I have the i9000T HKTTT version of the Galaxy S.
In KIES, the original firmware was JG5/JG7/JG4.
After a stupid action, I bricked it but managed to get it in Download mode but flashed it with the wrong firmware. I am currently using the European firmware and got the CODE and CSC consistent with the default one but the European firmware has the PHONE version of jg1.
Where can I find jg7? Would piecing together these firmwares essentially get me back to the original factory settings? How do I set my CSC?
Thanks
take look at
http://www.samfirmware.com
you have to register (its free) there to have access to the firmware section.
regards
I have already been there. Either I don't know how to read the labels or they aren't present.
I am also stuck with a half-bricked i9000T... my carrier is Telcel, from Mexico. Does anyone know if there are any proper firmwares for latin american i9000T's?
Hey! I´m from mexico too. I have a i9000T with TELCEL and I have the firmware XXJVS from samfirmware working without problems, everything work fine, also 3G.
And I have tried a lot of Roms from the I9000 forums and almost everyone works fine too.
I honestly do not know if this is the right spot, but i do apologize in advance, I'm in desperate need of help. I've been at this for the past 2 days, I kid you not...
I bought a I9100M ( Bell) unlocked my carrier (Rogers) from a individual, he rooted it, but due to complications, He unrooted, However while researching, he actually installed the UK's i9100 official ICS. When I type in *#1234# i get the following:
PDA: i9100XWLPT
PHONE:I9100XXLQ6
CSC:I9100XEULPA
My main problem is that, even though the phone reads my rogers sim etc. My reception/signal is absolutely horrible. There is the odd time when I get good connection in a few spots,
So my question to you guys is this,
Since my phone is unrooted... and I have a european firmware package on my phone.. is there any " good/reliable " european modem which will allow me to use my Rogers in the TORONTO area? Or am i forced to put Bell firmware package back onto the phone in order for me to get good reception/signal?
I am completely new to Android and this is all confusing. So I do apologize once again.
I don't always ask for help online because I believe that whatever problem I have, someone out there already has it, so I just need to look better. Not this time though. I'm literally dying.
I've installed Custom ROMs before and reverted them back to stock before but it was on a Galaxy NEXUS. It was seamless.
I have a n900W8 Note 3, this is the canadian variant. After a long day, I managed to root it and install CWM recovery, but didn't install a custom ROM. The next day (today), I installed an AOSP ROM and it worked fine but I wanted a TouchWiz ROM. After trying out 2 and getting stuck in a bootloop, I went back to the AOSP ROM. I then tried one last one, X-NOTE. Apparently it wiped my internal storage. You should see what happened to me when I realized that.
So I now just want to go back to the stock firmware but that's not easy, because I live in Jordan, which is in the middle east, but my phone is a canadian variant. But, The CSC Code for it was TTT, which is for Trinidad and Tobago. Wait, there's more. When Installing X-Note, it asked me which CSC code do I want to install. it had 5 options I think and TTT wasn't one of them. I chose BTU which is for UK.
So now I want a firmware that isn't carrier locked so I can use whatever SIM Card I put in it.
There's this article, and it says :
"You might find 2 types of firmwares even within a particular model number. Such firmwares are generally known as Branded and Unbranded ones. If your device is locked to a network provider/carrier, it’s a branded device. Therefore you must install a firmware that is meant for your carrier. Similarly, if you are able to use any SIM card on your phone, it’s unbranded, and so you can install any firmware on it that is for unbranded Note 3.", well, how the hell do I know which one is branded and which one isn't :crying:.
Seriously guys, I'm desperate for help. The phone actually isn't mine, that's why I'm freaking out. I still have my Galaxy Nexus and I love it. Even after 3 years, it is still working perfectly. The developer support for it is absolutely amazing.
Hello everyone,
A Note 4 N9108V end up to my hands, but after using it i realised it cannot properly operate in my network.
It is a snapdragon variant, single-sim version for China Mobile, has lot of Chinese stuff totally useless if you are outside China and does not have Google apps also.
I manage to root the device, install custom CWM recovery, install a MIUI7 ROM that is quite good, install Google but still have problem with 3G coverage (and LTE ofcourse since in China LTE is different than EU)
I have 3G coverage, but if i will move to another location i will not be able to make calls, and i will also appear as unreachable if someone is calling me. Also data connection will not work. Later, it may work correctly for a while.
In GSM mode is working perfectly
I took it to a local repair center to check for hardware problem, they say that it is probably the baseband (modem) software that is designed specific for the China Mobile network, or there is a bug.
I tried all the available official ROMs and modems for this device (4.4.4, 5.0.1, 5.1.1) but nothing improved.
The only thing i manage to do is to have this amazing phone working only in GSM mode....
It is like having a Ferrari with pedals.
I am thinking if it is somehow possible to load the modem file for the EU model (N910F), and this may "unlock" the needed frequencies to operate correctly. Or even, if it possible to load the entire N910F or similar non-branded Note 4 formware to the phone, since i suppose the hardware is the same.
I tried to load this modem file and the n910F firmware with Odin but is not accepted, the procedure failed.
Any ideas, proposals etc?? (except of hammering the device, this will be my last option) :laugh:
Thanks in advance
I've searched the forums and no one seems to have an exact FIX for my issue. So I have a Galaxy Note 3 N9005 32GB black version, the phone works well in 3G, never had an issue with it but now my network provider recently upgraded their plan and offers 4G internet but my phone doesn't want to connect. The provider offers 4G through BAND 1 2100MHz and Note 3 N9005 does have that band but it doesn't want to connect. It only works on 3G and when I enable Mobile Data it says H+! Not once has it connected to 4G!
I wanna mention that my friend has the exact same N9005 phone and his phone works on 4G all the time. Both of us have the same contract with the same network provider!
The only difference between our phones is the CSC region, we have different CSC. MY SIM card works in 4G on his Note 3 and his sim card doesn't work on 4G on my phone. (we exchanged the SIM cards for testing). So the problem is from my phone not from the SIM card. My phone is also original, its not a Chinese clone! Its confirmed with "Samsung Phone Info" app from Play Store.
Here's a few things I already did that some of you may be inclined to recommend to me:
1 - My APN is correctly set
2 - I am on official stock Android Lollipop 5.0 latest version and the phone is not rooted
3 - I already did a factory reset + wipe cache partition
4 - I saw others suggesting that people may not be in the range of a 4G tower! Not the case! Like I said, I switched the SIM cards with my friend on a public bench, out in the open, not even behind walls. Of course and his phone connects to 4G with his SIM card and also with MY SIM card while my phone doesn't connect to 4G with neither of these SIM cards.
5 - In Mobile Networks > Network Mode, my phone is of course already set on 4G/3G/2G (auto connect) and by the way, my friend's Note 3 says LTE/WCDMA/GSM (auto connect) instead of 4G/3G/2G with the same language set on both phones. Why?? I know its the same thing and I know 4G stands for LTE and 3G for WCDMA but why does it appear differently on these phones?
6 - I already went to Service Mode via *#0011# and manually selected BAND 1 LTE, it says "no service" or "emergency calls only" if I do that so I switched back to "Automatic"
So what the heck is going on? This phone is giving me headaches! I'm close to smashing my phone! After this I sweared to my self this is the last Samsung phone I ever buy. Probably I will be switching to Asus or Lenovo in the future. Or any other phone that does NOT have this CSC BS! This CSC thing is a complete rip-off!
Im thinking that the problem could be my CSC perhaps?? My friend's Note 3 N9005 has a COA CSC (Cosmote Romania) and I have a XEF CSC (Unbranded France). Both phones are factory unlocked and work in all networks. They are not branded by any phone maker! His COA CSC is unbranded. Yes it belongs to a phone retailer but that retailer doesn't brand their phones, no bloatware, no SIM lock. If you buy a phone from Cosmote (with COA CSC) it works in all networks, unlike Vodafone or Orange who lock their phones and brand them.
What should I do? Should I attempt to change my CSC? If so, how? My phone warranty has expired a long time ago, so I shouldn't care that much about triggering Knox though not triggering it would be preferred.
Which path should I pursue? Should I simply use ODIN and flash a STOCK COA CSC (Cosmote Romania) or STOCK ROM CSC (Unbranded Romania) from SamMobile.com with the latest version of Lollipop? Would this trigger Knox? Will it affect my all networks unlocked status? I mean, I won't have to unlock it after that, right???
OR should I ROOT my phone, change CSC, then UNROOT? If so do you know of any method to root Lollipop 5.0 without triggering Knox?
What do you guys think? Whats the problem with my phone? Why doesn't it work on 4G? Because of CSC? Or is it something else?
Thanks!
The best way to confirm the model # would be to boot into Odin mode and look there.
audit13 said:
The best way to confirm the model # would be to boot into Odin mode and look there.
Click to expand...
Click to collapse
What do you mean? Can you be more specific? I already told you my model number, its N9005!! Do you want a screenshot?
Dear OP, have you tried the other Samsung secret code? *#2263# then program it to accept LTE only.
That's the only foolproof way to get the Note to connect to LTE. In my country I only get 2-3 of the 5 LTE bars, so the Note wouldn't automatically connect to LTE or immediately stoop down to 3G through the settings. That specific secret code and setting is LITERALLY THE ONLY WAY TO GET MY NOTE 3 TO CONNECT TO LTE IN MY EXPERIENCE.
If that still doesn't get your phone to run LTE, either your carrier is whack or your phone is, and no amount of Cyanogenmod can fix it because your hardware modem inside the phone might be whack and you can't really do anything if that's the case...
Sent from my Galaxy Note 3 using XDA Labs
Odeira.Oloap said:
Dear OP, have you tried the other Samsung secret code? *#2263# then program it to accept LTE only.
That's the only foolproof way to get the Note to connect to LTE. In my country I only get 2-3 of the 5 LTE bars, so the Note wouldn't automatically connect to LTE or immediately stoop down to 3G through the settings. That specific secret code and setting is LITERALLY THE ONLY WAY TO GET MY NOTE 3 TO CONNECT TO LTE IN MY EXPERIENCE.
If that still doesn't get your phone to run LTE, either your carrier is whack or your phone is, and no amount of Cyanogenmod can fix it because your hardware modem inside the phone might be whack and you can't really do anything if that's the case...
Sent from my Galaxy Note 3 using XDA Labs
Click to expand...
Click to collapse
I have already explained that there is nothing wrong with my carrier because I switched my SIM card with my friend's phone who has exactly the same N9005 model and it perfectly works on 4G on his phone. The only difference I could find in our phones is the CSC.
As for the other suggestion you sent me, I already said that I've been to SERVICE MODE. The code you've given me does nothing on my phone but as I can see from your screenshots, it gets you to SERVICE MODE. I've already been there through *#0011# switched to LTE/GSM only or LTE/WCMA only and I've explained that it still doesn't do anything.
Can someone please answer me this? Would it help if I change the CSC? Could this be the problem I'm having???
It may help if your CSC is changed it can do no harm .
JJEgan said:
It may help if your CSC is changed it can do no harm .
Click to expand...
Click to collapse
Ok, thanks! So how do I do this?
My phone warranty has expired a long time ago, so I shouldn't care that much about triggering Knox though NOT triggering it would be preferred.
As far as I know there are 2 methods to change the CSC. So how should I do it?
Should I simply use ODIN and flash a STOCK COA CSC (Cosmote Romania) or STOCK ROM CSC (Unbranded Romania) from SamMobile.com with the latest version of Lollipop? Would this trigger Knox? Will it affect my all networks unlocked status? I mean, I won't have to unlock it after that, right???
OR should I ROOT my phone, change CSC, then UNROOT? If so do you know of any method to root Lollipop 5.0 without triggering Knox?
Thanks
Booting into download mode will confirm the model #. Looking under the ROM's settings is not guaranteed to display the proper model #.
Both phones are running the same ROM, bootloader, and modem?
audit13 said:
Booting into download mode will confirm the model #. Looking under the ROM's settings is not guaranteed to display the proper model #.
Both phones are running the same ROM, bootloader, and modem?
Click to expand...
Click to collapse
Yes confirmed, same model, same baseband, same everything. The only thing different is the CSC. So whats next?
Did you try changing the csc by dialling *#272*enter IMEI#? Not sure if this method will work for your model of note 3.
audit13 said:
Did you try changing the csc by dialling *#272*enter IMEI#? Not sure if this method will work for your model of note 3.
Click to expand...
Click to collapse
No I haven't I'm trying now. Wow if this works Im gonna buy you a beer!
It doesn't work! just my luck! I entered this code: *#272*IMEI-number# and pressed call button, it says "Connection problem or invalid MMI code."
I just tried it on my Note 2 and S4 and it works. Maybe the phone is not running a multi-csc stock ROM?
I don't have a note 3 to try.
audit13 said:
I just tried it on my Note 2 and S4 and it works. Maybe the phone is not running a multi-csc stock ROM?
I don't have a note 3 to try.
Click to expand...
Click to collapse
Perhaps the code you gave me only works on older version of Android such as KitKat or whatever you have on Note 2... anyway Im using Samsung Phone Info app from Play Store and my CSC is XEF and under Available CSC Codes there is a bunch of CSC codes. Here I've made a sccreenshot:
From as far as I know there are only 2 ways to change the CSC: root or flash a different stock ROM
Yes, the note 2 has kit kat but the s4 is running stock lollipop.
audit13 said:
Yes, the note 2 has kit kat but the s4 is running stock lollipop.
Click to expand...
Click to collapse
Well unfortunately the code doesn't work on my phone. Anyway if you know for a fact, could you tell me this? Is it safe to reflash another STOCK rom from sammobile? Will it affect my phone in any way?
Thanks
Yes, it is safe to flash stock ROMs from sammobile.com.
I just flashed a local stock ROM and guess what, when I go to Phone Info app it still shows the same CSC! I still have XEF CSC, how can this be? Why hasn't the CSC change?
After flashing the stock rom, did you try the csc code I mentioned? Same thing happens when I flash a Rogers carrier rom over a Telus carrier rom. Once I select telus as the carrier from the csc menu, the Rogers app will disappear and the Telus app appears.
Ok after further researching I found a lot of interesting stuff so I'm gonna write it all down for other people who may need it in the future.
1 - If you have a multi-CSC phone and you flash a different CSC but which is in your "Available CSC" list but which you cannot choose or change without root, your CSC will NOT change. For example: I have flashed ROM CSC (Open Romania) on my XEF CSC (Open France) and guess what after the flash was successful and all, the CSC didn't change! It was still on XEF because ROM was in my "available list".
2 - If you try to flash a different CSC which is NOT in your list, then Odin will FAIL and softly brick your phone. For example: I got my phone bricked, trying to flash 2 CSCs which are not in my "available list": COA (Cosmote Romania) and DBT (Open Germany). In order to fix this issue all you have to do is to reflash YOUR OWN CSC, in my case it was XEF. Or you can even flash one of those CSC which are "available" or compatible so to say, such as "ROM" for example.
This is the firmware I currently have on my phone:
http://www.sammobile.com/firmwares/download/61565/N9005XXUGBOK6_N9005OXXGBOJ2_XEF/
These are the two firmwares I tried to flash on my phone, hoping to replace XEF with:
http://www.sammobile.com/firmwares/download/63441/N9005XXUGBOK6_N9005COAGBOK1_COA/
http://www.sammobile.com/firmwares/download/61464/N9005XXUGBOK6_N9005DBTGBOI1_DBT/
BOTH FAILED in Odin!
There are ONLY 2 ways to change the CSC on newer Samsung phones. Most guides online are based on KitKat 4.4 or older guides but for 5.0 Lollipop or even NEWER there are ONLY 2 ways to change your CSC:
1 - Root your phone and change the CSC. There are plenty of guides on how to do that online.
2 - You can avoid rooting your phone and use Odin instead, BUT accompanied by your stock firmware, you will also have to find and use a PIT file because Samsung as of 5.0 Lollipop uses different partitions for all the different regions. HOWEVER messing with PIT files is super risky and it can permanently brick your phone so its just better to root your phone instead! Dont waste your time trying to flash different regions/csc which is not in your available csc list, it won't work!
What can I say? Samsung is trying hard to block their users from changing their CSC... Why? They prefer their users buy new phones. Its pure greed yes but its what it is... For me, this was the last Samsung phone I ever buy. Im truly disappointed.