather than the Egypt ones?
Click to expand...
Click to collapse
Before u flash first match your imei dial *#1234# & under battery.
KK2244 said:
Hi guys,
I am new to Samsung but like many I was tempted by the Note 4. I bought my Note 4 in Dubai (unlocked and not tied to any provider) but when I tried using it in the UK with a UK SIM (EE) I am not able to make/receive calls when set on LTE/WCDMA/GSM but I can when I select GSM Only. Samsung UK is not interested, Samsung Dubai poit me towards Samsung Egypt (because apparently this is an Egypt region phone) and Samsung Egypt do not understand what my problem is and keep sending my region unblock codes when the phone is not region locked.
Has anyone had this before and if yes what did you do to fix this?
AP: N910CXXU1ANK5
CP: N910CXXU1ANK5
CSC: N910COJV1ANK5
I have been reading a lot about rooting and flashing ROMs but being new to this I am not confident enough to get into all that. I hope there is a solution without the need for rooting !!!
Click to expand...
Click to collapse
my friends have this similar problem and its fix
This is how "you need a working sim from the country when you buy the samsung phone"
all you have to do is make a international call for 15 minutes to the original country
example u bought the phone in egypt so u need a working egypt simcard just call the operator in egypt and listen to the operator for 15 minuts from UK after 15 minutes (make it 20 minutes just in case) turn off your phone and change it with the UK sim card
this method works for me
u dont need to flash or root the phone
just remember this method only work with samsung unlock phones from middle east
I am currently studying in China and a friend of mine from France came back after the last holiday with a GS4 I9505 from home. Apparently she was having trouble getting it to work on Chinese networks, so she took it into some place to have them fix it. Apparently they rooted it, changed the ROM and did who knows what else. After that, she said the phone not only wouldn't connect, but it was also very unstable, crashing constantly. I told her I have a GS4 (I have the I9505G) and could help her restore her phone. She wanted the regular stock Samsung software, no root or anything. So I used Sammobile.com to download a French (NRJ) version of the 5.0.1 firmware and flashed it to the phone. It appeared to work well, but when I put my China Unicom SIM in it, it would only connect to 2G. On my I9505G with stock 5.0, 3G connects without any problems. According to the Wikipedia GS4 page, the 3G frequencies used by the China Unicom variant are also used by the I9505 and I9505G. So when using the same SIM, I assume they should both have access to 3G. Would the French firmware be interfering with this? Do different firmwares have different modems that would be affecting this?
At the very least, I was able to restore the phone and get it to connect to 2G, but if I can completely fix the phone for her, I think that would be preferable. Any advice or shared knowledge about this issue is much appreciated.
i have S4 three UK version and i downloaded uk lollipop with different csc and pda and modem, but still it works like a charm