Hi there all. My Galaxy S i9000 is frozen on the downloading screen. It was connected to Odin previously to install CWM recovery but it just stayed on this DL mode. I try to connect to Odin to solve the problem but nothing happens when I connect to computer. Not picked up by Odin, and computer doesn't recognize the device. I have previously installed the driver but the computer doesn't recognize it tells me. I have tried unplugging and reconnecting to no avail. Any help, tips or tricks would be extremely appreciated.
Darthvoda said:
Hi there all. My Galaxy S i9000 is frozen on the downloading screen. It was connected to Odin previously to install CWM recovery but it just stayed on this DL mode. I try to connect to Odin to solve the problem but nothing happens when I connect to computer. Not picked up by Odin, and computer doesn't recognize the device. I have previously installed the driver but the computer doesn't recognize it tells me. I have tried unplugging and reconnecting to no avail. Any help, tips or tricks would be extremely appreciated.
Click to expand...
Click to collapse
Try a different USB socket.
BLADESMAN1889 said:
Try a different USB socket.
Click to expand...
Click to collapse
Yes I tried that. The computer recognizes that there's a device connected, but it doesn't recognize what it is. Even though I previously installed the driver.
What happens when you pull the battery then restart, it can't be booting into download mode??
GT-I9000 / SEMA / SLIMBEAN2.3
Hi have you tried resetting both pc and phone, then trying the procedure again. .
If not maybe a usb controller/hub is at fault.
Sent from my GT-I9000 using xda premium
When I pull the battery and restart it, it is at the soft brick screen, the little picture in centre screen of a mobile and a pc. I can only get it to the downloading screen from there, nothing else.
The pc can recognize other things so the USB seems ok.
Darthvoda said:
When I pull the battery and restart it, it is at the soft brick screen, the little picture in centre screen of a mobile and a pc. I can only get it to the downloading screen from there, nothing else.
The pc can recognize other things so the USB seems ok.
Click to expand...
Click to collapse
try the various solutions to resolve it, from My Android solutions, link below
If you are on Windows, plug phone into PC while in download mode. Go into 'Devices and Printers' , right click on the device, select properties and then the hardware tab, then choose properties again. Go to the driver tab and update driver. After driver has successfully updated, unplug usb and pull your phones battery. Put battery back in and boot back into download mode, then try using Odin again. Hope this works (has for me in the past).
Ok thanks for all the replies. I just finished work. Now I uninstalled driver & plugged it in again while in DL mode. Windows installed the driver. But it came up as "Gadget Serial" It doesn't seem to recognize it as a mobile? When I go into the properties I'm unable to click "update driver".
Ok so Odin seems to recognize something there now as you can see in blue. Now what do I do?
Darthvoda said:
Ok so Odin seems to recognize something there now as you can see in blue. Now what do I do?
Click to expand...
Click to collapse
Flash a rescue kit from My Android Collections (link below) and you should boot up, if you like to have CWM add is a semaphore kernel
xsenman said:
Flash a rescue kit from My Android Collections (link below) and you should boot up, if you like to have CWM add is a semaphore kernel
Click to expand...
Click to collapse
There's nothing in some of them. I tried the Rescue Kit for i9000 using heimdall packed by ldq. No luck. I don't really know what I'm doing lol.
Now looping title screen
Ok so I managed to reboot but now it's doing the boot loop. Stays on Galaxy S screen for 3-4 seconds. Not long enough to play a sound or anything though.
Darthvoda said:
There's nothing in some of them. I tried the Rescue Kit for i9000 using heimdall packed by ldq. No luck. I don't really know what I'm doing lol.
Click to expand...
Click to collapse
use the Mirror link, if a main link is broken....
---------- Post added at 07:12 AM ---------- Previous post was at 07:11 AM ----------
Darthvoda said:
Ok so I managed to reboot but now it's doing the boot loop. Stays on Galaxy S screen for 3-4 seconds. Not long enough to play a sound or anything though.
Click to expand...
Click to collapse
use the solution from My Android Solutions
xsenman said:
use the Mirror link, if a main link is broken....
---------- Post added at 07:12 AM ---------- Previous post was at 07:11 AM ----------
use the solution from My Android Solutions
Click to expand...
Click to collapse
Thanks for your help. When I use Odin the i9000 goes back to looping title screen as soon as Odin gets to RESET.
Darthvoda said:
Thanks for your help. When I use Odin the i9000 goes back to looping title screen as soon as Odin gets to RESET.
Click to expand...
Click to collapse
Not getting what you are implying here, you mean Odin does not complete the process or phone does not stay in download mode for it to complete the flashing process or??
xsenman said:
Not getting what you are implying here, you mean Odin does not complete the process or phone does not stay in download mode for it to complete the flashing process or??
Click to expand...
Click to collapse
So I put phone into DL mode, hook it up to Odin, when Odin's flashing it says KERNEL in the first box at the top, then goes to the blue RESET in the same box, then the phone resets and starts looping again, so then that's all that happens.
I just flashed 512 PIT again, it went to PASS but same result....boot loop.
Darthvoda said:
So I put phone into DL mode, hook it up to Odin, when Odin's flashing it says KERNEL in the first box at the top, then goes to the blue RESET in the same box, then the phone resets and starts looping again, so then that's all that happens.
Click to expand...
Click to collapse
so you are only flashing a kernel and that does not solve your problem, next solution would be for you to flash a ROM with PIT, download the Ezbase Rescue kit and flash it with the 512 Pit File ( repartition will be ticked automatically when you use a PIT File)
---------- Post added at 04:23 PM ---------- Previous post was at 04:22 PM ----------
Darthvoda said:
I just flashed 512 PIT again, it went to PASS but same result....boot loop.
Click to expand...
Click to collapse
you need to have a ROM with the PIT file
xsenman said:
so you are only flashing a kernel and that does not solve your problem, next solution would be for you to flash a ROM with PIT, download the Ezbase Rescue kit and flash it with the 512 Pit File ( repartition will be ticked automatically when you use a PIT File)
---------- Post added at 04:23 PM ---------- Previous post was at 04:22 PM ----------
you need to have a ROM with the PIT file
Click to expand...
Click to collapse
Ok I will try that. Uncheck repartition?
Related
Hi I installed the root for my s 4 i9505 but i used the i9500 and now it is stuck on the kies thing. I was wondering if there was anything i could do and also if someone has the pit partition for the h3g stock rom i could try that way. Any help is appreciated.
Try to flash back your stock Rom with odin, should be fine.
metzo32 said:
Try to flash back your stock Rom with odin, should be fine.
Click to expand...
Click to collapse
i have tried that but it keeps on saying there is no pit partition. Do you know where i could get the pit file?
you don't need to get complicated. just download an official firmware that is Odin compatible, and then install in odin (open is as PDA).
before that, shut down the phone (keep power pressed). restart in download mode (volume down, menu then power), with cable plugged out. you will go to the download screen. connect the cable, start odin... and there you are... (at least this is what I did with mine when I got stacked to the kies screen)
okty2k said:
you don't need to get complicated. just download an official firmware that is Odin compatible, and then install in odin (open is as PDA).
before that, shut down the phone (keep power pressed). restart in download mode (volume down, menu then power), with cable plugged out. you will go to the download screen. connect the cable, start odin... and there you are... (at least this is what I did with mine when I got stacked to the kies screen)
Click to expand...
Click to collapse
I will try that again and get back to you. I am downloading an official firmware now and will try that.
worker99 said:
I will try that again and get back to you. I am downloading an official firmware now and will try that.
Click to expand...
Click to collapse
good luck!
and maybe, if that does not work, an forced update via kies might still do the job....
okty2k said:
good luck!
and maybe, if that does not work, an forced update via kies might still do the job....
Click to expand...
Click to collapse
How do i do a forced update via kies? Kies does not recognise my phone when i have it connected. Should i try connecting the usb to the back of the computer rather than the front?
Try Flashing another Kernel
sadekmefti said:
Try Flashing another Kernel
Click to expand...
Click to collapse
What if i was to flash the stock rom via odin but also have re partition checked? What will that do?
worker99 said:
What if i was to flash the stock rom via odin but also have re partition checked? What will that do?
Click to expand...
Click to collapse
I don't know exactly what that would do.
You cannot flash another kernel, as there is none yet.
You need to be in download mode for kies to recognize (volume down, home, power). It should work to do Emergency firmware recovery in Tools.
Anyway, I am quite sure that running from Odin works. Have you tried to follow the steps I mentioned?
okty2k said:
I don't know exactly what that would do.
You cannot flash another kernel, as there is none yet.
You need to be in download mode for kies to recognize (volume down, home, power). It should work to do Emergency firmware recovery in Tools.
Anyway, I am quite sure that running from Odin works. Have you tried to follow the steps I mentioned?
Click to expand...
Click to collapse
No still at work finish in 20 mins. I have tried all that yesterday but Odin still kept on saying no partition thing and kies I did the emergency firmware recovery but it did not connect to the phone. I will try again but this time connect the usb to the back of the computer.
Do not flash with re-partition only in an EXTREME case !
sadekmefti said:
Do not flash with re-partition only in an EXTREME case !
Click to expand...
Click to collapse
what will it do if i do? as i am getting frustrated as then the phone will be a £600 paperweight
Repartition is supposedly going to wipe all data on your phone, but it's also a death button that makes you ODIN freeze and making your phone not boot up so proceed with extreme caution
It uses the .pit file to repartition the space the pit file holds how much to allocate to /system, /data. If you leave it blank and flash, it'll drop the files your flashing into the existing 'slots'. If you select the pit file and repartition, it'll reallocate.
Only select that if the instructions for your rom require you to do it.
Thanks it works. I put the usb lead at the back of my pc and installed the stock rom thanks for your help guys
worker99 said:
Thanks it works. I put the usb lead at the back of my pc and installed the stock rom thanks for your help guys
Click to expand...
Click to collapse
You are welcome!
idk what happened i let my phone die and i went to plug it into the charger
when i try to turn it on it shows the samsung screen with the unlock icon then it says rebooiting recovery
it shows a little android guy with it laying down and a (caution type icon) with the androids stomach open or something
and i guess im in the recovery menu
it says
reeboot now
apply update from ADB
wipe cache and ect.
what do i doo! !
im trying to connect it to kies but it just keeps saying connecting with the thing spinning on the computer!
it could be from xposed framework
ANYONE?
lilmikey201 said:
idk what happened i let my phone die and i went to plug it into the charger
when i try to turn it on it shows the samsung screen with the unlock icon then it says rebooiting recovery
it shows a little android guy with it laying down and a (caution type icon) with the androids stomach open or something
and i guess im in the recovery menu
it says
reeboot now
apply update from ADB
wipe cache and ect.
what do i doo! !
im trying to connect it to kies but it just keeps saying connecting with the thing spinning on the computer!
it could be from xposed framework
Click to expand...
Click to collapse
Just try to boot in Download Mode and use ODIN to restore to Factory.
lilmikey201 said:
ANYONE?
Click to expand...
Click to collapse
You might want to familiarize yourself with the search function in the future...
http://forum.xda-developers.com/showthread.php?t=2279062
what question are you trying to ask? i missed it.
---------- Post added at 07:50 PM ---------- Previous post was at 07:45 PM ----------
erasat said:
Just try to boot in Download Mode and use ODIN to restore to Factory.
Click to expand...
Click to collapse
good answer, and if you don't un-install that worthless keis before running odin, you will be right back here asking why it didn't work. save yourself some time.
noob here
erasat said:
Just try to boot in Download Mode and use ODIN to restore to Factory.
Click to expand...
Click to collapse
How do you do that? I'm new to this and am getting the same message? Also I downloaded the program ODIN but don't know what check boxes I should do and what to click.
TheHelmetDancer said:
How do you do that? I'm new to this and am getting the same message? Also I downloaded the program ODIN but don't know what check boxes I should do and what to click.
Click to expand...
Click to collapse
Same as before...
http://forum.xda-developers.com/showthread.php?t=2261573
Phone fixed, please delete the thread.
3S0PHAGOOS said:
I changed my ROM from stock to 4.4.2 ROM but I got so many issues so changed back to stock ROM, but my LG G2 only has now only 10gb of internal memory.. [I got 32gb lg g2] Now, i tried the instruction from the guy here
http://forum.xda-developers.com/showthread.php?t=2470207&page=3
and also this
http://forum.cyanogenmod.com/topic/...s-on-internal-storage/page__st__20#entry67870
I tried to do the steps as instructed but the result is not the same as mine and then i just exit ADB... then i restart my phone and booomm...
my phone died can't on at all even on download mode... when i try download mode it's just USB Not recognize... please help me ((((
Click to expand...
Click to collapse
Try connecting the phone to a wall charger for 15 mins,and then power up the phone.
nimrodsv said:
Try connecting the phone to a wall charger for 15 mins,and then power up the phone.
Click to expand...
Click to collapse
didn't work, as expected
3S0PHAGOOS said:
didn't work, as expected
Click to expand...
Click to collapse
At the second thread its for HTC incredible, i hope you didnt flashed anything from there right?
Honestly i have no idea what you can do, but trying to eliminate some of the cases..
EDIT: you should try the first method ( http://forum.xda-developers.com/showthread.php?t=2470207&page=3 ) when using this files: https://www.dropbox.com/sh/3pqceuaqsji0dqn/nvR20mLqMF
if that what you did and it didn't worked im guessing that flashing the firmware wont help, but there are wiser people than me to help you, just wait for their input
nimrodsv said:
At the second thread its for HTC incredible, i hope you didnt flashed anything from there right?
Honestly i have no idea what you can do, but trying to eliminate some of the cases..
EDIT: you should try the first method ( http://forum.xda-developers.com/showthread.php?t=2470207&page=3 ) when using this files: https://www.dropbox.com/sh/3pqceuaqsji0dqn/nvR20mLqMF
if that what you did and it didn't worked im guessing that flashing the firmware wont help, but there are wiser people than me to help you, just wait for their input
Click to expand...
Click to collapse
I can't flash anymore, My LG G2 is completely dead, can't get into recovery and download mode, if I tried going to download my pc just say "USB NOT RECOGNIZED"
I've used the following to completely restore my phone and untrip the root checker...
Verizon: http://forum.xda-developers.com/showthread.php?t=2448960
Others: http://forum.xda-developers.com/showthread.php?t=2432476
Xyriin said:
I've used the following to completely restore my phone and untrip the root checker...
Verizon: http://forum.xda-developers.com/showthread.php?t=2448960
Others: http://forum.xda-developers.com/showthread.php?t=2432476
Click to expand...
Click to collapse
did your phone totally bricked when you did it? or you can still go to the download mode?
cause mine is totally can't on.
Do you have the LG bootlogo coming up, if so try this:
(Something similar happened to mine, and I hope this will help.)\
Turn off phone, then when off, hold down power and volume down button until it reaches the LG logo and then release and hold it down again, if that doesn't work, when just hold it down until you see a screen that says something like: Hard reset/ factory reset. For me it took me to my recovery screen, where I just flashed a older ROM onto it, and you should be fine. I then later flashed a recovery file. I hope this helps, and if you need it any clearer, just reply :fingers-crossed:
If it's saying usb not recongized I'd recommend installing the proper drivers for your specific model. Which model do you have since you didn't specifying? Also, dead or charged your phone should boot download mode with volume up being held and plugging the phone in via usb to your computer.
---------- Post added at 08:22 PM ---------- Previous post was at 08:21 PM ----------
If it's Verizon, follow that posted method above correctly. Check for correct com port numbers and make sure replacing the dll file your in the c: drive and not just in your download folder.
hiddenfive said:
Do you have the LG bootlogo coming up, if so try this:
(Something similar happened to mine, and I hope this will help.)\
Turn off phone, then when off, hold down power and volume down button until it reaches the LG logo and then release and hold it down again, if that doesn't work, when just hold it down until you see a screen that says something like: Hard reset/ factory reset. For me it took me to my recovery screen, where I just flashed a older ROM onto it, and you should be fine. I then later flashed a recovery file. I hope this helps, and if you need it any clearer, just reply :fingers-crossed:
Click to expand...
Click to collapse
My phone is completely off
ceredics said:
If it's saying usb not recongized I'd recommend installing the proper drivers for your specific model. Which model do you have since you didn't specifying? Also, dead or charged your phone should boot download mode with volume up being held and plugging the phone in via usb to your computer.
---------- Post added at 08:22 PM ---------- Previous post was at 08:21 PM ----------
If it's Verizon, follow that posted method above correctly. Check for correct com port numbers and make sure replacing the dll file your in the c: drive and not just in your download folder.
Click to expand...
Click to collapse
I have the D802, I already installed the drivers.
If I'm going to go to download mode, It says USB not Recognized and my phone is completely off.
I don't have too much experience with that model so hopefully someone else spying has more information. Sorry buddy.
There is no bootlogo at all? Not even when you turn it on? Try plugging it into a wall charger and if anything happens, also try changing your COM # to 41, if it isn't its Device Manager<Ports (COM & LPT), right click< properties< port settings< advanced..< COM 41, this was from this article I will link right here: http://forum.xda-developers.com/showthread.php?t=2582142
Hope this helps :good:
@3S0PHAGOOS how you did the fix?
cpaixao said:
@3S0PHAGOOS how you did the fix?
Click to expand...
Click to collapse
yes please enlighten us....I am going through the same process and I can not turn it on at all. NOthing comes on...
Send it to me, but if I fix it I get to keep the phone. Right?
Sent from my SM-T210R using XDA Premium 4 mobile app
3S0PHAGOOS said:
Phone fixed, please delete the thread.
Click to expand...
Click to collapse
How did you fix it?
Those experiencing this problem could try this
https://www.youtube.com/watch?v=E7zbs6of_4I
Btw, you should share the solution for those who are in the same situation.
Hi guys i bought an s5 sm-g900f from a local site here in italy and it wont boot on.
It doesnt turn on in recovery mode but only in download mode
Pls help me :good:
First, take out the battery, look around the panels and write down the model and the serial number of your device. Should look something like this:
Model - SM-G900F
S/N - RF2G40TB8SM
Put the battery back in and boot to Download mode by holding the Power, Home and Vol DOWN keys, and when it boots press the Vol UP. Connect the phone to your computer.
Then download the official Samsung Kies 3, if you haven't, and open it up. Go to Tools menu, and click on Firmware Upgrade and Initialization. In the next window enter your Model, then your S/N and after a couple more buttons, Kies will begin downloading the official stock rom for your device.
It's kinda big, like 2 gigs or more, so have that in mind if you're on a metered connection.
After it's downloaded, Kies will then transfer the rom on your phone, install it and reboot. And that's it.
Go in download mode. Run Odin and flash a stock ROM
i7vSa7vi7y said:
Go in download mode. Run Odin and flash a stock ROM
Click to expand...
Click to collapse
It doesnt work.
When the procedure completes and its the write "PASS" it boot and boot again the same problem :crying:
Double check it says G900F at the top of the screen in download mode
If yes, flash this PIT file along with a stock ROM
http://forum.xda-developers.com/attachment.php?attachmentid=2721101&d=1399024091
Flash both at the same time with ODIN 3.11.1
PIT in PIT section
ROM in AP section
I did it :crying: still the same problem :crying::crying::crying::crying:
*detection* said:
double check it says g900f at the top of the screen in download mode
if yes, flash this pit file along with a stock rom
http://forum.xda-developers.com/attachment.php?attachmentid=2721101&d=1399024091
flash both at the same time with odin 3.11.1
pit in pit section
rom in ap section
Click to expand...
Click to collapse
i'm doing this, i will answer u after couple minutes
I forgot to say that the battery is broken and the phone turns on only if connected to pc/charger
*Detection* said:
Double check it says G900F at the top of the screen in download mode
If yes, flash this PIT file along with a stock ROM
http://forum.xda-developers.com/attachment.php?attachmentid=2721101&d=1399024091
Flash both at the same time with ODIN 3.11.1
PIT in PIT section
ROM in AP section
Click to expand...
Click to collapse
I did it! When it starts the write recovery booting... in blue appears but it doesnt boot on :crying:
i dont know what to do
You need to get a new battery. You should never flash with battery less than 80 percent. It could run your phone.
i7vSa7vi7y said:
You need to get a new battery. You should never flash with battery less than 80 percent. It could run your phone.
Click to expand...
Click to collapse
i bought a new battery..i did the process and when it appears the string reboot on odin the phone boots recovery booting and reboots still the same problem :crying::crying::crying:
Try doing it on a different usb port and also a different usb cord
---------- Post added at 01:43 AM ---------- Previous post was at 01:42 AM ----------
Also right click Odin and run as administrator
i7vSa7vi7y said:
Try doing it on a different usb port and also a different usb cord
---------- Post added at 01:43 AM ---------- Previous post was at 01:42 AM ----------
Also right click Odin and run as administrator
Click to expand...
Click to collapse
I did all the passages....it still dosnt work
Have you tried using Samsung kies
Try flashing stock ROM then boot to recovery. After installation keep the battery in and hold vol. up, power button, homebutton.
Sent from SM-G900Pkltespr
I was have same problem i done anything and used box either bla bla bla bla bla bla bla but never boot in system and recovery so i gave up and sold the phone :crying:
:crying::crying::crying: i dont wanna sell it
Any solution? Same issue. I've tried odin Jodin kies smartswitch and heimdall. It boots and says recovery booting. ....
Then reboots to the same screen. Recovery booting. ...
Never boots to recovery and only get download mode. Odin says pass. I'm at a loss here. Any help to be offered would be great..
somedays ago, i rooted my samsung galaxy grand prime (sm-g531f). which is processed by flash twrp via odin, & then flash supersu via twrp recovery.
after root, i erroneously add google account, so that frp lock was on. and top of that when i go to recovery mode its shown "custom binary blocked by frp".
so, solve this problem (bcoz i already solve this many time on many phone), i go to download mode, and i try to connect my phone via usb cable in pc, but everytime it say "usb device not recognized", but when my phone was switched on (before locked by frp), it also not recognized by usb but it was charging..
so, now:
*i cant switch on my phone
*cant go to recovery mode
*cant connect by usb cable
*i tried on many usb cables
*two laptops
*install/unistall samsung mobile drivers many times
but, nothing wasnt solved my problem..
if anyone also faced this problem, and solved this, please share your valuable process in this thread.. and help me...
Update-1: now i even change my phone's usb connector if anything could happen, but again my bad luck.. nothing happen, means usb not recognized..
Update-2: sorry i was offline or forgot to update my condition. I was tried to fix it via many mobile hardware technichian. And at last, i fixed my problem by change my whole motherboard. Bcoz, the all technichian told me that, it was my phone's cpu which have problem. For that, it couldn't recognize by any pc.
Do u have another samsung phone? If yes then try this connect that phone to your laptop or pc let it be recognised anf when thatd done removed the port from that phone and immediately connect your phone in download mode. This worked for me. If that doesnt work tell me ill look for another solution
waleeds1 said:
Do u have another samsung phone? If yes then try this connect that phone to your laptop or pc let it be recognised anf when thatd done removed the port from that phone and immediately connect your phone in download mode. This worked for me. If that doesnt work tell me ill look for another solution
Click to expand...
Click to collapse
bad luck, its not worked for me...
aamnahid said:
bad luck, its not worked for me...
Click to expand...
Click to collapse
This might be stupid but try it worked for many people. Boot your phone in download mode connect it to your pc open odin and without removing the cable remove the battery of your phone. Your screen wont go off , and if odin recognizes your phone put the battery back. It might not work but still give it a try
waleeds1 said:
This might be stupid but try it worked for many people. Boot your phone in download mode connect it to your pc open odin and without removing the cable remove the battery of your phone. Your screen wont go off , and if odin recognizes your phone put the battery back. It might not work but still give it a try
Click to expand...
Click to collapse
this was also not worked...
I have the same problem and my battery is built in unfortunately any suggestions please
Abdul.82 said:
I have the same problem and my battery is built in unfortunately any suggestions please
Click to expand...
Click to collapse
I'm having this exact problem also. I've downloaded usb drivers for Samsung, i've downloaded kies, ive tried 5 different computers and 4 different cords. No computer even recognizes it (but it does charge) and only one computer says couldn't recognize usb device.
Currently i'm stuck in the google loop of trying to login with an ID that you've previously used on this device and when i enter in the correct info it just keeps looping back to that screen, so i cant even get into the phone to debug or choose MTP connection etc.
The only reason i pulled out the grand prime and started working on it, was i rooted my s6 and s5 and i wanted to keep learning so i pulled out the grand prime and realized its powerful enough to run updated software so it doesn't have to be a paperweight anymore.
Me too I have same problem bro plz help me
FIX for FRP LOCK USB Not Working
The only way to fix that I have gotten to work is to download the stock firmware and Flash using ODIN. I had to try a few different cords but it will eventually work!! Keep trying!! I did the BL the AP the CSC and the CP, went into download mode and ONLY STOCK FIRMWARE works ok!
---------- Post added at 09:51 PM ---------- Previous post was at 09:49 PM ----------
DionWhite33 said:
The only way to fix that I have gotten to work is to download the stock firmware and Flash using ODIN. I had to try a few different cords but it will eventually work!! Keep trying!! I did the BL the AP the CSC and the CP, went into download mode and ONLY STOCK FIRMWARE works ok!
Click to expand...
Click to collapse
it took me a few minutes to figure this out after flashing Root with CF auto didnt work nor did TWRP. So I tried the Samsung Smartswitch and no luck..
hi ,did you find a solution to the frp lock and usb not recognising?